Need Help Setting Up Raid Card with Windows xp pro 64 bit

I need a 64 bit driver for my k8t neo-fis2r motherboard. I tried to use the disk that came with the board, but I keep getting an error. please help.

go to the via website and download the via 5.00a package, it contains a driver for the onboard via controller!
dont try the promise one, it wont work! tried it several times! we have to wait for an updated driver to be able to use it!

Similar Messages

Need help setting up Raid HD with 10.5?

I have a 2tb external HD, my G5 sees it as a 1x2TB (not 2x1TB), I am running out of space and I was thinking about getting another 2TB HD.
Is there a way, using Leopard, to mount the two drive as one 4TB?
Thanks
Fred

Hi Fred,
1. Test and verify your 2TB clone. If at all, clone the clone to somewhere else.
2. Connect the new 2TB drive, erase it and the other 2TB drive (thus both drives you want to use to create your "main" 4TB drive) in Disk Utility.
3. Create a striped array. From the DU helpfile:
Select one of the disks that you want in the set, and click RAID.
Click Add , and type a name for the RAID set.
Choose a format from the Volume Format pop-up menu.
Choose Striped RAID Set from the RAID Type pop-up menu.
Drag the disks you want to use in the set to the list on the right.
Click the Options button to specify an optimal block size for the data stored on the set.
Set the block size to match the size of data stored on the set. For example, a database might store small units of data, so a small block size might be best. A video processing application might require fast throughput of large amounts of data, so a larger block size might be best.
Click Create.
4. Clone over from the 2TB clone to the new 4TB array.
5. Repeate steps 2 and 3 to create the 4TB "clone" drive.
6. Clone back from the "main" 4TB drive to the new 4TB clone array.
You will find lots of info in the DU helpfile on RAID options. There's also a good article on Wikipedia (search for RAID). Plus loads of posts here (do a "site:discussions.apple.com" search on Google).
/p

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?
Can anyone point to a specific reference that says Type 1 fonts should or shouldn't work?

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

I need an audio driver for Yoga 13 with Windows 7 Pro 64 bits English

Hi all,
I downgraded my Yoga 13 from Windows 8 to Windows 7 pro 64 bits, and ever since then I have a problem with my microphone.
Skype finds the microphone and can use it, calls are all working fine, but any other program using audio does not work with the microphone.
After troubleshooting, I concluded that I need to update the driver but I cannot find it. Anything that I find on the Lenovo support pages does not install (event the one found on this page: http://support.lenovo.com/fr/fr/downloads/ds002860).
After looking at this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/I-need-an-Internet-driver-for-Yoga-13-wit.... I figured I would to be provided with the link by someone from Lenovo support.
Here's the hardware ID of the soundcard: HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSYS_17AAA001&REV_1000. In Windows it is recognized as High Definition Audio (in the device manager).
Thanks a lot for your help.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Officejet 7310 Installation Issue(s) with Windows 7 Pro 64 Bit OS

Recently purchased Windows 7 Pro 64 bit OS platform laptop. Downloaded latest driver for All-In-One and executed. Followed USB connection directions, Windows Driver installation indicated all drivers installed completely, but the last step (configuration) failed (after running about five minutes).
Device Manager indicates "Officejet 7300 (DOT4PRINT)" under "IEEE 128.4 compatible printer" normal; also indicates "Officejet 7300 series (DOT4USB)" under "USB controllers" normal... One can print without any problem.... Other than the failure message at the end of the installation, the "HP Solution Center" won't launch....error message includes: "HP Solution Center cannot run because your device installation is not complete."
I have completely uninstalled and reinstalled to no avail.... I would appreciate some help. thanks.... Jim

Hi JRParker,
This document on A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows will assist in narrowing the cause of the installation interruption.
I will need to know if you see a four-digit error code, or if the message contains a ".msi" or ".dll"
file association.
Please take a screenshot of this error message by:
1.) Clicking on the Print Scrn
2.) Open Microsoft Paint
3.) Click on File, then Paste. The screenshot should appear on the canvas.
4.) Click File, then Save as. You will have an opportunity to save the document to the desktop with a unique name.
5.) Click Save.
I am looking forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

NX8800GT cards vs Windows XP Pro 64 bit

Does NX8800GT card has Windows XP Pro x64 Edition driver support?

MSI doesn't make the drivers for the video cards. The drivers are made by the chipset maker, in your case, nVidia. MSI will add a utility or two to the installation, but you will also find(the same with other manufacturers as well) that the drivers are also older(sometimes much older) than the newest drivers from the chipset maker. I never use the drivers that come with the CD or from the card manufacturers site(for video cards). I use the ones from the chipset maker, nVidia for nVidia, and ATI for ATI.

