Need Audio drivers (Analog Devices AD1984 @ Intel 82801HBM ICH8M HD Audio controller

Hi
I just delete Vista and install Windows Xp pro, and i try all the drivers in this website , but i can't find it.
In the same time i'm looking for video drivers Intel GMA X3100
Some info about my system
Thanks a lot
Solved!
Go to Solution.

Here is the driver for Intel X3100 graphics.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Similar Messages

A quick primer on audio drivers, devices, and latency

This information has come from Durin, Adobe staffer:
Hi everyone,
A common question that comes up in these forums over and over has to do with recording latency, audio drivers, and device formats. I'm going to provide a brief overview of the different types of devices, how they interface with the computer and Audition, and steps to maximize performance and minimize the latency inherent in computer audio.
First, a few definitions:
Monitoring: listening to existing audio while simultaneously recording new audio.
Sample: The value of each individual bit of audio digitized by the audio device. Typically, the audio device measures the incoming signal 44,100 or 48,000 times every second.
Buffer Size: The "bucket" where samples are placed before being passed to the destination. An audio application will collect a buffers-worth of samples before feeding it to the audio device for playback. An audio device will collect a buffers-worth of samples before feeding it to the audio device when recording. Buffers are typically measured in Samples (command values being 64, 128, 512, 1024, 2048...) or milliseconds which is simply a calculation based on the device sample rate and buffer size.
Latency: The time span that occurs between providing an input signal into an audio device (through a microphone, keyboard, guitar input, etc) and when each buffers-worth of that signal is provided to the audio application. It also refers to the other direction, where the output audio signal is sent from the audio application to the audio device for playback. When recording while monitoring, the overall perceived latency can often be double the device buffer size.
ASIO, MME, CoreAudio: These are audio driver models, which simply specify the manner in which an audio application and audio device communicate. Apple Mac systems use CoreAudio almost exclusively which provides for low buffer sizes and the ability to mix and match different devices (called an Aggregate Device.) MME and ASIO are mostly Windows-exclusive driver models, and provide different methods of communicating between application and device. MME drivers allow the operating system itself to act as a go-between and are generally slower as they rely upon higher buffer sizes and have to pass through multiple processes on the computer before being sent to the audio device. ASIO drivers provide an audio application direct communication with the hardware, bypassing the operating system. This allows for much lower latency while being limited in an applications ability to access multiple devices simultaneously, or share a device channel with another application.
Dropouts: Missing audio data as a result of being unable to process an audio stream fast enough to keep up with the buffer size. Generally, dropouts occur when an audio application cannot process effects and mix tracks together quickly enough to fill the device buffer, or when the audio device is trying to send audio data to the application more quickly than it can handle it. (Remember when Lucy and Ethel were working at the chocolate factory and the machine sped up to the point where they were dropping chocolates all over the place? Pretend the chocolates were samples, Lucy and Ethel were the audio application, and the chocolate machine is the audio device/driver, and you'll have a pretty good visualization of how this works.)
Typically, latency is not a problem if you're simply playing back existing audio (you might experience a very slight delay between pressing PLAY and when audio is heard through your speakers) or recording to disk without monitoring existing audio tracks since precise timing is not crucial in these conditions. However, when trying to play along with a drum track, or sing a harmony to an existing track, or overdub narration to a video, latency becomes a factor since our ears are far more sensitive to timing issues than our other senses.   If a bass guitar track is not precisely aligned with the drums, it quickly sounds sloppy. Therefore, we need to attempt to reduce latency as much as possible for these situations. If we simply set our Buffer Size parameter as low as it will go, we're likely to experience dropouts - especially if we have some tracks configured with audio effects which require additional processing and contribute their own latency to the chain. Dropouts are annoying but not destructive during playback, but if dropouts occur on the recording stream, it means you're losing data and your recording will never sound right - the data is simply lost.   Obviously, this is not good.
Latency under 40ms is generally considered within the range of reasonable for recording. Some folks can hear even this and it affects their ability to play, but most people find this unnoticeable or tolerable. We can calculate our approximate desired buffer size with this formula:
(Sample per second / 1000) * Desired Latency
So, if we are recording at 44,100 Hz and we are aiming for 20ms latency:   44100 / 1000 * 20 = 882 samples. Most audio devices do not allow arbitrary buffer sizes but offer an array of choices, so we would select the closest option. The device I'm using right now offers 512 and 1024 samples as the closest available buffer sizes, so I would select 512 first and see how this performs. If my session has a lot of tracks and/or several effects, I might need to bump this up to 1024 if I experience dropouts.
Now that we hopefully have a pretty firm understanding of what constitutes latency and under what circumstances it is undesirable, let's take a look at how we can reduce it for our needs. You may find that you continue to experience dropouts at a buffer size of 1024 but that raising it to larger options introduces too much latency for your needs. So we need to determine what we can do to reduce our overhead in order to have quality playback and recording at this buffer size.
