New barcode
I want to print Barcode type Code 128 Width 4cm and Height 1cm. I checked SE73. I don't find there. I tried to create one on my own and it is not workin
Any suggestions to make it work.
Thank you,
AP
Hi AP,
Please check this info from other thread perhaps they may help.
You want to define a bar code in SAPscript for which there is not yet a definition.
Procedure:
1. Choose Tools -> Administration -> CCMS -> Administration -> Font Maintenance (transaction SE73).
2. Select System Bar Codes and choose Change.
3. Choose System Bar Code -> Create to define a new bar code. Note the following information:
· Bar code: Enter the name of your new bar code here. The name must begin with a Z to avoid conflict between your bar codes and the SAP bar codes.
· Bar Code Type: Choose one of the bar code types listed. This is currently for information purposes only.
· Rotation at Output: Enter how many degrees your bar code should be rotated at output.
Please check this link for more informatino on new barcodes:
http://help.sap.com/saphelp_nw04s/helpdata/en/d9/4a94fc51ea11d189570000e829fbbd/content.htm
Hope this will help.
Regards,
Ferry Lianto
Similar Messages
-
Is there a way to create new Barcodes for Adobe Printforms
Hi All,
As far I know there is currently no way to add new barcodes to the Adobe designer..SAP Note #430887 says the same..
Can I get any exact SAP note which states that adding new barcodes is not currently possible..
If there is any way we can do this please let me know..
Appreciate your time..
Thanks,
SethuHi,
I hope this will help you.
MW6 Barcode DLL for SAP R/3 is compatible with SAPsprint and SAPlpd, it allows you to print 1D barcodes.
Example:
Code39, Code128, EAN13, EAN8, UPCA and UPCE,
PDF417, DataMatrix, Aztec and QRCode virtually on any windows printer from SAP R/3 system.
TBarCode/SAPwin is a Barcode DLL for SAP R/3, SAP ECC and mySAP ERP. This barcode DLL extends SAPsprint, SAPlpd and SAPWIN DLL with barcode printing features.
TBarCode/SAPwin prints ALL common linear and 2D bar codes on all Windows printers.
Costly barcode equipment like barcode cartridges, barcode fonts or barcode printers are avoided! TBarCode/SAPwin works with SAPscript, ABAP and SmartForms. All SAP-forms are supported without modification.
Thanks -
How to create a new BARCODE PREFIX (for SAPScripts)
In SE73 transaction, we can create a NEW printer barcode. For this we require 'barcode prefix' .There are some SAP standard barcode prefixes(for eg.SBP01)...but I want to create a new barcode prefix..
Please let know how to create a new BARCODE PREFIX.
SE73->Printer barcodes (radiobutton)->change->select one dev.type (dbl click)->create.
here we get a popup for the creation ..asking for BARCODE PREFIX which should be existing in TFO05 table...Hi ,
Please follow following process
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Hope this helps
Thanks
Amit -
Tape lables for old used tapes with new barcodes
Hi All,
We are having some old used tapes ,
For those tapes I have giving an new bar codes and ran an inventory form library it is fine and detected with new barcode.
But when I am running in legato then it is detecting as old volume name .
So, I have deleted the old volume and tried to labeled it with the new bar code even then also it is asking overwrite the RAW017 Volume . Like this message it is giving.
Kindly help me in this.......
Thanks in Advance..................I think I got a solution For this ---
Just I created a new pool and I tried to label that old tape with replaced bar code into this pool.
Then it has labeled as the bar Code mentioned.
and then I relabeled into the pool in which I require that particular tape to be used .
Now that old tape with required bar code it is working fine in required pool.
Thanks for your valuable suggestions.......... -
Hi All,
I need help/ suggestion to print one new barcode text also vertically. My barcode is printing vertically on a label. But the text are printing horizontally. Can anyone please share their inputs on this issue and help me print the text vertically.
Thanks & reagrds
SAPERLEHi All,
I need help/ suggestion to print one new barcode text also vertically. My barcode is printing vertically on a label. But the text are printing horizontally. Can anyone please share their inputs on this issue and help me print the text vertically.
Thanks & reagrds
SAPERLE -
New BarCode Type to print Brazil Boleto forms
Hi
We have requirement to print BOLETO form with Bar Code for Citi Bank Brazil. As per Citi Bank manual provided, we need to print the Bar Code with bar code type "INTERCALATED type 2 of 5".
But in SAP, when we create new custom bar code(ex. ZBAR2) using SE73, we are not finding the above said bar code type.
The nearest match is 2OF5 ( Bar Code ITERLEAVED 2 OF 5). We used this, but the output of bar code printed is not upto the expectation.
Please can someone help on how to bring/install the new bar code type INTERCALATED in SAP.