Z68 G3 - Need help setting up RAID + Smart Response please.

Ok, this is the first time I am going to be setting up RAID. I have two new 64 GB SSD's hooked up to SATA 1-2 (The first 2 white SATA 6.0). I go into BIOS, and I set the settings to RAID, and then I enable SATA 1 + 2. I save and reset, and during the post, I press ctrl I. I see the raid settings with the raid devices... like its going to go into RAID set up; however, it then shows the logo screen for msi m/b and then goes to command and does nothing after that.
What am I doing wrong? Do I need to install the controller drives via floppy drive? Bad thing is I don't have a floppy drive, but I can buy one. Is there any way to install the controller with out the floppy? Can it be done via USB?
I just built this new system today, so I am very anxious to get it up and running, so please reply fast hehe Im waiting =D

Never mind, I wasn't pressure Ctrl I correctly

Need Help Setting UpWRT54G2 V1.5 In Windows 7

First I apologize if I put this question in the wrong place.
I am having a really hard time setting up the WRT5462 in Windows 7. The setup disk that came with the router doesn't work. It can never detect the router when it asks to plug the router in.
So I tried to set up the router manually in the web browser using 192.168.1.1 and I still cannot get my computer to recognize the router. Furthermore, I cannot get Windows to recognize the router in my network settings.
If anyone can walk me through this process to set this up, I will be forever grateful.
Many thanks,
David

Here is the support page - http://support.toshiba.com/support/modelHome?freeText=2520793 as you found very little XP drivers there.
These XP drivers may work for you - http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
Start with the video driver.
The recovery media will fully restore the laptop to like new out of box state with all that came on it when it was new.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Need help setting up color scanning through Adobe 9 pro

Unable to set-up the color scanning through adobe 9 pro, need help!

Obviously, FireWire is a fast connection, but for changing metadata, USB is plenty fast. Why it takes so long is anyones guess. Is it a USB 2.0 drive? Using external drives can be tricky. My father uses them for his gigantic library of almost 80,000 songs. When you have it setup properly, it works fine, but if you say forgot to have the external drive mounted when you launch iTunes, iTunes defaults the library back to your Music folder, then when you start importing, it puts in on the internal drive, then you have to go back and reset it, etc. Problem, with iTunes alone, you can only set one library, so if you want to use two drives, you will have to have one set at any given time.
So you could set the music one first, add to the library, then set it for movies, then add those to the library. Then keep the library set to the one you use most frequently, so you don't have to always switch. Once you import all media, and iTunes "knows" where to find the files, you can play them with no problems with two drives.
For wireless, you have a couple choices. If you have two Macs, you could keep one connected to the two drives, then with the other computer, just connect to the network and share the iTunes library so your other computer has access. If you want the music stored on a drive accessible wireless, you'll probably have to look to NAS, or some form of wireless storage. If you do that, their may even be a better third party software solution other than iTunes for managing multiple libraries.
This is something iTunes really needs. As libraries grow, one drive just isn't enough often.
Bryan

HP Laser Jet 6P does not work with Windows 7 Pro 64 bit

HELP!!
I have a HP Laser Jet 6p with the standard Centronics Parallel Port on the printer.. i bought a new computer and it does NOT have the Parallel IO port on the motherboard.. i am using Windows 7 Pro edition 64 bit..
I purchased a centronics to usb cable from Cables Unlimited.. this cable does NOT support Win 7 64 bit... i spoke to the Tech support there....
The printer is 11 yrs old.. but works like the day it came out of the box..
Can someone please Help .. i am in dire straights..
Ty
Henfischer
<text removed for privacy>

Hi,
I have to buy a new computer and I was worned about this happening. Did you ever get it resolved or do I have to downgrade to XP to keep my printer?
Thank you for your help
CMLN.

SAP Client is very slow with windows 8 Pro 64 bit

Dear All,
I'm currently using Win8 Pro 64bit OS and SAP 7.30 PL3 am facing a slow performance compared to my old Win 7 system with 7.20,
Actually i upgraded one of my users OS with Win8 ( previously it was Win7 32 bit ) after that SAP started giving issues i tried 7.20 with PL 14 and 7.30 with PL 3 but both are hanging while the time of login...... means after entering my credentials it will take more than one min for loading my data. In the same time other windows 7 systems with 7.20 pl 10 is taking maximum of 2 sec for loading the data, using the same credentials.

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Need help setting up a network with new Airport Extreme

Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Need Help Setting Up Raid Card with Windows xp pro 64 bit

Similar Messages

Maybe you are looking for