Effects: A common cause of playback latency is the use of effects. As your audio stream passes through an effect, it takes time for the computer to perform the calculations to modify that signal. Each effect in a chain introduces its own amount of latency before the chunk of audio even reaches the point where the audio application passes it to the audio device and starts to fill up the buffer. Audition and other DAWs attempt to address this through "latency compensation" routines which introduce a bit more latency when you first press play as they process several seconds of audio ahead of time before beginning to stream those chunks to the audio driver. In some cases, however, the effects may be so intensive that the CPU simply isn't processing the math fast enough.   With Audition, you can "freeze" or pre-render these tracks by clicking the small lightning bolt button visible in the Effects Rack with that track selected. This performs a background render of that track, which automatically updates if you make any changes to the track or effect parameters, so that instead of calculating all those changes on-the-fly, it simply needs to stream back a plain old audio file which requires much fewer system resources. You may also choose to disable certain effects, or temporarily replace them with alternatives which may not sound exactly like what you want for your final mix, but which adequately simulate the desired effect for the purpose of recording.   (You might replace the CPU-intensive Full Reverb effect with the lightweight Studio Reverb effect, for example. Full Reverb effect is mathematically far more accurate and realistic, but Studio Reverb can provide that quick "body" you might want when monitoring vocals, for example.) You can also just disable the effects for a track or clip while recording, and turn them on later.
Device and Driver Options: Different devices may have wildly different performance at the same buffer size and with the same session. Audio devices designed primarily for gaming are less likely to perform well at low buffer sizes as those designed for music production, for example. Even if the hardware performs the same, the driver mode may be a source of latency. ASIO is almost always faster than MME, though many device manufacturers do not supply an ASIO driver. The use of third-party, device-agnostic drivers, such as ASIO4ALL (www.asio4all.com) allow you to wrap an MME-only device inside a faux-ASIO shell. The audio application believes it's speaking to an ASIO driver, and ASIO4ALL has been streamlined to work more quickly with the MME device, or even to allow you to use different inputs and outputs on separate devices which ASIO would otherwise prevent.
We also now see more USB microphone devices which are input-only audio devices that generally use a generic Windows driver and, with a few exceptions, rarely offer native ASIO support. USB microphones generally require a higher buffer size as they are primarily designed for recording in cases where monitoring is unimportant. When attempting to record via a USB microphone and monitor via a separate audio device, you're more likely to run into issues where the two devices are not synchronized or drift apart after some time. (The ugly secret of many device manufacturers is that they rarely operate at EXACTLY the sample rate specified. The difference between 44,100 and 44,118 Hz is negligible when listening to audio, but when trying to precisely synchronize to a track recorded AT 44,100, the difference adds up over time and what sounded in sync for the first minute will be wildly off-beat several minutes later.) You are almost always going to have better sync and performance with a standard microphone connected to the same device you're using for playback, and for serious recording, this is the best practice. If USB microphones are your only option, then I would recommend making certain you purchase a high-quality one and have an equally high-quality playback device. Attempt to match the buffer sizes and sample rates as closely as possible, and consider using a higher buffer size and correcting the latency post-recording. (One method of doing this is to have a click or clap at the beginning of your session and make sure this is recorded by your USB microphone. After you finish your recording, you can visually line up the click in the recorded track with the click in the original track by moving your clip backwards in the timeline. This is not the most efficient method, but this alignment is the reason you see the clapboards in behind-the-scenes filmmaking footage.)
Other Hardware: Other hardware in your computer plays a role in the ability to feed or store audio data quickly. CPUs are so fast, and with multiple cores, capable of spreading the load so often the bottleneck for good performance - especially at high sample rates - tends to be your hard drive or storage media. It is highly recommended that you configure your temporary files location, and session/recording location, to a physical drive that is NOT the same as you have your operating system installed. Audition and other DAWs have absolutely no control over what Windows or OS X may decide to do at any given time and if your antivirus software or system file indexer decides it's time to start churning away at your hard drive at the same time that you're recording your magnum opus, you raise the likelihood of losing some of that performance. (In fact, it's a good idea to disable all non-essential applications and internet connections while recording to reduce the likelihood of external interference.) If you're going to be recording multiple tracks at once, it's a good idea to purchase the fastest hard drive your budget allows. Most cheap drives spin around 5400 rpm, which is fine for general use cases but does not allow for the fast read, write, and seek operations the drive needs to do when recording and playing back from multiple files simultaneously. 7200 RPM drives perform much better, and even faster options are available. While fragmentation is less of a problem on OS X systems, you'll want to frequently defragment your drive on Windows frequently - this process realigns all the blocks of your files so they're grouped together. As you write and delete files, pieces of each tend to get placed in the first location that has room. This ends up creating lots of gaps or splitting files up all over the disk. The act of reading or writing to these spread out areas cause the operation to take significantly longer than it needs to and can contribute to glitches in playback or loss of data when recording.

