Need to update remote trail file seqno from source
Experts,
i need to change the remote trail file seqno to different no other than 0 from the source side.
i tried delete rmtrail and add with like below
add rmttrail /opt/app/pdfdfs/ggs/trails/rddf1dfd/rg, extract ext, seqno 4670
seems like it is not working and trying to read from 0 itself. as i dont have access to target db i cannot alter the replicat there. please suggest
Hi,
I think you are trying to add the rmttrail with a different seqno than 0.
By default when the the rmttrail is been added like below and started
add rmttrail /opt/app/pdfdfs/ggs/trails/rddf1dfd/rg, extract ext
In the target it will start creating files like rg000000
In your case, you are trying to get it created with a different number.
Let's assume that you have trail files till rg000014 and so you want the new trail file to be created as rg000015
if so then you could use the following command
add rmttrail /opt/app/pdfdfs/ggs/trails/rddf1dfd/rg, extract ext, seqno 15, rba 0
This will help to create files with sequence rg000015.
Hope this helps.
Thanks,
Praveen jacob
Similar Messages
-
Do I need to put these .pxml files under the source control?
I use Jdeveloper created portlet consumer. after I run it in Jdeveloper, there are lot of .pxml files generated as metadata.
Do I need to put these .pxml files under the source control? or they will be generated at run time?
ThanksYup. Keep your mds folder under source control as well.
-
In ERPI 11.1.1.3 Admin guide its mentioned we need to update the below , do we need to do the same in 11.1.2.2 version also
Updating the snpsagent.conf File
ä To update the snpsagent.conf file:
1 Navigate to the folder where Oracle Data Integrator is installed.
For example, C:\OraHome_1\oracledi\tools\wrapper\conf.
2 Using a text editor, open the snpsagent.conf file.
3 Search for: wrapper.java.library.path.1.
4 On a new line, add the following text:
wrapper.java.library.path.2=../drivers
5 Close and save the file.
Updating the Windows Environment Variable
After you update the snpsagent.conf file, add the ODI drivers path information to the
Windows environment variable.
ä To update the Windows environment variable:
1 On the desktop, right-click My Computer, select Properties. Select the Advanced tab, and then click
Environment Variables.
2 In the System variables section, select the Path variable, and then click Edit.
3 At the end of the Variable value line, add a semi-colon (;), and then add the Oracle Data Integrator
driver path.
For example, C:\OraHome_1\oracledi\drivers.
4 Click OK three times.
5 Restart the Oracle Data Integrator Agent Service.
ThanksYou should not have to do this in ODI 11.1.1.6 for ERPi 11.1.2.2.
-
Need to update Exchange 2010 to SP1 from base
I need to update my base install of Exchange 2010 to SP1 and eventually SP2. This sits on a 2008 R2 server. in reading other upgrade articles, there are references to needing hotfixes at the server level - 2008 R2. There are about 5 hot fixes referenced
to upgrade to SP1 and I would assume there are a few others for the update to SP2.
Currently the 2008 R2 server is patched via Windows update through February 2014 (including SP1 for the server). Given that, can I assume that the hot fix updates have been incorporated into other updates/patches along the way for the Windows 2008 R2
server? Or do i still have to install each of those hotfixes manually?
Also, in one of the patches, it spoke of needing, or using .net framework 2.0 and 3.51. currently my system has 4.5.1 on it. do i need 2.0 and 3.51 for SP1 to be installed and work correctly?
thanks
daveHi Dave,
I recommend you install Exchange 2010 SP3 directly. There is no need to upgrade to Exchange 2010 SP1 and then to SP2.
Service Packs are cumulative, Exchange 2010 SP3 include all fixes included in previous RUs and service packs. Here is a blog for your reference.
Released: Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Since Windows updated through February 2014, you don't need to install each of those hotfixes manually.
Besides, I would like to verify if you download .net framework 4.5.1 from website. There is no need to install it that way. You just need to open Server Manager, add .Net Framework 3.5.1 feature.
Hope my clarification is helpful.
