Netflix application storage error N8011

Greetings,
I have been searching for information on an issue my daughter is experiencing with Netflix on her MacBook Pro c2009. I have read many things in this issue, but have not found a true fix. Perhaps you can help.
When she starts a movie, instead of the movie playing she receives the following error: Application Storage Error N8011. It tells her that Private Browsing is enabled and instructs her to turn it off or call Netflix. However, Private Browsing in not enabled. I have played around with Private Browsing and am fairly sure this is not the issue.
The few things I have found in discussions on the net (suggestions that Netflix is not compatible with Safari 5, instructions to reinstall Silverlight, and making a new user account) have not provided a solution.
The suggestion that Netflix is not compatible with Safari 5 might have been relevant some time ago, but it clearly is not "the" issue because I am able to use Netflix on the same computer using a different account.
I have removed Silverlight and reinstalled it without any noticeable effect. Again, Netflix works with my account on the same computer. And Silverlight is a shared plugin, it does not need to be installed by each user.
The "fix" that I found repeated a few times is to create a new user account (named "test"). This does work, but it is a work around. It is NOT a "fix".
I believe the issue is related to an account permission or perhaps a Safari user configuration, but I have not been able to uncover anything in this light.
The new account I created as a work around does not have Admin privileges, but Netflix does work with that account. This reduces the range of possible causes.
If you have had a similar experience and have found the solution, please share it.
Thanks!

Thanks for your reply Klaus1.
The link you sent does not work: Error 404 - Not Found
I think the url you meant was:
http://www.engadget.com/2010/06/07/how-to-re-enable-netflix-in-safari-5/
I had seen this page and tried it, but reverting to version 4 did not help the affected user account. Besides, Netflix is working with version 5 on a different user account on the same computer. For these reasons I'm pretty sure the version 5 thing has been resolved.
By the way, the info in the above link is really cool. I had no idea there was a way to revert Safari to prior versions. Apparently this is a feature for developers to test their web pages in different versions of several browsers - Cool!
Back the to point, I'm curious how many people have experienced this N8011 issue with Netflix. By the dearth of info on the web addressing this problem, I'm guessing it is not very common. But it is real, no the less.
Any help would be appreciated.

Similar Messages

How do I correct the silverlight application storage error to watch netflix movies?

I get a Silverlight application storage error when attempting to watch an instant netflix movie. Following instructions of error message does not correct. Instant movies play properly with Explorer - but not Firefox.

o resolve this error, you will need to update Silverlight application storage:
1. From within the Silverlight player, right click.
2. Click Silverlight.
3. In the window that appears, click the Application Storage tab.
4. In the next window, click the "'Enable application storage" checkbox.
5. Click the "Delete all' button.
6. Click Yes.
7. Click OK.
8. Click your browser's Refresh or Reload button to continue.

Silverlight - Give generic Error, closes when you click on application storage - Windows 8

Silverlight errors on websites and won't load bubble test.Also if you go into silverlight settings and click on application storage it doesn't open the box below just closes.
I've tried deleting the file that saves silverlight cache, fix-it tool, registry cleaner and reinstall. Silverlight still won't load on windows 8 machine.

Tricky one really.
I work in businesses where the desktop set ups are well known.
I'll try and offer some suggestions since you have zero replies.
Kind of unsurprising though - there should be some sort of consumer orientated support somewhere rather than the only option being developer forums.
If you try that bubble site I posted and it doesn't work then Silverlight is broken or you're using it in a browser it's just not going to work in. ( That's just a random Silverlight site I found by the way ).
Exactly what error do you see?
The default browser settings for IE 11 stop my Silverlight business apps working, but there's a relatively friendly warning.
You're using the desktop version of internet explorer? If it doesn't have a house star and cog top right and looks all metro then it's not desktop.
Other browsers are unreliable to fatal.
Sounds like you did this:
https://support.microsoft.com/kb/2608523/en-gb?wa=wsignin1.0
You definitely have windows 8 pro?
It is never going to work on win rt. I never saw anyone trying to install on win rt so I don't know what happens but neither the plug in or the Silverlight .net framework work on win rt.
Other than that.
Good luck.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