Thanks in advance.hi,
as for reference i did the same and it is working fine for me...
pls check that smartstyle character format is activated and u assign this characterformat to the variable to print as barcode.
if it works with standard barcode then try to create one for zbarcode for reference.
se73--> system barcodes --> create..
Regards
CNU -
I want to print Barcode type Code 128 Width 4cm and Height 1cm. I checked SE73. I don't find there. I tried to create one on my own and it is not working.
Any suggestions to make it work.
Thank you,
APhi,
as for reference i did the same and it is working fine for me...
pls check that smartstyle character format is activated and u assign this characterformat to the variable to print as barcode.
if it works with standard barcode then try to create one for zbarcode for reference.
se73--> system barcodes --> create..
Regards
CNU -
Aztec and other new barcodes inside PDF print forms
Hello!
Currently we have a form obligatory in communication with several banks in Russia. This form has Aztec barcode on it. Barcode is added using special virtual printer software (supporting only PCL output and working fine from Windows apps like Notepad, Office, etc.).
Now when trying to create the same form is SAP and print it from there (or from Adobe Reader) there's no barcode generated, cause SAP and Reader are sending data in RAW format.
Is it possible to extend the number of barcodes available in Adobe Designer (and on Adobe server of course) for development of print forms?
Regards,
Petr PerstnevThe answer is currently "No". Cause SAP delivers Adobe LiveCycle Designer ver. 8.0x as part of its solution. When SAP is going to support Adobe LiveCycle Designer ES (8.2 or later) than it will possibly become "Yes", cause ALD ES supports Aztec.
Correction: ALD ES (8.1 and later) supports Aztec only in the form of Hardware rendered barcode,
so special printer (Zebra or smth) is needed to print such bcodes.
Edited by: Petr Perstnev on Apr 9, 2009 4:39 PM -
New smartform barcoding technology not producing barcodes
Hello all,
I am wanting to change an existing Smartform label to print using new barcoding technology instead of barcode dll. Our company wants to get away from using the barcode dll for printing smartforms.
When I print out the label the text shows up where it is needed but where barcodes are needed there is nothing. The spool does generate a problem error in the log. I have this included in bottom of post. Below is the information I believe will be valuable in
troubleshooting. If there is anything else you need feel free to let me know. I have spent quite some time trying to troublshoot this. If any of you can provide any help I would really appreciate it. Thanks in advance.
Printer Model: Zebra 170xi4 (300 dpi)
Smartform Page Format Dina4
Non-continuous labels are used in printer and settings in printer show
that as well
SE73 - Created new system barcode named Z128B_N1 via SE73
SPAD - Made copy of device type LZEB3 and named it ZEB3
SE73 - Linked new system barcode Z128B_N1 to printer barcode ZEB3
SPAD - device type ZEB3
SPAD - host spool access method S
The windows 2008 Server that handles printing is running SAPLPD version 6.12 according to log.
text file generated log of spool generation
start of spool text
SAP spool error log
=====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1162 (synt = 1162)
Errors occurred processing this print request
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
OTF module: Unknown print control should be output
Print output may not be as intended
Most important attributes of spool request
Request number 130532
Request name SMART COR5 PRJOHT0
Client 810
Owner PRJOHT0
Request attributes
Time created 2011042817115900
Remaining life +00003000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete) D
Dispo 3 (Indirect/Direct) D
Default output device COR5
Default no. copies 1
Format DINA4
Main print request characteristics
Spool request number 130532
Print request number 1
Print request attributes
Time created 2011042817115900
Output device COR5
Format DINA4
Character converter active when first problem occurred
No information available
end of spool textHello Aidan,
Thanks for the quick response. I did not create the specific printer barcode in SE73 -> Printer Fonts. I created it via SE73 -> Printer Bar Codes. I did try to only create barcode via SE73 -> System Bar Codes but it did not work in my first attempt and then I added it via SE73 -> Printer Bar Codes in my second attempt. Both attempts same result. Do you still think I need to remove the Printer Bar Code reference via SE73 -> Printer Bar Codes?
I did reference SAP note #645158 as well thinking it would work for all device types specifically Zebra device types found in linked note SAP note #750772. If you have any other suggestions I will gladly try it.
Thanks,
John -
Creating new system barcode font on SE73
Hi all...
I'm trying to create a new barcode font based on BC_C128B...
I created a ZXXXXXX with the same attributes...
In the form i put the ZXXXXXX in the codebar field of my char format.
When I run my program and print, i can see the actual characters instead of codebar.
But when i change the barcode to BC_C128B, it prints the codebar correctly...
What am I missing??