There is one point in the above that needed a little clarification, relating to USB mics:
_durin_ wrote:
If USB microphones are your only option, then I would recommend making certain you purchase a high-quality one and have an equally high-quality playback device.
If you are going to spend that much, then you'd be better off putting a little more money into an external device with a proper mic pre, and a little less money by not bothering with a USB mic at all, and just getting a 'normal' condensor mic. It's true to say that over the years, the USB mic class of recording device has caused more trouble than any other, regardless.
You should also be aware that if you find a USB mic offering ASIO support, then unless it's got a headphone socket on it as well then you aren't going to be able to monitor what you record if you use it in its native ASIO mode. This is because your computer can only cope with one ASIO device in the system - that's all the spec allows. What you can do with most ASIO hardware though is share multiple streams (if the device has multiple inputs and outputs) between different software.
Seriously, USB mics are more trouble than they're worth.

Audio Digital Analog Converter bit resolution

Hello ! i´m looking if I can use IPHONE to make my investigation project. Someone of you know which is the audio Digital Analog Converter bit resolution for a normal audio conversation? 13bits? thank you very much

MonoPrice.com has a digital to analog converter for around $25 although it looks like it is on back order. I would give them a call anyways. Don't get fooled by their prices, they are fast and cheap but good and the place to buy all your audio and video cables. I wired up my sisters entire home theater for less than a quarter of what I payed for my first HDMI cable which I didn't pay much for either.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=6884&seq=1&format=2

Driver issue with Intel ICH9M LPOC Inte. Controller post windows 7 upgrade

Upgraded from vistahome premium to 7 proffesional and have hardware issue with this device
on Intel(R) ICH9M LPC Interface Controller - 2919
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
Went to intels website and could not find driver for 7 (there were drivers for vista & xp)
Any idea where to get driver for this

Hi,
It really helps us help you when you identify your notebook with its complete product name or product number and include it in a post in you thread..
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name (p/n). Post one or both of them (with all alphanumeric characters here).
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

The Audio playback device HDA Intel (ALC268 Analog) doesn't work.

Every time I login to KDE through KDM, the notification gives me this message: "The Audio playback device HDA Intel (ALC268 Analog) doesn't work. Falling back to default"
Everytime I try to play an audio file, the notification gives me the same message.
But everything else such as system sound, online video work.
What can I do to make it work?
thank you for your help

I have the same problem under the same conditions the original poster described. However, under System Settings -> Multimedia -> Device Preference I don't have default as device listed. The devices I can pick are:
-Esound (ESD)
-HDA Intel (STAC92xx Analog)
-HDA Intel, NVIDIA HDMI (HDMI Audio Output)
-Jack Audio COnnection Kit.
I can also pick HDA Intel (NVIDIA HDMI) when I check 'Show advanced devices'
When I use Esound I have sound for a while, until after a random time it falls back to the underlying device, which makes sound disappear. When I use HDA Intel (STAC92xx Analog), it falls back immediately on logging in and the other choices do never fall back, but when I use them, I have no sound at all. After I loose sound when Esound falls back to another device, sometimes writing sudo /etc/rc.d/alsa restart gives sound back, but mostly I need to relog/restart the X-Server to get sound back.
Is my issue related to the original poster his problem? And how can I fix it?

