New (bought last year) Officejet Pro 8600 Plus and I can't get the ADF working.

9 month old Officejet Pro 8600 [CC78E4]
Product Number: CM750A-64001
Serial Number: CN1CD1K1CV
ADF used rarely and on the occasions I have tried it it always gives me this problem - even for a copy as opposed to a scan
ADF not working on 5 page document
Tried using 1 page
always get "Reload original in the automatic document feeder (ADF) and try again@
either from the front panel or from the HP scan utility on my PC.
I have been through the process recommended on your support pages for resetting the printer (remove power cord)
Please HP experts come to the rescue!

Hi - You can find the different UK numbers at this location:
http://www8.hp.com/uk/en/contact-hp/phone-assist.html
The good news, as you mentioned is if it is less than a year old, it will be taken care of under warranty at no charge to you.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca

1. HP Officejet Pro 8600 Plus and HP Pavilion dv7-7073ca
2. Operating System
Windows 7 64-bit
3. Error messsage: Blue Screen and Crash. Can't PRINT Wirelessly or Wired + Blue Screen Of Death when printing a document with Microsoft Office. It then restarted the entire computer.
It might have said something about BIOS
4. Any changes made to your system before the issue occurred
No, all I did was install the software that came on the Officejet disc
I don't know what to do. I tried to create an adhoc network, and that didn't work. I tried to connect it via usb cable and the whole computer crashed. I tried to set up a router and then it would not connect to the internet.
Why is this design so flawed? Every wireless printer I have had does this and will not work easily or permanently. You should just be able to connect instantly to your computer and voila, you can print. But nothing seems to work. Mind you, the constant variable here is me, and I have little patience for spending days trying to get this to work. But I am a student, and this is holding back valuable study time.
What do I do???
Any advice appreciated...can someone tell me step by step how to do this? I followed the instructions in the books, but ended up well...you know, so that's why I'm here.

I had the same issue, officejet pro 8600 plus causing blue screen of death on my new computer. After several frustrating months trying everything, I fould that my new computer has 3.1 USB ports, this printer doesnt like them, they need a 2.1 USB port.
For whatever reason USB ports are not backwards compatible, so I plugged the USB cable into the 2.1 port and no more crashes.
3.1 ports are blue, 2.1 ports are black ( the plastic inside)
Hope this helps

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

HP OfficeJet Pro 8600 Plus Firmware version not current on the HP Downloads Page

My HP OfficeJet Pro 8600 Plus came with Firmware version CKP5CN1334ER which the printer update says is up-to-date. The HP downloads page shows CLP1CN1322CR as the current version. Can you tell me what the differences are in version 1334 from the one (1322) on the web page?
It would be nice to have the latest version posted for download to prevent confusion.

Same question here.

Have officejet pro 8600 plus and it prints photos to dark on regular or advanced photo paper?

have a officejet pro 8600 plus printer and whenever i print a photo out , either on regular or advanced photo paper it always comes out darker then the actual photo.

Belive it or not this is acctually normal. Most photos will print a little darker than they appear on screen. This is due to the way the picture is coded and the brightness level on your monitor. You could try following the steps in this document to imporve the quality, but I'm pretty everything is doing what it should. If the colors are completely distorted, let me know and I'll see what I can find.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp officejet pro 8600 plus, document feed tray, I get streaks on copies.

When I copy from the document feed tray, I get streaks down the centr of the paper, I cleaned the printheads, and cleaned the rollers, I don't get the streak down the center anymore, but I still get a line down the right side of the paper. What other steps can I take?

Hi there, Here are the steps for your issues: 1) Close down the scanner lid2) Power down the printer3) With the scanner lid still close, power up your unit4) Feed a paper through the feeder and do a copy job5) Place the printed page on your feeder glass, check on the location of the vertical line with respect to your feeder glass. Check if there is any stain or dust on that area, and use a cloth to wipe it off. Using a torch light would help you in finding the stain/ dust.6) Perform another copy via the feeder. Let me know if this helps

Officejet Pro 8600 Plus copy prints with black streaks

I just bought an HP Officejet Pro 8600 Plus and it seems to work great at printing; however, when I tried to copy something, the copy came out with black streaks that nearly render the print illegible and are the most dark/condensed towards the left hand side of page.
How do I fix this problem?
This question was solved.
View Solution.

