Need to replace my DVD drive please help

I need to replace my DVD drive for my Power G5 (bought in 2002), is ATAPI the right connector?

Ok, I have bought one as suggested, I thought there have 2 types of cable connectors i.e. ATA or IDE. Will try to replace it later today when I finish from the work

Similar Messages

  • Problem with DVD drive, please help

    Hi people, please read the whole story and give me some advice.
    Last Friday, took the train from Stoke on trent to Birmingham to get to Apple at the bullring as the DVD drive is not recognising DVDs. Everytime I put a dvd in, the blank dvd message comes up! They told me they can replace the drive, but it will take a few days unless I pay for Apple pro care, as I needed it done quick, I paid, I roamed around the shops waiting for the phone call that it is ready. After an hour, got a call saying that the NEW DRIVE they have in stock is faulty, so I came back, they told me that they will call me when they get another one in stock. Went back home after having wasted a day in birmingham.
    Monday, got a message on my voicemail, the drive is in stock, pop in and we'll replace it. As I was working all week, I thought I'd give them a ring to arrange for the repair on Saturday where they can fit me. I tried to call all week, THE BULLRING STORE DOES NOT ANSWER THEIR PHONES!
    So, I popped in today, they said that they cannot do it today as they were busy. I asked to see the store manager and explained to her the situation and how annoying it is not to be able to get in touch with the store. She told me she'll get it done before closing time.Luckily by 2 pm it was ready, picked up , hopped back on the train to stoke. Got home tried a DVD, it works, then suddenly STOPS WORKING.
    The Macbook now doesn't recognise the drive at all, and I've got a DVD stuck in it.
    I have wasted another day in birmingham + train fares + Apple pro crae (79.99). I am very frustrated, I am now having second thoughts on the quality of apple products. If the matsui drives are crap, why don't they get another manufacturer to make it for them.
    I would appreciate your help on what should my next move be, I cannot keep loosing my time like this, I paid good money for this kit and I need it to work.

    http://www.which.co.uk/reportsand_campaigns/consumer_rights/reports/your_rights/buying_selling/Returning%20fau lty%20goods/Returning_faulty_goods_report_6576571.jsp
    Have a read of this article. You definantely should be able to get a full refund (whether they will do that is a different matter).
    If you don't ask (firmly) then you don't get. A 12 month warranty is there for a reason so use it. I can't believe they've actually charged you for work already within the 12 month period. I have also being trying ot look for an article about claiming unfair travel to and from a shop for repairs but I cannie find it.....
    Would you consider asking for a replacment laptop. From what I have read on the forums, if you call apple they will be more likely to help out, maybe give them a try and avoid Birmingham all together.
    ps, i'm from Stoke too -Small world eh?

  • I need to replace the dvd drive in my touchsmart iq505. where can i buy the part?

    I am having trouble finding the replacement part for  my touchsmart iq505 dvd drive.  the original one is no longer working. is this part still being made or can i replace it with something more recent?    thanks!
    This question was solved.
    View Solution.

    Hello clevermom,
    I understand you are looking to replace the optical drive in your HP TouchSmart IQ504 Desktop PC. The optical drive you are looking for is no longer supplied by HP, but I do have information that will allow you to get it elsewhere. The optical drive is "8X SuperMulti Slimslot SATA interface DVD-ROM optical drive - Form factor 12.7mm height, read all CD-ROM medai and DVD-RAM discs", and I have fouhd several available on the internet by searching by the Part Number 467613-ZH1.
    I hope I have answered your question to your satisfaction. Thank you for posting this question on the HP Forums. Enjoy your weekend!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • A quick question concerning replacing the DVD drive in a HP pavillion dv6-2057cl