Imac G5 (pre isight). Mass Storage Error

I have an imac G5 (pre-isight). Using Tiger. Recently it has been playing up. Two main problems: starting up and waking after sleep mode.
*Starting up issues*
There doesnt seem to be a consistent problem here. Sometimes it hangs on the grey apple screen, sometimes grey probitory sign screen. Sometimes it hangs on a black screen with white writing. On about the 10th to 20th time of rebooting, it seems to startup and work fine.
*Sleep issues*
If I leave the computer to go into sleep mode, it tends to freeze in whatever application is open. Especially Safari.
I have tried numerous fixes. I've reset PRAM, done the SMU thing. Repaired and verified disk many times. Repaired and verified permissions. I've archived and installed and archived and erased. There's barely any software on here apart from the operating software and MS Office (legal). I'm using an apple keyboard (wired) and a wired mouse. There's no important info on here so am happy to wipe everything.
Finally i did a hardware test and received a "mass storage error" (only appeared for the extended test)...
2STF/8/3: S-ATA Bus 0 –Master
Having looked up several forums i replaced the hard drive. (Made sure it was compatible, similar size and same specs as original). Reinstalled software and got all the latest updates. Seemed to be working quite well for a day or so, although there was a few 'permissions' error which seemed easily fixed.
Today i awoke the imac and it had frozen. Back to it's old tricks. Tried restarting and got grey screens, black screens etc. Repaired permissions. Ran another hardware test and getting the same error message about mass storage!
So if it's not the hard drive, what's wrong for my imac? Is it time to just dispose it?
Thanks in advance for any ideas you may have.

The recall ended many moons ago, and it's a capacitor problem, they all need replacing, those in the power supply as well, probably.
If you are handy with a soldering gun, have steady hands and are good at repairing electronics, you can do it yourself. Look at [welovemacs.com] or [synaptech.com] for parts and advice.

Application Storage - Free memory is zero

Need URGENT help for my mobile issue ( Model 9220 Curve ) - Application Storage - Free memory is zero
( Tried reaching Blackberry Support in India - NO RESPONSE )
1. Getting Supplimentary Service failure : General Error - Comes on re-booting this device
2. No free memory despite removing many application > 100 MB - despite status is same
3. Application Storage , there is in "Others " - which is using 240 MB , besides " System " & " Applications "
4. Un-intalled ARM ( not deleled ) but could install again , in order to debug and isolate issue , as there is not enough free space.
5 . Tried " Hard & Soft " Resets
Suggest !

Make a full backup then do a security wipe on the device.
http://www.blackberry.com/btsc/KB14058
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

MSExchangeTransport critical storage error and recovery

Hi All,
Yesterday, I received the following error on one of my Hub Transport servers and I'm not sure if there is any action I need to take from this point:
"MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:D:\Transport Queue is moved to directory path:D:\Transport Queue\Queue.old, and directory path:E:\Tranport Queue Logs is moved to directory path:E:\Tranport
Queue Logs\Queue.log.old."
At this time, I also received a few alerts that Forefront had timed out while scanning some messages and that resources on the machine were limited.
Did I lose any data when this automated recovery occured? What does the message mean by: "This recovery action will not be repeated until the target folders are renamed or deleted"
What is considered the Target folder? The "old" location or the new location? I am currently running Exchange 2010 SP1 RU2.
Thanks for your thoughts!

Hi
I just find this eventid – 17102 relevant to this.
If the Queue.old directory already exists and a recovery is attempted then the following error is reported in the Windows Application log:
EventID: 17102
Description: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. %2 Where %1 is the database instance name, %2 is a list of the path changes
To resolve this issue simply delete or rename the contents of the Queue.old directory and restart the MSExchangeTransport service. Please finish recovery process. I can’t say whether you lose data.
Please check it by yourself. But I don’t know why you meet this kind of error.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hardware Test Error Message - Mass Storage Error code ata 1/6/8 HD: 2,0

