Need Attribute Text instead of public name in Siebel

Hi Experts,
Is it possible in OPA to send across attribute text instead of public name / attributeName in the "SaveSession" inbound interface to Siebel application?
Thanks,
Vinay

Vinay,
Unforunately SaveSession only saves the attributes and their values. The text of an attribute cannot be saved.
If you really need the attribute text, you would probably have to use some custom code to do the following:
1. Create a text attribute (a2) that will hold the text of the attribute you want the text for (a1):
2. Create a event handler that sets the value of the text attribute (a2) to the text of the attribute (a1).
3. When save is called the text attribute (a2) will be saved to the session.
Its no a very elegant solution, but its the only way I can think of to do it.
Cheers
Frank

Similar Messages

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

boomer1630 wrote:
- i have a Samsung S3)
-I have tried using *228 to update.
You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through. The PRL updates are handled by the SIM card.
Try this and see if it helps: turn off the phone, remove the SIM card, and wait a few minutes. Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

Unable to see text instead of account name in the hierarchy

Dear all,
I m new to SAP BI,
I have a Fianancial Statement Item in which hierarchy and text is loaded. Now when the report is executed I want the to display the coresponding text, that is loaded with the hierarchy, with the account name. How do i do that.

Place your cursor on any of the account field, then right click --> select "properties". You will get to see three tabs under teh properties for characteristics GL account. The first tab is General, where you can see the Display option dropdown list.
From here select Key and Text, then click OK , you can find the text for the field you are looking for.

Need site url instead of computer name in link sent by email using sharepoint designer workflow

Hello,
We are sending email to view item of a document library using below syntax : [%Current Item:Created By%] on
[%Current
Item:Modified%].
When trying to click from inbox , it is displaying link :
http://servername/sites/site1/doclib/abc.xml where as site name has been given as
http://test.com
So we need to display as http://test.com/sites/doclib/abc.xml.
So if we migrate this site to another server with same name, so wont make any issue about workflow.
Please guide.
Thanking in advance.
Regards,
Jayashri

the built-in emails from SharePoint (alerts, etc) build the URL using the Default Zone in the webapp's AAMs... sounds like you just need to update the AAMs to the DNS names that you *want* to use.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Descriptions/text instead technical names

Hi everybody,
i created a query with the query designer. i want to display the output data with the discription/full text instead of technical name. i have made the relevant adjustment in query designer but when i open the query with VC it only displays the technical names.

Christine,
You have to adjusts to make in Query Designer (you did) and in Visual Composer. Usually by bringing your query to storyboard you have option of choose your field (@field, @field_ext_key, @field_key). To see text you shoul choose the first one.
Make sure that in the Display Tab of your object in Query Designer you selected 'Text'.
Regards,
Gilson

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

Generate public names for ALL attributes?

Hi all,
What suggestions do you have to generate public names for ALL attributes in OPM 10.4?
We're trying to pretty up the decision report by setting invisible ALL attributes, except for: the top goal, structural reference number, and base data.
Seems like the only way to get it done is to go in the build model and manually create public name one-by-one.
Thanks,
Isamu

Hi Isamu,
It sounds like you could use the silent property to customise your decision report.
If Attribute A is proven by B, C and D, you can set A to silent and it will hide B, C and D from a decision report...there is no need to individually set B, C and D to invisible.
Check out the help file here http://docs.oracle.com/html/E27987_01/Content/Decision%20reports/Hide_information_in_decision_report.htm
What's really helped me in the past is creating a Visual Browser file (or multiple files if your rulebase is large) of the rules, and identifying the attributes you want in the decision report by colour coding the visualization. After you have the visual picture, it becomes much easier to see which attributes you should set to silent & invisible to achieve the correct report.
Let me know if this helps!
Cheers,
Ben

I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this

I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>

You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

Contact phone numbers show instead of contact names on my iPad in text messages etc. How do I change it so their names show

contact phone numbers show instead of contact names on my iPad , text messages etc. How do I change it so their names show

Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

Contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

When I send a text, it says -from: name lastname- instead of my number

When I send a text, it says -from: name lastname- instead of my phone number, how do I remove this?
I have deleted any old mail accounts and changed Appleid.

When you send an SMS, or when you send an iMessage?
An SMS/MMS can be sent from your cell phone number only and cannot be changed.
If the recipient has your contact info available on their cell phone, your name will appear as the sender of an SMS/MMS especially if the recipient has an iPhone.

HT3529 when i send a text/imessge why does the person recieving it see my email address instead of my name?

when i send a text/imessage why does the person receiving it see my email address instead of my name??

iMessage requires both parties be using iOS 5. The iPhone 3 can not be upgraded to iOS 5, thus messages would be sent as an SMS (Text message)
Stedman

How do I sort music in the iTunes library by Genre followed by Year instead of Artist Name?

I am currently using the iTunes Library to organize my music. I find that the library by default arranges music into folders by Artist Name. Is there any way to first make it arrange the music by Genre and then by Year instead of Artist Name within the folders? Since I have music in different languages and use this music in other music software as well, sorting by Genre will be extremely helpful. I hope someone can help me out.
Thanks in Advance!

