New DVR and FiOS remote tablet access

I had to get a replacement DVR recently (bad hard drive). All works well except I can't access the DVR details or program the box through the fios remote app on my tablet. It worked fine for the old box. Also, on the app, the old box still shows up.
I can log onto my account at Verizon. Com and I can program, see what's recorded on the new DVR etc.., but again the old box shows up as the default DVR and I need to always choose the new one on a drop down box for things to work. Again, this is on the Verizon. Com website through the DVR manager.
How do I get rid of the old box on the app. I tried uninstalling and reinstalling the app bit to no avail. Again, the problem is the app, which I would like to get to work with the new DVR.

Ok, I found the problem on the FiOS app. There is a button that can switch which box doors the recording. So I now can see what I'd on the new DVR. But still, not sure how to delete the old box from the list

Similar Messages

I have a new computer and I can't access my Itunes account. The message says that I am allowed to have only 5 authorized computers on this account. I do not have 5 authorized computers on my account. What can I do?

I have a new computer and I can't access my Itunes account. The message says I can't have more than 5 computers on this account and I don't. What can I do?

First of all you should really post this in Itunes forums cause you might get more hits on it.. Anyway.. You can only authorize up to 5 comps on one itunes account.. This does not include iOS devices. Those you can have 10.
So to fix this issue, open itunes, hit store on the left side, click log in (or your e-mail address if you are already logged in) in the top right hard corner of the page. One you log into your account you will see a a little area where it says you authorized 5 out of 5 comps. Below it should be a button to clear all those out. Itunes will de-authorize all computers on the account then you need to go back Store tab in the menu bar and select authorize this computer.
Remember it will deauthorize all your computers, so you need to re-authorize any other computers you have.

HT201250 I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

Use Migration Assistant on your new Mac:
Click Continue:
On the next screen, choose your Time Machine backup disk.
Don't bother to migrate Applications unless you know they will work on your new Mac. For example, PowerPC applications won't work. Just migrate your user account which will copy all your photos, music, movies, and other documents.
Note: you will not be able to migrate the information to same account in which you are already logged in. Migration Assistant will tell you that and recommend what to do. It can migrate the information to a new account, but you will have to give it a name you might want to change later. One way around this is to create a temporary account, log in to it, and run Migration Assistant which will replace your normal account. Then, log out of the temporary account, log in to your usual one, verify everyting works as you expect, and delete the temporary one.
All this can be avoided when you set up a brand new Mac by running Setup Assistant which essentially does the same thing to create your new account, but most people are too excited to do that and elect to migrate later.

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...help?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaret

no special characters...
see if this gives you any info...

VIZIO P502ui-B1E and Fios Remote Codes?

I have a VIZIO P502ui-B1E and I''m having trouble getting the Fios remote programmed to work all the functions. I've used all the codes listed in the programming guide, no joy. I finally just used code 922, and cycled through until the TV went off.
The problem is that all of the remote functions don't work. i.e. the "input" button now make the TV mute instead of changing the input. The "mute" button does nothing at all.
Does anyone have the actual code that will enable all functions on the remote for this model TV?
The remote model is the Philips RC 1445301
Thanks!!

Not every TV is going to have a code that makes it fully functional.
Only way to do that is to buy a true universal remote (like the Logitech Harmony) that can be programmed as well as updated.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

TS1398 Purchased new iPad and have no Internet access. I purchased a plan for a hot spot but when I try to do any type of search it says not connected. I have connectivity with my phone with the same carrier. Help

I purchased a new iPad and bought a wireless plan with Verizon but can not get the settings to connect or look for a wifi connection. I can connect to our house wifi but it will not connect on its own. Any help would be appreciated.

Hello there, NapaJohn.
The following Knowledge Base article provides some great steps and information that should prove useful on troubleshooting personal hotspot:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

New computer , and no way to access my old one.

I just got a new computer, and I really want to put my iTunes library on it. I thought you could just plug in your iPhone and it'll automatically sync to the computer, but when I pressed sync, literally nothing happened. I have like 900 songs, and their is no way I can go and make CD's off my old computer to transfer them onto this one. How can I put my songs on my Itunes from my Iphone4? Is it even possible without having to delete anything from my iphone, like without deleting music? (I have windows 7) .

iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
Sync transfer is one way, computer to device, matching the device content to the content on the computer (except purchased content as mentioned above). For transferring other items from an i-device to a computer you have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing):
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141
In general do not regard your i-device as a reliable unique storage for your media. It is not a backup device and everything is structured around you maintaining a backup of your media on a computer backup.

New files and folders missing Group "Access is Denied"

We have recently changed all of our XP machines over to Windows 7 and have now noticed that when a user creates new files or folders on the network it's not adding access for all users. The only way around this is to open the file/folder on the users
machine it was created on and edit the "Group or user name" under the Security tab. Even as an administrator I'm unable to open any of these files/folders.
Our server is SBS 2011.

Hello,
please post the SHARE permissions from the folder that is used also. Therefore open the folder properties, SHARING tab and open the Advanced permissions.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Bought a new iMac and no longer can access my bank account

Why am I unable to access my bank account after I bought a new iMac with Lion?

Did you migrtrate the information from your old computer to the new one? If not, you are probably missing the certificates needed in Keychain Access to connect to the secure server.
If you have the old computer, assuming it is a mac, open the Keychain Access, find a certificate with the name of your bank, copy that to a flash drive, then put that in the Keychain Access of your new machine,

Nokia E7 and RSAP (Remote Sim Access Protocol)

Just spoke to Nokia support in the Netherlands... Guess what?
Nokia does NOT SUPPORT RSAP on the E7-00.
So for all the owners of Volkswagen, Audi owners out there etc.... It does NOT work.
I'm stunned by this reaction of Nokia. Up until now Nokia was a strong supporter of RSAP protocol. But not anymore??
RSAP is Remote Sim Acess protocol and is used as Bluetooth add-on for Volkswagen, Audi, Skoa etc owners.
Solved!
Go to Solution.

