Need to help in initial data loading from ISU into CRM

One our client has requirement as
All ISU data applicable (BP, BA, the appropriate technical data, Contracts, Products, Product Configuration and their correspoinding price Keys and Price Amount) to CRM should be loaded into CRM as the part of the intial load.
Eventhough ECRM_GENERATE_EVERH in ISU but its documentation is not available.
Is any provision like Report or RFC or function module present in SAP.
I would appreciate for you all quick reply with positive and appropriate solution. mailto [email protected]

Got my answer.We can clear the data using MDX.

Similar Messages

Data load from BPC into BI 7 cubes for Bex reporting

Hi,
Can we pull BPC planning data into the BI cubes so that Bex reports can be created for combined data from BPC cubes and BI cubes?
Also can we create Bex reports on BPC cubes just like we create for BI reporting cubes?
Let me also give an example of the scenario we face.
We have actuals data in a BI 7 basic cube(Actuals cube). Planning is done in BPC, so I understand that the planned data gets automatically stored in a BPC cube in BI7 system. I want to load the data from this BPC cube to BI Actuals cube and create a combined Bex report to show actuals and plan data.
Please let me know.
Thanks,
Archana

AS of now, if you report data in the BPC7NW cubes through BEx, you may not get the same result as you get from BPC reports. The reason being BEx won't do the same calculations (for example sign reversals) that BPC client would do. In addition, you won't be able to report the results of the dimension member formulas when you report through BEx. If you have to get data out from BPC cubes to other cubes, you can go through SQE (shared query engine) and that way, yyour results will match with what you get in BPC reports. Once you get data out through SQE into other cubes, you can use BEx to report if you wish.
More functionality will be available in near future to accomplish BEx reporting for BPC data.
Regards
Pravin

Unexpected query results during large data loads from BCS into BI Cube

Gurus
We have had an issue occur twice in the last few months but its causing our business partners a hard point. When they send a large load of data from BCS to the real time BI Cube the queries are showing unexpected results. We have the queries enabled to report on yellow requests and that works fine it seems the issue occurs as the system is processing the closing of the request and opening the next request. Has anyone encountered this issue if so how did you fix it?
Alex

Hi Alex,
There is not enough information to judge. BI queries in BCS may use different structure of real-time, basic, virtual cubes and multiproviders:
http://help.sap.com/erp2005_ehp_02/helpdata/en/0d/eac080c1ce4476974c6bb75eddc8d2/frameset.htm
In your case, most likely, you have a bad design of the reporting structures.

Help Required regding: Validation on Data Loading from Flat File

Hi Experts,
I need u r help in the following issue.
I need to validated the transactional data loading to the GL Cube from Flat file,
1) The transactional data to the Cube to be loaded only if master data record exists for the 0GL_ACCOUNT info object.
2) If the master data record does not exits then the record need to be skipped from the loading and after the loading the system should throw a message saying that these many records have been skipped (if there are any skipped records.).
I would really appriciate u r help and suggestions on solving this issue.
Regds
Hari

Hi, write a start routine in transfer rules like this.
DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
 l_s_errorlog TYPE rssm_s_errorlog_int,
 l_s_glaccount type /BI0/PGLACCOUNT,
 new_datapak type tab_transtru.
 refresh new_datapak.
 loop at datapak into l_s_datapak_line.
 select single * from /BI0/PGLACCOUNT into l_s_glaccount
 where CHRT_ACCTS eq l_s_datapak_line-field name in transfer structure/datsource for CHRT_ACCTS
and GL_ACCOUNT eq l_s_datapak_line-field name in transfer structure/datsource for GL_ACCOUNT
and OBJVERS eq 'A'.
 if sy-subrc eq 0.
 append l_s_datapak_line to new_datapak.
 endif.
 endloop.
 datapak = new_datapak.
 if datapak[] is initial.
abort <> 0 means skip whole data package !!!
 ABORT = 4.
 else.
 ABORT = 0.
 endif.
i have already some modifications but U can slightly change it to suit your need.
regards
Emil

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Need Help about Spatial Data Load - Mapviewer

Hello everybody,
I need an immediate help about spatial data load. I installed Oracle mapviwer quick start and try to work on it. However, I could not pass the load step. My questions are;
1- Where can I find and download my country's data set (spatial data)
2- With mapviwer, how can I load spatial data to my tables on database (Oracle). Those tables have sdo_geometry columns and I want to query location data, but could not load
Regards,
Dilek

For Mapviewer questions, please post in the following forum:
MapViewer
Thanks

Initial Load of contract from ISU to CRM

Hi All,
We are working on the replication of contract from ISU to CRM.
We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
Since its without an error ,we are not able to figure out whats the error is.
Regards
Nikhil

Hello Nikhill,
Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
Could you help me please!!!
Thnks!!

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

OIM Initial Data Load - Suggestion Please

Hi,
I have the following scenario :
1.My client is currently having 2 systems 1.AD and 2.HR application.
2.HR application is having only Employee Information.(it contains information like firstname,lastname,employeenumber etc)
3.AD is having both employees and contractor information
4.Client wanted my HR application to be the trusted source but the IDM login ID of existing users should be same us that of AD samaccount name.
I am using OIM 9.0 and 9041 connector pack.What would be the best way to do the initial data loading in this case?.Thanks in advance.

Hi,
Can you tell me how do you relate employee in HR to corresponding record in AD.Then I will be in better situation to explain how you can do it.
But even without this information following approach will solve your requirment.
1.Do the trusted recon from AD.
2.samAccountName will be mapped to user id field of OIM profile.
3.Do the trusted recon with HR.The matching key should be the answer of my above question.
4.For trusted recon with HR remove the Action "Create User" on No Match Found event.
Hope this will help.
Regards
Nitesh
Regards
Nitesh

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

Need to Convert Comma separated data in a column into individual rows from

Hi,
I need to Convert Comma separated data in a column into individual rows from a table.
Eg: JOB1 SMITH,ALLEN,WARD,JONES
OUTPUT required ;-
JOB1 SMITH
JOB1 ALLEN
JOB1 WARD
JOB1 JONES
Got a solution using Oracle provided regexp_substr function, which comes handy for this scenario.
But I need to use a database independent solution
Thanks in advance for your valuable inputs.
George

Go for ETL solution. There are couple of ways to implement.
If helps mark

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Need to help in initial data loading from ISU into CRM

Similar Messages

Maybe you are looking for