Need help with Image refreshing using the 1408

I'm trying to develop a VI that allows user control over the image refreshing. In the end I would like something that allows the user to view a live or somewhat close to live image from the camera, and then when they desire freeze the image. The catch is I would also like the images to be color, and to allow the user to again view a live image if they wish.
Essentially I want the user to be able to focus the camera and set light levels while viewing a live image on the screen (again flicker is ok, just as long as it has a decent refresh rate). And then when ready freeze the image and use the last image captured (the frozen one) for some analysis purposes.

The simplest way to do this is to put the IMAQ Snap vi inside a while loop. Initialize your image and IMAQ outside the loop. Create an "Acquire" boolean control on your front panel. Put the Snap & display inside a case statement so that it only acquires a new image if the Acquire button is in the "On" position. This will give you a pretty smooth update rate and is very easy to program.
If you want an update rate closer to the frame rate of the camera, you can set up an IMAQ Grab outside the loop, then read the latest image and display it in the case statement.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

I need help with this tutorial from the Adobe website

I'm almost done with my flash game which I created with flash pro cc. And i have been looking for tutorials to integrate my game to the Facebook and this is the only one I found. http://www.adobe.com/devnet/games/articles/getting-started-with-facebooksdk-actionscript3. html
Am I on the right track?? The editor uses Flash Builder but I'm using Flash Pro cc.
--- On Step 2: "Set up a development server for the Flash app",
Sub-step #2. "To simplify the development process, configure Flash Builder to compile into your htdocs/fbdemo folder and run (or debug) the app on your server (see Figure 2)."
1) But I can't find "ActionScript Build Path"(which is highlighted on the Figure 2 screenshot) or anything like that in Flash pro. Same for the "Output folder URL".
Can I actually do the same things with Flash Pro cc?? Also #3 is "Verify that your app runs from your server." How do you run your app from your server??
---- On Step 4: "Initialize the Facebook JS SDK",
2) so if I setup a server on a localhost just like the tutorial, I don't need to change the following? This is on line #6.
channelUrl : 'www.YOUR_DOMAIN.COM/channel.html'
can i just leave it like that ?
3) So if I complete the tutorial, can facebook users play my game? or do i have more things to do?
4) is there any other tutorial for Flash Pro CC to Facebook integration???
Thank you so much for your help and time.

