Identify the user of the scheduled report

Hi we are using Oracle Discoverer (9.0.4) .
i have a question on this . we have identified a scheduled report which was still running for the last 2 days . i want to track the report name and the owner of the report . is there a way to identify this scenario?
please let me know
Kanna

Hi,
the below will get you all scheduled workbooks currently active, i hope this is what you need.
if you are using database users for the discoverer you can use:
SELECT Bat.Br_Name
,Doc.Doc_Name
,Doc.Doc_Created_By
FROM Eul10g_Us.Eul5_Batch_Reports Bat
,Eul10g_Us.Eul5_Documents Doc
WHERE Bat.Br_Workbook_Name = Doc.Doc_Name AND
Doc.Doc_Batch = 0;
If you use APPS mode then use this one.
SELECT Bat.Br_Name
,Doc.Doc_Name
,Fu.User_Name
FROM Eul10g_Us.Eul5_Batch_Reports Bat
,Eul10g_Us.Eul5_Documents Doc
,Fnd_User Fu
WHERE Bat.Br_Workbook_Name = Doc.Doc_Name AND
Doc.Doc_Batch = 0 AND
Fu.User_Id = CASE WHEN Substr(Doc.Doc_Created_By
,0
,1) = '#' THEN Substr(Doc.Doc_Created_By, 2, 10) ELSE Doc.Doc_Created_By END;
Tamir

Similar Messages

To identify the user running the job at runtime

Hi All,
My requirement is to develop a program which need to send mail only if a particular user runs the job.
I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime.
Please suggest me the possible ways of identifying the user running the job at runtime.
Thanks in advance!!!
Regards,
Dinesh.

"I need to read the user who runs the job at runtime, i tried with SY-UNAME but it holds the user name of the person who created the job at runtime."
This is not true if your program/form/method is called inside the ABAP report which is executing in the batch job step. There, the active SY-UNAME is the user entered in SM36 as the job step user. It is not the user who planned/scheduled the job.
It is unclear from your description where your program is actually running. Is it another (ABAP) step belonging to the same job or is it actually some routine called within the same job step that you are checking or is it a program totally unrelated to the batch job in question (in that case, check out the other answers about TBTCO/TBTCP)
- Alex

How to find out the user from the Jobs queue in Report server

Hello All!
I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
Regards
Shobha

hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM

Sending an email to the user if the WEBi scheduling failed in CMC

Hello Everyone,
Current scenario :
I am scheduling WEBi report through CMC and the report is going to end user email as an excel attachment.
Desired Functionality :
What happens is if the scheduling fails due to some reason. The email does not go to the end user on a particular date and then he complaints.
What i need here an email sending option that if the WEBi scheduling has been failed in CMC an email should go to the user saying : " The WEBi scheduling has failed. The team is working on it " . (This is just a sample message)
So the idea is to send an email to the user when the WEBi scheduling fails in the CMC. How to achieve this ?
Regards,
Ashutosh Singh

Hi Ashutosh,
You can send an alert email to a group when the schedule fails to run by choosing the "A job has failed to run" option under notification.
You can see this option only if you schedule the report through CMC.
Regards
Sunil

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

How can I make a survey automatically identify the user in the results?

How can I make a survey automatically identify the user in the results (so that it won't be anonymous)?

I am not sure what information to provide. Here is what I am trying to do. I am trying to create an HR questionnaire with multiple choice questions and several multiline textboxes to capture comments. I want to send it out by email address and/or embed the questionnaire somewhere on the company's intranet website. But we don't want the questionnaire to be anonymous. If someone makes a particular comment, we want to be able to communicate with the person who made that particular comment. How would we be able to trace the person? By email address, or by user ID?

Getting the role of the user running the report?

