Need user exit and runtime structure to get all the unsaved entries in CAT2

Hi Friends
As per our requirement, we need to compare all the entered hours from CAT2 vs Project level assigned hours.
If user save the record in CAT2, then no problem.I can get the records from CATSDB table.If user enter the record in first week and goes to next week without saving time entries in CAT2, Runtime structure catsd_imp-sumdays in user exit CATS0009 shows the current screen hours only.But I want to get all the entries entered in CAT2(Unsaved records).Is there any other user exit or badi available to get this functionalites.I tried with CATS0006 ,CATS0003 and so many user exits.But still I didnt get any solution for this.
If anyone come accross this kind of scenario,kindly help me on this.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 1, 2010 2:24 PM

Hi
I didn;t find any badi for this transaction , check this onc CATS0010 once.
Regards
Siva

Similar Messages

I updated my 4S iphone and now I am getting all the texts from another iPhone on my plan. How do I stop this?

I updated my 4S iPhone and now I am getting all the texts from another iPhone on my plan. What do I need to do?

I'm not completely clear on the GSM / LTE network frequencies in US vs Argentina, but I do know that cross-compatibility can be an issue when buying from one country and using in another. Apple products in particular have this problem. What this sounds like to me is that the phone is not compatible with Argentinian networks; or your friend had an AT&T phone and jail-broke it. This is against the end user licensing agreement, and when the phone is next updated is likely to jam the phone.
Sorry but you lost your money.
Wasted*

I have a old firefox data file from a computer transfer i did and i want to get all the bookmarked sites i had orginized how can i do this?

so a while back i transfered my old computer files to my new computer and when i did that i tried getting my firefox books marks added when i did it it just made a file old firefox data. i went into it it has the books marks but the problem is it isnt really readable kinda jumbled up and i wanna know if i can import it to my current one or somehow get it organized so i can at least see them apart or on a note pad just each bookmark on its own line? i added a picture of what it looks like

Backing up and restoring your Profile should have included your bookmarks.
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
As far as working with that file in {like} NotePad goes:
A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
Or try using an online JSON editor like this, to try to display only the "uri" field.
https://www.jsoneditoronline.org/

HT5624 I just updated the software on my iPad and now can't get all the open files to close as I used to in older version. When I double-click the round button, the open programs show up, but I can't hold down to have the "x" appear to close them. Help.

I just downloaded the updated software and now can't shut down open programs like I used to by holding downthe round button, having them appear at the bottom of the screen, holding them down for the "x" to appear and then closing them by clicking "x". I can get the program icons to appear, but don't know how to shut them off now.

Swipe up or drag up on the app window to close the app.

Hi i want to become storng in user exit and bapi

hi experts.,
i want to become strong in the area of user exits and badi's .
please send me the documents for it ,
Thanks in advance.
Regards,
Hitu

Hi Hitu,
Check these links..
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Regards,
Younus
Reward Helpful Answers:-)

I bought a new laptop how do I sync my ipad and get all the files synced to my old laptop

I bought a new laptop. Can I sync my ipad to it? And how do I get all the files that were synced to my old laptop?

Do you still have your old computer with your media (music, films, etc) on it so that you can copy them over from it ? If you do then there are a number of methods on this page for how you could copy it over from it : http://support.apple.com/kb/HT4527
If not, and if you don't have your content elsewhere (e.g. music that wasn't bought from iTunes), then there are some programs listed half-way down this page for how to copy content back from a device : https://discussions.apple.com/docs/DOC-3991
For iTunes downloads you should be able to copy them from your iPad via File > Devices > Transfer Purchases
Also see this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
If you want to copy files/documents from the iPad then how you do so depends upon what app that they are in and what the app supports e.g. file sharing on the Apps tab in iTunes, transfer via your wifi network, email, dropbox etc

Need User Exits for Creation of Delivery and for Posting Goods Issue

Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
Mindaugas

In the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael

To get the user exits and modification points

Hi Experts,
I am able to find all user exits for a particular transaction,but is there a way to find it for some specific actions alone.
Need to find the user exits and enhancement points that are called while clicking a specific button in a standard transaction.
Your help is highly appreciated.
Regards,
Sridevi

Hi
To find out the userexits at position where you need you should see the description of the USER EXIT.If you find that it is close to the point where you want then put up a break point inside it and re - run the transaction.
Also you can check SDN post to find out your user exit.
FOR BADI -
1 )You can put breakpoints at method GET_INSTANCE of class CL_EXITHANDLER and CALL FUNCTION statements.
2) You can run through SPRO transaction for the particular Functional area and understand the available exits or BADIs .
Regards
Gaurav

Help with BDC, user exits and BAPI

Hello all:
1) I posted a question before about BDC documentation and people sent me lot of helpful material. Thanks to all of them. I am very new to ABAP coming from VB background and wondering if someone can tell me how to practice one simple BDC program starting from scratch. What do I first need to do to get started? I have Mini WAS 6.20 test version and like to practice BDC programming.
2) What are user exits and BADI and can anyone provide some documentation and sample code if possible.
Thanks everyone in advance.
--Mithun.