this is an excerpt from http://www.amazon.com/Flash-Game-Development-Social-Mobile/dp/1435460200/ref=sr_1_1?ie=UTF 8&qid=1388031189&sr=8-1&keywords=gladstien
The simplest way to hook into Facebook is to add their Plugins to add a Like button, Send button, Login button etc to your game. If you only want to add a Like button to a page on your website, you can use the following iframe tag anywhere (between the body tags) in your html document where you want the Facebook Like button to appear:
<iframe src="http://www.facebook.com/plugins/like.php?href=yoursite.com/subdirectory/page.html" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
Where the href attribute is equal to the absolute URL to your html file. For example:
<iframe src="http://www.facebook.com/plugins/like.php?href=kglad.com/Files/fb/" scrolling="no" frameborder="0" style="border:none; width:500px; height:25px"></iframe>
points to index.html in kglad/com/Files/fb.
However, to get the most out of Facebook you will need to use JavaScript or the Facebook ActionScript API and register your game on the Facebook Developer App page. Before you can register your game with Facebook, you will need to be registered with Facebook and you will need to Login.
Once you are logged-in, you can go to https://developers.facebook.com/apps and click Create New App to register your game with Facebook. (See Fig11-01.)
***Insert Fig11-01.tif***
[Facebook's Create New App form.]
Enter your App Name (the name of your game) and click continue. Complete the Security Check (see Fig11-02) and click Submit. You should see the App Dashboard where you enter details about your game. (See Fig11-03.)
***Insert Fig11-02.tif***
[Security Check form.]
***Insert Fig11-03.tif***
[App Dashboard with Basic Settings selected.]
If you mouse over a question mark, you will see an explanation of what is required to complete this form. Enter a Namespace, from the Category selection pick Games, and then select a sub-category.
Your game can integrate with Facebook several ways and they are listed above the Save Changes button. You can select more than one but for now only select Website with Facebook Login and App on Facebook, enter the fully qualified URL to your game and click Save Changes. (See Fig11-04.)
***Insert Fig11-04.tif***
[Facebook integration menu expanded.]
You can return to https://developers.facebook.com/apps any time and edit your entries. Your game(s) will be listed on the left and you can use the Edit App button to make changes and the Create New App button to add another game.
Click on the App Center link on the left. (See Fig11-05a and Fig11-05b.) Fill in everything that is not optional and upload all the required images. Again, if you mouse over the question marks you will see requirement details including exact image sizes for the icons, banners and screenshots.
***Insert Fig11-05a.tif***
[Top half of the App Center form.]
***Insert Fig11-05b.tif***
[Bottom half of the App Center form.]
When you are finished click Save Changes and Submit App Detail Page. You should then see Additional Notes and Terms. (See Fig11-06.)
***Insert Fig11-06.tif***
[Additional Notes and Terms.]
Tick the checkboxes and click Review Submission. If everything looks acceptable, click Submit. You should then see something like Fig11-07.
***Insert Fig11-07.tif***
[After agreeing with Facebook's terms, you should be directed back to App Center and see this modal window.]
You are now ready to integrate your game with Facebook's API. Because there is a Facebook ActionScript API that communicates with Facebook's API, you need not work directly with the Facebook API.
But before I cover Adobe's Facebook ActionScript API, I am going to cover how you can use the Facebook JavaScript API directly. There no reason to actually do that while the Facebook ActionScript API still works but by the time you read this, the Facebook ActionScript API may no longer work.
In addition, this section shows the basics needed to use any JavaScript API so it applies to any social network that has a JavaScript API including the next "hot" social network that will arise in the future.

Need help with finding a workaround: the shotcut ctrl+click opens 2 tabs in my case

Hello!
I have several links with an onclick event, which contains some javascript handling and window.open() after it, and they have attribute href="javascript:void(0);" as well.
When user try Ctrl+click Firefox opens him 2 tabs: the first one with "right" content and the second with javascript:void(0).
I've tried to set href="#" and in this case Ctrl+click works as I want, but on the original tab the user is redirected by the browser to the top of the page. The empty attribute (href="") also results 2 tabs. Maybe there is some value of the href attribute with which everything will work as I want? I've fed up with this and will be appreciated a lot if you help. Thanks.
== This happened ==
Every time Firefox opened
== User use Ctrl+click

I won't be searching thru all that code to try to find something relevant to your post, but if you are using a Loader to load the images, you can get the width and height as soon as the loading is complete using the loader object (loader.width, loader.height). You just need to wait until loading is complete, so you'll need a listener for that if you don't have one already.

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Need help with image upload and preview display

hi guys,
I'm trying to upload image and then display it as a preview, but when upload form submits to the same page image placeholder does not refreshes it's source and displays the same image as before.
Image 4.jpg already exists.
I upload it with nameConflict = "overwrite"
upload form points to the same page, therefore page reloads
In IE image placeholder does not display the new image, but shows the old one until I refresh the page with F5 and resend information, however if checked, image in the file is already different.
In Firefox, sometimes it works and image refreshes, sometimes not.
any help would be greatly appreciated!
cheers,
Simon

