Need Information on Discoverer Un-Scheduled Reports

Hi All,
I don't find any link for the Discoverer section in Developer Tools, thats the reason I'm posting this thread under Reports Section.
My question here is, there are EUL tables which gives the detail information like last_run_date etc.. for the scheduled discoverer reports.
But I need the same information for the un-schedule reports, but I don't find any tables when a report ran last time.
Can any of you guys help me out from this issue.
Thanks in Advance.
Raja.

Hello,
You can find a list of all the OTN Forums here : http://forums.oracle.com/forums/main.jspa?categoryID=84
Discoverer Forum : Discoverer
Regards

Similar Messages

  • Urgent Help Needed in scheduling reports from BI Publisher

    Hi,
    I have configure the scheduler service on my windows server. Now i am trying to schedule a report from BI pubisher. But it is not working. When i click submit button, It is not doing anything. It seems it adds entry in the job schedule table. Even when i click schedules link, it shows just show progress status on explorer status bar but nothing happens.
    Any help would be on this would be highly appretiated.
    Thanks,
    Prasad

    Have you actually checked the scheduler tab to see what the report did? BI Publisher will not just tell you if a job fails unless you have your email server configured then you tell it to email you if the job fails. Also, be patient because it can take up to 5 or 10 minutes for a report to completely run for a 40000 row dataset. If you check the scheduler tab and the job failed, check your RTF Template. I have discovered through trial and error that BIP is picky about how you do your tags, especially loop tags. These would allow you to view the report online but cause BIP scheduled reports to fail on the report. Other than that, have you installed the scheduler database and tied it in? BIP has its own database schema you have to install somewhere on an database server that it stores scheduling information in.
    I hope this helps.

  • I need information about reports

    hi gurus,
      i need information about Trending reports and Management reports. Can any body provide me the scenario regarding this issues:

    Hi
    Trend reports are the reports which show a certain trend all over the years
    Say, Sales revenue for the year compared to all the previous years...This show what is the trend in the last few years
    Management reports high level reports with summarized data which helps in decision making. Say, Vendor performance report...this report shows list of default vendors by ranking them and management can decide to continue or not to continue with certain vendors
    Regards
    N Ganesh

  • Need a way to Hide the Destinations (FTP, Email...) when scheduling reports

    We do not have destinations set up for FTP, email and unmanaged disk in our environment due to our stringent security requirements.  Even after being told these are not available, our users continue to try to schedule the report to go to these destinations and they are causing the reports to fail and utilize database resources for a report that will not complete successfully.
    Does anyone know if there is a way to hide the destinations from users when they schedule reports?  I know this was an option a couple of versions back but I cannot find it in BOE XI3.1 SP3.  The only option we want our users to see is Inbox and their personal folders.
    Our environment is:
    Windows Server 2003 SP2
    Tomcat 5.5.30
    Java 1.6
    BOE XI 3.1 SP3 FP3.2
    Thanks.
    Rich

    Hi,
    We can control distinations by configuring them on Respective Servers, which should be protected from business users.
    Assuming that you wish to configure only email as destination for Crystal Reports,  then
    Step 1 : Access properties of Server-> CrystalReportsJobServer
    Step 2 : Choose only valid Desitnations that you wish to provide, In our case it is only eMail
    Always go for cloning existing server if you are customization. Which is good practice than directly working on default server.
    HTH
    B Ravi Shankar

  • Querying the output of a batch/scheduled report

    We haven't move to Discoverer Viewer as of now. One of the questions I have to those who have already implemented it is, can you schedule a batch report in the viewer and then users are able to query the RESULT of it without querying back the database? We have concerns on performance during the day so scheduling reports to run at night would be convenient for us.
    thanks for any comments........

    In the concurrent program screen, select options . Under Notify the following person, eneter the email address where output needs to be sent.
    Other option could be to create a send mail package and call that from after report trigger of report. The email address can be inputed as a parameter. For more information for this visit
    http://sureshvaishya.blogspot.com/2008/02/email-through-plsql.html
    The third option could be to call the report from a shell script program and after report is completed email the output using mailx functionality.

  • Scheduled report with sub-reports  (Encapsulating page failed).