Sorry, I missed part 2. Unless CS4.2 has added a true "Group" function, like in InDesign, Illustrator, etc., there is not a direct way to keep Selected Clips together. However, you can put them on their own Sequence and then Nest that Sequence with others. This is often done, so that one can apply Effects "globally" to that Nested Sequence. [Note: there is no real Group function in Titler either, but for many operations, one can Select multiple Text Blocks, Shapes, Lines, etc., but there is no way to permanently "hold" that group.]
The Alt-click in the Project Panel, for instance, will allow one to drag all to the Timeline, and the Shift-click (or lasso w/ Cursor) in the Timeline will allow one to apply certain things to that group, but the moment that any other Clip is Selected, that "group," does not exist.
I can see a use for a real Group function, but for things like the application of Effects, one would still need to do the Nesting. Test this out by Selecting just two Clips, and go to apply an Effect - you cannot do that. OTOH, one can apply an Effect to one Clip, Rt-click it and choose Copy, then Select multiple Clips and Rt-click on those, where you would Paste Attributes. Not exactly what I think you are asking about, but the results, with just a few clicks, should be the same.
If I missed your intent and need, let me know where I went wrong.
Good luck,
Hunt

Attribute Texts in Decision Report

Hi OPA Experts,
We have multiple test forms in our project which have same/similar field. Eg. the field "Common" is spread across multiple test forms. So, during our build we had to make each attribute text unique by prefixing them with the test form name, since system does not allow duplicate attribute text. Now, when we look at the Decision Report, we see <Test Form Name>_Common instead of the screen display text.
Is there a way to overcome this issue, or is there any work-around?
If multiple attributes exist across different properties, with the same text, Build itself fails. And we cannot even Build & Debug nor Build & Run.
Regards,
Suan.

Yes - you can add the attribute to your properties file and then click the Override button to override the text that appears in your decision report. That said, this is not recommended! It will make your decision report very difficult to use for debugging - your attributes have different texts because they have different proofs (otherwise you wouldn't need different attributes) so if you remove the unique part of the attribute text you will find it difficult to know which attribute you are seeing in your decision report.
Think about why you have a decision report - do you use it to understand the operation of the rules or do you show it to your end users? If you are using it to understand your rules I certainly wouldn't be overriding the attribute text (for the reasons above). If you are showing it to an end user, perhaps you could represent the information in another, more succinct way (eg using summary screen labels which show/hide as appropriate or put the information in a generated document). Don't forget you can always just hide attributes in the decision report by setting them to Invisible (hides the attribute itself) or Silent (hides the proof) - to do this, add your attribute to your properties file and select the 'Decision Reports' tab. If you make an attribute Silent or Invisible you can still see it in the debugger, but it won't show to your end users (best of both worlds!).
Hope that helps,
Fiona

Importing text file (with file names) into Automator.. is it possible?

Hello all,
I have been working with Windows Batch files for my line of work. I have a couple of file names in a text file (a column), which I want to copy from one folder of one hdd to another folder on a different hdd. I have been trying to do this kind of work with a Mac. I already know how you copy and rename files in automator (which isn't difficult, of course) but you have to 'select' the files in the finder first (with get specified items).
But the only way i see that you can specify items is by selecting them... is there a way to import a text file with all the file names instead of selecting all the file names manually?
or is there an AppleScript alternative which I can use to import the text file (or just copy into applescript) and run before the query's of copying and renaming the files? I am kind of new to Apple programming.
The text file looks like this:
image1.jpg
image2.jpg
etc..
so there has to be a command to: 'goto' a specific folder as well.
Thanks in advance!

You can import text files, but if they are just names you will need an additional action to add the source folder path. A *Run AppleScript* action can be used, for example:
Tested workflow:
1) *Ask for Finder Items* {Type: files } -- choose the text file containing the names
2) *Combine Text Files* -- this gets the text file contents
3) *Filter Paragraphs* { return paragraphs that are not empty } -- skip blank lines
4) *Run AppleScript* -- copy and paste the following script:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 680; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters} -- add folder path
add the specified folder path to a list of file names
input: a list of text items (the file names)
output: a list of file paths (aliases)
set output to {}
set SkippedItems to {} -- this will be a list of skipped items (errors)
set SourceFolder to (choose folder with prompt "Choose the folder containing the file names") as text -- this is the folder containing the names
repeat with AnItem in the input -- step through each name in the input
try
set AnItem to SourceFolder & AnItem -- add the prefix
set the end of the output to (AnItem as alias) -- test
on error number ErrorNumber -- oops
set ErrorNumber to (" (" & ErrorNumber as text) & ")" -- add the specific error number
set the end of SkippedItems to (AnItem as text) & ErrorNumber
end try
end repeat
ShowSkippedAlert for SkippedItems
return the output -- pass the result(s) to the next action
end run
to ShowSkippedAlert for SkippedItems
show an alert dialog for any items skipped, with the option to cancel the workflow
parameters - SkippedItems [list]: the items skipped
returns nothing
if SkippedItems is not {} then
set {AlertText, TheCount} to {"Error with AppleScript action", count SkippedItems}
if TheCount is greater than 1 then
set theMessage to (TheCount as text) & space & " items were skipped:"
else
set theMessage to "1 " & " item was skipped:"
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SkippedItems, AppleScript's text item delimiters} to {SkippedItems as text, TempTID}
if button returned of (display alert AlertText message (theMessage & return & SkippedItems) ¬
alternate button "Cancel" default button "OK") is "Cancel" then error number -128
end if
return
end ShowSkippedAlert
</pre>
5) *Copy Finder Items* { To: _your external drive_ }

Need Attribute Text instead of public name in Siebel

Similar Messages

Maybe you are looking for