Network diagnostics - can't connect through Ethernet...ps3 and old iMac work but I can't get this macBook online...help!?!!
Having a problem out of nowhere really getting this MacBook back online through Ethernet.....it's not the modem because my old computer gets online as well as the ps3.....I think it has something to do in network diagnostics but I can't get it.
Thanks!
hi there-
to determine which network port is being used go to the blue apple > system preferences > network and then on the show scroll menu select "network port configurations". then make sure the card is detected there, select it, and then deselect any unused network ports. (the rest of them). [ 8 ) ]
Similar Messages
-
I am having problems connecting to home wifi. It was working, but now all I get is a blank white screen. I re-booted with no success.
Hi, blank white screen where exactly?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
Der Server unter community.stage.corp.adobe.com kann nicht gefunden werden, weil die DNS-Suche fehlgeschlagen ist. DNS ist der Netzwerkdienst, der den Namen einer Website in die zugehörige Internetadresse übersetzt. Der häufigste Grund für diesen Fehler ist eine fehlende Internetverbindung oder ein falsch konfiguriertes Netzwerk. Eine weitere mögliche Ursache ist ein nicht reagierender DNS-Server oder eine Firewall, die den Netzwerkzugriff durch Google Chrome verhindert.
Internetaccess is OK. Firewall is Off.
Thank you,
ManfredThank you very much!!
Best Regards,
Manfred
2015-04-30 9:51 GMT+02:00 99jon <[email protected]>:
Pressing F1: Diese Webseite ist nicht verfügbar
(ERR_NAME_NOT_RESOLVED). How/Where can i get the LR-Online-Help? created
by 99jon <https://forums.adobe.com/people/99jon> in Photoshop Lightroom
- View the full discussion
<https://forums.adobe.com/message/7497497#7497497> -
HT3728 Ethernet cable ran to iMac works, but doesn't when plugged into TimeCapsule
Need help!!! Time Capsule will not work. Continue to get the blinking amber light, even after a soft and hard reset. I tried to reset the modem and that did nothing to help the problem. I then plugged the ethernet cable into computer and it works fine (thus how I am online posting this).
Any help or suggestions please let me know.
ThanksI guess you are using cable modem..??
You cannot change over clients without turning off the modem for a length of time that allows the ISP equipment to reset the MAC address of the device that captures the IP.
It can sometimes take, 15min off or even overnight for the modem to reset.
When it turns back on.. you must have only the TC connected to it.. the first device turned on will capture the IP.
So make sure the TC is plugged into modem.. it must be from WAN port.. (next to USB).
Power up the modem after the off time.. then after 2min power up the TC.
If your modem is not cable tell us.
If this doesn't work tell us precisely the modem make and model, and your ISP. -
Can't get my site online - Help! please?
I initially built my site with Yahoo Sitebuilder but I hate
it so I decided I would finally learn how to use Dreamweaver. I'm
figuring it out as I go and now I'm finally done and ready to go
live...just one big problem...I can't get it online! When I go to
manage my site and test it it says it connect successfully blah
blah blah. Then when I go to 'put' my files it says it was "unable
to complete 5 files or folders" and doesn't tell me which ones they
are. So my issue may be with my folders but I don't know.
Also, I can't preview my pages using F12 in Dreamweaver (it
says "Page Load Error") but if I go to the actual html file in my
folder it opens fine in a browser and my links work also to see
other pages.
Anyone?> would finally learn how to use Dreamweaver
You would be MUCH better off if you put this quest on hold
and spent your
time and effort learning HTML and CSS. If you know the
underlying
technology, the tool that you are using will be a walk in the
park. Besides
DW will require you to have this knowledge or it will beat
you severely
about the head and shoulders with a mop handle.
> and doesn't tell me which ones they are
Yeah - it does. Look in the FTP log.
Or look on the remote site.
> Also, I can't preview my pages using F12 in Dreamweaver
(it says "Page
> Load
> Error") but if I go to the actual html file in my folder
it opens fine in
> a
> browser and my links work also to see other pages.
What have you defined in PREFERENCES for your preview
browsers? Do you have
a TESTING server defined? Do you *NEED* a testing server (it
sounds like
you do not). In this case, just set Server Model to NONE in
the definition
pane for testing server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"emjay1981" <[email protected]> wrote in
message
news:[email protected]...
>
>
> I initially built my site with Yahoo Sitebuilder but I
hate it so I
> decided I
> would finally learn how to use Dreamweaver. I'm figuring
it out as I go
> and now
> I'm finally done and ready to go live...just one big
problem...I can't get
> it
> online! When I go to manage my site and test it it says
it connect
> successfully
> blah blah blah. Then when I go to 'put' my files it says
it was "unable to
> complete 5 files or folders" and doesn't tell me which
ones they are. So
> my
> issue may be with my folders but I don't know.