I have an imac 15" flat Panel, 700 MHz . after getting the flashing question mark, running or trying to run all the standard tests, (pram, Software Restore, disk repair, reinstall, kernel repairs) I never see the hard drive or volume. I saw it was a maxtor HD with 0 bytes at one point.
I now ran the Apple Hardware Test think I lost the Hard Drive...this is the feed back:
Airport- Passed
Logic Board - Passed
Mass Storage - Error Detected
Memory - Has Not been Run yet
Modem - Device Found
Video RAM - Has not been run yet
Error Code ata 1/6/8 HD: 2,0
Could anyone help me diagnose the issue? I think I can replace the HArd Drive myself, if I knew this was the problem and what I need to buy to replace.
Thanks,

I have a different take to a brody having replaced my hard disk and opened my iMac G4 up several times. Many people find that Apple Authorized Service Providers tend to give extortionate quotes for such repairs. Feel free to get a quote yourself. I'll provide the same advice I've given to many many other Apple Discussions users who have successfully replaced their hard disk themselves.
The iMac uses a standard desktop PC hard drive. It is 3.5" wide and in the iMac G4 uses the IDE connection. The iMac 700MHz 15" has an ATA66 bus so can use ATA66, ATA100 or ATA133 drives but not ATA33 or SATA. You should buy a 7,200rpm drive with a cache of 8Mb or higher as this also increases the speed over the original 5,400rpm drive installed so you should get a performance increase.
Here is a list of suitable hard drives.
It's pretty fiddly to work inside an iMac G4 so you must be very cautious. Always take anti-static precautions. Here are three options for guiding you through the procedure:
MacWorld
xlr8yourmac
Service Manuals
I've also taken a fair few photos which you can find here.
I'd advise reading the reports on the xlr8yourmac's drive database so get other people's experiences first.
You must replace the Thermal Paste when you close the iMac up or it will overheat.
It's probably worth replacing the PRAM Battery whilst you're in there as these have a finite life (once they fail to re-charge you may start to run in to snags - it's only a $5 part).
The hard disk should be set to Master (link).
Some iMac G4 700MHz users have reported that they are unable to address hard drives larger that 128GB, there is an application called SpeedTools that can be used to overcome this addressing limitation.
You might also give consideration to installing a 512MB PC133 DIMM or an 18x DVD±RW Dual Layer burner whilst you do this update; both of which will have to be removed during the process.
You must be very careful around the video connector in the iMac; it really is very fragile. In fact there is no need to touch it at all in my experience.
It is possible that the ATA controller on the iMac's logic board has failed rather than the hard disk. Given the cost of the logic-board it would not be cost-effective for an iMac G4 700MHz.
Let us know how you get on.
mrtotes

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

I get a "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" error every time I try to open a new tab.

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/777191]</blockquote><br>
Just like the title says, starting with Firefox 4 Beta 6 or 7, I forgot. Any time I try to open a new blank tab (sometimes even when I start up Firefox and the app tabs load) I get an error that says "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" If I close it everything works as normal again (until I open a new tab) but it is very annoying to have to do this. Is there any fix for this or is the bug just still there?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

HFM Application Library error Null while deploying the validated app

Hello,
I am trying to deploy a HFM application on EPM 11.1.3 and when I right click on the application in Application library of EPMA, I am getting a pop-up with the following error:
Application Library Error
null
Please note:
1. This is a EPMA managed HFM application.
2. The validation of the application is successful.
3. Deployement errors with the above error.
4. It is on Windows 2003 server with MSServer as the RDBMS.
Please help me resolve this issue.
thanks,
Ankit

Hi Ankit,
This would be normally resolved by Restarting the EPM Services and also remember to restart the Calculation manager services as well.
Once the services are restarted try deploying the application again to see if it deploys successfully.
Hope this helps,
Thank you,
Charles Babu J

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I'm all of a sudden getting a ( Java Script Application "download error" message) when trying to use Ant Video Downloader. What could cause this?

When an FLV is playing and I want to download it. I click on the Ant download button. A little window appears reading ( Java Script Application "download error" message)

This works for me on YouTube.
Cancel the download and then immediately right click and choose retry.

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

Netflix application storage error N8011

Similar Messages

Maybe you are looking for