Need some Help in Design please...
Hi All,
I am creating dimensions for my sales cube in which I am going to store Day level data with Customer and Material Data. I have to store all the Customer and Material Groups (1-5) in the cube as most of the reports are based on them. I have planned to created 2 seperate dimensions for Customer and Material and include all the Group fields as well in the respective dimensions. But, as Customer and Material master data itself are gonna be big, I am bit confused if it creates a performance issue if I include the groups in the same dimension. I remember that there is a rule like Dimension table should be < x% of cube (I didnot remember the exact figure)...Any suggestions on this design please...
I am in the process of creating process chain for my FI-GL and FI-AR flows. I am loading both line item and transaction level data for both of them. I am confused if I can include both the flows in the same chain or seperate ones? What is the sequence in loading the data i.e First Transaction or line item? First GL or AR? Any such dependencies?..Any help please...
Best Regards,
James.
Hi,
Generally, if we need to take Characterstics like Document no as part of the cube then we define them as line item dimensions, becuase we can easily predict that the no of entries in those dimensions are almost equal to fact table entries. So ask your business process team to tell about no of new entries created for Material and customers.On that basis you can decide whether it should be a Line item Dimension or not. It is juat a hypothetical assumption.
For further info on how to decide which dimension is line item dimension, search the forum.
And comming to chain:
You can go with that design.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
I need some help with the GUI design.
Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred -
Need some help and guidance please!
Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-) -
Basic Output program need some help...Please
import java.io.*;
class FileOutputDemo
public static void main(String args[])
int one=1, two=2, three=3;
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
// Connect print stream to the output stream
p = new PrintStream( out );
p.printf ("This is written to a file %d", one);
p.close();
catch (Exception e)
System.err.println ("Error writing to file");
}Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
I have a list of integer values like 1, 2, 3, 4? 10
And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
This is written to a file 1
This is written to a file 2
This is written to a file3 ?etc
Also this substitution has to be outputted to a new file every time.
Thank you very much in advance for your kind help
if i have to post this anywhere else please advise me..
Adamimport java.io.*;
public class FileOutputDemo
public static void main(String[] args) {
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
p = new PrintStream( out );
int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
for (int element : arrayOfInts)
p.printf (element + " ");
p.close();
// Connect print stream to the output stream
catch (Exception e)
System.err.println ("Error writing to file");
}ok .... guys i really understand what do you mean,
i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
Thanks -
Hey I need some HELP!! Please, it's important...
Hi everybody! First post in here...well today I accidentally installed iTunes 7.6 pressing "software upgrade". Since I'm using OSX 10.4.8 iTunes 7.6 doesn't open: it pops out kind of "need the OSX upgrade for 10.4.9 or 10.4.10 up!!"...I can't upgrade to 10.4.10 or 10.4.11 because of Pro Tools (7.1 version can give some trouble with these OSX versions).
WHAT SHOULD I DO??
Should I uninstall iTunes 7.6? Just by trashing it and then using an old version (which one would you suggest)?? I found (http://mac.oldapps.com/itunes.php) old iTunes version...but I actually can't remember which one I was using (it worked great with my 10.4.8).
Gotta say I'm a little bit scared...thanks in advance!
HedSearching in the forum, I found this...
"To downgrade - D/L what version you want at - http://www.oldapps.com/downloadiTunesmac.php
Go to HD>Library>Receipts - remove the iTunesX.pkg to the trash.
Drag your iTunes app to the trash. B/U your iTunes Library and .xml files. B/U your iTS purchases.
Repair permissions with Disk Utility - install iTunes - repair permissions again.
Open iTunes - if all is well you can empty the trash.
MJ"
But which version should I use with OSX 10.4.8??
Any help?
