Navigating in the 12 periods

Hello,
I have a problem. How can I navigated by all periods (12 periods) of a year with my characteristic ZMV_TC that have only a validity period (0datefrom and 0dateto)? I don't want to insert the Master Data for the diferent periods, because I will have to many data!
I am trying to construct a KP in the BEx, that I can use for navigating by the 12 periods of the year. This KPI is based on a key figure that is inserted in the characteristic ZMV_TC as atribute. This characteristic ZMV_TC is in his turn an infoprovider of the multiprovider where I am creating the KPI.
Thanks in advance!
Best Regards!

If you check out this previous thread, it should help you:
https://discussions.apple.com/message/23961862?tstart=0#23961862?tstart=0

Similar Messages

N95 Navigation/Paying/Trail Period...etc

Right, after reading loads of posts, prior to posting this, I think I have finally got it...so a simple yes/no would suffice.
The navigation on the N95 you get working by downloading the maps application via the nokia site and installing in your phone. Once you have done this you can update bits using WiFi or what ever system you like (or use the PC nokia mapper and upload a whole map to your phone). Once you have enough info on the maps you can find places and run routes.
Easy. You pick a place to route to and route from. GPS usually finds itself after a minute or so and you view the route, and run it etc etc.
This works for about 3 days, without purchasing the Navigation Voice. I was under the impression that this was totally free and all you needed to do was upload stuff. If you wanted the voice then you had to pay, but you still got the rest. Well, I was happy without using the voice but it seems you DO need to purchase the voice after the trial period is up (£47 a year).
I understand the theory and the costs in that with some systems you pay for map updates but on Nokia you won't. Still, it's a bit annoying when I've just filled my memory with maps! Still, it's good for searching for pubs if you are lost in London!
Bertie.

Depends how much you will be using it i suppose.
The navigation on the N95 is sufficient for me as I only use it on odd occasions. If I was using a sat nav everyday, I would probably go for the tom-tom or garmin just because of their screen size and the ease of keeping the tom-tom for sat nav at the N95 for my phone instead of using the N95 for everything.
The N95 does the job though and £52 for 3 years is pretty good value even if you only use it a handful of times each year.
Might be an idea to get hold of a in car charger if you're going to use it on long journeys though.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

No data in IT0007 during the period 05.05.2010 - 31.05.2010

Hi experts,
When i am running PY simulation for a particular employee who has joined as trainee a year before and was confirmed on 05.05.2011 I am getting error in log saying No data in IT0007 during the period 05.05.2010 to 31.05.2010. Pls brief me to overcome this issue ASAP.
Thanks in advance
Upensap

Please go to PA30 select the IT0007 and go for overview
check the start date of the records, check if there is data for the mentioned period in the error?
if not maintain it .
from which date the employees payroll is going to start?

When the asset is sold in the mid of the period, how the depreciation is ca

when the asset is sold in the mid of the period, how the depreciation is calculated as you can not run AFAB in the mid of the period.

Adding to the above reply, when the asset is sold in the mid period, during such sale process, based on the period control, depreciation till the date will be computed by the system and adjusted.

E613 SYST: You cannot determine the period for rule 03

Dear All,
We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction, Period control '03' is missing for fiscal year variant K4. Period control is exisiting in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing. all other period control keys are available.
question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
thanks
Sunil

message went abruptly before I finish.
+++++++++
continuing from previous email
Period control 01 has following entry in the transaction
Fiscal Year Variant Per control Name of the period control Year Month Day Period Mid Month
K4 01 Pro rata at period start date blank 0 0 blank not selected
If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who have implemented assets module for US with tax dep, they might have encountered this issue.
thanks
Sunil

Adding a Left Navigation in the place of Current navigation in SharePoint 2013 Site.