    I need to replace the DVD drive in this dv6 and I am wondering if there is any wiggle room when it comes to the replacement drive.  Can I use another HP disc drive with a similar model # or am I restricted to the "identical" drive?
    Some quick info follows:
    OS = Windows 7 home premieum (32bit)
    The drive pulled out of the laptop:
    Super Multi DVD Rewriter
    MODEL: GT20L
    FW        : DC05
    HW       : A2
    TYPE    : AMCK702
    CT : 7AXVK012GY3NRY
    HP mPC PN : 461646-6C2
    S/N :
    {Removed for privacy}
    MANUFACTURED : OCTOBER 2008
    I have found a replacement with the same "Model #" and same "HP mPC PN" however it was manufactured in 2009 and I do not know if the placement of the SATA connection on the rear of the drive matches up or not.
    Any help is much appreciated!!!!!!
    Thank you,
    DaFlash
    This question was solved.
    View Solution.

    It looks like the part number is the same. As long as the part number is the same, it is essentially the same part and should work without any issues. The only time that part may not work is if the part number is different. If any part is different from another part (firmware, hardware, etc.), it will have a different part number. As long as 461646-6C2 is the same on both, there shouldn't be any issue with replacing the drive.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB

    Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB could you please help !!

    You can replace it with a solid state drive, see the one OWC sells here.  The video on how to install it is here.
    iFixit.com has used hard drives available here.
    If it were me, I'd go with a solid state drive, as the prices have come down recently and the performance improvement is noticeable.

  • Do I need to replace my Hard Drive?

    My Mid 2012 13" MacBook Pro recently was not able to boot on startup when I reset the NVRAM. I looked on the commands and there was something to do with a hard drive error. I had to reinstall OS X for me to use it again.
    Since then my computer has been unusably laggy at times and performance has dropped. YouTube and other videos will lag uncontrollably and Minecraft runs at about 1 FPS. I am also running bootcamp and problems are consistent on Windows 7 as well. Do I need to replace the Hard Drive or just completely reformat it and reinstall OS X from a bootable disk?
    THANKYOU

    You shoudn't consider replacing your drive unless you know that's the problem. AHT, to the best of my knowledge, does not do surface scans on drives and it can't tell you if you have bad sectors. It can, however, identify other problems so running tests on the system might help you.
    Other things to consider are the following:
    How much free disk space do you have? If you're running out of disk space the system will not be able to swap out properly or easily and your system will bog down.
    How much memory are you using? If you're using a lot then swapping will be rampant and your system will slow down.
    Are there problematic applications that don't work properly that are consuming too much memory or hitting your system with a lot of disk reads and writes?
    If you're using Mountain Lion, have you upgraded to 10.8.4? If not, do so. A lot of your problems may disappear.
    The easiest way to check the first 3 above is with Activity Monitor. You can find a good write up on it with the following link:
    http://www.scsc-online.com/Activity%20Monitor.html
    I'm sure there are others on the web that are every bit as good as well. If you're still convinced your drive is the problem then check out this link for a list of drive testing tools:
    http://forums.macrumors.com/showthread.php?t=1544280
    That list is pretty much the web's de facto standard list of reliable hard drive testing tools currently available for Macs, and it's reasonably up to date, unlike some of the other lists on the web that are 5 years old or older. I really wouldn't assume it's the drive until you check out other stuff first.
    Good luck, diddypants.

  • How can I get a replacement internal DVD drive?

    I bought a refurbished Toshiba P55t-A5202 a few months ago.  The internal DVD drive seems to be failing and doesn't always recognize dual-layer DVDs.  Some DVDs recognize and play fine.  Others aren't even detected and the system thinks no disk is in the drive.  I would like to replace the opical drive.  I am comforable opening up the sytem and swapping the drive, I just don't know where to buy the replacement part.  
    Does anyone know who to contact about getting a replacement internal DVD drive?

    Hi, and welcome to Apple Support Communities.
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Apple may not have the replacement discs at this point, but it's worth a try. You could try giving Apple a call and see if they have them available. If they do, they will send them to you for a fee.
    You will need the serial number of the iBook when you call.
    http://support.apple.com/kb/TA27282?viewlocale=en_US
    Good luck.

