Need help with Replace Metadata then multiple Save script

I am attempting to create a javascript to run on a folder of PSDs. I need it to:
1. Replace image Metadata with an existing Metadata Template called "UsageTerms".
2. Play an existing Action "Prep_PrintRes". (The action sharpens and converts to 8-bit)
3. Append "_PrintRes" to the filename. (ie OriginalPSDName_PrintRes.jpg)
4. Save the file as a 12 Quality JPEG to specific folder on my hard drive, "D:/Transfer".
5. Play an existing Action "Prep_Magazine" (The action resizes, sharpens, and converts to CMYK)
6. Append "_Magazine" to the filename. (ie OriginalPSDName_Magazine.jpg)
7. Save the file as a 10 Quality JPEG WITH NO EMBEDDED PROFILE to "D:/Transfer".
8. Play an existing Action "Prep_Screen". (The action sizes, sharpens, and converts to sRGB)
9. Append "_ScreenRes" to the filename (ie OriginalPSDName_ScreenRes.jpg)
10. Save the file as an 8 Quality JPEG to "D:/Transfer"
If anyone is available to help me get started with this I would greatly appreciate it. I can do a minimal amount of Visual Basic but Javascript is alien to me. Thanks so much!

Try the following as the custom calculate script:
// Sum the field values, as numbers
var sum = +getField("LaborCost").value;
sum += +getField("MaterialCost").value;
sum += +getField("EquipmentCost").value;
// Set this field value
event.value = sum > 0 ? sum : 0;
For the other one, change the last line to:
event.value = sum < 0 ? sum : 0;

Similar Messages

  • I have a "Contact" organization issue I need help with.  I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

    I have a "Contact" organization issue I need help with.  I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them.  This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

    I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

  • Need help with simple Quicktime 8 Batch Save As Mov script

    I'm new with AppleScript and would like to create a simple script that will take MEPG, AVI, and other video files and wrap them as an MOV file. I thought I used to have a script that would allow me to drop multiple files or folders onto it and it would batch "save as" to the MOV container. Any help is appreciated!
    Thanks,
    Eric

    Hi,
    See these:
    http://stackoverflow.com/questions/11690142/how-to-call-a-vbscript-from-a-batch-file-without-opening-an-additional-command-p
    http://stackoverflow.com/questions/11899730/running-vbscript-from-batch-file
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • New and need help with replace harddrive M45-s265

    Hello,
    I am not sure were to post this had a hard time trying to find were to post this message.
    (I also upgraded to 2g memory with out a problem)
    I replaced the board and get a message as if it has none 
    part of message
    PXE-E61: Media test failure, check cable
    PXE-MOF: Exiting PXE ROM
    The new board is from newegg and is a western digital wd scorpio ATA 250 gb wd2500beve-00wzto, I was told this is what i needed. 
    The key in and pins are the same as old board.
    Thank you so much for any help I can get

    That's the correct drive.  What is your question?  To do the replacement, you flip the unit over, remove the hard drive cover, slip the drive out, remove the 'caddy' and put it on the new drive, slide the new drive back in, replace the cover and boot from your recovery disks to restore the original disk image.

  • Need help with Adobe documents - emailing multiple PDFs

    Can anyone out there help an old man? I'm new to all things Adobe but the only thing I can't seem to master is sending multiple PDFs in a single email, from Adobe documents. What am I missing here?

    Hi Craig,
    You can either Create a pdf portfolio of those files and send a single file to the user or you can select all the files you want to send at once while uploading and then send them in one go.
    Please revert back if you still face challenges in sending multiple pdf files at once.
    Regards,
    Rahul

  • Need help with replacement hard drive

    My hard drive has stopped working on this computer and since i only purchased it on 10/2012 I really don't want to replace it just yet.  I am trying to buy a new hard drive but I would like a Seagate.  I want to upgrade from  1 TB to 2TB.  I was wondering if there is a Seagate product out there that would be compatable with the original hard drive but in 2 TB.The original hard drive is a HDD GNRC 1 TB SATA 3 ECO 7200 rpm 3.5".  I was looking at a Seagate 2TB SATA 6.0 but I do not know is the SATA 6 will work with the original SATA 3.  Can you please help me or guide me in the right direction for a replacement.  I also have the HP recovery CD's coming to me in the mail.Thanks,GinaCee 