Need audio drivers for hp media center pc m7780n that works on windows 7 ultimate 64 bit

need drivers that works on windows 7 ultimate 64 bit.

Hi:
You can download the latest audio drivers from the Realtek site below. Accept the agreement. Download and install the first one on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Drivers for Analog Devices RTI-815

Hi,
Does anyone know where I can find Labview drivers for an Analog
Devices RTI-815 card, if they exist?
The card came out of a Haake Rheocord System 90. The old
controller for it is a 286; we'd like to replace it with a newer computer
and software written in Labview. Thanks for your help.
-Nathan

Hi, thanks for the responses. I did a search on the 815 and 802, but I must admit, I neglected to search the forums for the AC28. All 3 cards are still available (although AD has discontinued their cards UEI manufactures replacement units) The company I work for has these cards in several test rigs, and I'm looking at options of modernising the PC & control software without incurring the cost of a complete control system retrofit (the current control software is DOS based). In view of performance & accuracy it probably makes sense to upgrade the cards and signal conditioning, but In the short term that would be a difficult proposition.
We also have other test machines which use labview, AD 5B signal conditioning, and Siemens profi connected I/O. Ideally if we were to look at a complete retro I would be keen to commonise as much equipment as possible. However, while the current hardware remains available, and performs adequately It will be quite difficult to justify.
SSK: Also, I would be interested in the code that was you utilised, if you could dig it up that would be a great starting point.
Mark: Thanks also for your post. I'll look into the driver kit, and most likely ask NI if they would consider writing some drivers at some stage.
Some links:
AC28:       http://www.opto22.com/site/pr_details.aspx?item=AC28&qs=100110021006,,,0,6
RTI-815:   http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815-32/
                 http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815/
RTI-802: http://www.ueidaq.com/products/pci-data-acquisition/uei-isa-ao/uei-802-8/

Has anyone developed drivers for ADMC401 from Analog devices?

I am trying to develop an interface to an ADMC401 which uses ADSP2171 processor. I am wondering if any one has developed any drivers for this.

Hello,
I did a quick web search and was unable to find any 3rd-party LabVIEW drivers for this device. Your best bet is to check with Analog Devices and see if they have any LabVIEW drivers for this hardware.
I wish you luck in your search. Have a pleasant day.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Need Win7 64Bit Beats Audio Drivers for Envy Touchsmart after Win8 Downgrade

Hi All,
I must have read 100 threads and downloaded about that many IDT Audio Drivers in an attempt to install the beats control panel for Win7.
My Serial # is[Personal Information Removed]. Product # is E6G27PA#ABG
I've managed to get all the Win7 drivers for all other products, and whilst the sound is working its usuing the defauly Audio driver and thus not making use of the subwoofer or other fancy beats devices.
Can anybody recommended the correct driver for this model under Win7? Everyone I've tried has just led me either back to the default windows one or won't install properly.
Cheers,
AB

Hi:
I believe this one will work...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107964-1&cc=us&dlc=en&lc=en...

Garage band wont work, need to install midi or audio drivers?

tried backing up my comp to install OSX leopard but failed. now garage band wont work! I keep getting this message...also want to know if its possible to upgrade to osx leopard with a 4th gen macbook that runs osx 10.4.11
*garageband has detected a possible conflict between one or more third party midi or audio drivers.*
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer. For instructions on removing older drivers, consult the manufacturers' documentation.

Im having the same problem, I upgraded my IMAC and was using tiger and I upgraded it to MAC 10.5.7, now GarageBand wont work saying my midi and audio drivers arent correct. My Reason 4.0 wont start either saying the same thing failed to open the midi library. My Protools works fine but I dont know how to update the audio and midi drivers that it matches the software I uploaded. I also went to the audio midi set up and it read, Audio MIDI Setup was unable to launch the MIDI Server. This means that you will be unable to view or edit your MIDI configurations.
Improperly written MIDI drivers can prevent the MIDI Server from launching successfully. If you have recently installed a new MIDI driver, try uninstalling it and then relaunching Audio MIDI Setup. If Audio MIDI Setup works correctly after that, then please contact the driver's manufacturer for further support.

