Network Problems when Ordering Photobook

Every time I try to order a book my macbook transfers no data. After a while there is a error message that tells me that there is a network error. Well, my network ist fully functional, otherwise. Any suggestions?
Claus

I'm having the same issue, yet I have successfully ordered 3 books...please let me know if you find something out...

Similar Messages

I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

Is the Face Time Service avabial in Thailand?

BIG problem when ordering multiples of prints

I shoot a lot of portraits, and when I get an order for prints (I have Apple fulfill print orders for 4x6's and I do the larger sizes), I order through Aperture. I select all of the images I'd like printed, then go to File>Order Prints. This is a all fine if you are just ordering 1-4x6 of each image, but what if the client wants 5 4x6's of a specific file, like DSC5678. Guess what? In the ordering interface, the file names are not listed...you just get thums of the prints to be ordered. That means that when I have an order for 150 4x6's and say, 20 of them need multiples prints, I have NO WAY of knowing which prints get multiple 4x6's...I started just writing down descriptions of each image that needed multiple prints, but that was ridiculously time consuming, so, I UPLOADED TO SHUTTERFLY. Apple gonna lose a ton of my printing business if this issue isn't addressed. I assume others must have this problem, too, unless there's some magical fix I am missing.

This bugs me too.
I've filed multiple feature requests around this UI and its inflexibility as a "sheet" -
Please do the same -
1. The version numbers aren't listed in the order pallette, this becomes a problem when you can't tell which version is 4x6 vs 5x7...
2. The Version names get hashed during the upload, so the name printed on the back of the actual print is not the original version name...

Network problem when update ios 5.1.1

hi,
I am in big problem with my iphone 4, when upgrade in ios 5.1.1 then my operator's network some times showing and sometimes not showing. Also notice that if the network bars is full but it is not working.
Please help me with some advise at [email protected] .

Reset network settings and see if it solves the issue.
SETTINGS - GENERAL - RESET - RESET NETWORK SETTINGS
If it doesn't, try basic troubleshooting steps in order.
1) Turn your phone OFF and ON again.
2) Perform phone reset.
3) Restore from a backup.
4) Restore and setup as new.

Network problem when idle

Hi!
I don´t know if I´m in the right topic.
My english is not that good, but I´ll do my best to explain my problem.
I work with Forms 6. So I have at C:\orant the oci*.dll of this version.
I also use sql tools (http://www.sqltools.net/) to run script in my database.
I like Oracle SQL Developer, but it is too slow and heavy. SQL Tools is light and fast.
Both with Forms Builder, as with SQL Tools, if I let they connected to the database, but idle for a while (lets say half hour).
My network connection goes down.
I´m not talking about database connection. I´m talking about the network connection, as if the network cable was removed.
First, i thought it could be the SQL Tools. So I stoped to use for a week, but the problem did not stop. Then I thought that could be the forms builder. I did the same test (a week), but the problem remains.
I tried to download and use for sql tools the oci version 11. Did not work.
I don´t think it is a server configuration, because if it was, just the database connection should be broken.
I think it´s something with oracle libs (dll).
I made sure that it´s nothing but the Forms Builder or SQL Tools that could cause the problem.
I´m sure that is something that it´s common for both of them, that´s why i tried to use the most recent oci version for sql tools.
When network is down. If i close one of them, the network comes back alive.
Does anyone has any idea about what it could be?

Id definitely troubleshoot to see whats going on with the nic at the point it loses connection, I mean you know its one of the programs right, but narrow it down to the exact call. run windump, output to log, recreate issue, stop log.
Download windump
http://www.winpcap.org/windump/install/default.htm
windump also needs winpcap, download from here
http://www.winpcap.org/default.htm
Create a batch file called dumptest.bat with the following line which captures all network traffic to/from the host
windump -A -a -vv -s 0 host <your client name>
then in dos>
dumptest > mytest.log
and let it run
generate the issue, when network connectivity lost, CTRL + C the command line and edit mytest.log and check whats going on when it kills. might be something there.

Network error when ordering prints

I have been trying to order prints of over 1,000 of my photos and they appear to upload just fine and I am able to put in 1 4x6 on all photos. Then, it goes to a grey connecting line, which eventually turns blue. After awhile I get the network error message. I've tried several times over the last week to order the pictures and the same thing happens each time. Is there a limit to how many you can order at once? Do I need to split my order into two separate orders?

Welcome to the Apple Discussions. You very well may be getting timed out on the upload/order process. I'd try splitting the order in two and see if that will go thru unimpeded.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Connecting problems when ordering ibook

I am trying to order an iphoto album and it is not letting me because it is taking forever to connect. Any ideas?