    Hi Big_Dave,Thank you for your help.  I found this hard drive at Newegg and I was hoping you could tell me if it would be compatable.Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive.   Or is there any Seagate product you could reccomend? I have a Seagate external hard drive and I like thier product, so I was hoping that they made something compatable for my HP.  I will be installing this drive myself.  I have all the instructions from the HP website and it doesn't look that difficult.  Just waiting for my restore CD's and a replacement hard drive so I can start this project.   Thanks again!Gina 

  • Need help with displaying content on multiple pages

    Hi I'm kind of a dreamweaver newbie and i'm a little in over
    my head. I'm trying to design a web site with the same content
    appearing on multiple pages. Here's the current site...
    http://home.comcast.net/~gascec/cecnh20/index.html
    I'm trying to establish the top bar and side bars of links
    and the logo on each page from one point so i don't have to change
    forty pages if i update a link.
    I know there's a way to do this and i thought it was using a
    CSS page but i can't figure it out and i'm running out of time.
    Help

    Got it. Thank you. I'm having one other problem though. I
    keep getting this bizare message every time i save or try to use
    the template:
    The is an error at line 41 column 7 (absolute position 2486)
    of "~pathandfilename.dwt": Nested editable regions
    The only thing at line 41 is the <body> tag. I took all
    the formating out to try to trim this out... any thoughts about
    this one.
    Thanks G

  • Beginner needs Help with Replace

    Post Author: SportzLuvr1979
    CA Forum: Formula
    When pulling data from the DB it returns #@# as listed in the DB.  I need to replace the #@# with a ; but do not see where in CR Reports 2008 i can do this replace function.  I attempted using the "Format Field" with the x-2 to open the "Format Formula Editor".  In the Crystal Syntax I entered the below. // Replace (inputString, "#@#", ";")However this didn't work.    When i refreshed the report it still returned the #@#.  Is there another way to perform this replace or convert?   Thanks!

    Post Author: yangster
    CA Forum: Formula
    you don't use the format field to change the field itself, the format field is a conditional to apply formatting to text itselfyou need to use the replace function within a formulasimply create a formula with your above formula and insert it into the detail section of your reportput it next to your actual input string and you'll be able to confirm that it is replacing the proper string with the string you wantthen remove the input string from your report layout and leave the formula

  • Need help with replacing hard drive please

    Can I upgrade to a hard drive that has SATA 3 interface with my Macbook Pro mid 2009 model?

    It may well work and be backward compatible as jk said, however your machine was spec'd for one type of drive. For me, even if the older technology for the same capacity was slightly more in cost, I'd want to put that in my machine rather than something that may not be fully compatible. Just my opinion.

  • I need help writing an if then statement Java Script.

    In the Text Field Properties box I see the Calculate tab where I think that the form can do a logic (IF/THEN) function if I can place the correct Java Script code into the form. Unfortunately; I do not know how to write in Java Script.
         - I have a form with a field identifier called BACompnayAddress (this is the field where they would enter their address).
         - I then have a form field with two radials that says "Is the shipping address the same as the business Address" - "Yes" and "No" (the form identified for the radials is SASame.
    What I am trying to accomplish:
         - If they click Yes, I would like the Shipping Address field (field identifiier ShippingAddressAddress) to fill in the information found in BACompanyAddress and if they click No leave the  field blank to be filled out by the person filling out the form.
    I appreciate any help.
    Thanks,
    Brett

    If that's what it does, that is exactly what you said it needs to do. You said niothing about what should cause it to go back to frame 1.  If you want it to go back to frame 1 with a ROLL_OUT event, then you would add a listener for that. If you want something else to trigger it to go back, then you just need to work that out.
    The only time I can see where an if/else would be needed is if you want it to change frames for every rollover such that if it is in frame 1, then go to frame 2, and vice versa the next time you rollover it.

