NCS reports based on AP groups

Hello,
I am wondering if it is possible to create reports in NCS and have them filtered according to AP Groups created on a WLC.
I am wanting to generate reports based on the AP's in certain AP Groups.
If it's not possible by using the WLC AP Groups, is there another method to create a criteria/filter in NCS based on a group of AP's
Thanks in advance for any help or suggestions.
Cheers,
Jeremy Keen

Please refer to AP summary reports from the report section
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/reps.html#wp1138497

Similar Messages

List of customer report based on account group - T.Code

Dear Guru's
I need list of customer report based on account group in standard SAP if it there please update th T.Code as earl as possible.
regards,
bhanu

Hello,
I don't think there is a standard report for this. SE16 select table KNA1 and check for the entries with respect to account group.
Prase

Report based on Material group

Dear all,
Actually our Business wants a report based on the material group and G/L account.
For each material group what are the accounting documents generated and the G/L account triggered with amount.
Example :
mat.grp G/L account(121001) G/L account (121002)
NUFW 3000 INR 2000 INR
Please can anyone suggest me
What will be my logic to generate a report and how can i extract data
Regards
subhash
Edited by: subhash karipi on Oct 24, 2008 11:49 AM

hi,
use ME2N-with selection para meterWE101
if required use dynamic selection......

BI Reporting based on Interchangeability group

Hello all,
Does anyone know if it is possible to extract interchangeability data in BI and to use them in reporting? If so, please tell me how it is possible.
Thank you very much.

Hi,
Its is possible to extract interchangeability data in BI and to use them in reporting.
Option 1 .Generate a DataSource from the Planning area where you have all these data for Interchangeability (like Sub orders)and taking this as a virtual cube you can create queries for BI reporting .
Option 2 . Take a scheduled backup from the planning area where you have interchangeability data (like Sub orders) and create queries on this backup cube.
Regds,
Digambar

Creating a performance report based upon a custom group

I am trying to create a simple performance report based on a SCOM group that I created, however when I run the report the relevant data cannot be found. When I look at the group membership I see a list of Windows servers. I then go into a generic
performance report, add a single chart, and line series, and select "Add group" and then search and select the SCOM group I created. I then add % processor time for 2008 systems as my rule. However when the report is run, no relevant
data is found. Performance reports run fine when selecting "Add group" and selecting the members of the group themselves.
My suspicion is that it is trying to run the performance report based on the group object and not the members of the group. Is there anyway that I can accomplish this? Perhaps via XML?
Keith

Hi,
For your reference:
Creating Useful Custom Reports in OpsMgr: How to create a custom performance counter report for a group of servers
http://www.systemcentercentral.com/creating-useful-custom-reports-in-opsmgr-how-to-create-a-custom-performance-counter-report-for-a-group-of-servers/
SCOM reports on performance counters for large groups of servers
http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers
Regards,
Yan Li
Regards, Yan Li

Commision based on item group & customer group

Dear all,
Does anyone have an idea about how to get commission based on item group & customer group sales?
My customer wanted commission report based on item group or customer group & based on payment collection dated.
Example
Term given for customer A is 30 days.
12/3/09 Inv 1000   RM 10,000   30 days payment
20/4/09 Inv 2000 RM    5,000   60 days payment
The term given is 30 days of the invoice month.
Salesman will get commission if get the collection at May'09 for Inv 1000, & July'09 for iinv 2000 based on the invoice date month.
The salesman get commission at any date of the month May'09. More longer collection, less commission they will get.
Example:
Salesman A
Customer Group             1st of the month, 2nd of the month, 3rd of the month, 4th of the month
Normal Dealer                         1.5%         , 0.75%,              0.00%                   ,    -0.25%
Sub Distributor                       0.5%         , 0.25%,               0.00%                  ,    - 0.25%
Any idea?
Thanks in advance?
Regards,
Eric Tan

Hi Eric
SAP does not calculate commissions, but merely provide a mechanism to report on it. The multi level calculation you require can be achived with a custom query linked to a report layout. Standard SAP will not provide this type of calculation. You will need to look at the open transactions such as invoices and link to the relevant payment transaction to get the payment date. Then compare this date to the invoice due date to determine if the terms were adhered to or not. If not payment date - due date in number of days will be needed to calculate the effective commission percentage.
Kind regards
Peter Juby

Report based on a reord group - PROBLEM

Using Reports Server / Forms/Reports 6i
I am trying to run a report based on a record group on the web. It fails giving the error 'Cannot run report.'
The report is called from a form and the record group is passed as a data parameter. It works fine in Client/Server.
I have tried to remove the data parameter and run the report without it but, despite working in the Client/Server environment, it still fails on the Web.
Does anyone have any suggestions?