Hi All,
I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site.
But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
nav like the SharePoint Current Navigation alternative but within my Page Layout.
Is there an option to chat within these forums?
Could someone help me to solve this problem?
Thanks and regards,
Chiranthaka

Hi Chiranthaka,
Thank you for posting in MSDN forum.
Since
this forum is to discuss: Visual
Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue,
it is more related to the sharepoint, so I’m afraid that
it is not the correct forum for this issue.
In addition, I find that you have been posted this issue in this SharePoint forum:
https://social.msdn.microsoft.com/Forums/en-US/7e3af32b-2bf8-41f5-9420-9265ed64458c/adding-a-left-navigation-in-the-place-of-current-navigation-in-sharepoint-2013-site?forum=sharepointgeneral ,
so we will merge this case to the above case, I think that the SharePoint expert will follow up your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Parent (Global) and Current (Navigation) on the Same Page

Hello,
I am using the managed metadata feature in a SharePoint 2013 publishing site. I am trying to layout my navigation as shown in the diagram below. I can not find a publishing master page that implements this parent child relationship. My
top navigation is use the markup:
<PublishingNavigation:PortalSiteMapDataSource ID="topSiteMap" runat="server" EnableViewState="false" SiteMapProvider="GlobalNavigationSwitchableProvider" StartFromCurrentNode="false" StartingNodeOffset="0"
ShowStartingNode="false" TrimNonCurrentTypes="Heading"/>
<SharePoint:AspMenu ID="TopNavigationMenu" runat="server" EnableViewState="false" DataSourceID="topSiteMap" AccessKey="<%$Resources:wss,navigation_accesskey%>"
UseSimpleRendering="true" UseSeparateCss="false" Orientation="Horizontal" StaticDisplayLevels="1" AdjustForShowStartingNode="true" MaximumDynamicDisplayLevels="1" SkipLinkText=""/>
I have tried using the same markup, using a different StartingNodeOffset and SiteMapProviders, for the side menu with no success.
Thanks,
Bob

Hi,
According to your post, my understanding is that you wanted to create Parent (Global) and Current (Navigation) on the Same Page.
You can make quicklaunch work contextually like structural nav quicklaunch using Managed Metadata navigation. Please refer to:
Managed Metadata Navigation - How do you make quicklaunch work contextually like structural nav quicklaunch?
In addition, you can used JQuery and CSS to achieve staticlevel left navigation in SharePoint 2013.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/forums/sharepoint/en-US/54edc501-0594-49e3-86b2-40ecf72bc68e/show-2-level-hierarchy-in-managed-navigation-menucurrent-navigation-in-sharepoint-2013
More information:
Overview of managed navigation in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to open the period who has already closed in MM

hi All
i have got problem regarding open and close period
Posting only possible in periods 2007/07 and 2007/06 in company code
but i want to post my material in period 2007/06 and 2007/05
plaese hepl me out how open period again after closing the period
thanks in advance

Hi,
This question has been already answered in this forum......
Deatiled process is:
1. Lock all users out of PRD
2. Take snapshot of MB5L for all materials at company code for current and previous periods
3. Add User parameter MMPI_READ_NOTE with value = current date in this format YYYYMMDD
4. Stop all processing that updates inventory values
5. Run t-code MMPI with correct period
6. Run Z_DEl_HIST_ENTRIES program
7. Take MB5L snapshot for all materials at company code fs01 for current and previous periods
8. Validate that values match on MB5L pre-post snapshots or are appropriate.
9. Unlock all users in PRD
10. Remove User parameter MMPI_READ_NOTE from user ID
Regards,
Sachin

How to Post and Close the Period ?

Master,
I have Problem in <b><u>MB1C</u></b>, as Posting Period Problem .
Give me Solution.

Check the transactions :
MMRV : For this transaction, enter the company code. The t-code would give you information as to the period in which the posting can happen. Also, one can set if posting is to be allowed in the previous period.
MMPV: For this transaction, enter the company code and the period/year or the current date. The transaction would close the previous period and open the period with the current date. Though in case the period to be closed is older than one month, the subsequent periods need to be closed before the period with current date can be open.
Example: Say the last period open is 01st Oct 2006, the current date is 29th Jan 2007 and the period for the company is set as months. The steps to be followed are as follow:
1. close the period for the month of Nov.
2. Close the period for the month of Dec
3. lastly, open the period for the month of Jan 2007.
Regards,
Gauravjit.
Reward points if the solution is helpful

How to Open & Close the periods in Asset Accounting for Depreciation.

Dear All,
How to to How to Open & Close the periods in Asset Accounting for Depreciation ? Please let me know
If there is any T.Code or procedure for it.
Your help is highly appreciated.
Thanks & Regards,
Pankaj.

