Network functions missing with AEX

I just got a new (replacement) AEX which I plugged in and it started working straight away with the internet connection. However currently there is no connection to the network - I'm unsure as to whether this was working with THIS airport ever, but I'm sure it used to work with my old one.
Internet connection's still fine, but I can't share iTunes and there are no computers listed in the "Network" in the Finder, however I can connect directly to other computers by giving OS X their IP addresses. But this is obviously cumbersome and doesn't give me iTunes sharing. When I plug my powerbook in with Ethernet, everything's fine, and the settings appear to be identical between the Airport and Ethernet tabs.
I've tried a hard and factory reset of the Airport, multiple resets of this computer and the router... nothing!! Please help...

Thanks for all that help! Eventually an Apple Tech agent helped me and I solved it with a hard reset followed by a running of the setup agent using the most obvious options. Now it's working a treat.

Similar Messages

Replace #Missing with 0...

Hi All,
I have to replace #Missing with 0 in one BSO application.
set cache high;
set clearupdatestatus off;
set notice low;
SET MSG INFO;
SET CALCPARALLEL 4;
FIX(@LEVMBRS("Years",0),@LEVMBRS ("Period",0),@LEVMBRS("Entity",1),@LEVMBRS ("HeadqtrsOrFirm",0),@LEVMBRS ("AgentAccount",2),@LEVMBRS ("AgentAccount",3),@LEVMBRS ("AgentAccount",1),@LEVMBRS ("AgentAccount",0));
"AgntCnt" (
IF ("AgntCnt"==#Missing)
"AgntCnt"==0;
ENDIF
ENDFIX
But nothing happened...
Can you please let me know how to change it.
Thanks,
Prathap

why on earth would you want to do this? This would make the BSO cube huge and long to calc. There are other ways to simulate this without actually loading all the zeros.
1. Add a dimension to the cube (or use an existing dimension) with a member like input. the have a dynamic formula on a second member called reporting with the formula If(Input == #missing) 0; ENDIF
The users would retrieve using the reporting member,
2. In smart View or the Essbase Add-in in the options replace #missing with (0) that will return a numeric zero for #missing. If you are using smart View you could also use #numericzero it does the replacement and has additional functionality if you send data

Does the bluetooth function work with the scanner function on my Photosmart C5550?

I have a new Dell computer and an HP Photosmart C5550. I use bluetooth to connect to the print. The printer function works correctly but the computer does not recognize the scanner function. Does the scanner function work with bluetooth?
This question was solved.
View Solution.

Sorry. I hit post before I could elaborate. Not sure what I was thinking. The Bluetooth connection will only support printing. To use the scan feature you will need to connect the printer using a USB or network connection. Hope that explains it a bit better.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Changeing preferences on network printer queue with Powershell

Hi,
I found a script on this page - http://gallery.technet.microsoft.com/scriptcenter/878e6bac-e2a1-4502-9333-5b1420f8b957 - that I am trying to adapt to work on my users computers and not only on servers. But I can't seem to figure out how to get a reference
to the network attached printers and change their preferences on the computer, the script only get the local ones.
The goal is to use only a portion of the script as a logon script for some users that need onesided printing as default.
param ($ChangeProp)
$host.Runspace.ThreadOptions = "ReuseThread"
Add-Type -AssemblyName System.Printing
$permissions = [System.Printing.PrintSystemDesiredAccess]::AdministrateServer
$queueperms = [System.Printing.PrintSystemDesiredAccess]::AdministratePrinter
$server = new-object System.Printing.PrintServer -argumentList $permissions
$queues = $server.GetPrintQueues()
function SetProp($capability, $property, $enumeration)
if ($PrintCaps.$capability.Contains($property))
$q2.DefaultPrintTicket.$enumeration = $property
$q2.commit()
write-host ($q.Name +" is now configured for " + $property)
write-host (" ")
else
write-host ($q.Name +" does not support " + $property)
write-host (" ")
try {
foreach ($q in $queues)
#Get edit Permissions on the Queue
$q2 = new-object System.Printing.PrintQueue -argumentList $server,$q.Name,1,$queueperms
# Get Capabilities Object for the Print Queue
$PrintCaps = $q2.GetPrintCapabilities()
switch ($ChangeProp)
{$_ -eq "twosided"}
SetProp DuplexingCapability TwoSidedLongEdge Duplexing
break
{$_ -eq "onesided"}
SetProp DuplexingCapability onesided Duplexing
break
{$_ -eq "mono"}
SetProp OutputColorCapability monochrome OutputColor
break
{$_ -eq "color"}
SetProp OutputColorCapability color OutputColor
break
{$_ -eq "staple"}
SetProp StaplingCapability StapleTopLeft Stapling
break
{$_ -eq "show"}
$DefaultTicket = $q2.DefaultPrintTicket
$TicketProps = $DefaultTicket | Get-Member -MemberType Property
write-host (" ")
write-host ($q.name)
foreach ($p in $TicketProps)
$PName = $p.name
$PropValue = $DefaultTicket.$PName
write-host ($p.name + " = " + $PropValue)
default
Write-Host ("$_ is not a valid parameter")
exit
catch [System.Management.Automation.RuntimeException]
write-host ("Exception: " + $_.Exception.GetType().FullName)
write-host $_.Exception.Message