Windows audio drivers for iMac Intel

Hi
I accidently deleted the Windows audio drivers on my machine. The audio works fine in Mac mode but errors out looking for the drivers in PC mode.
My brain errors out looking for the page with the proper drivers.
Any leads greatly appreciated..

Thanks for responding.
Yes, I have Boot Camp back-up CD (2 copies actually - 'Macintosh Drivers for Windows XP')
Error message I get when I run the set-up file from either copy: "Unable to locate file Macintosh Drivers for Windows.xp.msi."
Is there anywhere on line to download the drivers?
Thanks again

Need WXP drivers for Satellite A100 (PSAA9)

Hiya,
I've had to re-install Windows XP on my laptop. I don't have the Toshiba drivers CD though.
So I came here to get the drivers but I've no idea which driver goes with which hardware in my Device Manager.
Here's what I need the drivers for under Device Manager...
Ethernet Controller
Mass Storage Controller
Network Controller
PCI Device
PCI Device (again)
SM Bus Controller
Can anyone advise which specific driver I need for each?
Many thanks,
James

Thanks for you replies. I'd already come across that file, but it didn't give many clues. Here's the contents of it...
Component List Satellite A100; Satellite Pro A100; Equium A100
Contents and Installation order
for Windows XPH
Windows XP Home - Windows XP HE/Pro(English) Service Pack2(RTM)
- VALUEADD folder Service Pack2(RTM)
- SUPPORT folder Service Pack2(RTM)
1 Microsoft Internet Explorer V6.0(SP2)
2 DirectX V9.0c(SP2)
3 Windows Media Player 10 V10.00.00.3646
4 Windows Movie Maker V2.1.4026.0
5 Step by Step Interactive Training(HE/Pro) 3.5.25/3.5.23
6 SLP Module OEMSLP2.0 (523759)
7 Microsoft .NET Framework V1.1.4322(SR1)
8 Microsoft Office(R) OneNote(TM) 2003 V11.6360.6360 SP1
9 Hotfix for OLE and COM could allow remote code execution KB873333
10 Hotfix for Issue in HyperTerminal Could Allow Code Execution KB873339
11 Hotfix for Cannot add Windows components in Windows XP KB884018
12 Hotfix for Server Message Block Vulnerability KB885250
13 Hotfix for Issue in Windows Kernel and LSASS KB885835
14 Hotfix for Issue in WordPad Could Allow Code Execution KB885836
15 Hotfix for Cannot use infrared port to transfer data KB885855
16 Hotfix for Windows Firewall My Network (subnet) only KB886185
17 Hotfix for ASP.NET Path Validation Vulnerability KB886903
18 Hotfix for Security Update for Windows Messenger KB887472
19 Hotfix for Vulnerability in Hyperlink Object Library KB888113
20 Hotfix for Windows Could Allow Information Disclosure KB888302
21 Hotfix for Hardware (DEP)-enabled computer KB889673
22 Hotfix for Vulnerability in Microsoft agent KB890046
24 Hotfix for Issue in HTML Help Could Allow Code Execution KB890175
25 Hotfix for Vulnerabilities in Windows kernel KB890859
26 Hotfix for The DHTML Editing Component ActiveX Control KB891781
27 Hotfix for adding the Hibernate button KB893056
28 Hotfix for Issues in TCP/IP Could Allow Remote Code Execution KB893066(V2)
30 Hotfix for Wi-Fi Protected Access 2 (WPA2) KB893357
31 Hotfix for Vulnerability in Telephony service KB893756
32 Hotfix for The Microsoft Windows Installer 3.1 KB893803(V2)
33 Hotfix for DBCS file names are not displayed KB894391
34 Hotfix for File Signature Verification tool reports KB894871
35 Hotfix for Availability of Windows XP COM KB895200
36 Hotfix for A Windows XP SP2 computer with multiple processors KB896256(V3)
37 Hotfix for Issue in HTML Help Could Allow Remote Code Execution KB896358
38 Hotfix for Issue in Server Message Block KB896422