Hi,
It could be due to the scan calibration issue during power on.
Power off the Printer, make sure scan lid closed properly. Now power it on, it will do scan calibration.
Now try to do the copy and see the results.
Hope it will help you.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Officejet Pro 8600 Plus

Hello.
I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
I have uninstalled all HP prog's.
Stopped all start up prog's except the Microsoft ones.
Turned off McAfee
Gone to HP and re installed the software and drivers.
These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
Accepted HP licence terms and ran printer installation programme.
Got instalation complete message.
But it is not installing! Where is it downloading the programme and driver to?
Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
I am at whits end with this now. Absolutly hate the McAfee.
Please help. Nick
PS.
I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later. :-(

Hey there @Nick-S!
Thank you for posting on the HP Forums!
I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee. I would be happy to provide some suggestions that may help resolve the issue!
I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network. To restore the network defaults press the Wi-Fi icon on the printer and go into settings. Under settings should be an option to restore the network defaults. Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds. When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
I understand you have re-installed the software but the printer is still not recognised. I recommend uninstalling the HP software one more time. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Officejet 8600 Plus Software and Driver
Please post back and let me know how that goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

HP Officejet Pro 8600 Plus "unspecified printer problem"

I just set up my HP Officejet Pro 8600 Plus e-All-in-One. The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer. When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer." When I check the printer pannel, there are no problems reported. The machine seems to print okay, but I'd like to clear up this error that is shown. Any ideas?
Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting. Thanks.
This question was solved.
View Solution.

HELP!
I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
I'm a step away from taking this back and buying an Epson.
My experience with their support has bee stellar at a commercial printer level.
This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
any help will be appreciated.

Printer won't print - HP Officejet Pro 8600 Plus All in 1

Hi,
Please can anyone help me ?
I have Windows 7, 64 bit HP computer with a HP Officejet Pro 8600 Plus All in 1 Printer.
It printed over the network/wireless yesterday. I then had a problem scanning to the computer so I followed advice on the HP community and uninstalled and re-installed the latest software/driver for the printer.
Today it WON'T PRINT!! The printer has a connection to my router (Plus Net Technicolor N router) and shows the little symbol on the printer screen. I tried printing my work today and it says the printer is offline - it can't be as the printer is ON and has a signal connection.
I have uninstalled, reinstalled, turned it on and off on the printer, I've restarted the computer, I've unplugged and plugged in all of it - the router, computer and printer. The computer has the green tick to say the printer is the default and it is ready. It then says to check the network connection or it maybe to do with the firewall settings, but these I haven't changed for over 1 month and I've printed loads of stuff between then and yesterday.
I desperately need my printer and short of going to have to buy a brand new one - I don't know how to fix it!!!
Please can anyone out there help me??!!!
Help!!!!!!!!!!
Thanks for any helpful advice
Victoria

Just to say as well that on the top of the 'X there is a problem printing' At the top where it says the printer - it has on it 'Fax - HP Officejet Pro 8600'
So it is trying to print from the 'Fax' part of the printer and yet when I change the printer device to the actual 'printer' part to default it always changes back to the 'fax' Officejet Pro 8600 Plus rather than the Officejet Pro 8600 Plus.
I will uninstall all the elements to the printer and then find the latest driver to the printer and start again to see if that helps.
Please help me!!!
Thank you for any helpful advice
Victoria

HP OfficeJet Pro 8600 Plus - Squeals while scanning

My OfficeJet Pro 8600 Plus squeals very loudly while it is automatically feeding paper through to scan the document to a PDF. How do I stop the annoying squeals?? It does NOT squeal while it's printing ... so I'm assuming it has to do with the feeder tray and the rollers associated there ... maybe??

Hey @DEP001,
Welcome to the HP Support Forum! I understand your HP Officejet Pro 8600 Plus e-All-in-One Printer's ADF has become quite noisy. I would like to assist you with this and may have the steps you need to resolve that issue.
The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors, have poor connection, paper feed issues and quality issues.
Secondly, I recommend you try the following:
Clean the ADF
Rollers are used to feed paper into the scanner, while the separator pad prevents multiple pages from feeding at the same time. If the rollers or separator pad are dirty, the ADF might not feed the paper correctly. Follow these steps to clean the ADF mechanism.
Open the ADF cover.
Figure : Open the ADF cover (Officejet Pro 8600)
Figure : Open the ADF cover (Officejet Pro 8600 Plus and Premium)
Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
Use the damp cloth to clean any residue or dust from the pick rollers and the separator pad.
Figure : Clean the ADF (Officejet Pro 8600)
ADF cover
Rollers
Separator pad
Figure : Clean the ADF (Officejet Pro 8600 Plus and Premium)
ADF cover
Rollers
Separator pad
Firmly close the ADF cover.
Try to print from the ADF again.
Source
Lastly, after you've cleaned the ADF, try a 'hard reset':
Let me know if this helps alleviate the squealing sound when using the ADF.
Have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Editing contacts book on HP Officejet Pro 8600 Plus