Hi Daverms,
With your code you suggest to not only upload the image but make a database entry too. However my intention is to firstly upload the file, and show a preview. Then if user is satisfied with what he sees, he presses "aprove" button and therefore makes a datase entry. Then the photo number will increase by one.
Until user is not aproving the photo he can upload any image again and again, but the new image will be always given the same name (example 4.jpg) and overwriting the old one.
I believe the problem persists because browsers are loading image with the same name from the cache, and not from the actual location. Therefore when I refresh the page it catches the correct image.
If I follow your code, every time I upload the image, name of it is different, therefore browser cannot find it in the cache and is forced to load one from the server.
I wonder is there any way to avoid this cache problem?
cheers,
Simon

Need help with image push script please

I am playing around with some javascript for the push / pull image used on webcam sites. When i run one, it never refreshes the image in my browser when I change the image. It only does if I delete the image and then repost it. It seems my browser looks for the cache or something first. How can I make ANY browser force to load the image without deleting it first?
Here is the script I am using:
<SCRIPT>
<!-- ===================
browserType = navigator.appName;
newImage = new Image();
Srvr_IP= "http://127.0.0.1/myFile.jpg?";
var dly;
if (browserType == "Netscape") document.write('<IMG SRC="'+ Srvr_IP +'"
') else document.write('<IMG SRC="' + Srvr_IP +'" name=ZahidiTV2Web
Alt="Web Server is off. Please try later." border=1 >');
uniq= 1;
newImage.src= Srvr_IP + uniq;
SnapShot_Loop(4000);
function SnapShot_Loop(delay)
dly= delay
if( document.all) loadNewImage();
setTimeout("SnapShot_Loop(dly)",delay);
function loadNewImage()
Stamp = new Date();
uniq= Stamp.getTime();
document.images.ZahidiTV2Web.src= newImage.src;
newImage.src= Srvr_IP + uniq;
window.status = "Displaying live video ...";
</SCRIPT>
<P>
Hello

These forums are for Java, not JavaScript.

I am Stuck! Need Help With Multicast Streaming Using VLC Player

I have a Multicast network topology shown below
and my configs
HUB ROUTER
no ip domain lookup
ip domain name primestarhotel.com
ip multicast-routing
interface Loopback0
ip address 5.5.5.5 255.255.255.255
ip pim sparse-dense-mode
interface FastEthernet0/0
ip address 200.0.0.2 255.255.255.240
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.65
description "Server Vlan"
encapsulation dot1Q 65
ip address 10.1.65.1 255.255.255.0
ip pim sparse-dense-mode
ip virtual-reassembly
router ospf 200
log-adjacency-changes
network 5.5.5.5 0.0.0.0 area 0
network 10.1.65.0 0.0.0.255 area 0
network 200.0.0.0 0.0.0.15 area 0
ip route 200.1.1.0 255.255.255.252 200.0.0.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
no ip http server
no ip http secure-server
ip pim send-rp-announce Loopback0 scope 6
ip pim send-rp-discovery Loopback0 scope 6
ISP ROUTER
interface FastEthernet1/0
interface FastEthernet1/1
no switchport
ip address 200.0.0.1 255.255.255.240
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/2
no switchport
ip address 200.1.1.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/3
no switchport
ip address 200.2.2.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
router ospf 200
log-adjacency-changes
network 200.0.0.0 0.0.0.15 area 0
network 200.1.1.0 0.0.0.3 area 0
network 200.2.2.0 0.0.0.3 area 0
SPOKE 1 Router
interface FastEthernet0/0
ip address 200.1.1.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
no ip address
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.12
description "Workstation pc"
encapsulation dot1Q 12
ip address 10.1.12.1 255.255.255.0
ip pim sparse-dense-mode
router ospf 200
log-adjacency-changes
network 10.1.12.0 0.0.0.255 area 0
network 200.1.1.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.1.1.1
SPOKE 2
interface FastEthernet0/0
ip address 200.2.2.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
ip address 10.2.22.1 255.255.255.0
ip pim sparse-dense-mode
speed 100
full-duplex
router ospf 200
log-adjacency-changes
network 10.2.22.0 0.0.0.255 area 0
network 200.2.2.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.2.2.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
I have implemented multicast on the network in a hub and spoke topology. i have set up ospf routing protocol and broadcast all network and can successfully ping.
I am currently using VLC player as my media streaming server and client. i have set up rtp streaming from the HUb router using multicast ip 224.2.2.2 and unable to broadcast the multicast traffic across the spokes 1 and 2 PC's
I have never used vlc player never set up multicast network before and i am struggling with this and need help.
these are my router configs below
http://dl.dropbox.com/u/20145606/ip%20video%20config.txt
Message was edited by: Louis Ojuwu