Best regards,
Amy
Amy Wang
TechNet Community Support -
HT202443 Need to update the sample file only of my iBook
How can I update the sample file of my iBook?
Seems that if I update from iBooks Author it will replace the book by the open sample.
In iTunes Loader or iTunes Producer I do not see any options to update.
ThanksHello GoldSpanner,
This can be done using the 'Consolidate files' function in iTunes.
iTunes 11 for Windows: Change where your iTunes files are stored
http://support.apple.com/kb/PH12365
Cheers,
Allen -
Hi, I need to insert my photo onto a profile page of an external website. Trouble is that the jpeg file is 4.4 and it needs to be reduced to 2 mb. I have tried everything that I can think of but nothing has worked. I'm not very computer confident, so if anyone can support me on this, I'd welcome the help.
Open the photo in the Preview application and click Save As... in the File menu. Its size will be indicated near the bottom of the resulting dialog box. Move the quality slider until the size you need appears, name the new file and select the location where you want to save it, and click the Save button.
-
Need to update information to our WebDB from our ERP DB
Hi All,
We need to be able to udpate information from our oracle eBusiness ERP system out to our Web Store DB (Both Oracle 10g 10.2.0.4 DBs). The data we are trying to sync is inventory, pricing, product data, etc. The issue is that some of the data (inventory primarily) has to come from some complex views that contain function/procedure calls to get at actual quantity (available to reserve). So I believe a materialized view is out.
I was just wondeirng how others would approach this problem? I could bulk collect the deltas and use forall to udpate....write to a temp table, etc? Any thoughts?
Any ideas/suggestions are very much appreciated.
SThe only way a view is kept up to date is by making changes to the table(s) on which it is built.
There is nothing you have stated, so far, that rules in or out materialized views.
I just read your newest and original post and there is wholly insufficient information, no DDL, no DML, to really understand your issue.
Please provide an example (code) of what you are asking about. No matter how good Oracle technology ... it still doesn't let us see
your monitor. <g> -
File transfer from source to destination location using 11g b2b
Hi,
I have a requirement where I need to transfer a file(custom file format) from a source location to a destination location using 11g b2b.
The problem here is I can't use any composite to push data to b2b, it has to be through b2b configuration alone.
If i understand correctly, delivery channel (in this case transport protocol is FTP) is defined for a trading partner and we specify the hostname,destination folder etc in the transport protocol parameter.
Is there a way I can specify the source location anywhere in the B2B configuration screens so that b2b understands what is the source and destination location to transfer the file.
Steps that I have followed:
1. created remote trading partner
2. created document definition for a custom file format
3. Configured Delivery channel for the remote trading partner.
4. Created an agreement.
Is there anything else I can do to solve this problem.
Regards,
SatrajitHi Nitesh,
Thanks a lot.
I tried with Generic file and the file is getting picked up from the source location but its not getting delivered to the destination.
Checked file permission in the destination and its fine, files can be created there. Also, checked the reports section and saw those messages in error with
Error Code: B2B-50014
Error Level: ERROR_LEVEL_COLLABORATION
Error Text: General Error
Steps I have followed:
1. Created Internal Listening channel
Protocol: Generic File-1.0
Folder Name: Important.txt
Folder Name: /home/applvis/dev/Inbound_dir and specified it as internal.
This is working fine as file is getting picked up from the location
2. Created Delivery channnel for the remote trading partner.
Protocol: Generic File-1.0
Folder Name: /home/applvis/dev/Outbound_dir
Filename format: Ship_%FROM_PARTY%.txt
3. Created and deployed the agreement.
Am I missing any necessary step here?
Regards,
Satrajit -
Update Audit Trail in CUP from an External IDM Solution
Hi,
We are doing an external IDM integration with CUP 5.3 SP7. Our design include gathering some approvals in the IDM solution before forwarding the request to CUP for some additional approvals and provisioning.