39 Hotfix for Vulnerability in Print Spooler service KB896423
40 Hotfix for Vulnerabilities in Graphics Rendering Engine KB896424
41 Hotfix for Vulnerability in Telnet client KB896428
42 Hotfix for Cumulative security update for Internet Explorer KB896688
44 Hotfix for Vulnerability in step-by-step interactive training KB898458
45 Hotfix for Vulnerabilities in Kerberos KB899587
47 Hotfix for Vulnerability in the Client Service for NetWare KB899589
48 Hotfix for Vulnerability in Remote Desktop Protocol KB899591
49 Hotfix for Vulnerabilities in the Windows shell KB900725
50 Hotfix for Vulnerability in the Microsoft Collaboration Data Objects KB901017(KB907245)
51 Hotfix for Vulnerability in Microsoft Color Management Module KB901214
52 Hotfix for Vulnerability in DirectShow KB904706
53 Hotfix for Vulnerability in Network Connection Manager KB905414
54 Hotfix for Vulnerability in Plug and Play KB905749
55 Sun Java 2 Runtime Environment V1.5.0_04
56 Intel(R) Chipset Software Installation Utility V7.2.1.1006
57 Intel 945GM/940GML Display Driver V14.18.2.4436
58 ATI ATI M52P/M54P/M56P Display Driver V8.204-051220a1-029876C
59 Nvidia G72M/G72MV/G73M Display Driver V83.02
60 TI PCI7411(6-in-1) Driver V2.0.0.4
61 Synaptics Luxpad & TouchPad Driver V8.2.9_2
62 Realtek Audio Driver with UAA Bus driver V5.10.0.5200
63 TOSHIBA Software Modem SM2162ALD04
64 Intel 10/100(Ekron)/GbE(Vidaria/Tekoa) Wired LAN Driver V8.0.21.101/V9.2.24
65 Intel 802.11a/g Golan Driver V10.1.0.13a
66 Atheros WirelessLAN 802.11a/g.g Driver V4.1.2.111.i129
67 Intel PRoset Utility for Golan V10.1.0.2w61
68 Atheros Client Utility for WirelessLAN 802.11a/g.g V4.1.1.231.i153
69 Bluetooth Stack for Windows by Toshiba V4.00.23(T)
70 Bluetooth Monitor V2.12
71 UPEK Finger Print Utility V5.4.0 Build 2688
72 TOSHIBA Common Modules V1.00.18ST
73 TOSHIBA Hotkey Utility V1.00.01ST
74 TOSHIBA Touchpad ON/OFF Utility V1.00.01ST
75 TOSHIBA Utilities V1.00.07ST
76 TOSHIBA Power Saver V7.03.07.I
77 TPS init V1.0.4.0
78 TOSHIBA SD Memory Card Format V2.1.0.0
79 SD Secure Module V1.0.3
80 TOSHIBA Assist V1.03.00
81 TOSHIBA ConfigFree V5.90.05
82 ConfigFree Demo Screen Saver V1.00.07
83 TOSHIBA Virtual Sound V1.02.01
84 TOSHIBA Speech System V1.00.2511
85 TOSHIBA Zooming Utility V2.0.0.23c
86 TOSHIBA Controls V3.22.2700
87 TOSHIBA PC Diagnostic Tool V3.1.5
88 Recovery Disc Creator for ExpressPlayer-Presto V1.1.0.5
89 CD/DVD Acoustic Silencer V1.00.008
90 DVD-RAM Driver V5.0.2.5
91 InterVideo WinDVD V5.0B11.533-A1222 for ATI
92 WinDVD Creator2 Platinum V2.0B014.376C33-NEN01
93 Record Now! Basic for TOSHIBA V7.31 Build 731B20E
94 DLA for TOSHIBA V5.20 Build 520B11C
95 Adobe Reader V7.0.5
96 TOSHIBA Skins for Windows Media Player V1.00.1121
98 Norton AntiVirus 2006 V12.0.3
99 TOSHIBA Offer(OEM Link) 10/26/2004
100 TOSHIBA User's Manual V1.0
101 TBIOS Driver V2.5USB1
102 TOSHIBA SMBIOS ActiveX Control V1.3
103 Microsoft and Toshiba Product Registration TCL_BC_WinXP_enu_09162004
104 AOL V9.0 Update
105 TOSHIBA Solutions V1.0
106 Talk-2-Toshiba V1.0
107 EULA file of Presto V1.0
108 ISO file of Presto V1.0.020-202821
109 Text file of Presto V1.0.020-202821
110 NiHelper V2.0.0.0
- ProtonPack Master Create Tool V3.01.00
- ProtonPack Recovery Tool V3.01.00
...that 114 different items! And I can see a lot of those items are not mandatory and/or are not drivers. More to point though, it does not solve my problem of needing to know the names of the drivers I should download (as presented on the downloads page) in order to fix my Driver Manager problems?
Cheers,
James

Re-installing XP - Need more drivers????