Ok, I want to run this (some...) script on a users computer, not on a server, to be able to change their printer preferences. In this case, a network attached printer with duplex default from the server would get simplex as default.
We don't want to set up different queues on the server for different default settings. That's why we are trying with a script.
Running your script against my computer gets me (trimmed down a bit):
Get-ServerQueues -server it228d
InPartialTrust : False
ClientPrintSchemaVersion : 1
IsXpsDevice :
IsPublished : False
IsRawOnlyEnabled : False
IsBidiEnabled : False
ScheduleCompletedJobsFirst : True
KeepPrintedJobs : False
IsDevQueryEnabled : False
IsHidden : False
IsShared : False
IsDirect : False
IsQueued : False
QueueAttributes : 528
QueueStatus :
FullName : \\it228d\Skicka till OneNote 2010
HostingPrintServer : System.Printing.PrintServer
QueuePrintProcessor : System.Printing.PrintProcessor
QueuePort : System.Printing.PrintPort
QueueDriver : System.Printing.PrintDriver
DefaultPrintTicket :
UserPrintTicket :
SeparatorFile :
Description : \\it228d\Skicka till OneNote 2010,Send To Microsoft OneNote 2010 Driv
er,
Location :
Comment :
ShareName :
NumberOfJobs :
AveragePagesPerMinute :
UntilTimeOfDay : 60
StartTimeOfDay : 60
DefaultPriority :
Name : Skicka till OneNote 2010
Priority : 1
CurrentJobSettings :
PrintingIsCancelled : False
Parent :
PropertiesCollection : {UserPrintTicket, IsXpsEnabled, Description, Name...}
InPartialTrust : False
ClientPrintSchemaVersion : 1
IsXpsDevice : False
IsPublished : False
HasToner : True
IsTonerLow : False
IsWarmingUp : False
IsInitializing : False
IsProcessing : False
IsWaiting : False
IsNotAvailable : False
IsOutputBinFull : False
IsPrinting : False
IsBusy : False
IsIOActive : False
IsOffline : False
HasPaperProblem : False
IsManualFeedRequired : False
IsOutOfPaper : False
IsPaperJammed : False
IsPendingDeletion : False
IsInError : False
IsPaused : False
QueueAttributes : 16
QueueStatus : None
FullName : \\it228d\PDFCreator
HostingPrintServer : System.Printing.PrintServer
QueuePrintProcessor : System.Printing.PrintProcessor
QueuePort : System.Printing.PrintPort
QueueDriver : System.Printing.PrintDriver
DefaultPrintTicket : System.Printing.PrintTicket
UserPrintTicket : System.Printing.PrintTicket
SeparatorFile :
Description : \\it228d\PDFCreator,PDFCreator,
Location :
Comment : eDoc Printer
ShareName : PDFCreator
NumberOfJobs : 0
AveragePagesPerMinute : 0
UntilTimeOfDay : 60
StartTimeOfDay : 60
DefaultPriority : 1
Name : PDFCreator
Priority : 1
CurrentJobSettings : System.Printing.PrintJobSettings
PrintingIsCancelled : False
Parent :
PropertiesCollection : {UserPrintTicket, IsXpsEnabled, Description, Name...}
InPartialTrust : False
ClientPrintSchemaVersion : 1
IsXpsDevice : False
IsPublished : False
IsRawOnlyEnabled : False
IsBidiEnabled : False
ScheduleCompletedJobsFirst : True
KeepPrintedJobs : False
IsDevQueryEnabled : False
IsPendingDeletion : False
IsInError : False
IsPaused : False
QueueAttributes : 528
QueueStatus : None
FullName : \\it228d\Microsoft XPS Document Writer
HostingPrintServer : System.Printing.PrintServer
QueuePrintProcessor : System.Printing.PrintProcessor
QueuePort : System.Printing.PrintPort
QueueDriver : System.Printing.PrintDriver
DefaultPrintTicket : System.Printing.PrintTicket
UserPrintTicket : System.Printing.PrintTicket
SeparatorFile :
Description : \\it228d\Microsoft XPS Document Writer,Microsoft XPS Document Writer,
Location :
Comment :
ShareName :
NumberOfJobs : 0
AveragePagesPerMinute : 0
UntilTimeOfDay : 60
StartTimeOfDay : 60
DefaultPriority : 0
Name : Microsoft XPS Document Writer
Priority : 1
CurrentJobSettings : System.Printing.PrintJobSettings
PrintingIsCancelled : False
Parent :
PropertiesCollection : {UserPrintTicket, IsXpsEnabled, Description, Name...}
But on my computer I have four network printers that is not listed. And those are the ones I want to change the preferences on. Is there a way to do this?