We are trying to use the SAP delivered webservices like:SAPGRC_AC_IDM_SUBMITREQUEST for the request submission. In an effort to keep the entire audit trail in CUP, we are exploring means to send the IDM approval/audit trail to CUP so that an Admin can login to CUP to get the entire request history. Does anybody know how can we get this achieved? Is there an API /WS that can be used to update the Audit trail in CUP along with the submission of a request?
We know there is one WS which provide the audit trail from CUP to IDM but not the other way !
Thanks for your inputs,
Regards,
AnilThe following 2 webservices may be able to help you:
Inbound (from IdM to AC) Web Services (available with Access Control 5.2 SP04+):
Audit Trail (includes the Provisioning Log Web service) SAPGRC_AC_IDM_AUDITTRAIL
This Web service returns a comprehensive audit history. It enables IdM to retrieve an audit log from
Access Control (for ERP provisioning) as well as provide an audit history of user provisioning to
Access Control.
Outbound (from AC to IdM) Web services (available with Access Control 5.3):
Audit Trail (includes the Provisioning Log Web service) SAPGRC_AC_IDM_AUDITTRAIL_FROM_IDM
This Web service returns a comprehensive audit history. It enables Access Control to retrieve the
audit log from IdM (for non-ERP provisioning) as well as an audit history of user provisioning to IdM. -
Need to update price of price list from dtw
Hi all
Can any one provide me the way , How to update price of price list through DTW ??
Thanks
RickyHi Recky,
Please check below threads.
SAP B1 9.0 Price Update with Excel import
DTW - Problems trying to update prices | SCN
How to upload price for a item in price list us... | SCN
Hope this help
Regards::::
Atul Chakraborty -
Im unable to stop the ipod recovery mode
Just what did the message say?
Just what did you do?
Kust what can't you stop? -
Flat file conversion from source to destination
Hi
I'm new to SAP and was wondering if someone could help me with the following:
Have a source text file (fields are FirstName and LastName) and would like to run it through PI and get an output as a flat file with the FullName and LastName concaternated.
Example:
SourceFile.txt:
Jason
Gates
TargetFile.txt:
Jason Gates
The mapping is working if I test it using the test feature in Enterprise Services Builder's test mapping feature without any files.
How can I execute the mapping using plain text flat files?
Thanks in advance!
Additional information:
Source file has structure:
First Name
Last Name
Target file has structure:
Full name
The object is to:
u2022 Create data, message, service interface structures for source and target to represent the source and target.
u2022 Create the mapping program between source and target.
u2022 Test mapping works internally in the builder using the internal test facilities.
u2022 Configure the directory to pick up the source file, and content covert to xml using sender file channel
u2022 Configure receiver determination, interface determination, receiver agreement, and target file channel
u2022 Test using files place on the file server
u2022 Trouble shoot using the runtime work bench.
u2022 Once this work, increase the complexity e.g. multiple people in the source file, etc
Edited by: NetSpike on Feb 17, 2010 2:25 PMhttps://wiki.sdn.sap.com/wiki/display/XI/FLATFILETOFLATFILE
-
Determine if writing to a local or remote trail
I have recently been tasked with taking over the GG implementation at my company and am hoping there is a simple answer for my question.
I am concerned we are not following practice and writing directly to a remote trail file but I am not sure how to prove this.
What is the "give away" or how can you tell if you are writing to a remote file directly or local trail file?
This is on an 11.2.0.3 Oracle database.The network call is due to the fact that you are using a remote trail versus local trai for the Extract. The parameters RMTHOST and RMTTRAIL are telling the Extract to connect to that host (even though it's local) over the port specfied by MGRPORT. This in turn causes the Manager to take the call over the port and then pass it off to a process called a Server Collector. If you just used the parameter EXTTRAIL in the Extract and created the trail as an EXTTRAIL rather than a RMTTRAIL, then there wouldn't be any network for the Extract to negotiate, it would just write the trail out locally on the server (even though it's also doing that with the remote trail since you've got the RMTHOST as the local server anyway).
A Pump (not the same as Oracle Datapump) would normally handle this if the target db server were different than the source.
And even if you do add DB4 to the mix on Box2, you can also add a Pump process that reads the same trail that the Replicat is reading and you wouldn't need another Extract.