...Hed -
Hy everyone!!!...please, help me,i realy dont no what else can i do,the phone its block i think,cus give me the1611 code error at the time i want to reiniciatet or restarded(with itunes or without);thanks!
hey...!!!!!! i am also facing the same problem but my error code was 1602 and now after that problem my iphone got connected to ituns but it is showng restore option afte doing once....its again showing that option ..........help me if you know something
-
Need some help understanding AUR please solved
Still learning the command line here sooooo....
I've read and reread everything recommended regarding AUR.
Somewhere I'm overlooking or missing something.
The AUR users guide says to:
Users can access the AUR [community] repo by adding/uncommenting this line in their pacman.conf file:
Include = /etc/pacman.d/community
Well that line doesn't exist so the guide says to:
If /etc/pacman.d/community does not exist then it should be created and contain the following:
[community]
Server = ftp://ftp.archlinux.org/community/os/i686/
Evidently I might have a pacman.d/community, but when I pull it up with nano, it's a totally blank page which leads me to believe it's there but not actually created.
I can't find anything that tells me what I need to do to make sure I've created a pacman.d/community.
Is a blank page right or shouldn't there be some text in there with comments?
I can and have installed a few things with yaourt, but I know that I've been lucky so far with that as I know something isn't right.
I have to use my user password and then my root password in that order or nothing will finish installing so I've stopped using it until I have a better understanding of it.
Man,, all I wanna do is try out doom3-phantasm,,, for now anyway.
Last edited by windtalker (2008-04-04 00:40:26)windtalker wrote:
Floke:
I tried that, pacman won't synch with that addy.
Brebs;
That's how pacman.conf is set for all the repo's listed. [mirrorlist]
I know phantasm is in unsupported, I'm trying to figure out how to get unsupported added to pacman so I can get it.
Theringmaster:
Yaourt is installed and as I've said I've used it, but, as I also said, each time I use it just before it completes the install it asks for my password, which is fine, but I have to first enter my user password which it refuses, then my root password which it accepts.
It flat wil not settle for me simply using my root password like it should.
I've tried several times and this is something that I'm missing also somewhere somehow.
To my way of thinking, it should be like pacman and accept my root password no questions asked.
I'll also add that I've tried installing phantasm with yaourt.
It found all the depends and compiled the complete package.
When it came to the stage to do the actual install, it asked for a pasword.
I've tried my user pasword followed by my root password and was kicked out.
I've tried just my user password and was rejected.
I've tried my root password and was rejected and when re-entered was kicked out.
Unless things have changed with Arch and the guide is out of date, there should be a way to add unsupported to pacman.
I'll try flokes suggestion of changing the permissions in sudo and see what happens.
Thx guys.
edit: How the heck does one save a change in VI?
you do have to have sudo installed and configured (just a three step process see wiki) to use yaourt properly. to save a change in vi press :wq -
Still need some help.. Please!
I´ve tried to do the tree component transparent so that
I can see the background thru it but it doesn´t seem to work.
Do any one know how to do??cSource3D=thisComp.layer("Light"); //reference a 3D light as source
cSource2D=cSource3D.toComp([0,0,0]); //convert to screen coordinates
cMiddleX=thisComp.width*0.5; //midpoint X
cMiddleY=thisComp.height*0.5; //midpoint Y
cDiffX=cSource2D[0]-cMiddleX; //position difference X
cDiffY=cSource2D[1]-cMiddleY; //position difference Y
cAngle=Math.atan2(cDiffY,cDiffX); //find angle
cOffset=200; //distance from middle
X=cMiddleX+Math.sin(cAngle)*cOffset;
Y=cMiddleY+Math.cos(cAngle)*cOffset;
[X,Y]
Yes, simply copy&paste the above code ( I corrected the typos) to your secondary element and adjust the cOffset variable to suit (you could tie it to a slider, if needed; negative values move in opposite direction). Make sure to adjust the reference to the light in your comp (or your 3D Null). If you use an expression Point control or the Lensflare effect on a solid, you don't need the first line and the second line would then look something like that:
cSource2D=thisComp.layer("Lensflare").effect("Lens Flare")("Flare Center")
Mylenium -
I need some help here. someone please respond with some type of idea.
okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and
it's just a constant green light in the front that
wont go away. it wont play, and wont have any affect
on the buttons or anything. it's just a steady green
light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.