>
> Also, I can't preview my pages using F12 in Dreamweaver
(it says "Page
> Load
> Error") but if I go to the actual html file in my folder
it opens fine in
> a
> browser and my links work also to see other pages.
>
>
> Anyone?
>
>
> -
Last night Chrome and Google 1+ locked down my pc because I disconnected plus one. I could not even get to Norton. This morning I talked to Norton and they moved my system to FF, I have two accounts Donnie p grant and Donnell Grant. I play Mafia Wars and a browser must be compatible with Client Addon. I am a gamer and had always used FF but was having trouble and switched to Chrome. When Norton moved my files back to FF she downloaded them but I can't get everything back to where it should be and I do not understand so much of it. Please help me set my FF account back up. Thank you
''donngra [[#answer-685379|said]]''
<blockquote>
''FredMcD [[#answer-685331|said]]''
<blockquote>
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 11.5 r502
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
</blockquote>
</blockquote> -
I receive a message prompting me to enter apple ID when using normal phone functions, if I cancel I can still use phone but why does this keep coming up and how do I change that to only prompt if I want to access apple?
Search the forums before posting please. Your question has been asked and answered dozens of times already.
Settings --> Store --> Apple ID -
How can i airplay from my mac connected through ethernet to an aple tv 2 on wifi
Hi everyone..
im having troubles using Airplay on my mac.. i connect my mac to the internet and home network using an ethernet connection to my router (non apple branded router) .. my apple tv 2 is connected to my home wifi network from the same router.. when i first set up my apple tv.. i was able to see the Airplay icon on itunes and it would let me Airplay media from my mac to my apple tv.. however.. it disconnects after a little while.. same thing with viewing my itunes library from apple tv.. i was able to detect my shared library from the apple tv.. i was able to play some media but then it disconnected after some time.. but now.. the Airplay icon doesnt show up in itunes anymore.. and i cant see my shared library from my apple tv neither.. ive looked around for a solution and followed the tip to turn the ipv6 off.. it worked for some time but now the problem is back..
i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet..
Mac OS X Lion 10.7.4
Apple TV 2 software version 4.4.4
Thanks in advancethisguy. wrote:
......i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet.........
I wouldn't say that was the obvious answer at all, my Mac is connected by ethernet and 6 of my 7 Apple TV's are connected by wifi, I haven't had any of your problems. The problem is most likely on your network.
Intermittent problems
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
Consistent Problems
A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
80
TCP
HTTP
AirPlay
443
TCP
HTTPS
AirPlay
554
TCP/UDP
RTSP
AirPlay
3689
TCP
DAAP
iTunes/AirPlay
5297
TCP
Bonjour
5289
TCP/UDP
Bonjour
5353
TCP/UDP
MDNS
Bonjour/AirPlay
49159
UDP
MDNS (Win)
Bonjour/AirPlay
49163
UDP
MDNS (Win)
Bonjour/AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model.
Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them. -
My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...It sounds like there is an issue with the Mac itself.
Use the verify disk A5 in troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere. -
I am trying to hook up a second airport extreme to extend my wireless network. Can I do this without having a second ethernet connection?
Yes. Apple's instructions to do this are here:
http://support.apple.com/kb/HT4259 -
HT204291 airplay icon not showing up on windows laptop when appletv is connected through ethernet
itunes cannot detect apple tv when apple tv is connected through ethernet and the laptop is wireless, although both devices are in the same overall network.
Then I suspect your network or it's settings are your problem.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues. -
Is there way to share Air-Port Wi-Fi connection through ethernet port?
I was wondering if anyone could help me out with this, I have wireless network in the building, and is there way to configure Mac Mini to share Air-Port Wi-Fi connection through ethernet port (feed Vonage adapter)?
Have you actually shared wi-fi to ethernet on a Mac? I ask because it is not usually that simple, it is a more complicated configuration. Most folks who do it the way you described get a self assigned IP and nothing connects.
See my comment here;
http://discussions.apple.com/thread.jspa?messageID=12585788�
I have a Vonage phone adapter and Vonage does not provide the info that you need to hand configure these boxes, I have tried in the past with the one I have with a US phone number from here in Mexico.
Dah•veed -
Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?
This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
Troubleshooting on Windows
If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
Update iTunes to the latest version.
If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
Firewall issues:
Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
The "hosts" file may be blocking the iTunes Store
Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below. -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh
Maybe you are looking for
-
Need help in finding a font for a logo
I was looking for help in finding a font for my logo. I'm not a designer at all, so I'm calling on all the fine designers and folks on the Adobe site to help me out. All replies are, of course, appreciated and any suggestions/comments/ideas will be w
-
I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to se
-
Hi We have a product developed by one of our clients, ITs deployed in Weblogic 7.0. When I was reading the JSP's in the application , I noticed that they are using "Vectors" and Hashtables in the jsp , but the import statement is missing for java.uti
-
Hi, Can anybody explain me in detail how generated requests after customizing are transported from one client to other. And how SE09 and STMS tcodes used.
-
Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen