Need planning tutorials

Hi,
can any one help me or share the materials and tutorials of Planning 11.
I have installed and Configured EPM 11.1.1.3 in my laptop and i already completed all the tutorials that were published in oracle website.
Thanks!
Siva.

Hi,
Try HERE and HERE
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

IW32 needed Plan Cost and Actual Cost table name

Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahul

hi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish

Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Press F1 within the application to open the Help section.
If you have specific questions ask them in the Acrobat forums (this is the Reader forum).

Need OAF tutorials

Hi all OAF gurus,
I need the tutorials, study materials for OAF. Can some body give me the url for such download or reference ??
Thanks in advance.
Upender

Hello again,
Sorry, I'm not for sure what exactly ATG stands for...It is something to do with the framework patches...
Search for this note on Metalink. It will tell you which jDeveloper patch to install, based on your patch levels. Once you've installed it, the tutorials are in its Help section.
'How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]'
Note 416708.1
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=416708.1
Hope this helps,
Janel

Help needed - Planning Server 2012 solution, DC/Exchange/SQL/RDP host/Remote apps etc

Hi All,
I have a client needing me to provide a Windows server based solution for their business. I have limited experience with Server 2012, although I have worked with 2008R2 and SBS2011, I am needing some guidance with this 2012 project.
The client has about 8-10 local users who work at one office with an NBN connection, and 2 other locations that have 3-5 users at each location. I am needing to provide them with a server based solution to manage their data, remote access and also their
email. They are also likely to expand to another physical office soon.
I need to provide them with a DC controller, Exchange server and possibly an SQL server in the future. They currently use an Act database, but I have been told that once the database in ACT grows to 4G, a dedicated database is required?
I am currently thinking of having one physical server and virtualising the additional servers on this platform, however I come from a UNIX background and have not virtualised using Hyper V or ESXi before. I have read a little regarding the CLI and GUI Hyper
V options, but I really need advice on what will suit my needs best from someone that has done it.
I am thinking I maybe should recommend one physical machine with Server 2012 Std which, from what I understand, will allow me to install the host hyper V host on the physical machine and then I could possibly install an instance of Server 2012 as
the DC, Exchange and SQL server on one VM licence, however I have read it is not preferred to have the exchange server on the same VM as the DC but have read that limiting the memory usage of Exchange can negate these issues?
I will also need to have a terminal server/RDP session host in there as well which I could maybe use the 2nd VM licence for.
I suppose my question is, considering that I need to end up with a DC, Exchange server, terminal server/RDP session host and possibly a SQL server in the future, am I better off virtualising and running these on a Server 2012 Std licence, that allows a hyper
v host + 2xVM's or should I be splitting these roles up on different physical machines, keeping in mind costs need to be kept to a minimum.
Also I need to consider the Microsoft Office side of things. Is it more financially viable to use office licences and use remote apps from the terminal server, or just purchase Office H&B for the workstations/laptops and have their outlook connected
directly to the exchange server?
I am concerned from the performance viewpoint that if I run the DC/Exchange and SQL from one VM, then the TS/RDP Host from the other VM licence it may be too much for the DC/Exchange/SQL VM to handle.
I have used SBS 2011 in a few locations with Exchange and the SQL and DC roles installed on HP DL and ML gen 8 servers, and although they run a little slow on the console, they seem to serve the network clients fine.
If do end up running on one physical machine the Hyper V host, one VM as a DC, Exchange and SQL server, and the other VM licence as a RDP session host, what sort of spec'd machine would be recommended to be able to do this, keeping in mind
I usually lean towards HP servers.
Anyhow, thx in advance and any comments or suggestions will certainly be appreciated.
Mkm

Hello,
sorry but in your case without the knowledge of all major requirements i would suggest that you or your client contact an expert and not work with the forums to get this amount of information and setup requirements.
Exchange on DCs is NOT recommended, even not from Microsoft. Also it is highly recommended to run at least 2 DC/DNS/GC per domain for failover and redundancy, of course NOT on the same physical machine.
RDS servers should also run on dedicated machines and not be used for anything else.
SQL should also run on a separate server.
You cannot compare SBS version with regular server versions, the concept behind is different.
With that small amount of users you should consider using an Office365 solution where you could use a plan that fits your needs and have just computers for your client employees.
But as stated above therefore you should find an experienced consultant.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Need Planned PO and PO Releases API or Interface

Hey guys i hope you will doing well. My client using external system for Planned PO and its releases i need to integrated custom Application with EBS, so that why i need Interface or API load Planned PO and its releases.
I am waiting for kind response.
Regards
Mazhar Hussain

Hi,
Go thru
www.irep.oracle.com
Navigation
--SCM
---Inventory
-------Material
--Basava.S

Need advice (tutorials)

hi
I am new to photoshop.I am interested in learning and doing stuff with images like editing in images by myself.I am a Java Programmer and i would like to go into the field of web designing.i have tried many tutorials and none have seen explaining a single method in photoshop from basic.everything just shows how to do it .I am very much confused with where to start from for my learning of Ps.I dont mind about time i just need a little pick and clear idea.could anybody can advice me where to start with ?i hope with the above one can understand my situation
Thank you

lynda.com and the classroom in a book-series seem to have good reputations as learning materials.
Also there are Fora that might address web-design more specifically:
http://forums.adobe.com/community/design_development/webdesign
Have you checked out
http://tv.adobe.com/
yet?
And as for Photoshop itself, I have picked up quite a bit of useful stuff from
http://kelbytv.com/photoshopusertv/
even though some techniques presented there are unnecessarily destructive or crude.

