Network Devices: id 11009 Error in SNMP GET response from IP Address:, Status: noSuchInstance(129).

Hello,
I'm having this error since i started monitoring network devices. Currently i have 14 Network devices (Cisco Switch). I have the SCOM 2012 R2.
The same error appear for a lot of workflows:
OID: .1.3.6.1.2.1.2.2.1.12.10609
Workflow name: System.NetworkManagement.MIB2_ifMIB_dot3Ethernet.Port.InputPacketBroadcastPct
Workflow name: System.NetworkManagement.DeltaRule.MIB2.NetworkAdapter.ifInNUcastPktsRate
Workflow name: System.NetworkManagement.MIB2_dot3.NetworkAdapter.HighOutputErrorRate
Workflow name: System.NetworkManagement.MIB2_Base.NetworkAdapter.InputPacketDiscardPct
Workflow name: System.NetworkManagement.MIB2_ifMIB_dot3Ethernet.Port.HighInputBroadcastRate
OID: .1.3.6.1.2.1.2.2.1.18.11104
Workflow name: System.NetworkManagement.MIB2_dot3.NetworkAdapter.OutputPacketErrorPct
Workflow name: System.NetworkManagement.MIB2_dot3.NetworkAdapter.HighOutputErrorRate
Workflow name: System.NetworkManagement.DeltaRule.MIB2.NetworkAdapter.ifOutNUcastPktsRate
System.NetworkManagement.MIB2_Base.NetworkAdapter.HighInputDiscardRate
Anyone knows a solution? This is generating a lot of alerts. What can i do to stop this workflow?
Thanks,
Rui

Hi,
If we can find the corresponding device according to the OID, and then we could override the monitor or rule for this specific device.
And here is a similar thread about how to monitor Cisco device based on OID, please go through it:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5e806aa2-c90d-4b39-9ef2-4cfc003e68ff/snmp-monitor-based-on-oids?forum=operationsmanagerauthoring
In addition, have you tried the possible resolution for event 11009 as below in the link I provided in my first post:
Possible Resolutions
Stale Discovery Data – Device has been reconfigured since the last discovery and Operations Manager is attempting to monitor a component that no longer exists on the device.
If the device doesn’t support the workflow, then a solution is to disable the workflows utilizing the value for the device. This will prevent these workflows loading and failing in the future.
Possibly a device issue, try updating the Firmware and OS on the device
Possible a discovery issue where the instance is being discovered incorrectly. For example Operations Manager is expecting to monitor a performance counter but this is a virtual interface and the counters are not present for the interface. Try
running a re-discovery for the device.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Error: Request failed. unexpected response from server. the status code of response is '0' in safari browser