Hello,
I'm doing a report with Answers and need to recover the role of the user running the report. Is it possible?
Thanks

You can use any of the below Session Variables, click the Fx and enter the below
VALUEOF(NQ_SESSION.displayname) - Displays the Full Name of the User that is logged in and running the report for that session
VALUEOF(NQ_SESSION.user_alias) - Display's Alias Name of the User that is logged in and running the report for that session
For the role, I don't think there is a Session Variable.
Cheers!
Royston
Edited by: Royston Goveia on May 24, 2012 12:50 AM

Is there a way to automatically add a page to my current form when the user marks the check box?

I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
Thanks,

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

"File Dialog" Express VI returns the wrong path when the user selects the desktop

In labview 8.0.1 with Windows
XP, the File Dialog Express VI seems to return something other than the path
selected by the user when configured to browse for folders (or files and
folders) and the user selects the desktop.
I can't determine exactly when it works and when it fails, but it always seems
to fail if the user selects the desktop from the places bar (the shortcuts on
the left side of the dialog) or from the drop-down menu at the top of the
dialog and then clicks the "Current Folder" button to dismiss the
dialog. In this case it always returns whatever path is wired to the
"Start Path" terminal.
If the user navigates to the desktop with the "Up One Level" button
or by selecting the actual desktop directory under Documents and Settings, the
correct path is returned.
If the user selects a file before clicking the desktop icon, then clicks
"Current Folder" the correct path is returned.
If the user clicks the desktop icon, clicks open, then clicks "Current
Folder" the correct path is returned.
It's possible to work around this bug in most cases by setting the start path
to the desktop.
Has anyone seen this behavior before?
Can anybody verify this behavior by running the attached VI?
In the past, when I've reported issues like this I've received responses from
NI engineers that basically said "Thanks, but we already knew
that". Is there anywhere that users can search the list of known
bugs and avoid wasting time tracking down issues that are already understood by
NI?
Thanks,
Adam Brewster
Attachments:
File Dialog Test.vi ‏39 KB

I'm on 8.2 and I can't get it to fail no matter how I select the desktop. I haven't tried it in 8.0, but I imagine that if this really is a bug, they did know about it and fixed it with 8.2. If this causes a real problem for you, I would suggest upgrading if you can.

Time Spent by the user in the system and No. of transactions executed

Hi,
Can anyone tell, if there exists any tranaction/report to get the details of the Time Spent by the User in the system and No. of transasction run by User in a given period of time?
If I get the names of tables where SAP stores this information in, then that also will be helpful.
Thank you!!!

Hello Pranali,
the time spent by a user (which is the difference between login and logout) is <b>not</b> stored anywhere.
STAD and/or ST03 will not help here as only the time of the login could be determined from the workload statistics. The time of the logout cannot be retrieved from the workload data (as this action doesn't contain any "logout specific" information).
As a workaround you can use the Security Audit Log (sm19) to protocol the logon and logoff of the users. Based on this information you should be able to calculate the time a user was logged on.
About the number of transactions:
the workload analysis only uses dialog steps. As the number how often a transaction was called doesn't contain any useful information this information is <b>not</b> collected.
E.g. you can call su01 to create 100 user accounts or call ten times su01 to create one user. The workload creating 100 users will be higher than the workload of the remaining ten transactions...
So the figures 1 transaction vs. 10 transactions doesn't provide any useful information.
Regards, Michael

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How to get personnel number of the user in the wd java code in Leave reques

Hi all,
we are using the standard Leave Request Applicatin ESS.
can any one please tell me how to get the personnel number of the user in the WD java code?
cause i have pass the pernr number to a bapi and get the details.
please help me its urgent.
thanks in advance.

Hi Madhu,
Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
If you hav any doubt, please let me know.
Regards,
Jithin

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online   Right now there is no app store for

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online
Right now there is no app store for Filemaker Go.   Filemaker Forgot about us.
So I want to create a simple native iPhone App that all it does
is launch
fmp://~/filename.fmp12?$VariableName=value
This URL will launch the Filemaker Go App
Filemaker Go is a app that the user will have to have
downloaded already on the device..
The Simple Native app will launch the Filemaker Go.
The fmp URL has the information where the Filemaker Pro database is hosted
and get the user where they need to be..
Help Me please
iPhone 5s, iOS 8.1.3

That would be software. And, you said "upload." That's "uploading software." Why do you question what you stated?
I don't know where you even want to upload this software. The only way it can be downloaded to a device is through the iTunes store. Do you even know what you want to do?

