Need to add Plant and CostCenter as Selection fileds of CJI3 Initial screen

Hello Team,
Can you suggest me OSS note or User exit to add Plant and CostCnters as selection criteria for CJI3 Actual cost line Items report.
Thanks in advance,
Best regards,
Harish.P

Harisha
I agree with above reply but your requirement sounds a bit weird.
Note sure if cost element reports are any useful for your requirement.
Look (refer note) at the report painter option ( but you might still need to enter the Project/WBS)
Note 668513 - FAQ 2: Cost element reports in Project System
Regards
Sreenivas

Similar Messages

Need to add push botton in my selection screen

Hi
I am doing a report program . I need to add PUSH BUTTON in my selection screen can u give me any code or suggestions for this.
IF i press this push button i should get the basic list.
Regards
Rasheed.

Hi Here is a another example.
U can place a Push button on selection screen by using the satatement..
SELECTION-SCREEN PUSHBUTTON 2(10) butt USER-COMMAND cli3.
The push button will start from second character position on Selection screen and of length 10 characters !!
check this program...
TABLES sscrfields.
DATA flag(1) TYPE c.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE tit,
BEGIN OF LINE,
PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
PUSHBUTTON 12(10) text-020 USER-COMMAND cli2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) but3 USER-COMMAND cli3,
PUSHBUTTON 12(10) text-040 USER-COMMAND cli4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
MESSAGE i888(sabapdocu) WITH text-001 sscrfields-ucomm.
CASE sscrfields-ucomm.
WHEN 'CLI1'.
flag = '1'.
WHEN 'CLI2'.
flag = '2'.
WHEN 'CLI3'.
flag = '3'.
WHEN 'CLI4'.
flag = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
Reward me if its helpful.
Regards
Ravi

Change COPA Report - need to add Variable and Characteristics

Hello,
I need to change the existing COPA report, Need to add WBS element as a selection criteria and also a characteristics so it can be drilled down. Create WBS as a global variable in KE3E and it is not showing up in when i change the report in KE30 in the available list of characteristics. And also it is not showing up in KE35 when i change the general selection to add as a Variable.

Go to KE91 and create the report.
In KE91, the Characteristic Cost element (KSTAR) is available. Add it as below.
Cost Element .... Check the box Hierarchy node ...... check the box Variable on/off ...... KSTAR...... Cost element.
After this, just check in Variable, the Cost element shuold appear
Line item based reports are defined in KE91 (segment level reports in KE31).
Both types of reports can be started in KE30 and changed in KE32
Let us know if you still have any queries
Thanks
Edited by: nkonnipati on Feb 19, 2012 5:34 AM

Validate plant and material on selection screen with select-options

Hi all,
I want to validate plant and material on selection screen. More over I need to validate the combination of that also (i.e plant based materials). Individually I made the validations, but combination I didnt get it.
For your information both are select-options, please reply me if you have an idea. The table to get the relationship is KEKO. <b>I have the below code for parameters, but I require code for select options.</b>
SELECT MATNR WERKS FROM KEKO UP TO 1 ROWS
INTO (KEKO-MATNR, KEKO-WERKS)
WHERE MATNR = P_MATNR AND
WERKS = P_WERKS.
IF SY-SUBRC <> 0.
MESSAGE E023 WITH 'COST ESTIMATE NOT FOUND FOR '
P_MATNR P_WERKS 'COMBINATION'.
ENDIF.
ENDSELECT.
Surely I will reward you.
Thanks in Advance,
Raghu.

