Net use map drive is working with built-in admin account only

I currently have a windows 7 PC that I use
net use in cmd file to map drive to Windows server 2008.
It works if I use built-in admin account/password but I've tried another account that's in the administrator group on the server and I get errors.
NET USE X: \\IPADD\c$\inetpub\ftproot password /User:adminuseraccount
NET USE X: \\IPADD\c$\inetpub\ftproot password /User:server\adminuseraccount
After tweaking the net use command a number of ways, the 2 following errors are what I'm getting for the most part:
System error 1219 has occurred.
Multiple connections to a server or shared resource by the same user, using more
than one user name, are not allowed. Disconnect all previous connections to the
server or shared resource and try again.
OR
System error 5 has occurred.
Access is denied.
I've looked at many searches on this but can't get this to work.
Also, one thing I'm thinking of doing is changing the built-in admin name and password. Is this a safe thing to do?
Thanks,
Dave

Hi,
Can you check this link?
http://support.microsoft.com/kb/938120
Thanks,
Umesh.S.K

Similar Messages

Am using 2007 iMac running 10.4.11. Do not wish to upgrade now. Where can I find an external hard drive to work with it? Also need a printer?

I'm using a 20" iMac that I purchased in 2007. It's running OS 10.4.11, and still doing beautifully. But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago, copied everything I wanted at that time on to it. When I tried using the h.d. a few days ago it was garbled. Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

Mapping editor not working with Java 5 classes

I have a small protoype web service which I wrote using Tomcat/Axis/Spring/Hibernate and using EJB3 annotations for the mappings. I want to port the persistence layer to Toplink.
I installed Toplink 9.0.4.1 and added the toplink libraries to my project and implemented the DAO and the spring bean defs.
I opened the mapping editor and created a project. When I try to add classes to it for mapping I get an error that it can't find the classes (even though I selected them from the chooser). I figured it might be that they were compiled with Java 5, so I switched the JRE_HOME in setenv.cmd to my Java 5 JRE. Now I can import the classes and see the attributes but when I click on any of them in the Navigator panel, the editor panel remains blank. If I now try to save, I get:
java.lang.NullPointerException
     at oracle.toplink.workbench.ui.tools.CheckListModel.getRowCount(CheckListModel.java:119)
     at javax.swing.JTable.checkLeadAnchor(JTable.java:2949)
     at javax.swing.JTable.tableChanged(JTable.java:2993)
     at javax.swing.JTable.setModel(JTable.java:2827)
     at oracle.toplink.workbench.ui.tools.CheckList.initialize(CheckList.java:47)
     at oracle.toplink.workbench.ui.tools.CheckList.<init>(CheckList.java:26)
It seems that the mapping workbench doesnt work with Java 5. What should I do?

Ah, I see. I saw another post here stating that must use 10.1.3.

Why won't my secure thumb drive (FAT32) work with os lion?

Why won't my secure thumb drive (FAT32) work with os lion? I have used it ok with older mac operating systems. When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly. It shows as readonly in Finder. When I try to eject it, the spinning wheel appears and I have to relaunch finder.

Hi princessmonsta,
Thanks for using Apple Support Communities. This article has some information on things to check if your sound is not working as expected that may help:
OS X Mavericks: Adjust your computer’s sound output
http://support.apple.com/kb/PH13908
Cheers,
- Ari

Configure Macbook Pro with one hard drive to work with FCP

I would like to do some video editing while on the road. I have a new Macbook Pro with Final Cut installed. I know that the capture scratch should not be on the same hard drive as the application. How do I set up the computer to work with FCP when I have only one hard drive. I do have external hard drives to use when editing at home but I would like to edit while traveling in the car or on a plane.

If you don't have an external drive attached, FCP will default to the system drive. The CAPTURE SCRATCH folder will be located in the DOCUMENTS>FCP DOCUMENTS folder. You CAN edit on the system drive, but performance might suffer and you might get dropped frames. DV, OFFLINE RT are fine, HDV and other formats might give you headaches. I have edited DV and OFFLINE RT HD on my laptop's hard drive on a plane without much problem.
Get a bus powered hard drive like the G-Raid Mini. This way you only need one power source.
Shane

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

I have a MDD dual 1.25ghz processors and I would like to know which sata drives will work with the Sonnet Seria ATA pci card?

Which sata drives will work with the Sonnet Tempo Serial ATA card?

Pretty much any of the SATA 3.0 Gbps drives.
Western Digital Black and Blue and Hitachi 7K drives are all good choices.
If you try a SATA 6.0 Gbps drive, it will need to be jumped to limit to SATA 3.0 Gbps.

[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

Hello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network...

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278?
I see all these options and I would like to know proper dimensions and speed:
SATA III (6 Gbit/s)
SATA II (3 Gbit/s)
SATA (1.5 Gbit/s)
PATA (IDE)
mSATA
PCI Express
Thanks!

