Need Help on Troubleshooting IR Error: Failed to acquire access to database
Hi there,
I have been struggling with the following error "Failed to acquire access to database" and ODBC driver error "Data source name not found and no default driver specified" when opening an IR document for a few weeks.
The IR document uses an oce file called ABC.oce and DAS has been configured accordingly.
ODBC System Data Source called ABC created on server running IR DAS as follows:
- Driver: Oracle in OraClient11g_home1
- TNS entry: ABC
- Connection tested successfully;
IR DAS entry ABC created as follows:
- Connectivity Type: ODBC
- Database Type: Oracle
- Hostname: ABC
oce file called ABC.ore created as follows:
Interactive Reporting Database Connection
Connection Software: ODBC
Database: ORA8
Host: ABC
Username and password have been entered in the oce file as well.
What possibly have I missed?
Any help will be highly appreciated.
Are you using the Hyperion ODBC drivers which comes with the Hyperion installation?
Similar Messages
-
Help! Error: Failed to open Address Book Database on Palm Desktop
In advance, thank you, thank you, thank you to the person who saves me from this error! I have no idea what I've done to deserve this!?! So, thank you for helping!!!
Here's the problem:
When I double click on the Palm Desktop icon on my desktop, I get: Error: Failed to open Address Book Database on Palm Desktop
And then, I get: This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor.
When I click on the details button, it says: PALM caused an invalid page fault in
module MFC42.DLL at 0177:5f404045.
Registers:
EAX=0082fad8 CS=0177 EIP=5f404045 EFLGS=00010202
EBX=00000000 SS=017f ESP=0082fa94 EBP=00855d0c
ECX=5f4d1c58 DS=017f ESI=0082fad8 FS=572f
EDX=00017b84 ES=017f EDI=00000008 GS=0000
Bytes at CS:EIP:
8b 07 3b c8 74 34 83 79 f4 00 7d 0f 83 c1 f4 3b
Stack dump:
00000000 008558c0 004b5d3d 00000008 01befe17 0082fad8 008559cc 008558c0 00855d0c 00000000 00000010 5f4d1c58 00000000 00000000 00000000 00000000
Again, thanks for your help in advance!
Post relates to: Palm VxI've seen a lot of people post a message that's basically like the problem I'm having. I'm sending this to everyone who had the same general type of question in hopes that my fix might cure your problem also.
My Palm Desktop (4.1.4) would open correctly the first time after installing, but after doing a hotsync it would crash every other time it was opened (using a Tungsten E). I'm running Windows XP Professional, and it would give an error saying "Windows XP has encountered an error and needs to close", or something like that.
I did the usual. Removed the program and reinstalled, which didn't work. I also went through the tedious process of uninstalling the software, then removing every registry entry by hand that referenced the Palm or Pocketmirror, which also didn't work.
I searched through the support files on palmone.com and found something that gave me an idea. It talked about removing a corrupted file to fix problems with the datebook. I hadn't been getting any errors pointing to a specific problem, but on a hunch I deleted the entire address folder out of the Palm directory. That did the trick!
A corrupted address book in the Palm Desktop software was keeping it from running. The problem was how to fix the corruption, which I eventually found on a menu option in the Palm Desktop software.
Below is the fix that worked for me. Caution! Only do this if you have all of the current info in your Palm, because it will erase what's on your Palm Desktop.
1. Go to your Palm folder on your pc (default install location is c:\palm) and open the folder for your user.
2. Delete the address, datebook, expense, memopad, note pad and todo folders.
3. Open the Palm Desktop program.
4. Do a hotsync.
5. Important! Don't click on anything else in the Palm Desktop after doing the hotsync. If you change to one of the areas that has corrupted data, it will immediately crash.
6. Right after doing the hotsync, click Tools on the top menu in the Palm Desktop, then Options. Click on the Tools tab and then click Check Now to fix the corrupted data.