    Hello Everyone
    I am fairly new to reporting and SAP.
    I do have a main schedule report containing 4 sub-reports in the sections and 1 sub-report in the page header.
    The report runs fine in the Infoview development folder, But whenever its deployed in system_testing folder, it doesn't open and gives the following error:
    "ERROR IN FILE XXX:Encapsulating page failed."
    I talked to DBA to change the permission for the user, but they don't agree. since its a scheduled report, user can only access the instance of the report, not to run it.
    How can I make sure that the sub-reports don't run when user opens the report.
    I appreciate any help in advance
    Thanks and regards
    MJ

    Hi All,
    We have been facing the "Encapsulating page failed " error sporadic in our Crystal reports. It is not happening always.
    We have tried with different user accounts, it did not help much. Also tried various suggestion from the following SAP Notes:
    1536964 - Encapsulating page failed - The error change to Database error when the preference is changes
    1211088 - Error message "Encapsulating Page Failed" - This is not the case with our reports, we still have some reports facing the same error without an subreports in it
    1543412 - Infoview warning: "Error in File xxx : Encapsulating page failed - tried implementing the recommendation , but no help
    1900672 - Error: Encapsulating page failed while viewing Crystal Reports based on stored procedures in BOXI 3.1  -- Our reports are not based on stored procedures.
    We have faced this error in many different version of BOXI 3.1 like SP4.1, SP7.1, SP7.2. But the behaviour is similar. We have a clustered machine with 2 BOE servers and 2 Tomcat servers.
    I have tried activating E2E tracing, but I really couldn't understand the reason for error from the logs. Our reports connect to datasource using webservices.
    some information from the error traces.
    Verkapseln der Seite nicht möglich.. Internal error: CrpeMgrPEEncapsulatePageEx
    I would like someone to help me troubleshoot the problem. I can share the logs if needed. Please direct me to the correct forum if this is outdated.
    Regards,
    Prarthana

  • Scheduled report issue

    Hi,
    I scheduled a work book with multiple worksheets in discoverer 4.1.47. After scheduling when am I opening, I found there is a sheet with no data. I checked the query from SQL inspector and its not showing the original query and its showing the below query . I normally opened the worksheet from discoverer desktop and its showing the query correctly, where as in scheduled report SQL inspector is showing the below..
    Remaing all sheets are scheduled correctly.
    Please let me know, why
    SELECT BRVC2 as E_300, BRVC1 as E_308, BRVC3 as E214082, BRN1 as E214083, BRN2 as E214094, BRN3 as E214095, BRVC4 as E214097, BRVC5 as E214098, BRN4 as E214099, BRVC6 as E214100, BRVC7 as E214101, BRVC8 as E214103, BRVC9 as E214106, BRVC10 as E214107, BRVC11 as E214109, BRN5 as E214110, BRVC12 as E214111, BRN6 as E214112, BRN7 as E214114, BRVC13 as E214115, BRVC14 as E214116, BRD1 as E214127, BRVC15 as E214130, BRVC16 as E214131, BRVC17 as E214144, BRVC18 as E214146, BRVC19 as E215360 FROM APPS.EUL4_B100714054016Q2R1;
    BR
    Uma

    Hi Uma
    In standard Discoverer, when you create and run a worksheet the results are created dynamically. This means that the data is only available within the session that is running the worksheet. More importantly, the data is NOT available to any other worksheet whether within that session or not. However, if you use a scheduled workbook then the results from the worksheet are held in a temporary table until you remove the results or you delete the scheduled workbook.
    Tables look like this: EUL5_B060914015847Q1R1
    Views look like this: EUL5_B060914015847Q1V1
    Note: these temporary tables are stored within the schema of the user who owns the workbook - not within the standard EUL schema. The format of the table is as follows:
    EUL5_B060914015847Q1R1 which can be broken into six separate pieces.
    These pieces are as follows:
    EUL5_ B YYMMDD HHMISS Q9 R9, where
    EUL5_ is a fixed name
    B means Batch and is a constant
    YYMMDD is the date that the worksheet was run,
    HHMISS is the time when the worksheet was run, the time is in the 24 hour clock format,
    Q9 means this is the letter Q followed by a number - E.g. Q1, which signifies the query number. I believe Oracle have some plans to allow multiple queries but for now this is always Q1,
    R9 means this is the letter R followed by a number - E.g. R1, R2 and so on. This is the run number.
    Using the above logic therefore, here is your example: APPS.EUL4_B100714054016Q2R1
    This means this is result set number 1 for query 2, run at 5:50:16 AM on 14th July 2010.
    So if you can figure out which worksheet was scheduled and when it was run you can build a view that sits on top of the latest table to give you the latest results. Something else which adds interest here is that the column names within the table do not match the column names as in your original query. The scheduled results column names use generic names such as BRVC1, BRVC2, BRD1, BRD2, BRN1 and BRN2.
    These are codes and can be interpreted as follows:
    BRCV1 and BRCV2 mean Batch Result Varchar (aka string) 1 and 2,
    BRD1 and BED2 mean Batch Result Date 1 and 2,
    BRN1 and BEN2 mean Batch Result Number 1 and 2
    In SQL, try this: SELECT * FROM APPS.EUL4_B100714054016Q2R1 - do you see anything? If yes, there is data in the result set. If no, this means Discoverer found no data when it ran the scheduled workbook.
    If you have no data in the results you have to determine why. Perhaps you are pulling from a secure view using a specific responsibility that was needed get at the data? A responsibility that would be needed during the scheduled run.
    Hopefully this helps
    Best wishes
    Michael