Dear Alex ,
1) I am facing one problem that one of my asset 123 I Capitalized on 13.09.2006 have deactivated on
14.05.2008. with value of Rs.1.00.000/- all the activities are closed down related it on deactivation date.
In 2009 a new asset 456 purchased with different value. But in T.code OARP in column cumulative acquisition
value it is showing value of Asset 123 instead of it's own capitalization value.
2 ) And about my Asset 123 it is also showing a Cumulative Acquisition value in year 2009 which it
should not display because I have already deactivated that asset. ( The same checked in AR03 )
Please help.
Your help is highly appreciated.
Regards,
Pankaj.
P.S :- Keep the discussion on for further assistance.

Changing the period in Reversed payment document

Dear All,
I badly need your help. I have reversed one Payment document in wrong period. Now Payment document is in period 09 while reversal document is in period 10.
Is there any way to undo this reversal or else change the period in the reversed document?
Here I need one suggestion as well. What will be the implication of this in period end closing activity?The payment document is closed and refering to reverse document as well.
What I know is for period closing system checks for only open items.
Please suggest on this.
Regards
Suchitra

Dear Gordon,
Even If I go to F-02 and do manual entry for period 09. Then my f-02 document will have status as open, In this case in month end closing this open item will create problem.
Can I cancel or delete the wrongly reversed document any ways in SAP?
Regards,
Suchitra

A/R, A/P and MM for the periods

Dear All,
I closed all periods for A/P, A/R and MM for July 2009 so no-one could post to them. However, because the GL was still open for June, July and August, it allowed others to post to A/R; A/P; MM. When closing the periods we have to leave the GL open for month-end closing Journal Entries. How do we keep others from posting to what we believe were closed periods?
Please clarify me.
Regards
Partha

Look here,
     From Acct     To acct.             Fr period     Year     To period     Year
+                                                       7     2008     8     2009
A                    ZZZZZZZZZZ     1     2009     8     2009
D                    ZZZZZZZZZZ     8     2009     8     2009
K                    ZZZZZZZZZZ     8     2009     8     2009
M                    ZZZZZZZZZZ     8     2009     8     2009
S                    ZZZZZZZZZZ     7     2009     8     2009
This is the case, system alowing to posting June and July also.
Regards
Partha

Want to be able to lock a period but still edit orders for the period

Version: (Please provide the current version)
2007A PL 41
Description of requirements: (Please provide a detailed description)
Customers require the ability to be able to go into open sales orders or purchase orders and make changes even though those orders are in a prior period that is locked or in closing as they were able to do in 2005.
Business needs: (Please describe the impact on your business, if the functionality is not realized)
By leaving a period unlocked or unlocked except for Sales, users are not prevented from accidently or intentionally being allowed to post journal entries or possibly documents to a period that would have been closed if it did not prevent the user from going back to change old sales orders.
Examples: (Please describe a typical example, how the functionality should work.)
The user should be allowed to lock or close a prior period and still be allowed to go back into sales orders or purchase orders from that period and make changes if they are still open.
__Current Workaround:__ (Please describe the workarounds you are using at the moment)
Leave the period unlocked which creates a risk of entries being done to periods which should be closed.
Proposed solution: (Please suggest how the new functionality should work)
Please see example above.

I don't understand you.
I have a similar situation and I use views to restrict access depends on the users. I filter columns, the usersnever see the table (all columns) only the columns defined in the view
HTH

Automatic Posting of All Open GR/IR A/c at the period end

Dear Experts,
We have a requirement for IT Act Provision.
1. All Open Credit Purchase documents(for which MIRO has not been done) to be automatically transferred to a A/c called Current Liability & Provision(Clearing Account) on the last date of the period(Month end)
On the first day of next period all such open credit purchase documents line items to be created in GR/IR Account against which users can do MIRO when invoice is received.
2. All open Debit GR/IR line items to transferred to Advance A/c (Clearing A/c) on the last date of the month and again to reversed line item wise to GR/IR account.
What is the settings to be done please advise.
Regards,
Alok

Dear Mr Obviar,
Thanks for you reply,
In that OBYP setting:- there are three columns:-Recon A/c -
Adjustment A/c -
Traget A/c
Please correct me if I am wrong:-
I want GR/IR credit to be transferred to some Clearing A/c
then I shall put GR/IR GL code under Recon A/c
and Clearing A/c GL code under Traget A/c
What shall I put under Adjustment A/c
Please extend your help.
Regards,
Alok

Navigating in the 12 periods

Similar Messages

Maybe you are looking for