Hi,
I am using Javascript serializer to send server side code to javascript.
This works in IE 9, Mozilla, chrome. But fails with error in Safari as "request failed. unexpected response from server. the status code of response is '0' . status text of the response is ". null
My code is as below:
<asp:UpdatePanel ID="panLayout" runat="server">
<ContentTemplate>
<div id="divloadingImage" >
<br />
<asp:Image ID="imgLoading" runat="server" ImageUrl="/images/rotate.gif" ImageAlign="Middle" />
<br />
</div>
<div id="banner-fade" >
<ul id="carousel" class="bjqs">
</ul>
</div>
<asp:Timer ID="timerRSS" Interval="1" runat="server" ontick="timerRSS_Tick"></asp:Timer>
</ContentTemplate>
</asp:UpdatePanel>
In CS:
protected void timerRSS_Tick(object sender, EventArgs e)
DisplayImages();
divloadingImage.Visible = false;
bannerfade.Visible = true;
timerRSS.Enabled = false;
private void DisplayImages()
List<SharePointListItem> allImages = GetallImages();
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(allImages);
string script = string.Format("<script type=\"text/javascript\">var allSliderImages={0}</script>", json);
if (!this.Page.ClientScript.IsClientScriptBlockRegistered("clientScripts"))
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScripts", script, false);
string scriptRegister = string.Format("<script type=\"text/javascript\">FetchData();</script>");
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScriptData", scriptRegister, false);
In Javascript:
function FetchData() {
if (typeof allSliderImages !== "undefined") {
for (var i = 0; i < allSliderImages.length; i++) {
Imagesuccess(allSliderImages[i].fileleafref, allSliderImages[i].filedirref, allSliderImages[i].caption1);
var rota = $("#bannerfade");
rota.css("display", "block");
function Imagesuccess(fileLeaf, fileDir, UserCaption1) {
var ul = $('#bannerfade > ul');
var li;
var filename = fileLeaf;
var dir = fileDir;
var caption1 = UserCaption1;
var sfils = filename;
filename = dir + '/' + filename;
var imageCaptionData;
if (caption1 != null && caption1 != "") {
imageCaptionData = '<div class="HeadlineDiv">' + caption1 + '</div>';
li = $('<li>' + imageCaptionData + '<div class="SubHeadline" style="color:white;">' + '<br/></div>' + '<img src="' + filename + '"/>' + '</li>');
ul.append(li);
$('#bannerfade').bjqs({
height: 354,
width: 970,
responsive: true
Below is the data I get:
<script type="text/javascript">
var allSliderImages=[{"id":"1","Title":"Scenic","caption1":"scenic","fileleafref":"02.jpg","filedirref":"/s/Test/Library"},
{"id":"2","Title":"nature","caption1":"scenic2","fileleafref":"C034.jpg","filedirref":"/s/Test/Library"},
{"id":"3","Title":"Tiff","caption1":"Tiff","fileleafref":"test_tiff.tif","filedirref":"/s/Test/Library"}]</script>
The data is shown in all browsers except Safari. How to fix this?
Update: I have checked this link: http://sharepoint.sureshc.com/2013/07/unexpected-response-data-from-server-in.html
but that did not help.
Thanks

Hi,
From
this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
with this issue:
http://forums.asp.net/
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

Network device is not responding to SNMP

Hello All
We are monitoring our first network device (Cisco FW) SNMP V2.
We discovered it and were able to collect performance counters for 2 hours.
After that, only thing we can collect is ICMP response. Also it keeps switching between healthy and warning state.

Hi Helpful guy,
This problem occurs on some network devices in case that the maximum number (default 50) of OIDs that OM will query per batch is too high. You probably find a entry in the Cisco logs:
"incoming SNMP request (# bytes) from IP address
IP_ADDRESS and PORT
PORT_NUMBER Interface "inside" exceeds data buffer size, discarding the SNMP request"
This problem can be solved by creating a registry key:
location: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Modules\Global\SNMP]
key type: DWORD value
key name: MaxOidsPerRequest
default: 50
Change the default value to one that suits your environment.
Hope this helps,
Regards Marthijn van Rheenen
Blog: Heading To The Cloud’s
I'm using OpsMgr 2012 R2. I started with MaxOidsPerRequest set to 30 and monitoring was going well for two ASA 5510s. I have raised the number to 40 and am waiting to see if there are any issues. It is a decimal value and I set it on both
management servers in the resource pool for network devices.

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

How to get response from an asynchronous BPEL process in Java

I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
"org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.

Clemens,
That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
To call the async BPEL process I have the following procedure:
initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
What I did so far:
- I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
- I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
EndpointReferenceType replyTo = new EndpointReferenceType();
// callback service running on local machine
// This URI class is the java.net's version
URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
// This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
AttributedURI address = new AttributedURI();
// the only public methos that made sense to me:
address.set_value(replyToURI);
replyTo.setAddress(address);
// call the BPEL process
myPort.initiate("test123", replyTo, address);
But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx.