I am trying to edit and/or delete my contacts book on the HP Officejet Pro 8600 Plus and am wirelessly connected to a network. I get the icon for the contacts book on the printer screen but I see no opportunity to delete or edit a particular contact. Help? Thanks.
lawbar

Ok,
Indeed I referred to the Fax Speed Dial list while you referred to the Scan to Email Contacts List.
That can be chnaged form the printer homepage (EWS) as following:
Open the HP Software by clicking the HP Officejet Pro 8600 icon and thne click on Printer Home Page (EWS)
Click the Scan tab.
Click on Email Address Book and confirm and approve any security alert.
From there you may manage the Address Book.
Note: You may also access it by clicking the network icon on the top of the printer front panel and locating the IP Address.
Browse to this IP from your Web Browser to access the page.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Thin horizontal black line at BOTTOM of page when scan on HP Officejet Pro 8600 Plus

I owned an HP Officejet Pro 8500 and scanning was perfect. I recently purchased an HP Officejet Pro 8600 Plus.
When I scan from the HP 8600 auto document feeder, I get a thin (several pixel wide) black line along the bottom edge of the resulting scan. This line will sometimes be slighly crooked or only appear across half the page, in which case it tends to get thicker toward the edge of the page). I believe this line is an artifact from scanning the very bottom edge of the oroginal document. I think it is showing where the bottom edge of the page was when scanned. If the document is a little skewed, then the black line at the bottom will be a little crooked, probably following the edge of the page. This problem is consistent, and repeatable. It happens in both "Scan To E-mail" mode and "Scan To Network Folder" mode.
When I scan from the flat bed, I get a very narrow black line along the very top edge of the resulting scan, but the bottom appears fine (although I've not tested this extensively).
These thin black lines did not occur when scanning from the HP 8500.
I am wondering if there is a setting to adjust this, or if it is a firmware difference between printers that needs debugging.
This question was solved.
View Solution.

I find it interesting that the issue happens across both printers. This is what leads me to believe this is something with the software/connection with the PC. One thing I will note is that you mentioned above using Adobe Reader 10.1.6. The latest version of Adobe Reader is 11.0.02. I would advise removing your current version of Adobe Reader and install the latest version.
I am not sure if this will fix the issue as you mentioned the line comes across in jpeg and other scanning styles. Do you possibly have another PC you could try setting up a connection with quickly and attempting a scan? This would be another way to ensure if the issue is coming from the printer or a connection/software issue.
I would like to make sure the issue is coming from the scanners on these printers before returning the printers as I would hate for you to get another model printer and the issue remain with this printer as well. However, I will note that the Laserjet Pro 200 is a nice series printer from my experience. I have used the Laserjet Pro 200 black and white only edition, the MFP, and the TopShot edition where I am located.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Replacing ribbon cable cover flap on HP OfficeJet Pro 8600 Plus

On the above printer I was trying to close the lcd flap and somehow knocked off another little flap thing underneath which i didn't even know was there. I'm guessing it's a flap that comes out to protect the ribbon cable underneath, but I cannot figure out how to replace in in such a way that it stays folded out while the screen is lifted up. Thanks for any info.
BH

Hi Bluehorseshoe68,
Welcome to the HP Forums!
I have read your post on a program ribbon on your Officejet Pro 8600 Plus, and I would be happy to assist you!
Because one of the parts on your printer has physically broken off, I would first recommend speaking to our technical support for replacement/ repair options. They can be reached at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
You can also try to reach HP Parts Direct to see if they have the cover you need for your front panel. Their phone number is 1-800-227-8164. I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

New (bought last year) Officejet Pro 8600 Plus and I can't get the ADF working.

Similar Messages

Maybe you are looking for