Have functional difference with GPU acceleration and software processing of Mercury Playback Engine?

Used Decklink SDI and Premiere CS6 to testing.
I have a question~Have functional difference with GPU acceleration and software processing of Mercury Playback Engine?
(Can GPU acceleration export same used 59.94i external monitor export?).
IN specification，Is it need“software processing”？ whether other restrictions?
If Anyone know please tell me.
thank you.

Thank you for your help, and sorry about didn't make it clear.
Use Decklink SDI and Premiere CS6 to test.
In GPU mode of Mercury Engine, the signal form SDI is 1080i, but even fields will be missing.
Take a simple test:
Make quick slide for reproduce animationin in quadrangle(1080i 29.97), but it can't paly smooth and same gone to 30P.
If in Software mode, the action can be smooth.
Although use Software mode can be ok,but if GPU does not realize,it will take long time to render.
system info:
macpro 10.8.1
premiere cs6.0.2
blackmagic driver 9.6.4
GTX285
sequence of premiere
Presets/blackmagic/8bit YUV/interlace/59.94i
Have any problems with my System or the GPU mode can no external monitor output in 59.94?
IN specification，Is it need“software processing”？ whether other restrictions?
thank you!

CP3525n no Ethernet function even with new Formatter Board.

Hello. I have an HP CP3525n. There is no LED light or response whatsoever when I connect to the ethernet port of the printer. The original formatter board is CE859-60001.
I ordered a new one from HP, CE859-60002, however I am assuming it should be fully compatible even the chips on it have the same model. Still there are no lights coming on from the Ethernet port, after using different cables that work fine on my PC.
I updated the firmware to latest version (via USB cable). I printed out the entire menu tree for the printer and I don't see any settings that is related to networking (usually have to access to them over the network).
I do not have an EIO card, but I'm assuming it shouldn't be required (?). There is a small panel in the back of the printer that I can open to peak inside the printer to see the internal board, nothing look damaged, but perhaps its something inside there that is damaged that caused the Ethernet to no longer work even with a new formatter board?
This question was solved.
View Solution.

I fixed the issue, it was very easy. Just had to hold the "Check" button while the printer is turning on and wait for three LED to flash, then enabled Embedded LAN.
Now I am having a problem with an HP 4250. It have a board that do not have ethernet. I swapped it with another board that does, on the first boot I can see the Embedded JetDirect menu. But it was on static IP so I switched it to DHCP, then turned it off and on. The next time it turned on, the Embedded JetDirect menu disappeared. Even accessing the secret menu when the printer started, there is no option to turn on LAN. This is even the Ethernet port light is on.
I updated the HP 4250 to the latest firmware from here and it doesn help. I have a feeling this firmware doesn't have network function maybe?