7. Click OK.
That should hopefully get you running again. Let me know if that worked for you. -
I need help with this code error "unreachable statement"
the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AMladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class -
I need help installing Acrobat Reader - messaged failed to connect to a DDE Server. Can't access documents
Please see if "acrobat failed to connect to dde server" when openning Adobe Acrobat XI PRo helps.
-
I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
I urgen need help
thanksThis is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html -
Palm Desktop software - Fails to open with msg "Error: Failed to open Address Book database"
In July 2009 I dropped my trusty Visor on a tile floor and it stopped working. So, in the meantime I have been using only the Palm Desktop software.
Just yesterday, when I attempted to launch the Palm Desktop software, it failed with the message “Error: Failed to open Address Book database”. I think this error was caused by a very ungraceful shut-down of my Win XP system yesterday.
I really do need to use the Palm Desktop software for my address list, calendar, and memo. The problem is that the error with the Address Book database seems to be preventing the Palm Desktop software from initializing.
I am using Palm Desktop 4.0.1 on Windows XP SP3. I do NOT have an export file of the Palm address book or other databases. However, I do have five levels of backup history on my external Maxgor backup drive.
Specifically, on my current c drive I have files in the directory:
C:\Program Files\Handspring\WR\address
address.bak 5/16/2009 (from last sync before I broke Visor)
address.dat 5/24/2011
Personal.ABA 11/6/2008
Unfiled.ABA 3/28/2008
On my most recent backup of my system, there are the following files:
address.bak 5/16/2009 (from last sync before I broke Visor)
address.dat 5/12/2011
Personal.ABA 11/6/2008
Unfiled.ABA 3/28/2008
I have not listed the four older backup versions.
I haven’t tried any corrective measures yet (I don’t want to make matters worse) and am hoping that someone can guide me along the right path.
Is it possible for me to just rename the “current” address.dat file to something like address.SAV and then copy the Address.dat file file with date of 5/12/2011 into the current directory. Will the software then just use the older version of the data, or must I do something else.
I am grateful for any assistance. Thank you very much.
Post relates to: Visor Deluxe
Post relates to: Visor DeluxeThanks for the speedy response. However, I read the article for which you provided the link, and I hve also read many other articles that I found via search, but I don't think these will help me. All of these articles seem to assume that (1) you have a handheld to which you can sync and thereby rebuild the database on the PC, or (2) you have a backup that you created via the Palm Desktop export function. Unfortunately, I have neither and so I don't think any of these solutions will work for me.
I did read with great interest an article that stated that recent versions of Palm Desktop have a built-in function that will repair a corrupted Datebook database. Will this also fix a corrupted Address Book database which is my problem?
So, I downloaded and attempted to install the latest version of Palm Desktop. I was careful to read the instructions that stated NOT to uninstall my current version of Palm Desktop, but to just install the latest version on top of my current Palm Desktop. However, when I attempted to do the installation, the installer software said it could not install on top of my current software and that I should first uninstall my current software.
I have some questions now:
(1) If I uninstall my current version of Palm Desktop, will this destroy my Address Book, Datebook, and Memo databases ( I don't care about the ToDo database)? If so, what can I do to preserve those databases?
(2) Is there really a function built in the recent versions of Palm Desktop that will fix a corrupted database? Is this an "automatic" function that will detect and fix a broken database or is this something I will have to invoke?
Thanks for your help.
Gdad -
Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered -
Hello,
I have developed one SSIS Package in SSDT 2012 to create Reporting Database from SQL Datasource and 1 SharePoint List.
On Development Environment : (Windows Authentication)
Here everything is running fine.
On Test Environment Client Side : (Windows Authentication)
Deployed successfully.
Validating successfully.
While executing the package: getting below error.
SSISPackage:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error Code : 0x80040E21.
An OLE DB record is abailable. Source: "Microsoft OLE DB Service Componenets" Hresult: 0x80040E21 Description: "Multipe-step OLD DB operation generated errors. Check each OLD DB status value, if available. No work was done.".
