Need to instance to be able to handle 30000 users.
Hi all,
I need to install oracle 10g release2 rdbms with one instance.Now the condition is this instance should be able to handle 30000 user sessions.Which parameters are directly responsible for number of user sessions.Precisely which parameters are to change to accept more number of users sessions.If you could suggest some value ..it would be helpful.
regds,
AD
Is that 30,000 concurrent user sessions?
Some of the considerations will be the type of load - DML intensive or query intensive. If short duration DML, then you may want to look at Shared Server as a method of reducing or containing resources. In which case dispatchers, circuits and shared server parameters are relevant.
If these sessions are concurrent, you may want to look at RAC to distribute the load across several host computers. IN which case the entire set of RAC parameters become relevant.
With 10g Release 2, you would possibly want to take advantage of the automatic memory tuning capability to get you out of detailed memory parameter management. Otherwise all parameters that involve the SGA and PGA, especially the pools, become relevant.
Other than that, the processes parameter and (the normally derived) session parameter are relevant.
IMO, the logical and physical design will have a significant impact on the number of users - possibly more impact than parameter settings. I refer you to Tom Kyte's books (see http://www.apress.com) to get a detailed discussion of scalable design.
Similar Messages
-
Setup single instance of Oracle B2B to handle both HTTP as well as HTTPS r
Hi,
I want to send 850 transaction to different trading partner who are using HTTP and HTTPS.I want to create a single instance of ORACLE B2b to handle both HTTP and HTTPS. Please do the needful.
Thanks and Regards
Srinivas kola
Edited by: user11342588 on Jul 15, 2009 3:15 AMHi Anuj,
Thanks for your response.But i want to do for both inbound and outbound, Given below is an example
OUTBOUND:
Host Trading Partner ------------------------------- Internet----------------encrypt message------------------>--trading partner1
Port no 50
------------------------------ Internet----------------encrypt message-------------------->trading partner2
------------------------------Internet----------------encrypt message-------------------->trading partner3
INBOUND:
Host Trading Partner ------------------------------- Internet----------------encrypt message-<-------------------trading partner1
Port no 50
------------------------------ Internet----------------encrypt message-<-------------------trading partner2
I want to use only a single instance of Oracle B2B to handle both HTTP and HTTPS
Help me please -
In other words, will it still be able to handle high powered engineering programs in 4 years? It's i7, quad core, 2.7GHZ boost up to 3.7GHZ,16 GB RAM, and 768 flash SSD.
Will it be considered a lower powered or mid powered machine in 4 years relative to the new laptops around it?
I feel like fully specking it helps me be a little future proof.
Is 6 years too ambitious to hope for that this machine will still be able to handle powerful programs?
I spent $3000 so in 4 years I hope it will still be relativley fast.Nobody can predict what programs might need in the future. And, nobody can predict where computers will head 3-4 years from now. Power (meaning energy consumption) is becoming as important as speed (if not more so). Purchase what you need now with a bit of headroom and expect that you might need to replace in 3 years (that's the reason large companies lease computers instead of purchasing them).
It also depends on what you mean by "high powered engineering programs". It could mean that you don't have enough memory for newer applications and will constantly be swapping to disk. This could either prevent you from using the SW or will significantly slow things down.
It could also mean that the computations become more complex and need a faster cpu (this is a lower risk and simply means that your computer won't be quite as fast as your buddy's).
It could mean that the OS you have today is obsolete and no longer supported for these applications.
Don't worry about 4 years down the road. Nobody (and I mean nobody) can predict even 1 year out. Look at how many times companies delay product introductions, or provide "guidance" to analysts. -
I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this? I'm going to be trying to move the date to a new imac 27' with fusion drive.
the following set of instructions is a little longer, so you might want to print it out and have it handy
Step 1 - PC
If your PC already is connected to the Internet, hold down the Windows button on
your keyboard and simultanously press R. Into the opening window enter "cmd" (without
the quotation marks). A command line will open, enter "ipconfig" (again without the
quotation marks) at the prompt. Now find the section labelled "Ethernet-Adaptor" and
note the values for IP-Address, Subnet-Mask and Default-Gateway on a sheet of paper
If your PC is not already connected to the internet, you need to manually configure its IP address.
open Network and Sharing Center
do a right click on Ethernet and select Properties
in middle of the screen there is a box labelled "This connection uses the following items"
out of this box select "Internet Protocol Version 4 (TCP/IPv4)"
click on the Properties button in the right corner
Into the window "Use the following IP address" enter the following values
IP-Address: 192.168.0.1
Subnet-Mask: 255.255.255.0
Default-Gateway is the IP-Address of your Router. This value is needed for internet connection, for the file sharing setup only this value can be left empty.
Step 2 - Mac
If your Mac already is connected to the internet, it is likely that it has automatically receive the necessary parameters from your router and therefore should be in the same network as your PC. To be on the safe side, you can check this by
open System Preferences
select Network
choose Ethernet from the panel on the left side of the window
click on Advanced
click on TCP/IP
compare the values for IP-Address, Subnet-Mask and Default-Gateway with those you wrote down earlier.
