Need advise on Canon VIXIA HF-M32 (HD) VIDEO CAMERA. - to get the mist out of it.

How to delete videos from Camera's built in memory drive?

PK,
You can delete the scenes that you don't want to keep by following these steps:
Open the index screen that contains the scenes you want to delete.
Touch the check mark to open the scene selection screen.
Touch the individual scenes you want to delete.
Delete the scenes.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Canon vixia hf m31 hd video camera will I be able to upload my video to mac

picked up canon m31 movie camera and waitting for xmas to open it. Will I be able to use this model with imovie or another mac video program?

Wrong forum, this is for iOS iMovie (for the iphone, iPod, & iPad).
You'll be wanting to go to the OSX iMovie forum:
http://www.apple.com/support/imovie/

IMovie "does not see" videos from my Canon Vixia HF M32 and shuts down. Any ideas?

Lately, I have not been able to download videos as I used to from my Canon Vixia HF M32. My iMovie would not see the camera and would often close unexpectedly. It then gives an incomprehensible error message. I have no idea why this is happening or what to do. I was able to dowload some videos using a pc and a different software. Any clue?
Thanks

iMovie HD (version 5 and 6) works only with Firewire cameras, DV or HDV.
Footage from other types of cameras can be converted for use. Try VoltaicHD and convert to Apple Intermediate Codec (1080i or 720p) for HD footage or DV for SD (Standard Definition) footage.
If all you want to do is creating a DVD, go for SD footage in the DV format. A DVD is always SD.

Canon Vixia HF R20 - How do I turn off the date display?

How do I turn off the date display on my Canon Vixia HF R20? I do not want the date on my videos. I searched the manual and googled it and can't find an answer.

Hello DaisyKary,
When shooting with the VIXIA HF R20 you would be able to turn off most of the displays by pressing the [DISP. Batt. Info] button through a cycle. It will change what is displayed on the camcorder's LCD panel.
If this is an urgent technical support matter I would urge you to contact Canon technical support directly for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over

I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over. Please help thanks!

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

HT5219 Do you need a Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

Do you need or is there a specific Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

Hi XChip73,
The links below will answer your questions about specific cable needs for Thunderbolt 2 and how the speed is determined.
Apple - Thunderbolt: Next-generation high-speed I/O technology.
Apple Thunderbolt cables and adapters - Apple Support
Cheers,
-Jason

Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?

Stuck in restart mode -- Express Lane advised that I use the Install Disc to fix a problem. I inserted the disc, pressed C as advised and restarted, nothing comes up, the computer just goes on and off - any advise on starting the laptop and getting the disc out?

You insert the disk and restart while holding down the 'c' key until you see the apple and spinning cog. Is that precisely what you did?

Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
From:
Mac computers: About startup tones
3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

I got the message I needed more storage. I purchased it but I still keep getting the message whenever I try to download an application that I don't have enough memory . Am I missing something?

I got the message I needed more storage. I purchased it but I still keep getting the message whenever I try to download an application that I don't have enough memory . Am I missing something?

You cannot use iCloud Storage to suppliment your iPad. It doesn't work that way.

Need help with Canon Vixia HF S200 and FCP settings looks awful, help!

Shot footage on Canon Vixia HF S200 HD at PF24 looks great in camera. Used Wondershare video converter to go from .MTS file to MPEG4 file. Brought into FCP 6.0.6 now image has a lag time or slightly blocky/mosaic when people or camera moves; the sound is good. What should my sequence settings be? Did I miss a setting in Wondershare? I've never used this camera before and my boss needs me to impress our new school superintendent...help!
Andrew

Thanks Jerry, that helped alot. Read my latest post please:
...Pro Res 422 for a 4 minute project using FCP 6.0.6. It's a Mac Pro 2x3Ghz Quad with GB 800 Mhz. The project is almost done but it is freezing up during playback. Plays for 20 second then playhead freezes then jumps ahead. I've copied timeline sequence 2 times and created new sequences and that does not help. If anyone has suggestions I'm all ears, thanks.
Andrew

Canon vixia hf r500 streaming video?

Hello all,
I recently purchased a Canon Vixia hf r500. I bought it because I was told you could stream video with it. I run a weekly podcast where we stream the video live on upstream. I've been trying to figure out how to use this as a webcam but I've been left scratching my head. Is there anyone familiar with this camera and how to pull this function off?
When I plug in via USB the camera is recognized as a mass storage device but when I opened ustream the camera is not found.
Thanks for any help you can give.