Execute SQL Task: Error: Failed to acquire connection "ReportingDB". Connection may not be configured correctly or you may not have the right permissions on this connection.
I have done below things:
On SSIS Package side,
1. DelayValidation is Set to True for all the connections and each tasks in package
2. RetainSameConnection : True
3. ProtectionLevel : DoNotSaveSensitiveData
On SSMS,
1. Created one Credential
2. Create Proxy under SSIS SQL Service Agent to run package as Windows User
3. Checked all the permissions and roles.
Below is the connection string which I am using.
Data Source=DBTEST;Initial Catalog=ReportingDB;Integrated Security=SSPI; persist security info=False;
Trusted_Connection=Yes;
Can anyone please help me? As I am trying to resolve this error for the last 4 days and could not find any solution yet.
Thank you,
Mittal.Can you try changing protection to - EncryptSensitiveWithUserkey
can you also enable DTC
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Please mark
this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error:Failed to retrieve data from database [Vendor Code:3001]
Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
SELECT "CLIENT"."CLIENT_NAME",
"RECOVERY"."AMOUNT",
"RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
"RECOVERY"."ALLOCATION_CHECK_AMOUNT",
"RECOVERY"."RECOVERY_DATE"
FROM "HRI1_OWNER"."CLIENT""CLIENT",
"HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
"HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
"HRI1_OWNER"."RECOVERY""RECOVERY"
WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
AND "CLIENT"."CLIENT_CODE" <> 'CLIENT 1'
AND "CLIENT"."MAJOR_CLIENT_ID" in
(Select major_client_id
from major_client
where major_client_code in ('LA', 'PFG'))
ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM@oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
@centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
Thanks
Edited by: user11961230 on Nov 12, 2009 7:12 AM -
Need help using dbms_scheduler to submit an immediate job on the database
Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
How do I pass these values when I run my job? Can anyone help?
begin
dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
program_type=> 'STORED_PROCEDURE',
program_action=> 'TTMS.dropperVacationConflict_Notify',
number_of_arguments => 3,
enabled=>true,
comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
end;
begin
dbms_scheduler.create_schedule
(schedule_name=> 'INTERVAL_EVERY5_MINUTES',
start_date=> trunc(sysdate)+18/24,
repeat_interval => 'freq=MINUTELY;interval=5',
end_date => null
comments=> 'Runtime: Every day all 5 minutes, forever'
end;
begin
dbms_scheduler.create_job
(job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
schedule_name => 'INTERVAL_EVERY5_MINUTES',
enabled => true,
auto_drop => true,
comments => 'Job to notify PCM of Dropper Vacation Conflicts'
end;
/And I use this to execute the job as needed...
begin
dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
end;
/Duplicate Post
Need help using dbms_scheduler to submit an immediate job on the database -
I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- EvenstarlineHi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account. I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well. I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline -
Need help iNSTALLING cr2008..GET "FAILED TO REGISTER" ERRORS
I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctlyI would suggest making sure your machine is clean. Contact support for the steps to fully uninstall CR. For example, here are notes to uninstall previous versions of CR:
1218535 - How to manually uninstall Crystal Reports XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333533333335%7D.do
1216945 - How to manually uninstall Crystal Reports 10
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343335%7D.do
1216947 - How to manually uninstall Crystal Reports 9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343337%7D.do -
Need help in analysing the error in JasperReportIntegration Test Applicatio
Our DBA installed Jasper Reports Integration kit Version 1.1.0.0 in our test environment. Apex version is 3.2.1.00.12. Oracle database is 11g and Apache Tomcat is 7.0.26
I was able to bring up the Jasper Reports Integration test application. When I navigate to "Report Tester" tab, changed the JasperReportIntegration URL to the correct localhost and then cklick the "Show report (directly)" button, I got this message:
Jun 12, 2012 11:41:58 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:736)
Can anyone help me understand this error and let me know if this message is caused by installing the jasper report integration kit incorrectly?
Thanks.
Edited by: bratz69 on Jun 12, 2012 7:35 PMHi Dietmar,
Thanks for your reply.
There's no jasperreports-fonts-3.7.4.jar file in the webapps/JasperReportsIntegration/WEB-INF/lib folder. The only font file available is jasperreports-fonts-4.5.0.jar. I've downloaded the 3.7.40 jar file and saved it in the same folder without deleting the 4.5.0.jar. I tried to run the Test application again and still give me the same error.
Jun 13, 2012 3:58:26 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:736)
I also tried the suggestion from the link provided by Nick. However, the syntax is for SUN environment and we are using IBM so I searched the equivalent of that command in IBM. Our DBA added the Java system property in the startup script by adding these 2 lines. But it errored out on the first 2 lines. I'm not sure if I do have the right syntax.
java.version=1.4
java.awt.headless=true
----- Error
27) ./startup.sh
./startup.sh[25]: java.version=1.4: not found
./startup.sh[26]: java.awt.headless=true: not found
Using CATALINA_BASE: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_HOME: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_TMPDIR: /dbfupg/apache-tomcat-7.0.26/temp
Using JRE_HOME: /usr/java6/jre
Using CLASSPATH: /dbfupg/apache-tomcat-7.0.26/bin/bootstrap.jar:/dbfupg/apache-tomcat-7.0.26/bin/tomcat-juli.jar
----- Start up script
27) cat startup.sh
#!/bin/sh
java.version=1.4
java.awt.headless=true
os400=false
case "`uname`" in
OS400*) os400=true;;
esac
# resolve links - $0 may be a softlink
PRG="$0"
while [ -h "$PRG" ] ; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> \(.*\)$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
PRGDIR=`dirname "$PRG"`
EXECUTABLE=catalina.sh
# Check that target executable exists
if $os400; then
# -x will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
eval
else
if [ ! -x "$PRGDIR"/"$EXECUTABLE" ]; then
echo "Cannot find $PRGDIR/$EXECUTABLE"
echo "The file is absent or does not have execute permission"
echo "This file is needed to run this program"
exit 1
fi
fi
exec "$PRGDIR"/"$EXECUTABLE" start "$@"
BTW, Thanks for the update on the new version.
Thanks!
Edited by: bratz69 on Jun 13, 2012 4:48 PM -
Need help in understanding the error ORA-01843: not a valid month - ECX_ACT
Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu. -
Need help... getting an error message "not enough storage" for icloud and it will not let me get passed the message
See if this helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Maybe you are looking for
-
MacBook Pro Retina doesn't show correct colour spectrum
I'm having trouble with my late 2013 13" MBPr display, it's displaying low colour spectrum, something like 16 bit colours. I took a photo of my screen right now, and it display something like this. As you can see the cat colour look really washed out
-
Movies no longer play in iTunes or ATV
I installed the software update for iTunes 11.1.5.5 and now movies (m4v from Handbrake) stored on my PC no longer play in iTunes or Apple TV. These have been playing fine for years, so I'm guessing that 11.1.5.5 has something in it that suddenly does
-
"command disabled" when setting IP address on AIR-LAP1252G-A-K9
Hi, I am trying to set ip address on cisco ap AIR-LAP1252G-A-K9 using the "lwapp" command but get message "command is disabled" I am connecting via console cable to ap. I have already reset ap to defaults. Not sure why I'm getting this error "command
-
Learn how to use the Print module to bring your images into the spotlight and share with clients, friends or family. Also, see the new tools for making custom contact sheets and print packages. http://adobe.ly/wqFX7Y
-
This is kind of a wierd question, and I've searched for an answer with no luck. Previously on my phone, under the pictures the two options at the top were for the Cache and the Media Card which upon selecting the Media Card, it would let you view th