I have edited the message and the configs and topology are visible above now. instead of the links i provided

Need help with Battlefield 3 using Geforce 560 TI Hawk

I've recently installed my new motherboard CPU ram and SSD to upgrade my old system. I started with a brand new install, installed ALL updates. so I decided to try running Battlefield 3 since my old system couldn't. It'll play for about 15 mins or so then I get a black screen, only way out is CTRL ALT DEL my way out, but I notice on the bottem it says Direct X error. My system isn't over heating and all other games run great. I do have LucidVM set to use the graphics card for battlefield 3. I don't know if maybe i need a bios update on my 560 Ti, I've updated the drivers from a clean install for nvidia and nothing seems to work. I even thought maybe it was the spare controller i had plugged in. nothing. Please respond as soon as you can. I hope i can get this resolved. I dont even play battlefield much but if this is happening with this game Im worried itll happen with others. Thanks

GPU1
Display device : MSI N560GTX-Ti Hawk (S) on GF114 GPU
Display driver : 320.18
BIOS : 70.24.21.00.00
GUID : VEN_10DE&DEV_1200&SUBSYS_26011462&REV_A1&BUS_1&DEV_0&FN_0
I finally got around to looking at afterburner to see what it says. is there any need for me to update the bios. any help would be grand

Need Help With Military DTD Using FrameMaker 8

Fellow Forum Members,
I hope someone out there with experience in using Department of Defense DTDs with FrameMaker can contribute to this thread.
Attached is the MIL STD 400051-2 DTD that needs to play with FrameMaker. Does anyone out there know where I could find FrameMaker templates already setup that comply and play with the MIL STD 400051-2 DTD standard? If the Department of Defense is freely distributing the MIL STD 400051-2 DTD, shouldn't somebody in the Department of Defense also be providing MIL STD 400051-2 FrameMaker Templates for free that are already setup? I would greatly appreciate if anyone out there could provide an online source where I could download MIL STD 400051-2 FrameMaker templates.
Lastly, can anyone out there clarify what the purpose of the entities are inside the "Charant" and "Boilerplate" folders? The Department of Defense does not provide a readme file that define what the "Charant" and "Boilerplate" folders are about.
Any info will be greatly appreciated. Thanks.

I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean

Need help with database migration using export/import

Hi,
I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
2) Will there be any data corruption while export.
3) Is export/import the only method of migration/upgradation.
Please help
Thanks.

I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean

I need help with one chapter of the Logic training series book...

I've been studying from the Apple Pro training series manual - Logic pro 9, Professional Audio Production. I'm keen to sit the exam asap, and move onto the next book in the series, but may need a little coaching on one chapter - namely Appendix A, 'Using External MIDI devices.' I've never used Logic in this way, and only have one MIDI piano to work with at home. Therefore recreating what is required in the chapter, and getting my head around the material is proving difficult. Therefore I have two questions - 1) Will this section be tested in the exam? And if so, 2) Is there anyone in the Berkshire / Surrey / West London area who could help me with a quick lesson? (I'd be prepared to pay, obviously) I've been using Logic for a number of years, so would prefer not to have to spend serious money on a full blown course.
I'm keen to sit the exam over half term if possibe - w/c 4th June 2012.
Thanks for your help.
Arron