  • I have a HP G71 Model#G71-329WM. I need to replace the optical drive. What is the part Number?

    My HP G71 Model#G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct Part number? Thanks
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c01713747.pdf
    Replacement optical drives with HP part numbers can be found in Chapter 3, page 33.
    You can also read the instructions in chapter 4 on removing the drive and getting the part number off of it which will be normally found on a white sticker.  A 6 digit-3 digit part number (123456-001)
    You can search by the part number on eBay for a used but working device or you can probably buy one new from HP by entering the part number at the link below.
    http://h20141.www2.hp.com/hpparts/Default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96
    Paul

  • HT2604 I can't instal software from applications instal DVD! please help me!

    I can't instal software from applications instal DVD! please help me!

    hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
    Thanks so much

  • Replacing a DVD Drive

    I posted this in the Tecra forums and received no replies.  I have two of these rascals and was wanting to swap the drives to see if one was defective.  Every laptop I have messed with, the drives will slide right out w/o any force if all of the correct screws are removed. 
    I have a Tecra M7-7311 that I need to get the DVD drive out of.  I have looked thru the user guide but cannot find a schematic of the correct way to remove the actual drive.  I found one screw, but the drive doesn't seem to want to come out easily - so I am assuming I have missed one or more screws somewhere else.  Can anyone help me?

    I've just got a line drawing to look at, but it looks like the latch is as you described, a small thing at the back of the drive.

  • I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    Hello Huss87bash,
    This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Need inputs regarding the dvd drive on primary ide channel.

    Specs:
    Motherboard: MSI P35 Neo3 (MS-7935 1.0)
    CPU: Intel Core2 Duo E6550
    Memory: Team Elite DDR2800 (2x1GB Dual Channel)
    Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
    Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
    Graphics card: Gecube HD3870
    Chipset: Intel P35/G33/G31 (Rev. A2)
    Southbridge: Intel 82801IB (ICH9)
    LPCIO: Fintek F71882F
    BIOS: AMI V1.1 (11/07/2007)
    Hello,
    Almost all new motherboards today only have a primary ide channel and the rest are SATA.
    I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
    I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
    Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
    Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
    I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
    I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
    Thank you for any replies.

    Thanks sir NovJoe for the reply.
    Just received the solution from another forum where I posted the same problem.
    They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
    Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

  • I lost my ipad and i need the serial number and IMEI , please help me how?

    i lost my ipad and i need the serial number and IMEI , please help me how?

    If you have registered your device, you can go to https://supportprofile.apple.com/ and log into your apple id.  Your devices appear there with serial numbers.
    Additionally, your serial number is included on the original receipt when purchased at any Apple Online or Apple Retail store, or any Authorized Apple Reseller.

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

Maybe you are looking for

  • Access Denied Error While invoking WebService Method

    Hi, When i am trying to invoke web service method from client machine, it throws an Error 401 - Access Denied (Detail Error Shown below).... Please let me know to set WindowsAuthentication UserName and Password in WebService calling through Java. Her

  • Error while creating service entry sheet

    Hi Experts, I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE'  for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnn

  • Attributes passed in HTTP Header but not received in my application!! Help

    Hi all, I am running Sun Directory Server 5.2, Access Manager 7.0 and Policy Agent 2.1 on an IBM Websphere 5.0 web server. I am using a "shared" authorization model where I am using the AM only for the authentication part. The way my application is s

  • GF FX5200

    Okay. I'm having a problem with a program that came with my FX5200... Hope you can help me here or direct me to who can. It's the media center deluxe II. When I install the program it goes well for a while then has a self registration error that says

  • Data entry type in array of clusters

    Hi i have 4 column array of cluster X Y Z & Data entry Type  X+Y=Z simply I wanna do this  when i entry x; data type cell will auto X (not numerical value just "X") when i entry z; data type cell will auto Z  Then i can build my algorithm. How can i