Return the User to the Calling Page - doesn't work

Hello All,
I set up the "Issue tracker" tutorial to get in tuch with the apex (htmldb vers. 2.0)
All is working well but: Return the User to the Calling Page -> doesn't work. I performed all steps as descriped in the tutorial (iclusive the '.' on the &P7_PREV_PAGE ;-) ).
I use my own aplication at home and followed all the instruction steps few times but it does not work. Can you help me please?
Do I have to install something more?
In the Branch section: * 1: Go To Page &P7_PREV_PAGE. (Unconditional)
In the Item section: 90: P7_PREV_PAGE Hidden
In the Button section for cancel Button: &P7_PREV_PAGE.
Here is the description of the function in the tutorial:
Because this Create/Edit page will be called from several places, when users finish with the display they should return to the calling page. To accomplish this, you create an item and change the branch on this page. Every time this page is called, the item must be set with the number of the calling page.
To create a hidden item:
1. Under Items, click the Create icon.
2. For Select Item Type, select Hidden and click Next.
3. For Display Position and Name:
1. For Item Name, enter:
P7_PREV_PAGE
2. For Region, select Issue Identification.
3. Click Next.
4.
Click Create Item.
Next, edit the Cancel button.
5. Under Buttons, select Cancel.
6. Scroll down to Optional URL Redirect.
7. In Page, enter:
&P7_PREV_PAGE.
Note the period at the end.
8. Click Apply Changes.
Next, edit the branch.
9. Under Action, enter the following in Page:
&P7_PREV_PAGE.
10. Click Apply Changes.
All steps are done but I still got the message: Error ERR-1016 Application "106" Page "0" not found (requested language="de")
OK
I move the mousepointer over the cancel button: javascript:redirect('f?p=106:0:5265993428922076876::NO:::')
Thank you for helping me!
best regards Thorsten

All,
I haven't looked at that tutorial for quite a while but just gave it a quick look.
Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
-- Sharon

The user and the mailbox are in different Active Directory Sites

Hi All,
I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
to create extest user.
Then I try to execute command to test-connectivity, but it failed.
Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
AuthenticationMethod :
MailboxServer : CONMBX02.contoso.com
LocalSite : CONMBX02.contoso.com
SecureAccess : False
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : DRCCAS01
LocalSiteShortName : CONMBX02
ClientAccessServer : DRCCAS01.contoso.com
Scenario : Reset Credentials
ScenarioDescription : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
MBX02.contoso.com.
PerformanceCounterName :
Result : Failure
Error : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
t_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
different Active Directory sites..
UserName : extest_xxxxxxxx
StartTime : 04/01/2012 20:46:19
LaCONcy : 00:00:00.0156460
EventType : Error
LaCONcyInMillisecondsString :
Identity :
IsValid : True
WARNING: No Client Access servers were tested.
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
Events : {Source: MSExchange Monitoring OWAConnectivity Internal
Id: 1005
Type: Error
Message: Couldn't access one or more test mailboxes.
The service that is being tested will not run against these mailboxes.
Detailed information:
Local Site:DRCProduction
[Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
t Active Directory sites..
PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
Counter: Logon LaCONcy
Instance: DRCCAS01.contoso.com|DRCProduction
Value: -1000}
any help appreciate it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Hi
   Removed existing test account on two site.
   Then created test account on DGC through new-TestCasConnectivityUser.ps1.
   Flushed Health Service on RMS.
Terence Yu
TechNet Community Support
Hi
What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Identify the user of the scheduled report

Similar Messages

Maybe you are looking for