Navigation links are visible to all groups even after applying specific target audience group in to links at sharepoint 2010 publishing site

Hi ,
Any one please help me on why the global navigation links are visible to all group users even after applying a specific target audience group to the link. I Checked , User profile service and User profile synchronizing services
and they are running fine. Test environment is running fine even both the services are not running. Please let me know is any relation should be there between target audience and User profile services?
I am wondering that the Target Audience is not working in global navigation suddenly in production server and the same is working in test server.
Thanks & Regards,
NareshRaju YV,
Infosys.

Hi NareshRaju,
Did you add SharePoint Groups to Target Audience ? if yes please refer http://social.technet.microsoft.com/Forums/sharepoint/en-US/7862f182-c6a2-4d2e-9025-b11514575ac3/audience-targeting-for-navigation-link-issue?forum=sharepointgenerallegacy and
you will get solution
Let us now if this helps, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Similar Messages

Firefox, running on Mac. I'm getting limited info on page displays on all sites, although links are in fact all there - just invisible.

Running Firefox on Mac: I'm getting limited info on page displays on all sites, although links are in fact all there - just invisible.
== This happened ==
Every time Firefox opened
== Firefox, running on Mac. I'm getting limited info on page displays on all sites, although links are in fact all there - just invisible. ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Locking this thread, so all answers are posted in your other thread. :-)
https://support.mozilla.com/en-US/forum/1/669587

The Outlook links do not connect to Firefox even after setting the customize option in Default Programs. Please help.

The''' Outlook links do not connect to Firefox '''even after setting the customize option in Default Programs. Please help.

Message to Toad-Hall
Thank you, for that. To be sure, I tried your suggestion, and selected "System Proxy" as the choice, for Thunderbird and Firefox. Rebooted, and looked at the outcome.. NO Joy.. :-(
I believe that I shall send the output of the Error Log in my next post. Perhaps someone can point me in the right direction after looking at the Error.log.
Thank you...Toad Hall. If you think of something else to try, I am ALL ears.. I shall keep trying..

Price Condition&Price update are disabled in S.O even after partial invoice

Dear All,
We are using manual pricing condition in the Sales Order, when we do a partial delivery and billing for a Sales Order line item, the update prices function (button) is inactive and price conditions are greyed out.
We are using Pricing Type "C" in the VTFL item copy from Delivery to Billing.
Even after partial quantity invoicing from the Sales Order there will be pricing changes and users will need to enter manual price for the item that is partially invoiced.
Currently system does not allow any change in the manual price condition as the all the price conditions are greyed out in the S.O even if partial qty of the line item is invoiced.
Please let me know what needs to be done to enable manual condition entry and Price update functions in the Sales order even after partial invoice quantity of the line item in the Sales Order.
Regards
Venkat

Hai Venkat,
This is the standard functionality and system treat like
sales order conditions once invoiced should be freezed.
As a work around you can do like
in sales order order
Go to Item - Shipping
Part.dlv./item B Create only one delivery (also with quantity = 0)
Max.Part.Deliv. 1
This make only one delivery for the line item
Considering if you have a material Sales order of 2 KG and you added some manual price.
And you are doing partial delivery of 1 KG and Invoiced.
Now user can use the same sales order and create a new line item of the same material and can enter the balance qty and change the condition which is not grayed out.
Regards,
Mani

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

File is visible in content server even after deletion

Hi
After a file has been deleted, it is still showing on the Search Results page. Although when I click on the Info button or the file Id, it shows the following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
How to ensure that the deleted file is also removed from the search results page?
Regards
Pradeep

When I do a collection rebuild, the following error occurs:
Indexing aborted at 8/4/13 10:50am. Aborting index build. Too many errors with finding and copying files to the appropriate place.
Due to failure of indexing, files are visible even after archiving. Please help.

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but it didn't load at all, not even after 3 hours.. so i tried to disconnect to phone, but the loading meter is still there, like it has frozen, what should I do ?

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?

Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.

Fields are still in EDIT mode even after Saving the Transaction in UI

Hello Experts ,
We are facing one problem in UI .
We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
Can anyone give some pointers/solution to this ?
Regards
VB

Hello,
if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
Best regards
Manfred

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

Unable to delete a SharePoint 2010 My Sites content Database and IIS Web Site even after changing timeout

Hi,
I am currently having issues with deleting a content database for mysites which has web application http://<servername>:11100. The database was migrated from sharepoint 2010, but on creating web app it timed out (was corrupt due to this). Problem
is I cannot delete now as I get "Request Timed Out". Even when I try just deleting the Web App or the Content Database individually. I have already updated the timeout on the Central Admin App Pool to 300. This used to work, but no joy now. Seems
like ever since I added this My Sites Web App I am getting this problem.
The setup is 1 Database Server (64GB), 1 Admin Server (24GB) and 3 WFE Servers (12GB each) - all VMS. System is also running PowerPivot. Central Admin is running on a WFE server. Is this setup OK for just one user? Reason I have 3 WFE is this already existed
and App Servers will be scaled out when we start testing. Running 11 Web Applications.
Help appreciated - any ideas?
Thanks.
John.
OH - I tried to delete with powershell and it tells me it requires SHarePoint Administration Service to be running, but the problem is it is already running on the WFE with Central Admin on.