If both PC and Mac have identical numbers in the first three parts of the IP-Address, you are set.
If your Mac is not already connected to the internet, you need to manually configure its IP-Address as well.
In the TCP/IP window you have just opened select "Manually" from the drop down menu "Configure IPv4:"
Enter the following values
IP-Address: 192.168.0.2
Subnet-Mask: same as with PC
Default-Gateway: same as with PC
Step 3 - Activate File Sharing on PC
open Control Panel
select Network and Internet
select Network and Sharing Center
on the left panel select change advanced sharing settings
in the middle of the new page enable turn on file and printer sharing
Step 4 - Activate File Sharing on Mac
open System Preferences
select Sharing
set check mark next to File Sharing (green circle appears on the right side next to File Sharing:)
click on Options:
set check mark next to Share files and folders using SMB
in the listbox under the text Windows File Sharing make sure there is a check mark next to your account name
Step 5 - Create a share on your PC
In Explorer select the folder you wish to share
do a right click on that folder and select "Share with"
choose "Specific people"
a new window opens. there select your Windows username (usually the first in the list)
if you plan to copy from Windows to Mac only, it would be sufficient to grant Read permission only, but, since most likely you are the only person to access that share and certainly do not plan to sabotage yourself, Read & Write permission is ok too.
finally click on "Share"
Step 6 - Create a share on your Mac
Once the check mark next to your account name is set (see above) your home directory is automatically set as a share.
Step 7 - Connect your PC to your Mac-Share
do a right click on the network icon which resides on your desktop or in the left
panel of every Explorer window
Select Connect Share
in the text box next to Folder: enter \\<ip-address-of-your-mac>\<your-osx-username>
if you are using the same username and password on both Windows and OSX click on "Finish",
if not set the check mark next to "Connect using different credentials" afterwards click on "Finish" A new window will open where you enter username and password that you are using with OSX
Step 8 - Connect your Mac to your PC-Share
hold down the command key and press K simultanously or in Finder click on Go in the menu at the top of your screen and select "Connect to Server"
in the Window that opens enter smb://<your-windows-username>:<your-windows-password>@<ip-address-of-your-PC/<y our-windows-username>
or
smb://<ip-adress-of-your-PC/<your-windows-username> you will be asked to enter your Windows username and password in popup window
Now you have both computers connected to each other. Each will provide you access to your home directory of the other computer. Open a second Explorer or Finder window with your local home directory and start copying -
Will my computers specifications be able to handle photoshop?
I'm looking at buying photoshop but I've had some people say that I'll need to upgrade my computer, while otheres are saying it will be fine. Not being very 'tech savy', I was wondering if anyone would be able to help and let me know if my computer will be able to handle photoshop.
Currently it has:
Win7 Premium
4GB memory
500GB HD
Intel Pentium B940, 2.0GHz
any advice would be greatly appreciated. thanks
justinHi Juz12,
This is perfect for Photoshop cs6 extended and all previous versions.
your processor is also fine.
I am running core 2 duo , 4gb ram, 500 -
How ABAP proxies will be able to handle attachements
how ABAP proxies will be able to handle attachements.
my attachment in byte array formatthax abhishek ,
the like lets about sending the message as an attachment, can u help me out, after receiving an attachment in abap proxy, what are steps need to be done in abap proxy.
is there necessary that the receiver transport protocol should be HTTPS 1.0 -
Livecache database instance is not able to connect from DBMGUI
Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date Time PID Typ MsgID Label Message-Text
2009-06-12 03:10:43 2732 12902 XSERVER started, 'X64/SUN 7.6.04 Build 015-123-189-221'
2009-06-12 03:10:43 2732 12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732 12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732 12924 ENVIRON [1] start
2009-06-12 03:10:43 2732 12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732 12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732 12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON cpu time unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON number of processes 29995
2009-06-12 03:10:43 2732 12898 ENVIRON number of open files 2048
2009-06-12 03:10:43 2732 12898 ENVIRON core size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON file size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON heap memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON stack memory size 8192 KBytes
2009-06-12 03:10:43 2732 12898 ENVIRON virtual memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732 12898 ENVIRON PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732 12898 ENVIRON :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732 12898 ENVIRON IFS=
2009-06-12 03:10:43 0 0
2009-06-12 03:10:43 2732 12898 ENVIRON TZ=NZ
2009-06-12 03:10:43 2732 12898 ENVIRON TMP=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON TMPDIR=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON USER=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON LOGNAME=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34 137 12929 TASKING Task T114 started
2009-06-12 10:58:34 137 11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34 137 11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34 137 11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34 137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34 137 12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35 11 11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35 138 12929 TASKING Task T115 started
2009-06-12 10:58:35 138 11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35 138 11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35 138 11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35 138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35 138 12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36 11 11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36 139 12929 TASKING Task T116 started
2009-06-12 10:58:36 139 11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36 139 11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36 139 11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36 139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36 139 12827 COMMUNIC wait for connection T116 -
I have an iPad 2 and want to be able to design my own templates for invitations, labels, and such. What do I need to do to be able to do this? Apps??