I'm having the same issue, yet I have successfully ordered 3 books...please let me know if you find something out...

Mac falls asleep while ordering Photobook

I use an iMac G4 with the latest OS and iPhoto.
When ordering photobooks, I experience my mac falling asleep (i.e. 'lighthouse mode'). My internet connection is wireless, and I know the Mac sometimes looses the connection with my airport; but finds it back my itself. iPhoto can handle this; it just stalls sending, and continues automatically.
The mac itself however falls asleep after 1h no activitiy; but iPhoto running and having network activity doesn't mean 'now activity'.
I can overcome the problem by switching of sleeping in energysaving options; but it's anoying.
I also experience it sometimes with programs like Realplayer.
Does anyone know how mac defines 'activity'; and how I can overcome this issue?

Martijn567:
Welcome to the Apple Discussions. I don't know how Apple defines "activity" but I know that you have to turn of the sleep option when you're encoding and/or burning iDVD projects to disk image or directly to disk. So it seems to be a system wide issue for operations that rely primarily only on CPU work. It's just the nature of the beast.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Uploading using Adobe Premiere Elements 12 Network problems

Hi,
Is there a place in Adobe Premiere Elements 12 that we can insert our company proxy details, the reason being. When I go to Publish and Share and click "Social Websites" and want to upload a video to youtube and push next it gives the following error "Online Services encountered an error. The services will be terminated or paused if possible."
If I use a 3G card it allows us to upload. Our network must be blocking this link or programme, yet we have made sure from our side adobe is not blocked on the network and I have access to all websites.
My question is can we insert proxy details somewhere or can I get the link of where that link is taking us to when pushing next trying to upload with youtube via adobe . I know it is going to youtube but I need the exact URL to make sure we allow this link to work.
Anyone have the answer for me?

MaudeSt
This is not Adobe. Rather user to user. For network problems when using the current version which is now Premiere Elements 12, please contact Adobe via its Adobe Chat.
Click on the following link, and then find and click on Chat Panel to discuss
Premiere Elements
Downloading, Installing, Setting Up
Downloading, Installing
Chat Panel
Contact Customer Care
I have set the web page to the Chat Panel level. If it does not hold the setting, then you will need to navigate to Adobe Chat using the topics
above as guidelines. If you end up seeing only Ask the Community instead of Chat Panel, then try again later. Chat has been having in times
when it is unavailable due to updating. It is an on and off situation lately. Chat has the option to do remote control of your computer for
troubleshooting purposes. We do not.
At the moment that I am hitting the "Add Reply" for this post, only Ask the Community option is being displayed at the Adobe Chat contact link.
Please let us know the outcome.
Thank you.
ATR

TMQFORWARD dies when network problems occur

Hi
I have two Tux 6.5 (patchlev 317) domains A, B interconnected through a WAN. The
two domains communicate with a disk-based queue which resides on domain A and
TMQFORWARD server forwards the messages to a service of domain B. These messages
just log a few things in a database of domain B.
Sometimes during the day there are network problems on the WAN which give errors
like the following in the ULOG of domain A:
100350.kat1126!GWTDOMAIN.4428: LIBGWT_CAT:1249: WARN: Connect to Kentriko address
2F-2F-31-30-2E-31-2E-39-2E-32-30-30-3A-33-31-30-30-30 failed, Network error(0x0)
100350.kat1126!GWTDOMAIN.4428: LIBGWT_CAT:1304: WARN: No more remote domain address
for remote domain Kentriko
Everything is fine until this point. However, at certain occassions, if after
these network problems I try to tmshutdown domain A, tmshutdown stucks while trying
to tmshutdown TMQFORWARD server. The following is the relevent point in the ULOG
of domain A (server QUEGRP/10 is TMQFORWARD):
142051.kat1126!BBL.4321: LIBTUX_CAT:541: WARN: Server QUEGRP/10 terminated
142051.kat1126!BBL.4321: LIBTUX_CAT:550: WARN: Cleaning up restartable server
QUEGRP/10
142051.kat1126!TMSYSEVT.4426: LIBTUX_CAT:1477: ERROR: .SysServerDied: TMQFORWARD,
group QUEGRP, id 10 server died
142051.kat1126!TMSYSEVT.4425: LIBTUX_CAT:1475: ERROR: .SysServerCleaning: TMQFORWARD,
group QUEGRP, id 10 server cleaning
142051.kat1126!cleanupsrv.8592: 09202001: TUXEDO Version 6.5 SCO_SV 3.2 2 i386.
142051.kat1126!cleanupsrv.8592: server QUEGRP/10: CMDTUX_CAT:551: INFO: server
removed
142252.kat1126!BBL.4321: LIBTUX_CAT:216: WARN: Process 4433 died; removing from
BB
I then have to kill the tmshutdown process and use ipcclean in order to clear
the system!
This problem does not happen in all cases I have network problems between the
two domains. Sometimes I have seen TMQFORWARD dying and then restarting during
the day possibly because of these network problems. When this was the case, domain
A was shutdown perfectly well.
Can anyone explain all these? Why would TMQFORWARD die when network problems occur?
Has anyone met such strange situations with TMQFORWARD?
Many thanks
Lazaros Mitsis

