Need Help for Pivoting Columns in table
I have a data like below in the table
col1 col2 col3 col4
a b 10 jan-11
aa b 20 feb-11
aab b 30 mar-11
Need desire o/p like
col1 col2 jan-11 feb-11 mar-11
a b 10
aa b 20
aab b 30
Can anyone help me on this? decode is not the option here because my table gets dynamic data and rows count can vary too(eg. 2000).
Thanks,
-KP
Please try searching the forum BEFORE you ask a question.. There are NUMEROUS posting son the subject:
http://forums.oracle.com/forums/search.jspa?objID=f75&q=pivot
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned..
Similar Messages
-
Need help for finding oracle payables tables
Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Need help for data extraction from table
Hi all,
i have a requirement where i need to identify fields PERNR,BEGDA,ENDDA,REASN,fmlan in table PA0672 .If all these field are identical for an employee in more than one record, then greatest value of REMAN field out of these records should be displayed only in output.
How would i go about it?
Thanks
Snehasishselect PERNR BEGDA ENDDA REASN REMAN
into table itab
from PA0672.
* delete all but the highest reman value for each pernr
sort itab by pernr reman descending.
delete adjacent duplicates from itab comparing PERNR BEGDA ENDDA REASN. -
Need help with Pivoting rows to columns
Hi,
I need help with pivoting rows to columns. I know there are other posts regarding this, but my requirement is more complex and harder. So, please give me a solution for this.
There are two tables say Table 1 and Table 2.
Table1
name address email identifier
x e g 1
f s d 2
h e n 3
k l b 4
Table2
identifier TRno zno bzid
1 T11 z11 b11
1 T12 z12 b12
1 T13 z13 b13
2 T21 z21 b21
2 T22 z22 b22
As you can see the identifier is the column that we use to map the two tables. The output should be like below
output
name address email identifier TRno1 zno1 bzid1 TRno2 zno2 bzid2 TRno3 zno3 bzid3
x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
f s d 2 T21 z21 b21 t22 z22 b22
Also we do not know exactly how many TRno's, zno's, etc each value in the identifier will have. There may be only 1 TRNO, zno and bzid, or there may be four.
All the values must be in separate columns, and not be just comma delimitted. There are also other conditions that i have to add to restrict the data.
So, can you please tell me what is should use to get the data in the required format? We are using Oracle 10g. Please let me know if u need any more informationSomething like this ?
SCOTT@orcl> ed
Wrote file afiedt.buf
1 select a.name,
2 a.address,
3 a.email,
4 b.* from (
5 select distinct identifier
6 ,max(trno1) trno1
7 ,max(zno1) zno1
8 ,max(bzid1) bzid1
9 ,max(trno2) trno2
10 ,max(zno2) zno2
11 ,max(bzid2) bzid2
12 ,max(trno3) trno3
13 ,max(zno3) zno3
14 ,max(bzid3) bzid3
15 ,max(trno4) trno4
16 ,max(zno4) zno4
17 ,max(bzid4) bzid4
18 from (select identifier
19 ,decode(rn,1,trno,null) trno1
20 ,decode(rn,1,zno,null) zno1
21 ,decode(rn,1,bzid,null) bzid1
22 ,decode(rn,2,trno,null) trno2
23 ,decode(rn,2,zno,null) zno2
24 ,decode(rn,2,bzid,null) bzid2
25 ,decode(rn,3,trno,null) trno3
26 ,decode(rn,3,zno,null) zno3
27 ,decode(rn,3,bzid,null) bzid3
28 ,decode(rn,4,trno,null) trno4
29 ,decode(rn,4,zno,null) zno4
30 ,decode(rn,4,bzid,null) bzid4
31 from (select identifier,
32 trno,bzid,zno,
33 dense_rank() over(partition by identifier order by trno,rownum) rn
34 from table2)
35 order by identifier)
36 group by identifier) b,table1 a
37* where a.identifier=b.identifier
SCOTT@orcl> /
NAME ADDRESS EMAIL IDENTIFIER TRNO1 ZNO1 BZID1 TRNO2 ZNO2 BZID2 TRNO3 ZNO3 BZID3 TRNO4 ZNO4 BZID4
x e g 1 T11 z11 b11 T12 z12 b12 T13 z13 b13
f s d 2 T21 z21 b21 T22 z22 b22
SCOTT@orcl> select * from table1;
NAME ADDRESS EMAIL IDENTIFIER
x e g 1
f s d 2
h e n 3
k l b 4
SCOTT@orcl> select * from table2;
IDENTIFIER TRNO ZNO BZID
1 T11 z11 b11
1 T12 z12 b12
1 T13 z13 b13
2 T21 z21 b21
2 T22 z22 b22
SCOTT@orcl>Regards
Girish Sharma -
Need help for my requirement...
Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
Cash in Bank
Bank A
Account ID 1 1,000,000
Account ID 2 25,000,000
Hope you can help me guys. Thank you and take care!hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec -
Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help
Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius -
Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil BhamereHi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere -
Need help for finding objects impacted by size change for an infoobject
hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variablesHi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Need help for user exit mereq001
Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar -
Need help for interface to process employee expenses
need help for interface to process employee expenses
i have used the interface tables as
AP_INVOICES_INTERFACE
AP_INVOICE_LINES_INTERFACE
are they the right one
is there a concurrent program or any API for doing interfacehi,
i think what ever table are using for interfacing expenses correct.
but you have to enter invoice type as expense report.
Regards,
Srikanth -
Default value for a column in Table Control
Hi friends, can i set dinamcally a default value for a column in table control?, this column is check type. This default value must appear in empty rows,
thanksADD A MODULE AS Module yyyy In ur PAI.
as
In PAI.
LOOP at itab.
Module YYYY
ENDLOOP.
Module YYYY.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ITAB-VAL.
ITAB-VAL = 'XXXXXXXX' "(DEFAULT VALUE)
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
End module.
*note
make this event work only if the previous column is filled okay.
the display will be in display mode on the screen as screen-input = 0.
see that in the table control u can get the table field for all the rows even though you are processing on some fields .
so what u do is make that particular filed masked(no i/p field and populate the field that will be better instead of populating all the columns okay.
hope this helps you out ,
regards,
vijay. -
Create search helps for fields of custom tables
Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe -
Need help for use crm fields into EJB2
hello i need help.
i have one db table (table_1):
id_1
field_1
nad the second table that depends from the tale 1:
id_2
fields
id_1
id_1 is the field that join the table 2 with the table 1.
can anybody helps me to implemet this relationship into the xml files and into the java class?
into the java class for the second table i have:
public abstract long getId_1();
public abstract void setId_1(long Id_1);
public abstract long getId_2();
public abstract void setId_2(long Id_2);
public abstract String getField();
public abstract void setField(String field);
how must i reference the relation into the bean and into the confdiguration xml files (i use Weblogic 8 and EJB 2.1)
ThanksSRM doesn't use kind of "cockpit" LO-like in ECC.
Overall picture:
http://help.sap.com/saphelp_srm40/helpdata/en/b3/cb7b401c976d1de10000000a1550b0/content.htm
If you setup data flows accordign Business Content of SRM:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
Then just perform an init load and schedule the deltas. -
I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please
http://www.apple.com/support/itunes/contact/
-
Search help for a field in table control based on another field value
Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewardedHI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
TEXTCODE LIKE ZXX-TEXTCODE,
TEXTDESC LIKE ZXX-TEXTDESC,
END OF it_value4.
progname = sy-repid.
dynnum = sy-dynnr.
SELECT TEXTCODE TEXTDESC
FROM xxxx
INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TEXTCODE'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
value_org = 'S'
TABLES
value_tab = it_value4.
endmodule.
Message was edited by:
veereshbabu ponnada
Maybe you are looking for
-
I have a new Samsung 5500 32" Smart TV, and I'm trying to connect it to my Macbook Pro using a Belkin HDMI to MiniDisplay Port. The computer will not recognize the TV as a display (the arrangement tab will not show up) and the TV will not show the co
-
PDF text pages in iPhoto books
I'm not sure that this is a problem. I just want reassurance before I click the ORDER BOOK button and buy the iPhoto book I have created. I have imported PDF pages of text into the book, as I was able to get more control over the text layout that way
-
Everytime I click on the iphone tab when I connect my iphone to my computer via USB and when I go to click on the iphone tab which would usually say jades iphone it disappears???
-
Contracts Price updation for every three months
Hi Experts, we need to change multiple condition enties in contracts.All prices need to change and we need to update them to new level. Since the field NET PRICE is grey I have to open each individual item in the valid period and change price by pric
-
Setting gmail to see only new email on iPhone 3gs
Hi I only want to see new email when I access gmail on my iPhone, but I see every email that has ever been sent. I need to keep what I have on my computer, but don't need anything but new to come thru on iPhone. Everytime I start to delete what I don