I have found the answer to my problem in the forms forum!
Apparently, this type of report won't work on the web and I have to use temporary tables!

Group a report based on a hierarchy level

Hi,
I'm struggling with a query that I'd like to group a report based on the selection of a hierarchy level.
Here's the situation: I've got a table with a "normal" hierarchy, say the EMP table from SCOTT with its EMPNO and MGR columns. What I'd like to have is a report that gives me the sum of the SAL column group by all members on a given hierarchy level. So fi, if I choose LEVEL = 1, Id like to see the overall total, if I choose LEVEL = 2, I'd like to see the sum of salary of all employees managed by this respective manager etc.
I know that there are possibilities to denormalize the table first and try to solve it from there, but what I'd like to know is whether anybody is aware of a more generic way to achieve that? What I could accept is a hard coded limitation of the number of nested levels, as this seems to be very hard to achieve in SQL.
In the real scenario, I'm using only balanced trees, so from that point of view, the reports will be consistent.
Any ideas?
Thanks, Jürgen

select l, sum(salary) from (SELECT last_name, employee_id, manager_id, salary, LEVEL l
FROM employees
START WITH employee_id = 100
CONNECT BY PRIOR employee_id = manager_id) where l > :input_level
group by l;

Sales Analysis Report based on Supplier-wise

Hi Experts,
My client requirement is ,We are into trading so , we want a Sales analysis report based on Supplier-wise. like,
Selection critieria is
1)Supllier name
2)From and To date.
Heading are
Item name Sales UoM Jan(quantity) Feb(quanitity) mar(quantity) April(quanitiy).........
here, i need only the sum of the quantity for the items for that particular month based on the date giving in selection criteria.
Regards,
Dwarak
Edited by: Dwarak@SMS on Aug 23, 2010 4:29 PM

Hi experts,
For my clients requirement,
I could able to alter my previous query(find below).
My object is
1)To get sales report based on Manufacturer.
2)To get the TOTAL SALES QUANTITY OF THE MONTHS in the report. I go that in the below query, and only thing is that is have to minus the total Credit note for items to get the ACTUAL TOTAL SALES OF THE MONTHS. so , can anyone help me to alter the query to get me the ACTUAL TOTAL SALES OF THE MONTHS.
the query is
SELECT T0.ITEMCODE,T0.ItemName,T0.OnHand,
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JAN ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'FEB ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'MAR ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'APR ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'MAY ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 6 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JUN ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JUL ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'AUG ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'SEP ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'OCT ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'NOV ',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
(NOLOCK) WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'DEC '
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode = T0.ItemCode WHERE T0.SellItem = 'Y' and T0.[FirmCode] =[%0]
GROUP BY T0.ItemCode,T0.Itemname,T0.OnHand,YEAR(T1.DOCDATE) HAVING YEAR(T1.DOCDATE) =
YEAR(GETDATE())-0
ORDER BY T0. ITEMCODE

BO BI 4.0: WebI report based on BEx query (OLE DB enabled)

Hi Experts
We are trying to create WEBI reports based on BEx queries, but we are experiencing some issues. We have created two BEx queries og two separate multiproviders and opened them for external use but checking the OLE DB enable checkbox. In WebI we are now only able to use on of the queries as a data source (even though both are OLE DB enabled).
Are there any limitations to which multiproviders that can be used to create BEx queries for WebI reports?
We are using BO BI 4.0 and BW 7.0 SP 5.
Kind regards
Erik

Hi again Henry
We use BW 7.01 Support package 5 (we know it should have been at least 6), SAP GUI 7.20 patch 9, BEx 7.2 patch 6 and BO 4.0 patch 11.
The BW user that is synchronized to BO has almost all rights (almost sap_all). When we log on to BEx directly with the same user we use in BO, we are able to run both BEx queries without any problems. When we then log on to BO (with the same user), we are only able to use on of the queries in WebI.
As you say, we have to following setup:
-     BO users are synchronized from our BW system and when they log on to BO they use the SAP authentication.
-     The user that is synchronized from BW has been added to the Administrator group in BO
-     The OLAP connection is set to SSO so that the authorization in the BW system is used.
It is really strange that we are not able to use on of our multi providers in BW in WebI. As you say, we just need to try debugging with changing the authorization concept, changing the OLAP connection setup and so on to see if that helpsu2026
Kind regards
Erik