Hi
I have two Tux 6.5 (patchlev 317) domains A, B interconnected through a WAN. The
two domains communicate with a disk-based queue which resides on domain A and
TMQFORWARD server forwards the messages to a service of domain B. These messages
just log a few things in a database of domain B.
Sometimes during the day there are network problems on the WAN which give errors
like the following in the ULOG of domain A:
100350.kat1126!GWTDOMAIN.4428: LIBGWT_CAT:1249: WARN: Connect to Kentriko address
2F-2F-31-30-2E-31-2E-39-2E-32-30-30-3A-33-31-30-30-30 failed, Network error(0x0)
100350.kat1126!GWTDOMAIN.4428: LIBGWT_CAT:1304: WARN: No more remote domain address
for remote domain Kentriko
Everything is fine until this point. However, at certain occassions, if after
these network problems I try to tmshutdown domain A, tmshutdown stucks while trying
to tmshutdown TMQFORWARD server. The following is the relevent point in the ULOG
of domain A (server QUEGRP/10 is TMQFORWARD):
142051.kat1126!BBL.4321: LIBTUX_CAT:541: WARN: Server QUEGRP/10 terminated
142051.kat1126!BBL.4321: LIBTUX_CAT:550: WARN: Cleaning up restartable server
QUEGRP/10
142051.kat1126!TMSYSEVT.4426: LIBTUX_CAT:1477: ERROR: .SysServerDied: TMQFORWARD,
group QUEGRP, id 10 server died
142051.kat1126!TMSYSEVT.4425: LIBTUX_CAT:1475: ERROR: .SysServerCleaning: TMQFORWARD,
group QUEGRP, id 10 server cleaning
142051.kat1126!cleanupsrv.8592: 09202001: TUXEDO Version 6.5 SCO_SV 3.2 2 i386.
142051.kat1126!cleanupsrv.8592: server QUEGRP/10: CMDTUX_CAT:551: INFO: server
removed
142252.kat1126!BBL.4321: LIBTUX_CAT:216: WARN: Process 4433 died; removing from
BB
I then have to kill the tmshutdown process and use ipcclean in order to clear
the system!
This problem does not happen in all cases I have network problems between the
two domains. Sometimes I have seen TMQFORWARD dying and then restarting during
the day possibly because of these network problems. When this was the case, domain
A was shutdown perfectly well.
Can anyone explain all these? Why would TMQFORWARD die when network problems occur?
Has anyone met such strange situations with TMQFORWARD?
Many thanks
Lazaros Mitsis

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Problem when creating planned order with MRP run

Hello,
I create a material with a fix reorder point, MRP type VB. When I run MRP with MD03 on this material I have several problems :
- planned order is created with an opening date in the past, so I have error 'Opening date in the past' in MD04. How can I generate a planned order with opening date not in the past
- when changing manually opening date, after running again MD03, I have error 'No BOM selected'. Material is configurable, has a text BOM, a routing and a configuration profile. What is the problem? When modifying planned order, I have message :
Material requires configuration
Message no. 61259
Diagnosis
Orders and requirements for a configurable material must have characteristic values.
Usually, you should create a variation for configurable materials managed in inventory management which has the default variant configuration.
System Response
MRP: Requirements without characteristic values for a material cannot be planned in MRP.
Procedure
Check requirements or orders.
Create a configuration evaluation for the material in the material master record if necessary.
Thanks in advance.

Hi
I am facing the problem. Could you please tell me if you have resolved the above problem? If yes, Could you please provide me as how you resolved? Thanks in advance.
Thanks
Nagesh.

When working to convert an open PDF to WORD I am getting a request to sign in and then get a message that I cannot sign in due to a "network problem"?

Can anyone help me with this issue? I try to convert an open PDF to WoRD. When I am asked to sign into my account I get an error message that says I cannot sign in due to a Network Problem.

Sara:
A little more cumbersome but going to the AdobeAcrobat.com works.
Thanks for the help.
Have a great day.
Bob

Network Problems when Ordering Photobook

Similar Messages

Maybe you are looking for