I'll map it out as if you have this setup:
Box1 has DB1 and DB2
Box2 has DB4
Extract1 for DB1 on Box1 writes to Exttrail ./dirdat/et
Replicat2 for DB2 on Box1 reads from Exttrail ./dirdat/et and delivers transactions to DB2
Pump4 for Box2/DB4 on Box1 reads from Exttrail ./dirdat/et and writes to Box2 to Remote Trail ./dirdat/rt
Replicat4 for DB4 on Box2 reads from Exttrail ./dirdat/rt and delivers transactions to DB4
With a configuration like this, you can always add more Pumps on Box1 to read from Extract1's local Exttrail ./dirdat/et and send those to other target servers. In fact, Pump4 can also write to mulitple target servers at once, although it would be best to have 1 Pump write to 1 target server, again to reduce Abends due to the network. -
Updated Camera Raw File for CS2 / Canon Powershot G10
I am still using Photoshop CS2, but unfortunately I need the updated Camera Raw file (v5.6) for use with the Canon Powershot G10, and it appears the unless I upgrade to CS4 I won't be able to view any RAW files shot with this camera.
Is there an updated Camera Raw version for the Powershot G10 that is still supported under CS2?
Thanks!
Message was edited by: lgldsr712....Sorry, just realized I placed this in the incorrect Forum. :-(lgldsr712 wrote:
…I need the updated Camera Raw file (v5.6)
ACR 5.4 was released last night and it requires CS4. That is the latest and current version of Camera Raw.
5.6 probably won't appear until next year.
If you download the free, stand-alone Adobe DNG Converter 5.4, you can convert the raw files from your camera to raw DNG files you can then open in ACR 3.7 hosted by CS2. -
STMS - transport .SAR file downloaded from SAP notes
Hi,
I have download .SAR files from SAP Support Portal and have used SAPCAR.EXE to unpack it.
As the result, I have 2 files: K123110.L6B and R123110.L6B.
I copied these K123110.L6B to my DEV server \usr\sap\trans\cofiles
and R123110.L6B \usr\sap\trans\data
I would like to transport it from DEV server to QAS server.
So, I logon on to DEV --> STMS, I clicked on the "Transport" logo,
then double click the DEV server.
Then, at the menu bar, I goto Extras --> Other Requests --> Add and
enter Transport Request: L6BK123110
But, there is an error message:
<b>Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile</b>
I guess I must miss out some steps, can anybody guide me?
I need to update the SAR file to my QAS server.
thanks in advance.
best regards,
ying yingHi,
Please send the files to ur Basis guy. they will upload it to the server.
And also read the documentation of the OSS notes there they mention it.
Thanks
Shiva
Maybe you are looking for
-
Open and close a vi front panel dynamicall​y
I created a main vi panel that display all the signal names. I like the main vi to open a new plot screen when I double click on the signal name. I was able to do that using invoke node. But I when I close the plot screen by clicking on the Window
-
How to send support message in solution manager?
Dear All: I need a guilde or document can show me how to configure the service desk in solution manager ...like how to set up a support team and how to send the sopport mesage to SAP and role setting thanks Regards Jack Lee
-
BI 7 Inventory Transformations 0IC_C03
Hi, any body implemented Inventory managment in BI 7 flow. we are implemenating Inventory managment in BI 7 flow. issue is when installling transformations most of the keyfigures are not mapped, do we have to map/ write rouitnes, content will not giv
-
Belkin Flip KVM Switch and Blue Screen
G5 Dual 2ghz, clean install of Leopard. I have a dual head video card, attached to the DVI port is a 22" monitor connected via DVI, on the ADC port I have ADC to VGA adaptor which a Belkin "Flip" KVM switch is attached, leading to a 17" monitor. On b
-
Need challenge response for old 1020 router.
Hello, A colleague of mine has an old 1020 async router. Needs to do password recovery per below Cisco doc. Complete these steps in order to recover a password: From the console, log in to the Cisco 1020 Router with user name enable and password over