Need installation help

Hey guys, I 'be been using arch for a while now but I crashed my computer. This time when I ran the install I wanted to dual boot so I installed windows first. Then when I ran arch and I typed
Mkfs.ext4 /Dev/sda1
It returned me an error when it was writing a super block it said that it had an ata bus error. I knew that that was weird so I deleted windows. Now it continues to give me more and more errors like this whoever I install. I hate windows now, please, please help me!!!!

Do you have anything on the drive which you need? If so, back it up immediately if you can.
Did you mean that you typed
mkfs.ext4 /dev/sda1
? That's not what you said but it seems somewhat more plausible.
Only troubleshoot the drive if you have everything off it that you need.

Similar Messages

URGENT! NEED INSTALLATION HELP!

Hi, so I decided to burn lion to a disk because I wanted to a fresh install on my iMac (Fall 2008). I followed an online tutorial by a well known tech reviewer to burn it to disk but I'm having trouble upon installation.
After it boots to disk and and I erase the hard drive I click continue and what not but after the blue loading bar gets to 75% of the way through "Downloading additional components. Your computer will restart automatically" the time just starts to increase and it never completes "downloading"!
The time is now at 45 mins and I have a very good wireless network, so it should be downloading fine but there seems to be no progress ):
Thanks for any help.

Cool.
Yeh, the blue progress bar is just about where it normal freezes. The time is 12 minutes remaining to download but I'm worried that's when it hits 10 minutes it's gonna happen again ):
I really need this to work because ive got assignments due within the next few days /:

Adobe photoshop Premiere Elements 13 - Need Installation Help

I just purchased Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 for Windows. I have a Windows 8.1 operating system. The file downloaded, it shows it as a 7Z file, which I can't open. Can anyone offer suggestions on how to open this file or how to correctly download the software?

steve AAaaa
From where are you downloading your Adobe Photoshop Elements Premiere Elements purchased software - Adobe direct?
For Adobe direct...
At this time, what do you have on your desktop - two files appropriate for your computer operating system, those being, .exe (which will be the Adobe Application Manager) and the 7z which is the program itself. That is all you should need? Based on my experiences, it is the .exe that does the unpacking of the 7z.
If you are having problems with the Adobe direct route, then download and install the tryout from the following web site and insert your purchased serial number in those installation files at installation.
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
Run and carryout the web site's "Note: Very Important Instructions" in order to avoid an Access Denied message.
For Windows, there will be File 1 first (exe) and next File 2 (7z).
Please let me know if you are OK with the instructions.
Thanks.
ATR

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

I need your help(sap installation error : CJS-30022)

Hello My friends,
I meet so difficult problems.
- SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Developer Edition
- SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition
In setting up above two version, it was interrupted on the menu during the installation.
I want to solve this problem.
To request help to solve this problem.
I searched "google" and " sdn.sap.com" but I didn't solve.
I installed the hardware OS xp 32bit cpu 2.4 ram 1 gb hdd 160 gb With OS windows7 64bit cpu 2.0 ram 3 gb hdd 80 gb ---
I installed as follows order
1.os xp pro, windows7 installation.
2.installing iis
3.As hdwwiz.exe MS Loopback Adapter network / ip: 10.10.0.10, 255.255.255.0
4.c: \ windows \ system32 \ drive \ etc \ host add to the 10.10.0.10 netweaver
5.The latest version of jre, java.com download at the click of a button installed in    path: JAVA_HOME setting
6.Computer swap size: 4096 - 4096
7. Turn off the firewall settings
The default setting is
run
D:\Setup\SAPNW7.01ABAPTrial.part1\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver701SR1_2008_Installation_Master\IM_WINDOWS_I386
\sapinst.exe
should install, run
During the installation, it is interrupted from "Import abap menu".
I need your help.
--------- error log ---------
WARNING    2012-07-13 17:13:12.859
           CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\Java\j2re1.4.2_19\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 2. Output:
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
Required system resources are missing or not available:
Import directory 'C:\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not have valid structure of subdirectories;
Import directory 'C:\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not have valid structure of subdirectories.
ERROR      2012-07-13 17:13:12.859
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR      2012-07-13 17:13:12.875 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO       2012-07-13 17:13:13.562 [synxcpath.cpp:815]
           CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING    2012-07-13 17:13:15.0 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2012-07-13 17:13:15.0 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .

Hello,
Which system are you getting the error, XP / Win 7 ?
Please find the minimum H/W requirement (Source Inst Guide)
Minimum RAM :- 4GB
Paging file size :- 1 times RAM plus 8 GB
If you are trying for win 7, then I would recommend you to
increase the swap space and give it a try.
It looks like it is not getting the required system
resources (RAM).
Thanks,
Vishal

I need Fusion help creating a demo of BRM JCA Resource Adapter

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Very slow performance running Mavericks - need troubleshooting help

Hello folks:
I have a MBP 2011 which was upgraded to Mavericks from Mountain Lion about 6 weeks ago. Since then I have had a major performance drop - slow machine, very slow window renderings, etc. I know a number of people have been facing these issues and have been recommended to clean up 3rd party extensions/agents. I ran Etrecheck (report below) and I need some help with fixing the failed kernel extensions and launch daemons. Thanks much!
Pavan
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information:
Western Digital My Book 1148 3 TB
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Memorex TRAVELDRIVE 005B 16.01 GB
EFI (disk2s1) <not mounted>: 209.7 MB
Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.installd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
[loaded] com.barebones.textwrangler.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
[loaded] com.google.Chrome.framework.plist
User Login Items:
Flux
iTunesHelper
Google Drive
Google Chrome
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins::
o1dbrowserplugin: Version: 4.9.1.16010
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.0.49
Loki: Version: 3.0
net.juniper.DSSafariExtensions: Version: (null)
RealPlayer Plugin: Version: Unknown
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivXBrowserPlugin: Version: 1.3
Silverlight: Version: 5.1.20513.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
AmazonMP3DownloaderPlugin: Version: Unknown
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
Audacity: Version: 1.3.14.0 - SDK 10.4
/Applications/Audacity/Audacity.app
Hugin: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/Hugin.app
Keynote: Version: 5.3 - SDK 10.5
/Applications/iWork '09/Keynote.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/PTBatcherGUI.app
Picasa: Version: 3.9.16 - SDK 10.4
/Applications/Picasa.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/calibrate_lens_gui.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
Destinations:
Gasolina [Local] (Last used)
Total size: 3
Total number of backups: 18
Oldest backup: 2013-07-09 19:11:24 +0000
Last backup: 2013-12-13 19:35:36 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 697.84 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      22% storeagent
      2% WindowServer
      1% backupd
      1% Google Chrome
      1% EtreCheck
Top Processes by Memory:
119 MB Google Chrome
102 MB Google Chrome Helper
82 MB mds_stores
57 MB Finder
33 MB WindowServer
Virtual Memory Statistics:
45 MB Free RAM
792 MB Active RAM
748 MB Inactive RAM
1.06 GB Wired RAM
37.63 GB Page-ins
1.98 GB Page-outs