Thanks! It looks like Sata III is the way to go and most are happy with this one:
Samsung 840 EVO
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3 W1726/ref=sr_1_1?s=pc&ie=UTF8&qid=1396894663&sr=1-1&keywords=ssd+2.5

HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

my voice call services is not working with cellular network...only works fine with wifi..please help?

Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Anyone worked with customizing the requisition account generator workflow?

Has anyone worked with customizing the requisition account generator workflow?
please let me know
I need help asap.
thanks

Hi Malla,
Solution here:
http://garethroberts.blogspot.com/2007/08/gl-account-code-combinations-on-fly-key.html
Regards,
Gareth

Microphone works with Utube and iTunes but only with earphones for games and Facebook

Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

Does Hard Disk Drive Camcorder using MPEG2-PS format work with iMovie6?

Considering purchasing a Sony DSR - SR 82 Camcorder with a Hard Disk Drive using MPEG2-PS format. I read in the Missing Manual that MPEG-2 generally does not work with iMovie.

Hello Luv2Curl,
I read in the Missing Manual that MPEG-2 generally does not work with iMovie.
That is correct. MPEG-2 video needs to go through a lengthy and lossy conversion process in order to be imported and edited in iMovie. You'll be better off getting a MiniDV camcorder - it works natively with iMovie and the video quality is better as well.
hope this helps
mish

GPP Shortcuts using Mapped Drive Paths

I have been using Group Policy Preferences to map drives to a network share. I then have a number of shorcuts created to items on that network share using the fixed drive letter.
So for example Shortcut1 points to L:\program\program.exe. Mapped drives were used rather than unc paths for a number of reasons.
This works correctly with XP SP3.
On a Win7 client the shorcuts are not created and event log shows:-
'0x80070002 The system cannot find the file specified.'
I'm guessing the order in which the preferences are applied may of changed in Win7?

I'm having the same issue here. Win 7 SP1 Ent Workstations, Windows Svr 2008 R2 AD And tested successfully ONLY under a domain admin account. It appears the Policy and the GPP Shortcut functionality does work at least in a very specfic
scenario. Anyone still working on this or monitoring this thread? If no, I'll start my own new one.
Policy looks like this:
Action: Update:
Name: C:\Users\Public\Desktop\<Shortcut Name>
Target type: File System Object
Location: <Specify full parth>
Target path: Z:\<Path to desired folder>
Arguments: <Blank>
Start in: Z:\<same path as target>
Shortcut key: None
Run: Normal Window
Commment: <Blank>
Icon file path: Z:\<same path again>\Library.ico
Icon index: 0
Common tab has only "Run in logged-on user's security context (user policy option) checked.
Drive Mappings are done by login script .bat file containing simple Net use commands. And drive is confirmed connected on login. Users have a mix of modify and read\execute only rights to the target folder. The GPO is security filtered to
limited test users, specfically identified here, not by group membership.  Regardless, the two of those accounts are my own, one a standard, and the other my domain admin account which has full control of the folder. The only user
for which this policy implements correctly, is my Domain Admin account.
For all others I have the following in the event viewer:
Log Name:      Application
Source:        Group Policy Shortcuts
Date:          5/14/2012 3:08:26 PM
Event ID:      4098
Task Category: (2)
Level:         Warning
Keywords:      Classic
User:          SYSTEM
Computer:      <Omitted>
Description:
The user '<GPO Policy Name>' preference item in the '<GPO Policy Name> {6ABB0D0E-20BB-4B24-944C-7AD442E75262}' Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Group Policy Shortcuts" />
    <EventID Qualifiers="34305">4098</EventID>
    <Level>3</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-05-14T19:08:26.000000000Z" />
    <EventRecordID>465937</EventRecordID>
    <Channel>Application</Channel>
    <Computer><computername></Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>user</Data>
    <Data>Caspian Compliance Manual</Data>
    <Data>Caspian Compliance Manual {6ABB0D0E-20BB-4B24-944C-7AD442E75262}</Data>
    <Data>0x80070005 Access is denied.</Data>
</EventData>
</Event>
and
Log Name:      Application
Source:        Group Policy Shortcuts
Date:          5/14/2012 3:08:26 PM
Event ID:      4099
Task Category: (2)
Level:         Warning
Keywords:      Classic
User:          SYSTEM
Computer:      <Omitted>
Description:
The client-side extension could not log RSoP data because it failed with error code '0x80041002 Not found'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Group Policy Shortcuts" />
    <EventID Qualifiers="34305">4099</EventID>
    <Level>3</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-05-14T19:08:26.000000000Z" />
    <EventRecordID>465938</EventRecordID>
    <Channel>Application</Channel>
    <Computer><computername></Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>0x80041002 Not found</Data>
</EventData>
</Event>

Net use map drive is working with built-in admin account only

Similar Messages

Maybe you are looking for