Thanks,
EricHi Eric,
In addition to creating the new system barcode, you need to also create the print controls that contain the actual commands that are sent to the printer in the used device type.
i.e. SE73 -> Printer Bar Code -> <Device type>(e.g. HPLJ4000)
In here you have to add the barocde that you created via the 'Create' icon. You can create the ZBC_C128 barcode within the device type and assign two new print controls. e.g.
Device type HPLJ4000
Bar code ZBC_C128
Bar code prefix SBP99
Bar code suffix SBS99
Then you need to fill the print controls SBP99 and SBS99 with commands similar to SBP21 and SBS21. these commands tell the printer to switch to the barcode font.
Regards,
Aidan -
New Technology Barcode Prints small height (SE73)
Hi,
I created a new barcode in SE73 for barcode font CD39 called ZBC_CD39 using the new barcode technology. I click on the TEST icon and the print preview it looks fine. However, when I do a test print, the barcode is printing very, very small height. Any ideas how to make it print bigger?
Thanks.
Message was edited by:
Kenneth MooreCheck for the printer settings also.
-
PDF: Barcode in pdf file
Hello,
I need to create and send a PO and Kanban card through External Send in me22n to a vendor. It should be sent through email with the PO and Kanban card printouts as pdf attachements.
How can I get a correct barcode that could be scanned instead of the place holder ( vertical lines ) ?
Thanks for any help...Yes, it is possible with new barcode font. When the new barcode font is used, SAP generates the barcode instead of the printer making it device independent.
-
Hi,
I am going develop new barcode report in oracle apps (using standard oracle report not like xml,BI.), As i am new to this i need basic information like what are all the setup need to be done whether is possible or not , Following are the versions i am using
Oracle Report Builder 6i (output is Text)
Oracle Apps 11.5.10.2
Sever Details:
DATABASE Server - 10g RAC enabled (Load balancer)
Application Server - Load balancer
Platform: HP - UNIX 64 bit-(PA RISC),
SAN - HP EVA storage
DR site hosted with etisalat (SCSI)You may want to take a look at this blog created by Tim Dexter regarding barcoding in XML Publisher.
http://blogs.oracle.com/xmlpublisher/2006/06/06/#a43 -
Printing Barcode in Dot Matrix Printer
Dear Experts,
We have developed Smart form to print Barcode and it's printing fine in LaserJet printer & readable by the scanner, We need it on Dot Matrix printer for (multiple copies) and tried the same with Dot Matrix printer it use to print but not readable with scanner.
SAP Transaction - MIGO (GI Posting)
Dot Matrix Printer - Epson DFX9000 & Oki data PACEMARK 4410
Please help me to Print Barcode in Dot Matrix printer through Smart form.There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
Could you also tell us what symbology you use, and do you use smart form new barcode technology? -
Problem with Barcode printing in sapscript
Hello All,
I am currently facing an issue with printing a bar code in my sap script.
Below is the scenario:
I am trying to print a delivery number as a bar code. I am using the system bar code BC_CD39C for the same.
i.e the system bar code is attached to the character format <XX>
<XX>&LIKP-VBELN&</>
The issue is, I am getting the barcode printed correctly but when i read the barcode with the reader
an extra alphabet is appearing
eg: if delivery number is 880001143
When i read the barcode it is appearing as follows 880001143W
Could you please let me know what would be the issue?
Regards,
Krishnakumarhi,
i will suggest u to use new barcode technology.
goto se73.
click on system barcode. -
> change
then click on create----
> it will prompt u for choose barcode technology -
>
select new barcode technology -
> give name and short description
> then create any z barcode using system barcode like code39, code 128 barcode check this n create urs with same functions. then
that add newly created barcode in ur smartstyle and then use it .
plz feel free to ask.
Maybe you are looking for
-
Should Migration Assistant be this slow?
Hey gang- Just got a brand new late-2013 iMac to replace my mid-2007 iMac. Migration Assistant is currently in progress, but I'm amazed at how slow it is going. It started about 30 minutes ago and is showing 36 hours 45 minutes remaining! The sou
-
Hi All, we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed. I've created a GPO with settings 'Restricts the UI languages Windows should use for the sele
-
HT4914 Can MPEG files be used with iTunes Match?
I have a lot of songs on iTunes that are MPEG format, can they be used with Match? Thanks in advance!
-
ITunes won't play songs or videos!
Hi guys, I just installed iTunes 7.0. Before that I had the must up to date version of 6. Somewhere along the line when I still had version 6.X, iTunes stopped properly playing video. I could either see nothing, or see one scene, and the audio sounde
-
Can I copy messages from my Time Machine ~/Library/Mail/V2 to Macbook?
Hi, I wonder if I can copy my old messeges from time machine to my new mailbox via ~/Library/Mail/V2 . Maybe I am doing something wrong but all the messages i have copied are not showing in the mail.app and I do not know how to index them. Thank you.