Toshiba Satallite P100-ST9012, with XP Pro. Hard drive went. I'm re-installing from an OEM cd. Installed XP Pro and SP's including SP3.
Downloaded and installed the drivers from the Toshiba website. Short list. Nothing for mobo.
After installing all that there were:
- the Intel Pro 10/100 driver is apparently the wrong driver for this laptop. Get message that it isn't the driver for the hardware installed. WFT? The driver is right off the website.
- even after installing the conextant audio driver, there is no installed audio driver in Device Manager.
And after installing all the drivers there were to install, Device Manager still shows these devices with no driver installed:
- Ethernet (for obvious reasons)
- Mass Storage Device
- SM Bus Controller
- USB Controller (that's right, no USB at this point)
- Unknown (2 of those)
Anyone install XP from scratch and install the drivers from the Toshiba website? Seems like there's a lot missing. How can I get the drivers that I need?

Satellite P100-ST9012 (PSPA6U-02E012)
I don't know why the paucity of drivers at that site.
The Toshiba drivers and utilities for the following model in the same part-number family (PSPA6U) should work just fine.
Satellite P105-S9312 (PSPA6U-021019)
They are here.
Be sure to install the Intel chipset software followed by the nVidia display driver prior to any other drivers. Install the Hotkey Utility before any other Toshiba utilities.
-Jerry

Satellite L30 (PSL30A) - Need new drivers for Windows 7

Hello I am trying to update my notebook from Windows XP to Windows 7 and need new drivers.
My machine specs
Satellite L30 (PSL30A-00100E)
1.6 Celeron M
2GB RAM
40gb disk space
ATI gfx card (Radeon 200m?)
Intel chipset
Realtek RTL8139/810x family network card
Realtek High Definition Audio Device
Only the gfx card, sound card and network card need new drivers
Hopefully I can do this

Thanks so much for the swift reply's :) I had Windows XPsp3 running very well on this old computer and was quite happy with it. I decided windows 7 being new I'd give it a go anyways, so I can go back if I have to. I am going to battle on though I think this is achievable. Found this thread on another website, I am giving this solution a go www.sevenforums.com/graphic-cards/35629-radeon-xpress-200m-problems.html as it sounds promising.
Thanks for your help...... next the soundcard......lol :)

Uninstalling Via Audio Drivers????

Can anyone tell me how to remove the via audio drivers on my K7T266 Pro,its doing my head in can't install my new sound card without and the via sound isn't working properly eiither!???

4in1 driver
VIA AC97 PCI Sound Drivers K7T266 Pro
chip ID's
VT82C686A
VT82C686B
VT8231
VT8233
VT8233A
VT8233B
VT8235
edit INF file if using VIA or INTEL sound chip
You must add the appropriate PnP identifiers for your particular system here.
;%*WDM_AC97AUD.DeviceDesc%=WDM_ICHAUD, pci\ven_VVVV&dev_AAAA&subsys_xxxxyyyy
; Replace VVVV with the appropriate Vendor ID.
; 8086 for Intel ICH platforms
; 1106 for Via Technologies
; Replace AAAA with the appropriate I/O Controller Hub ID.
; 2415 for ICH (82801AA)
; 2425 for ICH0 (82801AB)
; 2445 for ICH2 (82801BA)
; 2485 for ICH3 (82801CA)
; 7195 for Intel Mobile Platform (440MX)
; 3058 for VIA (82C686A)
; 3059 for VIA (VT8233)
; Replace xxxx with your unique Subsystem ID
; Replace yyyy with your Subsystem Vendor ID (PCI Sig ID)
; NOTE: The following are used by Analog Devices, Inc. These are examples,
; do not use these, but add your own hardware specific IDs.

Need Audio drivers (Analog Devices AD1984 @ Intel 82801HBM ICH8M HD Audio controller

Similar Messages

Maybe you are looking for