What am I missing with VPN enforcement?

I'm making sense of how to implement the VPN Enforcement feature and would like to hear from others who have set it up.
The way I understand it to work is this...
User connects to the internet (eg with a laptop using a 3G card). Once it detects the internet connection, it switches to the Location specified in the "Switch To" setting on the VPN Enforcement page.
And I have it prompting to connect to the VPN client at this point.
What is puzzling me is... what's the point?
It doesn't seem to make a difference whether the user connects to the VPN or not. The Location in the Switch To setting can have certain restrictions but once connected to the VPN, the Location doesn't change. So, before or after connection to the VPN the same restrictions are in place.
Perhaps I'm missing something in the way this is meant to work.
How has anyone else set this up?
Ideally what I want to happen is....
User connects to the internet - so has enough restrictions (or un-restrictions) to allow this. This would include connecting at an airport or hotel where you connect via a web page. Usually this would be with a 3G modem
then the user is forced to connect to their VPN (in our case we have a dongle and log in. So, I can cause the login screen to appear on VPN switching)
Only allow internet access as long as the VPN is connected. And block access if it is not.
Any thoughts are happily received, thanks
Alison

Here is a brief description of what needs to be done in order for VPN Enforcement to work.
1) The "Unknown" location should have a "stateful" firewall assigned. This allows the endpoint to see all APs and also authenticate to them.
2) The VPN Location should have an "all closed" firewall. This location will be used to switch to once the endpoint gains internet connection (the ZSC checks this automatically). You have to setup a single ACL rule
that points to the IP address of your VPN concentrator (so now the only accessible service/device is the VPN)
3) In the "VPN Enforcement" settings, enter the IP address of the VPN concentrator, the trigger location (at a minimum this is the Unknown), and "Switch to" locations (this is the location you set up in step 2)
5) Again, in "VPN Enforcement" configure the settings needed to make your VPN client to connect "automagically" to the VPN concentrator (client path, and optionally any arguments).
Please note that internet connectivity triggers the enforcement. If someone connects to an AP or wired network that requires authentication (such as you see at a coffee house or hotel), then the Internet connectivity fails.
Hope this clarifies,
Daniel
>>>
From: AWhitwood<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 7/8/2009 10:06 PM
Subject: Re: What am I missing with VPN enforcement?
Excellent - thanks Indy
That is pretty much the same as what I'm setting up. Would you mind
expanding on how you've set this up....I've put your original comments
in blue
1) Users log in and change their location to 'Wired/Wireless/3G'.
I know our users won't manually switch Locations themselves.
I've got this set up to detect the Unknown location which is anything
that is away from the office wired network.
2) Once they have connected to a secure wifi hotspot or their vodafone
3g dongle is connected the location automatically switches to 'Secure
VPN'.
Once they are on the internet, ourLcoation does switch from
"Unknown" to "Away from the Office" (or "VPN" in your system). Can I
ask you what your Firewall settings are on your VPN location? Are there
any restrictions? eg I had it All Blocked but of course it stopped it
connecting the VPN client so I've now got it set to All Stateful.
3) After a few seconds the Cisco VPN Client automatically loads and the
user has to connect via that to get internet connectivity otherwise they
get nothing.
I have this too - the client VPN launches and the user is prompted
to login. But what if they don't? what stops the internet working for
them if they didn't log in? When you say "otherwise they get nothing" -
what is it that prevents them getting to the internet if they have not
connected to the VPN. This is exactly what I'm trying to set up so I'm
very happy to hear that you've done it. What is puzzling me is how to
have it blocking internet access unless it is through the VPN.
I think its purpose is to make sure all internet traffic goes through
your VPN and firewalls, settings, etc etc...
Exactly what I want ! Thanks - I've just got to figure out how to
do it.
Hope that helps,
That helped a lot.
Alison
AWhitwood
AWhitwood's Profile: http://forums.novell.com/member.php?userid=4390
View this thread: http://forums.novell.com/showthread.php?t=379389

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

Using a network-stored catalog with Mac OSX

Greetings all.
I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
Is this true. or has someone found a workaround to the problem?
Thanks!
--John