Raghu,
You can't validate on select-options, MARC will have N to 1 relation between Material and plant.
You can do one thing, keep material as select-option and plant as parameter, now you can validate the materials on plant level.
Reward if this helps,
Satish

Validate plant and material on selection screen

Hi all,
I want to validate plant and material on selection screen. More over I need to validate the combination of that also (i.e plant based materials). Individually I made the validations, but combination I didnt get it.
For your information both are select-options, please reply me if you have an idea. The table to get the relationship is KEKO. I have the below code for parameters, but I require code for select options.
SELECT MATNR WERKS FROM KEKO UP TO 1 ROWS
INTO (KEKO-MATNR, KEKO-WERKS)
WHERE MATNR = P_MATNR AND
WERKS = P_WERKS.
IF SY-SUBRC <> 0.
MESSAGE E023 WITH 'COST ESTIMATE NOT FOUND FOR '
P_MATNR P_WERKS 'COMBINATION'.
ENDIF.
ENDSELECT.
<b>Note: I need to calidate on KEKO only..</b>
Surely I will reward you.
Thanks in Advance,
Raghu.

Hi rag ,
The following code will works .... i have practically used in my report.
Local data declaration
DATA: l_material TYPE matnr.
Validation check for material
IF s_matnr IS NOT INITIAL.
    SELECT matnr          "material
      FROM mara
        UP TO 1 ROWS
      INTO l_material
     WHERE matnr IN s_matnr.
    ENDSELECT.
    IF l_material IS INITIAL .
    Invalid material entered .
      MESSAGE e136.
    ELSEIF s_mawerk IS NOT INITIAL.
      CLEAR l_material .
    Validation check for material exists in plant
      SELECT matnr        "material
        FROM marc
        UP TO 1 ROWS
        INTO l_material
       WHERE matnr IN s_matnr
         AND werks IN s_mawerk.
      ENDSELECT.
      IF sy-subrc NE 0 .
      Invalid material entered for the plant.
        MESSAGE e130.
      ENDIF .
    ENDIF.
ENDIF.

Need to determine plant and storaeg location for item in delivery

Hello All,
I have an inbound IDOC which changes the quantity of items in a delivery and also adds new items if necessary. I need to do a auto PGI also if required.
Am using BDC to update the delivery. Now the problem is when I add a new item to the delivery. I add the material, quantity and Unit recieved from the IDOC. I need to determine the plant and storage location and fill that too in the delivery.
Kindly let me know how I can determine these two values. Which table holds this data?
Please note that I am changing only the delivery. The document preceding the delivery wont be changed.
Thanks for your help.
Regards,
Johnson

normally the plant is determined on this basis:
customer inforecord (table KNMT)
customer master (KNVV)
material (MVKE)
The storage location is determined in table TVKOL based on:
shipping point (you have it in delivery header LIKP-VSTEL)
plant (see above)
storage conditions (material master MARA-RAUBE)
regards
Roberto

Need to add Header and footer in an alv grid display output.

How can I add header and footer in an alv grid dispay output.
For the grid display, I am using the function module "REUSE_ALV_GRID_DISPLAY".

HI,
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_html_end_of_list = 'END_OF_LIST_HTML'
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
        l_grid     TYPE REF TO cl_gui_alv_grid,
        f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'IL'.
adds test (via variable)
CALL METHOD end->add_text
    EXPORTING
      text         = ls_text
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Bold text'
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Nor'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Yellow '
      sap_emphasis = 'str'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'IC''.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Mor'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
    EXPORTING
      id     = 3
      height = 14.
ENDFORM. "end_of_list_html.
This will solve it. Post if you need more help in this.
Regards,
Madhu.

Need to add more field in the selection screen in tcode crm_dno_monitor

Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
Prasad

If you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii

Need to add row and set attribute value on pageload

Guys,
On my page based on the pageflowscope variable value, i need to add a row for master and one row for detail viewobject and set attribute values. (Some of the attribute are LOV and Checkboxes as well)
I am using following code to create records.....records are being added but i am not able to set the attributes
OperationBinding ob;
ob = ADFUtil.findOperationBinding("Create");
ob.execute();
ob = ADFUtil.findOperationBinding("CreateInsert3");
ob.execute();
I am using following code to set the attributes value
DCIteratorBinding dc1 = ADFUtil.getBindingIterator("firstiterator");
DCIteratorBinding dc = ADFUtil.getBindingIterator("seconditerator");
row1=dc1.getCurrentRow();
row=dc.getCurrentRow();
row.setAttribute("activest","A");
row1.setAttribute("type","dc14");
Anything i am doing wrong here or any suggestion to try is greatly appreciated....