How to get response from such a function

How to get response from such a function (in MODULE USER_COMMAND_0010 INPUT I get "ODGOVOR" 'X'
FUNCTION Z_SEENKRAT.
""Local Interface:
*" EXPORTING
*"     REFERENCE(ODGOVOR) TYPE MSEG-KZEAR
DATA ok_code LIKE sy-ucomm.
DATA: test like mseg-kzear.
BREAK-POINT.
call screen 10.
test = ODGOVOR.
ENDFUNCTION.
*&      Module CLEAR_OK_CODE OUTPUT
      text
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.                 " CLEAR_OK_CODE OUTPUT
*&      Module USER_COMMAND_0010 INPUT
      text
MODULE USER_COMMAND_0010 INPUT.
DATA odgovor LIKE mseg-KZEAR.
CASE ok_code.
    WHEN 'DA'.
    ODGOVOR = 'X'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0010 INPUT

Hi,
You need to declare the ODGOVOR variable in the TOP include, then you will get the value
Regards
Sudheer

Not getting Response from RFC

Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PM

hi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM

How do i get contacts from my address book in entourage to upload to iCloud?

How do I get contacts from my address book in entourage to upload to icloud and so onto my ipad?? can they get to the ipad some other way??

Thanks for the reply Julian, but I tried that and the only cards that show up in that "contacts" folder are the ones that come with the iPod: ipodcreatedsample.vcf and 2 others.
I brought this to the genius bar at my local Apple store, and they couldn't figure out how to do it, so this one is definitely a challenge. The genius bar advice was: "try to find a solution online." Aaack.

Error trying to get project from RoboSource

Help! We have been down from source control for over two weeks since moving to RoboHelp 8 and WIndows 7 and I haven't been successful getting assistance from Adobe support.
Here is the deal. We upgraded to Windows 7 - and no Virginia RoboSource apparently does not work in Windows 7 according to support staff.
So, we installed RoboHelp and the RoboSource client on a virtual machine running Windows Server 2003. We have been unable to perform a get of an entire project since. So, we thought perhaps it was a problem with our RoboSource server so we had our IT department create a new instance of RoboSource server although they were unable to move our data over. I did have the projects locally so I did a check in of the entire project. Hid that project on my machine and attempted to perform a get of the entire project.
I received the following error after some of the files were downloaded onto my machine.
RoboSource Error
A network error has occurred. The full error text was 'An established connection was aborted by the software in your host machine.'
I appreciate any ideas you have. We are starting to look at other options for help since we are holding development up.
NIta

Hi, ndhelp.
I am using RoboSource Control successfully on a desktop and laptop, which are both Windows 7 machines (32-bit) so I don't know why it would not work for you. I wonder if there is some virus checker or firewall blocking port 8039, which is the default port for RSC?
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
http://www.showmethedemo.com

Runtime error encounter when getting instance from ResourceFactory

Hi,
I'm developing a IView report on the documents' status in the repository, but i have encounter the following runtime error when I get an resource instance from the ResourceFactory,
<i>Portal Runtime Error
An Exception occurred while processing a request for:
IView: N/A
Component: N/A
com/sapportals/wcm/repository/IResourceFactory</i>
My codes are as follows:
<i>IResourceFactory factory = Resourcefactory.getInstance()</i>
I try to catch the ResourceException(), but an similar runtime error occured. I'm using PDK EP 6.0_60.2.2
Thanks for any suggestions/solutions provided.

Hi,
did you set the SharingReference attribute in portalapp.xml to "knowledgemanagement, usermanagement" ?
Best regards,
Thilo

Watched folder error - "Exception while getting principal from Directory manager"

Hi! I've been having problems with a LiveCycle ES installation.
I've configured a watched folder that starts a process with an Office
Document, converts it to PDF and applies a Rights Management Policy.
It runs on behalf of an Active Directory user.
Sometimes it works flawlessly, but most of the time it fails, giving a
ridiculously long failure log with the longest trace stacks I've ever
seen in life... resumed:
=======================
ALC-DSC-600-000: com.adobe.idp.dsc.provider.service.scheduler.impl.SchedulerRuntimeException : Failure to invoke the job [watched_folder_endpoint_name]
Caused by: ALC-FEP-011-000: com.adobe.idp.dsc.service.file.impl.FileProviderRuntimeException: Failed to get the context on behalf of user [username], domain [company_domain] for watch folder [watched_folder_endpoint_name]
Caused by: | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16386 errorCodeHEX:0x4002 message:Exception while getting principal from Directory manager| [IDPLoggedException] errorCode:12801 errorCodeHEX:0x3201 message:Exception while getting principal from Directory manager
chainedException:javax.ejb.TransactionRolledbackLocalException: null;
CausedByException is:
nullchainedExceptionMessage:null; CausedByException is:
null chainedException
trace:javax.ejb.TransactionRolledbackLocalException: null;
CausedByException is:
null
=======================
I vaguely suspect is the server's clock going out of sync with the domain controller's clock, but I tried everything I knew of about it with no consistent results.
It's LiveCycle 8.0.1 SP2 installed on a Windows 2003 Server.
Manual install, JBoss Clustered configuration (the second node is actually turned off for the time being)
SQL Server 2005 as backend Database
Users on Active Directory on a Windows 2003 Server -which is a "copy" of the main domain controller.
Watched folder is in a mounted share of another Windows 2003 Server acting as fileserver.
Any clue will be greatly appreciated!!