Hai Mithun Dha
Go through the following Documentation & Example Code
Just check these links.
Diff. between LSMW & BDC?
BDC SESSION
CALL TRANSACTION
CALL DIALOG
What is BDC or batch input
The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.
BDC functions:
E BDC_OPEN_GROUP : Opens a session group
E BDC_CLOSE_GROUP : Closes a session
E BDC_INSERT : Insert a BDC scenario in the session
E The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.
It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.
The object itself is maintanable through the transaction SE24.
BDC methods:
Method
Description
Parameters
OPEN_SESSION
Opens a session
SUBRC (Return Code ? 0 OK)
SESSIONNAME (Session to be created)
CLOSE_SESSION
Closes a session
None
RESET_BDCDATA
Resets the BDC Internal Table...
None. Normally, for internal purposec
BDC_DYNPRO
Handles a new screen
PROGNAME (Name of the program)
DYNPRONR (Screen Number)
BDC_FIELD
Puts a value on the screen
FIELDNAME (Name of the field)
FIELDVALUE (Value to be passed)
CONSTRUCTOR
Constructor - Initializes NO_DATA
NODATA (No data character). The constructor is called automatically when the object is created.
RUN_SESSION
Launches a session with RSBDCBTC
None
CALL_TRANSACTION
Calls a transaction with the current BDC Data
MODE (Display Mode)
UPDATE (Update Mode)
TCODE (Transaction to be called)
BDC_INSERT
Inserts the BDC scenario in the session
TCODE (Transaction to be called)
BDC techniques used in programs:
1) Building a BDC table and calling a transaction,
2) Building a session and a set of BDC scenarios and keeping the session available in SM35,
3) Building a session and lauching the transaction right after closing the session.
BDC using Call Transaction
BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP
program. The process involves building an Internal BDC table containing the screen information needed to
execute the required transaction and then passing this to the Call transaction command (See code example).
The full procedure for creating a BDC program is as follows:
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
BATINPUT/DIRECT INPUT
A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.
GO THROUGH THIS LINK
http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm
check with this code
include bdcrecx1.
tables : mara.
data : begin of it_mara occurs 0,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
maktx like makt-maktx,
meins like mara-meins,
end of it_mara.
start-of-selection.
perform upload_data.
perform open_group.
loop at it_mara.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
it_mara-matnr.
perform bdc_field using 'RMMG1-MBRSH'
it_mara-mbrsh.
perform bdc_field using 'RMMG1-MTART'
it_mara-mtart.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
it_mara-maktx.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
it_mara-meins.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
perform close_group.
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'c:\mat_bdc.txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = it_mara.
IF SY-SUBRC = 0.
SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " upload_data
flat file structure is
PRANIT_011 CCOUP This is Testing material kg
PRANIT_012 CCOUP This is Testing material kg
PRANIT_013 CCOUP This is Testing material kg
PRANIT_014 CCOUP This is Testing material kg
PRANIT_015 CCOUP This is Testing material kg
when your selecting views
this particular material will belongs to Po/Sales or some other areas .
when you select basic 1 --it gives description
select basic 2 -- it gives tax ,amount, base unit of measurement
BDC TO BAPI
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
For User Exits
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
Creation of Field Exits
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press eF1f for field-level help.
Click on the eTechnical infof pushbutton (or press eF9f) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the eContinuef pushbutton.
- Now, you will be able to create the function module associated to the data elementfs field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the eContinuef pushbutton.
- In the eFunction modulef field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elementfs field exit must be created without an identifier.
- To create the function module, click on the eCreatef pushbutton, choose menu path Function module -> Create, or press eF5f.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing eEnterf, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modulefs attributes screen, click on the eSource codef pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exitfs function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the eAssign prog./screenf pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the eFld. Exitf field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to eActivef and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Thanks & regards
Sreenivasulu P

Need user-exit ....

Hi Gurus,
In vendor line item display(FBL1N) ,when i'm changing Reference no. by going through the Display doc. header button...and save it ,,,it will update in BKPF table......
But for some purpose of mine i need to update in RBKP table
(Invoice header)...So pls. anybody tell me what is user-exit for this purpose.....
Good point will be rewarded...........................

