Networked HP Laserjet M2727 out of toner error

I keep getting a printer out of toner error message when I try to print to a networked HP Laserjet m2727.  The printer is connected to a D-Link router.  Other PCs on the network can print just fine to the same printer.

The PCs are running windows.  The printer is connected to the router via ethernet.  I'm connected wirelessly to the router.  The problem started when I updated the firmware on the M2727nf last week.

Similar Messages

  • Hp LaserJet P1102w 'Printer may be out of toner' message

    My printer was working (almost) fine with a regular USB wired setup from my MacBook Pro, when I upgraded my OS to Yosemite it began to claim 'Printer may be out of toner' so I installed a new cartridge (needed one anyway) and the same issue arises. I've tried reinstalling it, reseting to factory defaults etc. but to no avail. I'm now trying to connect it to the Wireless Network in the hope it might print from there but not as yet. Any help much appreciated...

    Hi @bpnwainwright ,
    I understand that you are getting a error that the "Printer may be out of toner", since upgrading to Yosemite. I will certainly do my best to help you.
    Since the printer was working properly before upgrading to Yosemite, most likely it is just a driver issue.
    Try and print a hardware self test on the printer just to rule out a hardware issue.
    Printing a Configuration Page.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side delete the driver,  then click the + sign to add a new driver, you might have to click the drop down to select the printer's name to add it in.
    Try printing by the USB connection.
    Are you using Genuine HP Toner?
    I have also provided the steps for setting up the printer over the wireless network.
    Setting up the printer over the wireless network.
    Restore the printer defaults to setup the printer on a new network. I have provided the steps for 10.9, which will also work for 10.10.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
    Laserjet P1102w.
    You may follow the steps instead of watching the video.
    Restore printer defaults first.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print a configuration page to make sure the old network settings are cleared. Printing a Configuration Page.
    Then go to the Apple, System Preferences, Printers and Scanners.
    Highlight the Laserjet on the left side of the window.
    Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button. If it doesn't open, delete and add the printer back in again. Make sure when your adding the printer it shows the printer name. (Laserjet P1102w)
    The Embedded Web Server for the printer will open.
    Click on the Networking tab, select Wireless on the left side.
    Fill out this information for your network. Status make sure you select Enabled.
    Apply the settings.
    Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
    Delete the USB printer from the list from the Printers and Scanners window.
    Disconnect the USB cable.
    Test the printer.
    Please let me know the outcome.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Brand new hp laserjet p1102 and new toner cartridge out of toner after less than 100 prints ! ! ! !

    Hi ,
    I have just bought a brand new HP laserjet p1102 and a brand new toner cartridge, and within litterally 50 sheets being printed it says I am out of toner.
    Please tell me what I must do to get this working again, because clearly I am not out of toner.
    Thanks
    Stephen

    Hello , Welcome to the HP Community.  I'd like to help you with the installation and printing issues you are having with your HP Laserjet Pro M201dw, on your Windows 8.1 operating system. I can certainly understand your frustration, it seems like you have attempted the install multiple times. First, I'd recommend running the Print and Scan Doctor, to see if it can resolve any errors in the software without having to re-install. If it does prompt you to re-install your software, I would suggest uninstalling all M201dw software from the Programs section of your control panel. Once that's done, do a cleanboot of your computer. You can find instructions to complete the cleanboot here: How to perform a clean boot in Windows Note: This will turn off all non-essential startup items, so if it's another program on your computer that is causing the installation to lag, it should resolve the install issue. Rather than installing from the download or the CD that came with the printer, I'd suggest downloading and running the HP Printer Install Wizard. Please respond and let me know if this helped to resolve the issue!Good luck

  • I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out.  Any ideas how to fix this?

    When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out.  Any ideas how to fix this?

    This is asked and answered many time each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • When downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?

    when downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?

    Temporarily dip ****.
    And excluding the extremely high network traffic due to the many millions of users downloading the update a day or two after is was released, this is a problem with that swiss cheese for security garbage OS that is Windows only, which is the joke. An update that is now running on 1 in 3 compatible iDevices which is in the 10's of milllions is vaporware Einstein?
    If I were your rep, I would tell you to **** off. Go get Windoze mobile devices.

  • I recently upgraded itunes. now i get the error message that itunes can't connect and the network connection has timed out

    i keep getting an error message that states
    itunes could not connect to the store. the network connection has timed out.

    Try temporarily disabling your firewall and see if you are then able to access the iTunes store.

  • 8g touch updated 4.2.1, problems synching apps and music. gives multiple errors; device times out, internal device errors, network times out, duplicate file, too many files open. itunes diagnostics ok. what to do?

    have an 8g ipod touch which has had problems trying to play games and downloading update 4.2.1. went to the apple store who kindly downloaded the software update but now can't synch and generates multiple error messages; device times out, internal device error, network times out, duplicate file and too many files open etc etc. have latest i tunes download and diagnostic test ok. what can i do?

    Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
    -- cj

  • I am getting an error message that my network connection has timed out. while trying to update my iPhone on iTunes. Has anyone found a solution? I was given some advice about turning off my firewall and/or virus protection but am nervous about doing that.

    I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.

    See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues

  • I have an error message stating the network connection has timed out and now my aps are grey! help1, I have an error message stating the network connection has timed out and now my aps are grey! help?

    I am trying to get updates on aps i have but its stating a message saying my network connection has time out? help?

    I'm having the exact same problem. I just updated my apps on the computer for now but I think I might try restoring my iPhone unless someone can help us out.

  • HP LaserJet M2727--- Help me!!!