Hi
Appendix A covers setting up Audio MIDI Setup for a "real" external Synth, and then getting Logic to create a track to send MIDi out to that Synth. Finally, you set up the Program names.
You should be able to go through the first part (and do it) providing you have some kind of MIDI Interface showing up in AMS. Create a "dummy" MIDI 'Synth' and cable it up.
Once done, this 'dummy' synth will appear in Logic's Library for External Instrument tracks. Without an real synth you will not be able to hear any results.
You could run through the process for setting up the program names, but without something actually attached, you will not be able to hear/see the changes.
You could run in 32bit mode and use the "Software" quicktime synth, or maybe sort something using an IAC bus, but frankly, that's more likely to confuse the **** out of you at this stage.
HTH
CCT

I need help with exporting project for the web

Probably something i am doing wron g but here are the problems. When I use Quicktime Converter, if I try to convert to a Quicktime movie or an MPEG-4 nothing happens and i get a 'File error;File Unknown message' when i try to convert to an AVI File, it works, but even though I have already rendered the project, it shows up with little flashes of blue that say 'unrendered'. and finally, when I try to make it a w
Windows Media File, it stops after 29 seconds. Any ideas?
I have an iMac with dual core processor, and FCE HD 3.5.1. I have my video files on an external drive.
iMac Mac OS X (10.4.10)

perform a search using the term export for web and it should throw up some ideas.
here's one for starters:
http://discussions.apple.com/thread.jspa?messageID=2309121&#2309121
If you're using flip4mac to convert to wmv, the trial stops at 30 seconds - you need at least wmvstudio to export to wmv:
http://www.flip4mac.com/wmv.htm

Need help with Image Gallery tutorial.

Hi all,
No response from Apex Listener Forum...moved here....
Apex Listener - 2.0.2.133.14.47
Apex - 4.2.2.00.11
When running Image Gallery application as per tutorial, page just show a blank screen with no image upload button.
Am using Firefox 22.0 and Chrome 28.0.1500.72.
Firebug does not display any script error.
Had recreated tutorial on apex.oracle.com with same result as above.
http://apex.oracle.com/pls/apex/f?p=4550:1:::::F4550_P1_COMPANY:HANAMIKE
Workspace: HANAMIKE
Username: [email protected]
Password: yesla
Using username= resteasy_admin, Password=resteasy_admin to run on apex.oracle.com.
Had modified tutorial JS below :
var workspace_path_prefix = 'resteasy'; => var workspace_path_prefix = 'hanamike';
Another odd problem was when trying out the RESTFUL service as per tutorial when clicking the 'TEST' button, encountered error 404.
Problem due to extra workspace name in URL as below:
http://apex.oracle.com/pls/apex/hanamike/hanamike/gallery/images/
Had to manually modify it to:
http://apex.oracle.com/pls/apex/hanamike/gallery/images/
Notice that the Listener version on apex.oracle.com is:
APEX_LISTENER_VERSION
2.0.3.165.10.09
Thanks in advance.
Zack
Message was edited by: Zack.L

Hi Zack,
Thanks for providing the login credentials to your workspace. I took a look at your RESTful Service and associated application, and noticed that there was something missing - the "Upload Image" button! So it looks like the 'Create the Gallery Application' section is missing a step to create a HTML region, with region template "Button Region without Title", and with its region source set to the following:
<a class="button" id="upload-btn">Upload Image</a>
You'll see in the JS that there's a reference to #upload-btn, but no such object existed on your page. I created a copy of your app, which includes this new HTML region, and you'll see that I've uploaded an image as a demo. I've contacted the APEX Listener team re the missing instruction, so that will hopefully be rectified in the next release. Apologies for the confusion, but hopefully you're back on track now. As for the behaviour you've noticed with the URL generated by the 'Test' utility, thanks for bringing this to our attention. I'll do some further investigation there, and log a bug if required.
Regards,
Hilary

Need help with Image refreshing using the 1408

Similar Messages

Maybe you are looking for