Stock report based on the batch

Hi Experts,
I am designing stock ageing report based on last goods reciept date which is the attribute of the batch.
the stock value in the buckets need to be calculated based on the stock quantity with moving average price.
the report is o/p is based on material group, material, batch.
when i drill dow based on the material it is coming fine when i drill down based on the batch it is not showing any values in the buckets.
considering the moving average price from masterdata enhancement of 0MAT_PLANT datasource.(but this datasource doen't have batch).
Please suggest your ideas.
Regards,
Satya

I am not too sure how to explain step by step..but my system uses this design..not created by me.
RESULT = SOURCE_FIELDS-SALK3 / SOURCE_FIELDS-LBKUM.
IF RESULT IS INITIAL.
RESULT = SOURCE_FIELDS-VERPR / SOURCE_FIELDS-PEINH.
matl valuations:
Try using tables MBEWH --(customised) and extract to DSO along with 0IC_C03.
Also use the datasource : 0CO_PC_ACT_05
SO Valuations:
EBEWH -customised
Try this link:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=235670765
Edited by: SAP BI Learner on Oct 28, 2011 4:27 AM

How to create a report based on radia selection

Hi,
I am new bie to Appex, I have a requiment to generate a report based on existing table with the select creditaria. I mean, the select creditaria wil be the radio button, if i click any option the report will change accordingly.
It is nothing but filter condition but i need to do with the radio button/items. Please give the detail steps
Thanks in advance.
Kumar.

Kumar,
First you will need to create the radio group on the page with the report and determine the list of values you would like to filter the report on (dynamic or static). ie:
select CUST_STATE as display_value, CUST_STATE as return_value
from DEMO_CUSTOMERS
order by 1Then you will need to update the report's where clause (demo application page 2 example):
select customer_id, cust_last_name || ', ' || cust_first_name customer_name, CUST_STREET_ADDRESS1 || decode(CUST_STREET_ADDRESS2, null, null, ', ' || CUST_STREET_ADDRESS2) customer_address, cust_city, cust_state, cust_postal_code
from demo_customers
where cust_state = :P2_RADIOWith an Interactive Report, make sure you list the radio group item (P2_RADIO) in the "Page Items to Submit" fields in the report region.
The you can create an on change dynamic action based on the radio group to refresh the Report region. I made a quick example on apex.oracle.com
http://apex.oracle.com/pls/apex/f?p=34760:2
Depending on the number of items in the radio group, you may want to think about using a select list also.
V/R
Ricker

Create a report based on sample data!

Hello all,
I would like to get some helps for creating a report based on the following table data in the database:
Class     |        Name                   |         Student
=======================================
1            |        Algebra               |             60
1            |        Extra Algebra      |             20
2            |        Calculus              |             80
2            |        Extra Calculus     |             10
3            |        Geometry            |             90
What I expect to have the layout of report should be look like as below:
                           School Register Report
ClassGroup     |         Name          |    Ontime register   |    Late register
=========================================================
1                      |        Algebra        |             60              |           20
2                      |       Calculus        |             80              |           10
3                      |       Geometry      |             90              |
Please tell it is possible to do it in Crystal Report? Please help with solution. Thanks in advance.

Assumimg second type always starts with Extra then, create formula
@Name
If like 'Extra*' then mid(, 7,20) else
Group on this formula
@LateReg
If like 'Extra*' then else 0
@OnTimeReg
If not( like 'Extra*') then else 0
Add Maximum smmaries of these formula to @Name Group footer, suppress details and group header
Ian

Can i get month, quarterly, half yearly, yearly wise sales report basing on

hi,
sap gurus,
good evening to all,
how can i get month, quarterly, half yearly, yearly wise sales report basing on division and material.
is there any std transaction code for that.
customization is requried for that.
regards,
balaji.t
09990019711

Standard SAP SD Reports:=
Statistic Group:
Purpose u2013 To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Regards,
Rajesh banka

Report sale by material Group

HI,
Can anyone tell me if there are any standard report that I can get sales order by material Groups???

Dear Ryan
There is no standard report available based on material group. But you can generate the same through query SQVI and table join MARA (for Material Group) and VBAK (for sales order number) or VBRP (for sales details).
Thanks
G. Lakshmipathi

NCS reports based on AP groups

Similar Messages

Maybe you are looking for