  • Need help with looping/repeat webpage in Apple Script

    I would like to repeat an action in AppleScript by opening up a URL page in Safari, closing it, and then re-opening it again.
    Can someone please help me with this action? Please be very specific in your response. I am not very familiar with this program.
    Thank you

    tell application "Safari"
        repeat with theURL in theURLs
            make new document
            set URL of front document to theURL
            delay 1
            repeat until ((do JavaScript "document.readyState" in front document) is "complete")
                delay 1
            end repeat
            close front document
        end repeat
    end tell
    This is what I have so far..but it is not working. It only opens it up ONCE. What I want is for the web page to repeatedly be generating every 1 or 2 seconds, after it closes out the previous one.
    I want only ONE website continously being opened up.
    Someone help please!!

  • Need help with Signature on Checks using SAP SCRIPT

    Hi,
    I am looking for some help on how to get the Printer Resident Singature on to the Check using SAP Script. We have a HP Laser 8150 Priter in which the Chip Contains the Signature ( Printer Resident Singaure ) and currentlly the ORACLE application is able to print this signature on the checks. Right now we are in Migration to SAP and we are trying to get this Signature to print on the Check using SAP Script.
    Please help us.

    There are many ways to do this, the simplest way to print the signature is using HEX ENDHEX command.
    1. Print the Printer font list from the printer configuration menu, Find the signature in the font list, next to it there'll be esacape sequence in ASCII and Hex format.
    2. Add the following command in the window of the signature:
    /: HEX TYPE PCL
    /= Enter the Hex escape sequence(begins with 1B) from first step
    /: ENDHEX
    Regards
    Sridhar

  • I would need help with the following please: I need to save some of my email on a disk. I was going to Print, then Save PDF but then I am stuck. Help please. Thanks. Elisabeth

    I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
    Thanks.
    Elisabeth

    Open the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.

  • I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

    I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

    Hi,
    iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
    However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
    In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
    AN @mac.com name can be used on any version of iChat  (Until the 30th June 2014)
    As it does not need a double check with Apple you can use it to log in to the AIM Web pages
    Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
    Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
    About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
    If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
    In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
    Select the Library that appears in the menu list.
    Navigate to Preferences.
    (If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
    Fnd com.apple.ichat.aim.plist (even if you are using Messages)
    Drag the file to the Trash and Restart the app.
    7:39 pm      Thursday; May 29, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Purchased extreme to replace modem/router DSL used telephone cord need help with set up

    Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
    Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
    How do I get extreme to work as the modem and router ?

    How do I get extreme to work as the modem and router ?
    you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

Maybe you are looking for

  • Replacement LCD Displays

    Hi, Folks--I'm new to this forum so please forgive me if I'm asking something that has been asked recently. I have a 23" Cinema Display (the older one, model # M8536) that needs a new LCD display unit (the old screen is cracked). Is there any place w

  • BI content - Error on activate 0DB IOBJ

    Hello, I'd try to activate IOBJ in BC, but all of them that need 0DB (Dun & Bradstreet) has problems in activation like that (like a sample of errors). I opened an incident to SAP Support, but unitl now I don't have any answer. Object '0DB87SIC1' (IO

  • Simple Question: Carriage Return in description field

    Hi, i need to know how to insert a carriage return in my description field. Its a string field and I use the following code: rpt.DataDefinition.FormulaFields["BSpalte"j].Text ="\""bperiod((char)13)"Durchschnitt"bsperiod"\"" ; It compiles and the code

  • Camcorders/Video Cameras recommendationsfpr FCP or FCE

    I wish to buy my daughter a Camcorder/Video Camera suitable for use with Final Cut Pro/Final Cut Express. She is doing Film Studies A level at the present, and her school uses FC Express. The Uni she wants to do Film Studies at, uses FC Pro. She is a

  • Shopping Chart POPUP

    Dear experts, We are using SRM 5.00 and CCM 2.00. On shopping process , search in cataloge >chose an item> add to SC , the Internet explorer 8 opens a new POPUP screen with the SC details. Can we prevent this functionality , and get the data into the