Hi John,
The timeout may cause this issue. But would you let me know the error message when we delete the database?
However, you can delete the web application(my site host) and click delete database and IIS web site option.
Also, you can try to clean cache and check if issue persists:
Please stop SharePoint Timer Service.
Please navigate to the cache.ini file location:
Delete all the .xml file and only leave cache.ini in the file location.
Edit the Cache.ini file and set it to 1.
Save the Cache.ini file
  Start SharePoint Timer Service. The cache file will be created autumnally.
Any questions, please let me know.
Best Regards,
Dats Luo

Embed metatag navigation with API or Web Part in SharePoint 2010 web site or site navigation

Is it possible to embedd the metadata navigation of a dokument libary via API or webpart flexible and unfolded into SharePoint 2010 site navigation or in an other area of the SharePoint Webseite?

Hello Mayank,
If you want to display content within a site collection then you can also use CQWP and dataview webpart but if you want to show content in different site collection then you have to create custom webpart.
You can also try with codeplex webpart:
http://crosssiteviewer.codeplex.com/
For creating own webpart, please look at here:
http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

System msg that are visible for all users

Hi
Does any one know how to create a system msg, that users logged on to ex. /rep, /rwb will see, in ABAP i know you can use SM02, but how to do it in J2ee im lost.
Thanx for your info.
//Tord

Hi,
AFAIK, you can set the System Msg for SLD (SLD -> Administration -> System Message), but not for IR/ID.
Yep, as mentined by Ricardo and there is one more option "Display System Message".. it means, we can create system messages.. i guess try to look in VA, may be u may get an option to create this there.
Message was edited by:
Vijaya Lakshmi MV

SC still visible in check status even after GR and Invoice

Hello all,
We are on SRM 4.0 SP 4.0.
Normally SCs for which GR and invoice has been done should not be visible in the SC check status application if you dont select the "Include completed shopping carts". TBut in some cases though we have selected the "Delivery Completed" indicator in backend PO but still there are some shopping carts still visible in check status application in SRM. The values for the GR and invoice should have status of "Fully confirmed".
For such shopping carts when i manually run the report BBP_GET_STATUS_2 it replicates the correct status and the SCs disappear from the SC check status application.The BBP_GET_STATUS_2 and the CLEAN_REQREQ_UP programs are scheduled every 5 mins.
Any hints or ideas will be much appreciated.
Best regards,
Sambit

Hi Sambit,
In Check status, in extended search check whether the incuding completed shopping carts check box was checked or not.
If the check box was checked then even the completed shopping carts get displayed.
Please let me know if this is not the case.
Rgds,
Teja

Is there a way for my MMS message phone numbers not seen by whole group even after turning off group messaging?

I send messages to a group of people but they are all able to see each other's phone numbers and they can't tell who is sending the message because on their iphone all the numbers appear and I have turned off group messaging. Is ther a way to prevent that from happening?

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

How to keep custom drawbot ui visible in comp window even if applied effect is not selected?

Hey guys!
Time for another noob question.
I'm trying to keep my custom ui visible in the comp viewer window even if the user has deselected the effect with the ui overlay.
My experimental effect plugin is based on the CCU example project. I modified the DrawHandles function in CCU_UI.cpp to do my test drawing.
Its working fine, but anytime I deselect the effect, AE stops drawing it on the comp. I tried modifying DrawEvent() to skip the event_extraP->contextH->w_type check, but the ui still goes away.   I tried just calling the DrawHandles() function in CCU's Render() function, but this causes AE to crash. I think its exploding when DrawHandles() is trying to get a surface context, but this is just a guess from the error it reports on crash:
                    ERR(suites.DrawbotSuiteCurrent()->GetSurface(drawing_ref, &surface_ref));
Any tips?
Perhaps I could do my ui drawing in the Render function and burn it into the render buffer, but I would need to check to make sure NOT to draw the UI if AE is actually rendering the comp (preview or output to disk). I don't have any idea what object would tell me that.
thanks and happy friday!
-Andy

Thanks for your help Shachar.
I've made some progress on this, but I've hit a wall. :\
In my effect's globalSetup() I check the itemID for the parent comp that the effect's layer lives in. I store this in the effects' global data.
In my effect's Render() method, I check to see if the active item's ID is the same as the one stored in the global data.
This works interactively, ie: the ui burnins happen if the comp with the effect is active, and if the comp is not active, or a nested comp, the burnins do not occur.
However, during ram preview & rendering, checking the active item's ID doesn't seem to return the proper ID, so the burnins still happen.
I wonder, during ram preview/render, is the comp no longer active? (I'm guessing this is whats happening)
If this is the case, is there some other object that I can look at to know specifically which comp is getting rendered/ram previewed, so I can use that information as a trigger instead of:
ERR(suites.ItemSuite6()->AEGP_GetActiveItem(&active_itemH));
I assume some object getting passed along to my Render() method can at least tell me which (parent) comp AE is trying to render?
thanks!
-Andy
Thanks!

Navigation links are visible to all groups even after applying specific target audience group in to links at sharepoint 2010 publishing site

Similar Messages

Maybe you are looking for