You may need to use the HDMI cable and a video capture device. I'm not sure the USB port can be used for streaming video. You might be able to use the optional STV-250N Stero Video Cable and connect it to a video capture device but I don't think the quality will be near as good as using the HDMI cable. However using the optional cable and a compatible capture device would be less expensive than the HDMI option.
Analog capture devices (not an all inclusive list):
Elgato Systems USB Analog Video Capture Device
Diamond VC500 One Touch USB Video & Audio Capture for Windows
Hauppauge USB-Live2 Analog Video Digitizer
Tera Grand EasyCAP Composite / S-Video and Audio USB Capture Device
HD Video capture devices (not a comprehensive list):
Hauppauge Colossus Video Recorder
Blackmagic Design Intensity Shuttle
Blackmagic Design UltraStudio Mini Recorder Capture Device (uses Thunderbolt cable to connect to computer)
Blackmagic Intensity Extreme

I am trying to download pictures from my canon rebel eos to my Ipad but i get the message "this device is not supported" what can I do ?

I just bought an Apple Lighting to USB Camera Adapter. When I got home to and connected it to my Canon Rebel EOS Digital Camera. I received the error message "This device is not supported" I was wondering if there is any software or drivers I need to download?
Thanks
Don

I use Canon Cameras and have no problems downloading photos from the camera to the Lightning to USB Camera Adapter. My questions and suggestions might be basic but just to make sure:
1. This is an iPad forum area. Are you using the lightning to USB camera adapter with an iPad? Your info in your original post says iPod. I'm not sure that the adapter works with an iPod.
2. After you connect the adapter to your iPad and then use a USB cable to connect the adapter to the camera did you turn on the camera?
3. If you did turn on the camera and still did not get the import of photos to start try a reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. This will not cause any data loss.

I have a Canon Power Shot A520 and I can't get the battery cover open.

I followed the manual and am new to my camera, but I cannot get the battery cover to slide open on my Canon Power Shot A520. Any suggestions.
Solved!
Go to Solution.

Hi WG!
Thanks for posting.
There is a sliding lock switch on the battery door that needs to be slid to one side as you also push the battery door out. Please ensure you are doing both at the same time, otherwise the battery door remains locked.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My Imac needs a new hard drive. Can anyone help ensure I get the right one?

I have an Imac from around 2008-09. IMac8,1
It's running Mac Os X ver. 10.5.8 and has the stock hard drive in it.
2gb ram
Running a 2.8ghz Intel Core 2 Duo and I think has like 250 gb
I'd like to get something bigger and also upgrade the operating system. Don't need multiple TB's nor can I afford it but want to ensure i get the right thing for my needs.
It won't install adobe photoshop 6 because operating system is too old but don't want to spend money on new operating system with hard drive that keeps failing.
Error code: 4hdd/11/40000000 SATA (0,0) !
Got this error code about a year ago. downloaded a manual fan program that has helped but every third day or so it crashes and when i try reboot i get the dreaded question mark. usually if i let it rest for an hour or two it fires up but i don't want to risk anymore.
any help greatly appreciated.
cheers

I suspect a failed HD, in that case I'd recommend Apple Hardware Test in Extended Mode at least 3x. You will need the original install discs that shipped with the computer, if you do not have them any longer you will need to order a replacement set from Apple by calling AppleCare. You will need a credit card and the serial number of the machine. The cost should be nominal.

Do clips need to be rendered before exporting project to video camera?

I am in the process of exporting an Imovie project back to my video camera for storage on a tape. When I start the export process I get a message that says clips need to be rendered prior to exporting. When I click the button to render clips Imovie goes through the process of rendering the clips and after several minutes the Imovie project starts to export to the camera and runs for about 2 seconds and the Imovie quits.
Imovie also gives the option of not rendering the clips.
Do i need to render the clips before exporting them to my video camera?
iMac4,1 Mac OS X (10.4.9) Intel Core Duo, 1.83 GHz

Does the project reside on an external drive? If so, make sure the drive uses the Mac OS Extended disk format, which iMovie requires.
http://discussions.apple.com/message.jspa?messageID=4176921#4176921
The crashes are most likely occurring because of external factors, not because of a flawed rendering routine. These can include the wrong disk format, QuickTime add-ons and obsolete iMovie plug-ins.
http://discussions.apple.com/message.jspa?messageID=2920540#2920540
Do i need to render the clips before exporting them to my video camera?
It may depend on what type of clips they are. If they are photos imported with the Ken Burn checkbox turned OFF — which are not rendered as they are imported — iMovie will ask to render them. Do NOT allow iMovie to render the photos at this time for there's a bug that adds lots of jaggies to the images, reducing their quality.
Karl

Need advise on Canon VIXIA HF-M32 (HD) VIDEO CAMERA. - to get the mist out of it.

Similar Messages

Maybe you are looking for