Here’s your report with some comments:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information:
Western Digital My Book 1148 3 TB    WD drives are one of the worst things that can happen to a mac. They have software on the drive and also in the firmware of the drive enclosure that is incompatible with Mavericks. The software that they also want you to install on your mac (to run the drive with the shitware on it that is incompatible with Mavericks) is also incompatible with Mavericks. The best thing to do with this drive is to open it and remove the hard drive and put it into a new (non-WD) enclosure. Then smash the WD enclosure into little bits with a sledgehammer and mail it back to WD.
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Memorex TRAVELDRIVE 005B 16.01 GB
EFI (disk2s1) <not mounted>: 209.7 MB
Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)     This would be part of the shitware that you installed from WD. I would uninstall the WD application that installs this driver. If the driver is still there after that, I'd look for the extension in /System/Library/Extensions and delete it from there. This may have damaged your kernel, though. If your performance is not improved after removing the WD app and this extension, you should probably back up your documents, erase your HD, and do a clean reinstall of Mavericks.
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.installd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist    These four are all apple software. I would try repairing your hard drive: Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery . Then restart, reassess your mac’s performance, and rerun Etrecheck. If that doesn’t work, I’d reinstall Mavericks over your current installation. If that doesn’t work, I’d do a clean install.
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
[loaded] com.barebones.textwrangler.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.google.keystone.daemon.plist    spyware from google
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist   see the suggestions above.
[loaded] com.google.Chrome.framework.plist    This is why I prefer Safari. It doesn’t install all this extra junk.
User Login Items:
Flux
iTunesHelper
Google Drive   Last I heard Google drive was incompatible with Mavericks.
Google Chrome
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins::   Way too many of these. If you have poor browser performance, get rid of these, and then only reinstall ones you absolutely need, and make sure they are mavericks compatible and up-to-date.
o1dbrowserplugin: Version: 4.9.1.16010
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.0.49
Loki: Version: 3.0
net.juniper.DSSafariExtensions: Version: (null)
RealPlayer Plugin: Version: Unknown
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivXBrowserPlugin: Version: 1.3
Silverlight: Version: 5.1.20513.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
AmazonMP3DownloaderPlugin: Version: Unknown
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 6.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
Audacity: Version: 1.3.14.0 - SDK 10.4
/Applications/Audacity/Audacity.app
Hugin: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/Hugin.app
Keynote: Version: 5.3 - SDK 10.5
/Applications/iWork '09/Keynote.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/PTBatcherGUI.app
Picasa: Version: 3.9.16 - SDK 10.4
/Applications/Picasa.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
/Applications/Hugin/calibrate_lens_gui.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
Destinations:
Gasolina [Local] (Last used)
Total size: 3
Total number of backups: 18
Oldest backup: 2013-07-09 19:11:24 +0000
Last backup: 2013-12-13 19:35:36 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 697.84 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      22% storeagent
      2% WindowServer
      1% backupd
      1% Google Chrome
      1% EtreCheck
Top Processes by Memory:
119 MB Google Chrome
102 MB Google Chrome Helper
82 MB mds_stores
57 MB Finder
33 MB WindowServer
Virtual Memory Statistics:
45 MB Free RAM
792 MB Active RAM
748 MB Inactive RAM
1.06 GB Wired RAM
37.63 GB Page-ins
1.98 GB Page-outs This is the highest amount of page-outs I have ever seen. I'd get rid of Chrome and Google Drive. Dropbox works fine and doesn't screw up my mac.

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Need some help and guidance please!

Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?

Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-)

Roland Edirol, NEED TRACKING HELP!!!!! Weird Problem!

I need the help of one of you experts...
New to Logic but have used GarageBand for years. I am using a Roland Edirol UA-25EX interface. I am attempting to track a bass part in a project but have encountered a weird problem.
When I play the bass with the rest of the project (MIDI Drums and Piano) the input signal is at a constant state of peaking no matter how hard I play. I assumed that I was just sending to much signal into the computer from the interface so I soloed my bass track and all of a sudden it sounded fine (levels were good - no peaking). Then I un-soloed the track again and the crazy peaking was back.
After playing around with Logic and the Edirol for a few hours I couldn't trouble shoot the problem. I decided to hit record and see if Logic was recording the peaked out sound I heard (UNSOLOED) or the normal non-peaked bass tone I heard when it was soloed out. Sure enough when I listened back to the recording everything sounded fine!!
Thats good I guess... but I cannot track the bass part with the peaked out sound and when I turn it down to try and get rid of the clipping, I can't hear the bass enough.
Can someone help me with this please?!?!? Point me in a direction at least to try anything.....

I have an Edirol UA-25 that has drivers that stop working anytime there is an upgrade or sleep. You should write to Roland and complain, they were friendly and sent a zip of 10 copies of the driver and it's un-installer, so if,like today i let my iMac fall sleep the driver no longer works and I must unplug the USB Edirol,un-install the broken driver and install a new one before the Edirol will work again-I am on 10.5.8, hopefully the Snow Leopard drivers will be better. your "ex" model differs only in it's having a ground loop isolator, which I had to buy separately and it works fine but still not fair of Roland to sell such crap.

Need installation help

Similar Messages

Maybe you are looking for