Hi Samalendu,
Check the code posted by me ,to get the list of User exits and Badi for a particular tcode in the link mentioned below.
Re: User Exit for IW22 - to populate custom fields
Hope it helps.
Manish

User Exits and VOFMs

I am looking for a document that suggests coding practices and rules that should be followed in User Exits and VOFMs in SAP R/3. Like value the variable XKWERT with the desired value in Pricing Condition Formula VOFMs, or never read an SAP defined internal table into the header line. Things like that. Does any one know of such a document?

Hi, this may help you.
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
VOFM is the transaction where you can maintain Requirement routines, which are assigned through cusomization.
To create a routine you need access key & routine no. starts with "9".for ex. 901,902 etc.
one important thing to note that even if you have some syntax errors inside your routine, it will get activated without errors. So, you need to do Main Program check before activation.
Refer to SAP Note no : 327220,381348,156230.
goto VOFM tcode for wrting the Routines
from menu Requirements-> pricing
You can create the pricing related routines here
Use the Number from 900 only
take the acess key and try to copy the existing routine and change the code to your requirement and keep a break point and see
Activate it before execution
Reward If Helpfull.
Regards Madhu.

Need User exit or BAdi for VF01

Hi.
I need User exit or Badi for VF01.
Condtion: After Successful Save of document number in database.
Please help me.
To be reward all helpfull answers.
Regards.
Jay

Hi
The follwing user exits and badis available:
                                                                                Enhancement
V05N0001
User Exits for Printing Billing Docs. using POR Procedure
V05I0001
User exits for billing index
SDVFX011
Userexit for the komkcv- and kompcv-structures
SDVFX010
User exit item table for the customer lines
SDVFX009
Billing doc. processing KIDONO (payment reference number)
SDVFX008
User exit: Processing of transfer structures SD-FI
SDVFX007
User exit: Billing plan during transfer to Accounting
V61A0001
Customer enhancement: Pricing
V60P0001
Data provision for additional fields for display in lists
V60A0001
Customer functions in the billing document
Business Add-in                                                                                SD_CIN_LV60AU02
BADI for billing
VOR_WA_FAKTURA
Billing before Goods Issue
If it is helpful rewards points.
                     Regards
                      Pratap.M

Need user exits material

hi.,
This is satish we requesting to all. I need user exits materials. It is very important me so please any one send the link or pdf file.
thanking you all

Please see the following program. This helps you to find user_exits...
Start -
REPORT ZFIND_USEREXITS .
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
*--End--
Hope this`ll work .
Thanks

Need User Exit/Badi in ME31K to override value of EKPO-XERSY

Could someone please tell me if a user exit or badi is available to override the value of EKPO-XERSY on the conditions tab in transaction ME31K?
We have created a customer field in SRM and wish to override the backend value of the ERS indicator in the ECC system.
Thanks in advance for any help you can give me.
Edited by: Mary Culpepper on Feb 12, 2008 11:15 PM

Hi Mary,
Write the code in the below exit:
EXIT_SAPMM06E_013 :Update Customer-Specific Data in Purchasing Document
Here get the value of XERSY from YEKPO structure.
Thanks.
Note:Reward Points if you find useful.

User Exits and conversion from 2.3-4.5

Hi All,
I am trying to modify the old (2.3)Oracle Ship Confirm screen, basically create a new front end that does not require too much navigation/key strokes by the user, and to accomplish this have converted the 2.3 form to 4.5. However, the form uses USER EXITS, and I am unable to locate them anywhere after the conversion. At runtime I get the error, 'FRM-40800 User Exits FND does not exist'. Does anyone know what happens to User Exits, what trigger they go to, when converting from 2.3 to 4.5? Where are they usually located on the system (ie, Oracle_HOme directory), or even if USER EXITS created by Oracle can be modified. THanks!

Hi All,
I am trying to modify the old (2.3)Oracle Ship Confirm screen, basically create a new front end that does not require too much navigation/key strokes by the user, and to accomplish this have converted the 2.3 form to 4.5. However, the form uses USER EXITS, and I am unable to locate them anywhere after the conversion. At runtime I get the error, 'FRM-40800 User Exits FND does not exist'. Does anyone know what happens to User Exits, what trigger they go to, when converting from 2.3 to 4.5? Where are they usually located on the system (ie, Oracle_HOme directory), or even if USER EXITS created by Oracle can be modified. THanks!

Need user exit and runtime structure to get all the unsaved entries in CAT2

Similar Messages

Maybe you are looking for