Thanks, for that ( I assume we have to carry on in English due to forum policy even though we are both of German tongue I assume)
You mean the access problems are part of the "no network drive" thing? I suspected that. Took me a whole day in front of my computer to realign the mess. So should one better not use the network drives at all? Quite a pity in times where everybody seems to use network storage.
No, I did not use organizer to use the photos. So there is no way to reconnect them? Should I delete the catalogue and start with the photos from scratch?
Regards
Andibuch
Am 02.01.2013 um 23:35 schrieb Barbara B.:
Re: Using a network-stored catalog with Mac OSX
created by Barbara B. in Photoshop Elements - View the full discussion
Well, yes, these are part of the "no network drive" thing.
As for moving the photos, did you use organizer to move them? You will always have trouble if you move photos outside of organizer, even on the same drive--you have to let it manage your photos or it doesn't have a clue as to what happened.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963270#4963270
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963270#4963270
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963270#4963270. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Getting Return values from RFC function call with visual basic

Hi,
I am creating a sample app to connect to a SAP system which call its RFC functions created with ABAP. It was known that the function will return more than 1 return values.
   SAP Function name ==> "ZFMTP_RFC_GET_RESULT"
        Export parameters (to SAP):
                - Student Name [char 10]         ==> "STUNAME"
                - Student ID         [char 20]        ==> "STUID"
       Return values (From SAP):
                - Results [char 10]        ==> "RESULT"
                - Remarks [char 200]        ==> "REMARKS"
i have managed to get sample codes for connecting and call a RFC function with vb but they only get a return value. How do i retrieve multiple return values like the above function "RESULT" and "REMARKS"?
Here's my vb code to accessing the function
        Dim R3 As Object
        Dim FBFunc As Object
        Dim returnFunc As Boolean
        Dim connected As Boolean
        R3 = CreateObject("SAP.Functions")
        R3.Connection.Client = "000"
        R3.Connection.User = "BCUSER"
        R3.Connection.Password = "minisap"
        R3.Connection.Language = "DE"
        R3.Connection.System = "dtsystem"
        R3.Connection.Applicationserver = "xxx.xxx.xxx.xxx"
        connected = R3.Connection.Logon(0, True)
        If connected <> True Then
            MsgBox("Unable to connect to SAP")
        End If
        FBFunc = R3.add("ZFMTP_RFC_GET_RESULT")
        FBFunc.exports("STUNAME") = "Jonny"
        FBFunc.exports("STUID") = "12345"
        returnFunc = FBFunc.Call() <<== How do i get the return value? or RESULT and REMARKS of the RFC Function?
thanks alot.
Edited by: Eugene Tan on Mar 4, 2008 7:17 AM

Hi Gregor,
Thanks for the link....i am having some doubts with the codes, hope you can clarify them for me if you know the codes..
Below is the code snippet.
Set impReturn = CHPASS_FN.Imports("RETURN") <<=== is RETURN the standard keyword to get a                                                                                return object?
expPassword.Value = currpass
expNewPass.Value = newpass
expFillRet.Value = "1"
''' Call change password function
If CHPASS_FN.Call = True Then
    outFile.Write (", Called Function")
    Message = impReturn("MESSAGE") <<==== So if i have 3 return values..i just replace with the return                                                               value variable names?
    outFile.WriteLine " : " & Message
Else
    outFile.Write (", Call to function failed")
End If
thanks alot...all your help is very appreciated.

Networking a PC with my Mac

I want to network a PC with my Mac. I did buy a router but was told be customer service of the router company that they did not support Mac software. I had my network up for about a half hour.
I need to know what router to buy for my network. The PC needs to be wired, but I would like to use my wireless airport. What router should I buy?

"I did buy a router but was told be customer service of the router company that they did not support Mac software"
Routers use platform independent, industry standard network protocols. Therefore while the company says they don't support Macs...they are probalby just talking about their own software for configuring the router.
I've used routers and switches over years from just about every common maker...Linksys, NetGear, Asanté, D-Link and they all work with a Mac, so chances are yours works too.
If you really want one labeled Mac compatbile, buy an Apple Airport Extreme Base Station.

Network functions missing with AEX

Similar Messages

Maybe you are looking for