  • Strange error while scheduling but can see the scheduled report

    Hi,
      When I schedule a Deski Report from my Favorite folder to my repository folder the instance fails and has this error message
    destination DLL disabled. []: [CrystalEnterprise.Smtp] .
    But when I see inbox I can see the report scheduled in required format.
    For information - I m using XIR3.1 SP2 and using a server group for scheduling this.
    Please help me identifying why the schedule fails.

    Hi,
         Please note, the error occurred when system tryng to push your completed scheduled report into a particular destination. In you case, the Repository Folder Path.
         Regardless, the solution provided by the previous post contained the same solutions you need to apply.
         In summary, you need to make sure you have permission to that particular path where the report will eventually reside.
    Regards,
    Ken

  • How to change the sender's name/email-id in the scheduled report

    Hi,
    We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out of the
    team.
    I tried to change but could not find the option to change while editing the properties in SCOM Console under Reporting -> Scheduled Reports.
    When we are receiving mail from that scheduled report, instead of an individual name, would like to provide a generic name. Please help me out. Let me know, if you need more information.
    Thanks,
    Naren.
    Thanks & regards, Naren.

    Hello,
    the SCOM scheduled reports feature rely on SQL Reporting Services. So, if you would like to change the SMTP configuration, you should go in SQL Reporting Services Configuration Manager:
    Open in the Start Menu, Reporting Services Configuration Manager.
    In the connection window, click OK.
    Click on the tab E-mail settings.
    Change the Sender Address.
    Click Apply.
    Alternatively, you could also change in the Scheduled report properties the field
    Reply to. I think it should customize the reply address for each scheduled reports, but I have never used it. Anyway, doing it with Reporting Services Configuration Manager is more interesting in the long-run.

  • Identify the user of the scheduled report

    Hi we are using Oracle Discoverer (9.0.4) .
    i have a question on this . we have identified a scheduled report which was still running for the last 2 days . i want to track the report name and the owner of the report . is there a way to identify this scenario?
    please let me know
    Kanna

    Hi,
    the below will get you all scheduled workbooks currently active, i hope this is what you need.
    if you are using database users for the discoverer you can use:
    SELECT Bat.Br_Name
    ,Doc.Doc_Name
    ,Doc.Doc_Created_By
    FROM Eul10g_Us.Eul5_Batch_Reports Bat
    ,Eul10g_Us.Eul5_Documents Doc
    WHERE Bat.Br_Workbook_Name = Doc.Doc_Name AND
    Doc.Doc_Batch = 0;
    If you use APPS mode then use this one.
    SELECT Bat.Br_Name
    ,Doc.Doc_Name
    ,Fu.User_Name
    FROM Eul10g_Us.Eul5_Batch_Reports Bat
    ,Eul10g_Us.Eul5_Documents Doc
    ,Fnd_User Fu
    WHERE Bat.Br_Workbook_Name = Doc.Doc_Name AND
    Doc.Doc_Batch = 0 AND
    Fu.User_Id = CASE WHEN Substr(Doc.Doc_Created_By
    ,0
    ,1) = '#' THEN Substr(Doc.Doc_Created_By, 2, 10) ELSE Doc.Doc_Created_By END;
    Tamir

  • Crystal Report Server - Scheduled Reports Have Failed - SMTP_E_TCPSOCKET_SE

    Hi,
    Recently, several scheduled reports have failed with the error message "server error. CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_SEND(3)". It happens randomly, to different reports at different times. Can anyone let me know what information does this need to troubleshoot. Thanks!
    Senthil

    Hi
    I would like to suggest you following things:
    1) Please check the SMTP settings on the respective report's job server. Like Severname of the SMTP
    server. Port number of the SMTP and domain.
    2) Check whether are you able to send the mails from mail client to the desired destination.
    3) Verify the Port number given to the SMTP, by default it is 25. And also verify it is not blocked on the
    firewall.
    4) Also verify whether ip address of the server machine where job server is installed is included in the
    allowed list at the SMTP server end.
    Regards,
    Hrishikesh

  • Crystal Report Server - Schedule reports have failed.

    Hi,
    Recently, several scheduled reports have failed with the error message "server error. CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_SEND(3)". It happens randomly, to different reports at different times. Can anyone let me know what information does this need to troubleshoot. Thanks!
    Senthil

    Hello Senthil,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Differentiate between report and generated scheduled report - report list

    How do I differentiate between a (.rpt) report and a (scheduled generated report) from this report (.rpt with data) when I list all the reports on the server.
    I need this information because when I view the scheduled report, I do not need to set the parameters via the crystal viewer.
    Thanks in advance.
    JM

    Ted.
    I am not sure why the scheduled report is saying si_instance=false.
    So I scheduled the sample report - Drilldown and named the scheduled instance as "DrilldownInstance",
    it created two info objects. One has SI_INSTANCE = true and the other has SI_INSTANCE = false!!!!!
    select * from CI_INFOOBJECTS
    where
    SI_PROGID = 'CrystalEnterprise.Report'
    and SI_KIND = 'CrystalReport'
    and si_name LIKE '%DrilldownInstance%'
    I presume it should have only created one object, and set si_instance=true
    Thanks,
    JM
    P.S
    Sorry to be a bother! but this is driving me nuts!
    Edited by: jam mend on Jan 20, 2009 9:07 PM

  • Need information-BW System administration-process chains

    Hi gurus,
    I need information about BW System administration-process chains
    can anyone send me the docs related to
    1)process chain modellin aspects
    2)process chain monitoring &error handling
    3)BW statistics and query tuning with aggregates
    Thanks in advance..
    regards
    s ram

    Hi,
    Check these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
    Process Chain
    process chain
    BW STATISTICS  
    If you are asking abt the flags that you see in RSA1 -> Tools -> BW Stats...you can check BW Stats for each and every infoprovider. Whenever you create an infopprovider you should always decide whether you want to turn on the BW Stats for this infoprovider. This is a manual step and can be done in each and every box individually or can be transported across the systems. Coming to your question...BW Stats are of two kinds...
    1) OLAP -
    If you check this flag for an infoprovider...all the statistical data for the queries built on this infoprovider gets updated into the corresponding infocubes (0BWTC_C02 and 0BWTC_C03). An example would be like number of users that ran the report in a given time, the average run time of the query and so on. This data is of immense value in deciding the steps for performance tuning techniques like aggregates!
    2) WHM (Warehouse Management) -
    If you turn this flag on for an infoprovider, all the statistical data like how often the cubes are loaded, when are the requests deleted from the infocubes, data abt condensing of cubes and so on is loaded into the corresponding cubes like 0BWTC_C04, 0BWTC_C05, 0BWTC_C09 and 0BWTC_C11.
    You have to activate the infopackages to load into these cubes and schedule them through process chain to run once in a while so that your statistical data is uptodate.
    Production support for maintaining the process chains primarily involves monitoring activities of all the chains that are running in the background...
    Errors in monitoring of process chains can be categorized into 4 different sections...
    Master data - Full Update
    Master data - Delta Update
    Transaction data - Full Update
    Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
    Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
    There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
    In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
    For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
    Majority of the issues will be based on these things only..
    ****Assign Points If Helpful****
    Regards,
    Ravikanth
    Message was edited by:
            RK.PNV

  • Select information about programs of sceduled report sets

    Hi,
    We would like to get information about all scheduled Report Sets in our production system.
    We need names of each 'Report Set', when it's report set - each program under it, and parameters passed for all Report Sets that were scheduled.
    For Report set we need to know schedule too.
    We use Oracle Apps 11.5.10.2
    Could someone help me?
    Thanks,
    Alex

    Hi Alex,
    In this case, you will have to include FND_RUN_REQUESTS tables (and other tables if required -- see eTRM for details) to those queries. I do not have a ready query to share, but I think with the help of the documents referenced above you can write this query.
    Regards,
    Hussein

Maybe you are looking for