See if this helps:
http://docs.info.apple.com/article.html?artnum=303332 -
I'm typing up a long paper, and I have a outline that I made in outline form.
ie -
I.
A. xxxxx
B. xxxxxxx
Now what I want to do is go under each line in my outline and make remarks. What I want to do is start my comment where the first letter of the outline is (for instance, under the first "x" of letter A.)
What I'm doing is going to the inspector and change the option under "follow paragraph style" to "free form", then I hit enter, tab over, and it works. But every time I to go the time line it goes back to "original" and I have to change it back to "free form"
Is there a way to keep it on "Free form" so I can just in my outline? is there any eaiser way to do what I'm trying to do? I really need to get this done tonight.
thanks!You need to redefine your list style.
What you are going to do is the 3rd level will be indented but have no number.
Create a sample of the list text with only the 3 levels
Select the 3rd level text and go:
+Inspector > Text > List > Bullets & Numbering > No Bullets+
This will be indented too far in.
With the 3rd level still selected:
+Inspector > Text > List > Bullets & Numbering > Text Indent: 0.2 cm (in my case)+
till it aligns with above.
Now select the whole range of the 3 level list:
+Menu > View > Show Styles Drawer > List Styles > click on tiny triangle > Create New List Style from Selection… > Give name > OK+
Use that as your list style from now on.
Peter -
Need Some Help Big Time please
Right one day when i was leaving my house turned the computer off as you do.
came back in turned it on and when it comes to the white apple logo to load all of a sudden a black screen appears with all this text.saying something about there being no debug information and the very last line it says is
panic:we are hanging here...
it completely disables my keyboard and mouse any suggestions to what is wrong?
thanks
Perry[Apple docs: What's a "kernel panic"? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Topic : kmosx: Kernel Panics ? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html] -
I need some help on pictures please!
Heya ive just got the new iphone everything is working perfect and im loving it great!, now my issue is im adding music and stuff thats fine when i add pictures from my itunes though snyc it doesnt apper anywhere on my iphone why is that ? my photos from camera are there but the 200 pictures id like from my computer are not there, i manage too find them in the "wallpaper" settings but id like to have them as a slide/show what folder are they in or do i have to do?? Thanks
You're not confusing this with a shared Photo Stream...?
Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
iCloud: Change your iCloud account password
If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
It is not necessary to change your Apple ID unless it is an email address you no longer wish to use. -
Please i need some help time capsule and airport express wireless extender
hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.
Hello fastuca. Welcome to the Apple Discussions!
Let's double-check your base stations' settings ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the Time Capsule (TC).
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility) -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.
Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.
Maybe you are looking for
-
Missing files from creative cloud
Numerous files have gone missing. The folders are there, but there is nothing in them. Also, I've checked the archive folder, and it is also empty.
-
Hi, I am using Fireworks CS3 and I want to make a button with a rollOver feature but all the tutorials says I need to go t o 'states' but I dont know how to get to it. I have looked all through the Window tab at the top but cant find anything on stat
-
Indesign CS5 crashes when deleting an index
Hi, Indesign CS5 crashes when deleting an index. Thanks for your help.
-
Do Query Views use existing OLAP Cache or create their own
Hi, I'm looking to find out if a Query View will use the Parent Query OLAP Cache or will it create it's own? I am imagining that it would use the query view, but create additional cache if it drilled down on a free characteristic that wasn't in the
-
When attempting to download the latest version of iTunes I receive a message that there is no installation package found (iTunes.msi). Searching my computer, I cannot locate a file with the msi designation. Tried to use the .exe file unsuccessfully.