Need 3D tutorials

Hi, does anybody know where I can find detailed 3D Javascript tutorials. I'm having a hard time finding any tutorials online, pay or free. I have some AS3 experience, but just starting to learn JavaScript, so I need like the ground-level type tutorials. I need to manipulate 3D models to create field service training material.
Thanks!

Thanks for the links Dave. I have watched several of your presentations, and they are great! I have been watching "Talking to 3D and Flash with Acrobat 9 and JavaScript", there is a lot of good information in it, but something is wrong with the audio. I have to listen over and over to decipher it. I write technical training material for General Electric field service technicians. Right now we use PowerPoint presentations, but my goal is to use a PDF document that contains a 3D CAD model and a Flash movie. The Flash movie takes the tech through a tour of the appliance's schematic. When the Flash movie comes to a component on the schematic, I would like to have Flash tell the 3D object to move to a specific view, and set part visibilties that will show the location of the schematic part on the 3D model. Is this something that can be done fairly easy through JavaScript? My alternative is to export the CAD file as a movie and embed the video in the Flash timeline, but if I do that I will lose the ability to allow the tech to interact with the model.
Any suggestions will be appreciated... thanks.

Need online tutorials for balancing ragged text

Can anyone recommend online tutorials on how to work with ragged text in Indesign? I need a quick & dirty overview on how to achieve better balanced ragged text but many of the online sites I've encountered don't talk about how to "design" text....I'm getting a lot of steep slopes and weird gaps on my flushed left type despite experimenting with the composer features.
Please provide direct links to articles/videos not just website names.
Thanks for any help.

amebade05 wrote:
Can anyone recommend online tutorials on how to work with ragged text in Indesign? I need a quick & dirty overview on how to achieve better balanced ragged text but many of the online sites I've encountered don't talk about how to "design" text....I'm getting a lot of steep slopes and weird gaps on my flushed left type despite experimenting with the composer features.
Please provide direct links to articles/videos not just website names.
Thanks for any help.
Have you tried Google searches for:
how to set ragged right text indesign tutorial
AND
how to set ragged right text indesign
AND
indesign typography tutorial
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

No need planned orders for G/W

Team,
while running MRP for fg items, we need to create only PRs and not need to create any planned for glassware items.how to do it? i know that we can change the planning method..is there any other option other it?
Thanks,
Vijesh

Dear ,
In MD02 , if you keep Create Purchse Req Indicator as 1 means it will create PR for raw matearil having Procurement Type -F in MRP2 view otherwise , If you keep 2 , then it will create PR based on the Opening period as per Re-scheduling Horizon maintained in OPPQ-MRP Plant parameters .
Both the way it will generate PR but there is a pre-condition in case of 2.
If you want PR only keep 1 and maintain F as Procurement Type in MRP2 for raw and E for FG
So u need to keep : MD02-NETCH , 1,1,3,3,2 and mark display result before save.Check in MD04.
Check you planning horizon and re-scheduling horizon in OPPQ which is crtical in Indicator -2 to generate PR otherwise simply go for 1.
Try and revert
Regards
JH

Need Video Tutorials

hi frntz,
Is there any website that contains free video tutorials for oracle technical streams especially Workflow,Reports etc...,

In YouTube, you will find plenty of them. You can find some good videos at http://apps2fusion.com/

Need good tutorials

Hi i am new to ODI and need to learn about it. So can anyone point some good basic level document/tutoiral (good to have a downloadable version)

You may find the following useful
http://www.oracle.com/technology/obe/fusion_middleware/ODI/index.html

Need Planning Material field (FDGRV) from ECC LFB1 table

Hello,
I am creating freight separation reports and have run into problem. Initial specs were to differentiate freight vendors by using different vendor party. Purchasing dept had determined that all freight vendors would we within a set range. Now in testing, it has been uncovered that sometimes another vendor will be used which is not within that range. Users have now confirmed that I could use the planning group field - FDGRV - from table LFB1.
Data model - multiprovider is in place. Using 2LIS_06_INV - Invoice Cube and Custom DSO of purchasing budgeted data.
I know that I could enhance the 2LIS_06_INV datasource and bring in Planning Group - FDGRV - from LFB1 table.
Another consultant suggested the idea of bringing it in as an attribute to the different vendor party field?
Can anyone help walk me through these steps? I am not experienced with this method.
Thank you...

I figured it out....completed...

Need Planning Layout help...,?

Hi all,
In planning layout what is the procedure to make proper settings. and also what is the conditions in there. can anyone explain it plz. if any doc's having any one on this, plz. send it [email protected] waiting for yours valuable reply.
Thanks in advance.
Regards,
Kiran.

Hi Kiran,
here are the conditions / settings that determines the planning layout definition / design.
http://help.sap.com/saphelp_sem40bw/helpdata/en/d6/b13ed98b8211d3b7360000e82debc6/content.htm
for more, go here
http://help.sap.com/saphelp_sem320bw/helpdata/en/09/078a4b016311d393850000e8a597a0/content.htm
hope it helps

Need Planning study material

Hi friends,
Can anybody give me some hyperion planning pdf links.
Also suggest some books.
Planning for certification.
Thanks,
Rohit

The Hyperion Planning Certification contains a lot of both Essbase and Planning material. Your best bet would be to have a concrete understanding of the relationships between the two products. You will also likely be asked about properties in EPMA and how they relate specifically to Planning.
Financial Reporting will make a cameo appearance as well as some reference to Smart View...
I think what I'm trying to get across is not so much what to read but that the certification is so broad (and at times ambiguously vague) that there is no "Study Material" that does it justice. I think there is no substitute for experience using the products at length.
If I had to review anything, I'd be lookng at the technical documentation for both products.
Regards
Ed

Need planning tutorials

Similar Messages

Maybe you are looking for