    I am on my third HP LaserJet M2727 in the last 3 months. My first two said Scanner Error 5. Now this one will turn on and work fine but then just shuts off and won\'t work again till the next morning. I\'ve talked to many techs and they said update your drivers and all that jazz. So someone sent me a link to do this and update my software. When I get to the USB cable thing, where it tells me to connect it, I do but it won\'t let me proceed saying its still not connected. It did work once but then it said try again. What do I do??? Help me!!!

    LydiaWhite88,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • N97 out of memory errors

    The product is N97, you don’t have in you drop down list!!!
    I have had my n97 for about 10 days now and everything was going brilliant. It is a stunning piece of kit.
    However on day 11. I repowered the n97, it kept on hanging the eventually got to boot after 20 attempts, but it was useless could not look up contacts. So I had taskman installed and killed loads of processes and uninstalled all the apps. It became usable as a very basic phone, but sluggish. Could use browser, maps, photos.
    The problem is I keep on experiencing out of memory errors on the phone, when I try to do basic things. I don’t know how to resolve this. I have rebooted, reset the phone to factory settings.
    Deleted data, uninstalled more apps and still no joy!! I cannot connect to ovi/pc suite to up grade the phone or roll it back.
    Symptoms the phone is sluggish it is still virtually unusable. It just barely make phones and is slow to respond to touch-screen presses and key presses.
    The taskman app says the is 47 mb free on C: drive. So I cant see what the problem is!!!
    I have always bought nokia for 10 years, never experience this sort of thing before.  I am really disappointed with this.
    Anybody else experienced this? Any ideas?
    Many thanks
    Gd
    Solved!
    Go to Solution.

    Copyless thanks for the tip.  Kudos added :-)
    I had the same problem a friend was trying to bluetooth some videos to me and I was getting Memory problem, How embarasing after a few min of my mates being impressed with the phone, and me praising it and talking about so much space and blah blah blah.
    I could not receive videos via bluetooth because they were 5MB.  WHY on EARTH can they not default this to the E: drive.
    Whoever made that decision in NOKIA should be fired what an idiot.
    Also  when I finally got to get the pictures on the phone via a computer I could not see them via the "Photos"  I had to go via the File Manager and see one by one.  AARRRRRRRRGHHH  I am getting to the point that I am going to return this phone.
    N97 Black unlocked using the 3 Network (UK). Product Code 0586308. Firmware V20.0.019. Made In Finland.Custom version V20.019.235.10.

  • Out of Memory Error!! in DOMParser

    There must be a limit on the amount of memory the Oracle DOM parser allocate when parsing.
    When using the sample XSLSample program in the XDK, I get out of memory errors when attempting to parse large files (around 24M).
    Does anyone know a work around??? Is this a known bug???

    The DOM Model keeps everything in memory.
    Parsing a 24 Megabyte XML file (will requirement creating tons of objects in memory).
    If your file is 24 Megabytes because it is comprised of tons of repeating subdocuments, you might be able to combine processing the document using SAX and DOM to use your result.
    See O'Reilly's Building Oracle XML Applications for fully worked and explained examples of this combination approach.

  • Ios 5 wont finish download to itunes (Network connection has timed out) PLEASE HELP!

    Okay, so i've tried to download it multiple times with multiple "solutions" but none have worked! I'm starting to get SO mad.. and aggravated. I just want this stupid update to update! Everytime it goes to finish it says error, network connection has timed out please check your connection and try again later. My connection is perfectly fine! I've disabled my anti virus and firewall while trying to update too.. no luck. I even downloaded the ios 5 manually from a site, but i dont know how to use that as my download. SOMEONE PLEASE HELP. I am going to go crazy.

    Morizzles wrote:
    i was ready to bash my ipad in. haha.
    Don't do that ... it's never that bad ... there is always as resolution to a problem - at least that is what I believe!!!

  • Out of Memory Error, Buffer Sizes, and Loop Rates on RT and FPGA

    I'm attempting to use an FPGA to collect data and then transfer that data to a RT system via a FIFO DMA, and then stream it from my RT systeam over to my host PC. I have the basics working, but I'm having two problems...
    The first is more of a nuisance. I keep receiving an Out of Memory error. This is a more recent development, but unfortunately I haven't been able to track down what is causing it and it seems to be independent of my FIFO sizes. While not my main concern, if someone was able to figure out why I would really appreciate it.
    Second, I'm struggling with overflows. My FPGA is running on a 100 MHz clock and my RT system simply cannot seem to keep up. I'm really only looking at recording 4 seconds of data, but it seems that no matter what I do I can't escape the problem without making my FIFO size huge and running out of memory (this was before I always got the Out of Memory error). Is there some kind of tip or trick I'm missing? I know I can set my FPGA to a slower clock but the clock speed is an important aspect of my application.
    I've attached a simplified version of my code that contains both problems. Thanks in advance for taking a look and helping me out, I appreciate any feedback!

    David-A wrote:
    The 7965 can't stream to a host controller faster than 800MB/s. If you need 1.6GB/s of streaming you'll need to get a 797x FPGA module.  
    I believe the application calls for 1.6 GB over 4s, so 400 MB/s, which should be within the capabilities of the 7965.
    I was going to say something similar about streaming over ethernet. I agree that it's going to be necessary to find a way to buffer most if not all of the data between the RT Target and the FPGA Target. There may be some benefit to starting to send data over the network, but the buffer on the host is still going to need to be quite large. Making use of the BRAMS and RAM on the 7965 is an interesting possibility.
    As a more out there idea, what about replacing the disk in your 8133 with an SSD? I'm not entirely sure what kind of SATA connection is in the 8133, and you'd have to experiment to be sure, but I think 400 MB/s or close to that should be quite possible. You could write all the data to disk and then send it over the network from disk once the aquisiton is complete. http://digital.ni.com/public.nsf/allkb/F3090563C2FC9DC686256CCD007451A8 has some information on using SSDs with PXI Controllers.
    Sebastian

Maybe you are looking for