Take a look at these three sites and you might find something in one that will work for you.
http://appadvice.com/appnn/2011/06/appguide-updated-vector-drawing-apps-ipad
http://jaevin.com/blog/2011/02/20/ipad-sketching-drawing-apps/
http://www.designer-daily.com/10-great-ipad-applications-for-creative-people-623 4
I downloaded iDraw - which is an Adobe Illustrator wannabe for the iPad. You can export to PDF and other formats using iDraw. iDraw also supports file sharing. File Sharing is the iPad/iTunes way to send files back and forth from the iPad to your computer and back again.
This site will tell you about iDraw.
http://www.indeeo.com/idraw/
This is a link to iOS File Sharing which you will find useful as well.
http://support.apple.com/kb/ht4094
There are third party apps in the app store that will allow you to use virtually any printer even if you don't have one of the HP AirPrint compatible printers.
You can even use an app like Pages to create your templates. You can insert art and photos into Pages and it supports file sharing as well. Pages is a Word Processing app and I would be inclined to not use it for your purposes but it will work for some basic designs however it's certainly not ideal for creating artwork.
http://www.apple.com/ipad/from-the-app-store/pages.html -
I'm just wondering if my printer will be able to handle that thick of paper without ruining the quality of the print. I've been trying to find the paper thickness limitations for this printer but I can't seem to find them anywhere.
You can refer to the link below for the paper sizes and types supported by this printer here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02291053&tmp_task=prodinfoCategory&cc=sg&dlc=en...
I work for HP. -
I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.
-
I am a new iPad owner with Mac OS 10.4.11 on my desktop. Currently I have iTunes 9.2.1. What do I need to do to be able to sync my iPod settings in iTunes to my new iPad? The newest version of iTunes says I can't install it since it requires 10.5 or later.
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
I have Mac OS X 10.5.8, what do I need to do to be able to be able to install itunes 11.1?
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
Options if you cannot upgrade: iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there. Backup your device directly to iCloud over a wireless connection. Photos can be downloaded from the Camera Roll using iPhoto or Image Capture. -
Why aren't apps like weather, stocks, etc. on my new iPad? Also, It's curious that Siri wasn't included with ios5... Shouldn't an iPad 2 with the A5 be able to handle it?
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
I am planning to buy apple air mac book. i am not that technical will i be able to handle apple mac book. i am aware of using windows os but can i get software like that of notepad, word pad in os X lion. can i get partitioning in macbook,
Yes. Switching to Mac might be overwhelming at first, but it is not difficult. I Just started using Macs regularly about 9 months ago after using only Windows based pc's for over 15 years. Macs come with TextEdit , but you can also purchase MS Office for Mac or use Apple's version, called iWork.Yes, you can partition the hard drive of a Mac. Read these also: http://www.apple.com/support/switch101/, http://www.apple.com/support/mac101/. With regular use of a Mac, you will be able to use it without even thinking about it, just like how you learned to use a WIndows pc.
-
10g Streams able to handle lots of data?
Does anyone know if 10g Streams is able to handle large amounts of data? For example, millions of rows inserted by a batch data load? Or, 4000 tables being updated at the same time? 600 users on source db?
BTW, both databases will be Oracle 10g but source will be a RAC and the destination won't. Also, source database uses ASM disks but destination doesn't.Hello,
Here is a simple example, of course here I only create one value per iteration in the while loop for simplicity. You can also set properties of the file which can be useful, and set up different channels.
Beside, you can use multiple groups to have more flexibility in data storage. You can think of channels like columns, and groups as sheets in Excel, so you see this way your data when you import the tdms file into Excel.
I hope it helps, of course there are much more advanced features with TDMS files, read the help docs!
Maybe you are looking for
-
Changing the size of a jbutton inside a jtable
Hi, I have found this example for adding a jbutton to a jtable: http://forum.java.sun.com/thread.jspa?forumID=57&threadID=715330 however, I have cannot seem to figure out how to set the size of the jbutton. Currently, the jbutton is filled to the siz
-
People Search and a Custom Property
I am trying to surface a custom property in the people search query results. For example, http://<servername:port>/_api/search/query?querytext='*'&sourceid='B09A7990-05EA-4AF9-81EF-EDFAB16C4E31' I get XML results but when I look at the properties ret
-
Vertical Black Bars On Composition During Export
Once finished with my composition, which contained several layers, I began the export process...only to find vertical black bars on each side of the composition. My project was set-up as 1080p. I read that changing it to 720p would resolve the issue.
-
PP MRP order consume fcst question
here is an example:CTO1 and CTO2 has the same structure(history reason)and we plan on both CTO CTO1 CTO2 fcst 100 100 after get orders: CTO1 CTO2 fcst 100 100 order 150 10 since CTO1 order will only c
-
Never ending problems with extreme connection to express
I have an Apple Extreme that is about 5 years old along with 3 newer (1 - 2 years old) and an Apple TV which I bought last year. All units are N compatible. I use one extreme for extending my network, one for wireless printing and one for audio. I