Vinod,
Yes commit button is there and yes its also has entry in pagedef...
When I open the same page on edit mode and i can edit regular record and save them
Problem is that when i open the page on new mode and try to add rows on page load..... and setting values as described above.... save button somehow doesn't work...
seems like after i add the rows on the fly, i need to refresh the binding?
any help is greatly appreciated....
thank you guys

'Music' displays but won't play. Settings appear correct and iPhone is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

'Music' displays but won't play. Settings appear correct and iPhone (3G) is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

Thank you for the replies.
Appearane of 'Music' functions (I>> > II <<I, plus volume slider) on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged. When using home sharing this same problem persists regardless of what output is selected.
Hope that may prompt a thought somewhere.

Need to add Plant name to PO list in SUS SRM 5.0

We are looking into adding the plant name to the 'List of Purchase Orders' screen. Just checking to see if anyone has already done that. If so would you please guide me on how to do that.
Thanks
Krishna

Hi,
You need to make changes in the BSP page which is used for the display of sus order list.
1.se80.
2.select bsp application , and SRMSUS.
3.there will be one page specific for showing list , there you need to write code according to your requirements.
another way could be to implement customer fields and then storing the plant in one of the customer field and using that for display in the overview.
award points if usefull

Need to Add BKTXT in the dynamic selection in FB03

Hi Gurus,
In the dynamic selection FB03, the field BKTXT is not included in the dynamic selection. Would it be possible to add this field?
Youre inputs would be greatly appreciated.
Thanks and best regards,
JeCCas_DJ

Hi,
You wants to add the BKTXT field on the selection screen of FB03?
Why? for what purpose?
Better copy the program related FB03 to some Zprogram and modify it by writing a select statement to get this BKTXT firld form BKPF/BSEG tables.
SInce this is a text field, normally we don't put onthe selection screen.
Regards,
Anji

HT201240 I need to add software and can't recall password. Recently had Apple transfer all files on my 2007 vintage IMAC to a new one.

I recntly purchased an Imac and had a data transfer from a circa 2007 Imac. I can't remember by admin password to allow software downloads etc.

Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
      the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
      command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command
     until you do. If after seven tries you still do not receive a "Filesystem OK"
     message, then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed.

I deleted bookmarks tab and need to add it and don't know how?

I deleted the favorites tab on the toolbar and don't know how to add it back. Help

In Safari SHIFT + COMMAND + B:
Ciao.

Need to add print and download options for report in new window

Hi,
On one of the columns empid of the report1 (which is on the dashboard) , I am using navigation and pointing it to report2.
Report1 has all the links, print, download and refresh (I enabled them using the section properties) but when I click on empid and it takes me to report2, then I don't see any links under that report. I want to include print and download links for report2 when it opens in the new window.
I know, one way is to embedd that report in the dashboard page and hide it, but is there any other way of doing it?
Any help would be highly appreciated.
Thanks,
Ronny

Ronny wrote:
Just to clarify again, I am using a navigation from report1 (which is on the dashboard) to report2 (which is not on the dashboard).
As per the requirements, I can't put my report2 on any dashboard page and hide it and then use navigation. Also, I can't enable the print and download options for report1 which is already on the dashboard. Doing this gives me print and download options for report2 but that is not the requirement.
Is there any way to have print and download options for report2 when I am directly navigating to the report2 from report1 and not the report2 on any dashboard page which is hidden.
I will really appreciate any help on this.
Thanks,
RonnyPlease explain why you can't do what I said. What is the "requirements" that prevent this? It would be transparent to the user, really. They just click and get their report.

Need to add Plant and CostCenter as Selection fileds of CJI3 Initial screen

Similar Messages

Maybe you are looking for