Hello,
sorry in advance for my english. i am beginning in Adobe LiveCycle and i think that you can help me : i want to configure a watched folder to automatically convert in pdf file and apply a right management policy. Can you tell me how you configure it ? many thanks in advance. regards

Why I cannot get response from my USB device through VISA raw using VISAWrite.vi and VISARead.vi?

I am sure VISA has been assigned as the driver for my USB device (ADC USB FIFO Evaluation Kit). I tried to simply use VISAWrite.vi to send out a word to USB device and want to read the digitalized data from it using VISARead.vi. However, though it seems there are data points flowing, they are all 0-valued coming out from VISARead.vi (I keep reading for N times). Could you comment on my wiring and help me out? I am familiar with LabVIEW but not the real-time and driver things. Many thanks!

Have you been able to confirm that the ADC is connected to a voltage source. What are you expecting to return? I would suggest connecting something like a good 9V battery to the input and reference. Also make sure the reference is either internally connected to ground or you might want to connect a resistor (100kOhm) between the reference and ground.
You might want to try to see what raw data is being returned from the device. Try something like USB Monitor (http://www.hhdsoftware.com/usbmon.html) to see what information is being transmitted between the computer and the instrument.
Did you write the firmware for the device or do you know if the device is suppose to be returning the data from a bulk, interrupt, or control transfer. Also, what is it that
you are trying to create.
-Josh

Time Out Error while waiting for response from DB Procedure

Hi Gurus,
We are encountering a problem in our production environment. The system is implemented using AIA foundation pack 2.5 on SOA suite 10.1.3.4.
We have a BPEL process A which calls an ESB Service which inturn calls BPEL Process B. In process B, we have a DB procedure call which waits for a response from
a DB procedure. The procedure doesn't reply on time and Process B remains in waiting state to get the response from DB Procedure wherein Process A errors out by showing as "Timed Out Error".
This issue is intermittent and we have already increased transaction-time outs in transaction-manager.xml to 7200 and ejb-orion-jar.xml to 3600.
When we encountered this problem, we found out that there are too many connections open and when we bounced the server, everything was restored to nornal but as it is a production env. we can't do it over and over again.
We have 2 nodes each having max connections as 100 and min. as 0.
Is there a limit to max no. of connections or can we do something in DB side to ensure that it doesn't happen again ?
Please suggest.
Thanks,
Vikas Manchanda

Hi Anuj,
I don't think it is a problem with connection reaching to max numbers because this issue is coming on very intermittent basis.we don't have any other processes using
the same connection pool and this issue is coming even when there is no load on the server. This is recent trace from the production environment. Also i don't have any thing called "abandoned-connection-pool" in my data-sources.xml.
<2011-07-07 13:09:16,101> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java:109)
at sun.reflect.GeneratedMethodAccessor113.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DeliveryBean_RemoteProxy_4bin6i8.request(Unknown Source)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processNormalOperation(SOAPRequestProvider.java:451)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processBPELMessage(SOAPRequestProvider.java:274)
at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processMessage(SOAPRequestProvider.java:120)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:194)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:576)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:465)
at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:134)
at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java)
Please suggest.
Thanks,
Vikas Manchanda

Network Devices: id 11009 Error in SNMP GET response from IP Address:, Status: noSuchInstance(129).

Similar Messages

Maybe you are looking for