Hi, e7-00 works flawlessly with RSAP in my VW with premium bleutooth (it's a separate module while RNS 510 itself doesn't have any bluetooth). It works as good as with my previous N97 and N97 mini. One weird thing though. The simcard is still recognized and named as N97 by the car, the bleutoothconnection itself is connected to E7. Probably because I used the same SIM in my old phone its having that behaviour.
Have you tried to reset all Phone entries from your carset and reconnect the phone again to fix your addresbook issue?
Regards,
Wladimir

Trying to create new user and getting remote procedure call error

I'm trying to create a new user on my windows 8.1 machine but it's not letting me.
If i open control panel and go to user accounts there's not even an option to add a new user. It's like it's missing, there si a blank space where the link should be. I can change my current account type, and manage another account (though that takes me
to the list of accoutns which shows mine and the guest, but no option to add a new one) or change user account control settings.
If i open the run menu and type "users" there is a program that shows up labeled "add, delete and manage other user accoutns" but if I click that a dialog pops up with the following message
I've run sfc /scannow and it says there are corrupt files but that it couldnt repair them and logged them in the CBS.log

OK I tried to run sfc /scannow again, and it said files needed to be fixed on a reboot. I rebooted and I can now create user accounts. So never mind, folks!
Kyle

How can I change my itunes password on my iphone? Someone has hacked my account and is charging my credit card hundreds of dollars. I even cancelled my card and got a new one and they still can access it.

Someone has hacked my itunes account and charged hundreds of dollars to my credit card. I have cancelled my card twice and they can still do it because I enter the new info into my phone. The credit card company said that I need to change my account password. Does anyone know how to change your password on an iphone?

I don't have an iPhone but it may be somewhere along the steps for removing card information
Delete credit card information with iOS - http://bongotbusy.blogspot.com/2011/09/hinthow-to-remove-iphoneipadipad2.html - Settings > Store > Apple ID > View Apple ID > Account > Edit Payment Information > Payment Card > None

Enterprise 220R is down and no remote/local access seems possible...urgent

My ass is grass here if I can't get this fixed shortly...
I had to bring down our Sun Enterprise 220R and now cannot get the thing to boot with services running, can only ping the box.
1. I understand solaris boxes don't boot and instead bring up this Forth OBP menu. Any way to bypass this without having access to the box via telnet/etc.?
2. I have connected a serial cable to both port A (db-25) and port B with no sucess on a Windows laptop running HyperTerminal @ 9600-n-8-1. Doing this same thing to another sun box works fine. On the 220R nothing happens in window. All seems dead.
I am desperate to get this thing booting and will face serious wrath if it isn't done shortly. Naturally we have no video card in box or keyboard for access.
Help is desperately needed...

Does it have an rsc card? If so, the OBP params are changed to redirect I/O to the card. I had this happen on one of my 280Rs. I had to power the machine down, then power it up. While it is powering up watch the amber maintenance light (the small wrench) on the front. When it flashes, press the power buton twice. This boots the machine up in default OBP params allowing serial port access. Be sure to have your hyper/tera term inplace before you do this. Also, sounds like machine is booting in Single User, replying to pings but no telnet nor ftp etc. Could have a nice fsck waiting for you.

What should I do to install iTunes on my new laptop and have access to my music, apps, etc.

I just purchased a new laptop and want to have access to my iTunes, but I am not certain what I should do. For example, do I need to install iTUNES or should I copy and past iTunes via a flash disk?

How to move your music to a new computer.

New DVR, Can't Recognize Existing ESata Drive/Programs

I had a Motorola 7216 DVR box that had an external ESata drive. The box had three issues: froze 2-3 times a day for maybe 30 seconds, sound "clipping" during loud sections of shows/movies, and I could never get the Android app or web app to connect to the DVR. So, I received a new 7232 DVR today. Prior to disconnecting the old, I did the proper method of ejecting of the ESata Drive.
I hooked up the new DVR, and (possibly mistakenly) hooked up the ESata drive as well before booting it up the first time. Did the initialization, all went well. Went through the routine of adding ESata, rebooted, didn't recognize the drive. Realize I maybe shouldn't have plugged it in, so unplugged ESata cord, rebooted, did Set-Top Box Auto Correct, then went through the proper routine to add external storage. However, when rebooting, the box blinks one light for 30 seconds, then the entire display lights up, then it reboots, repeating this routine ad infinitum (nothing ever displays on the TV).
So, thinking I got a bad box, I hook up the old DVR, get it working, and then run the add ESata routine. It now is in the same infinite loop as the old box (for 30 minutes now as I type).
Removing the ESata, and rebooting, back to normal operation, though without ESata and all of the recorded shows.
Any ideas? Do you think my "mistake" in hooking up the ESata drive to the new box right off the bat might have messed up the drive? I'm ordering an ESata to Sata cable so I can hook up the drive to my PC and see if it's accessable. Maybe I can reformat it, knowing we'll lose all our programs (actually, my wife's programs......no big deal to me )
Or does it take a long time to initialize an existing ESata drive with lots of programs on it?
Solved!
Go to Solution.

Greetings, armond_in_nj!
Thanks for your message responding to my plea for help!
OK.... Finally have had time to try everything again AND make notes along the way.
I have a Motorola STB, model HD DVR QIP 7216 P2 500GB.
I have a Western Digital external eSata hard drive, model WDBABT0010HBK-NESN – 1TB (on the "approved" list).
And yes, I have tried everything mentioned in the post by "steveKane" just above my original. See below at the end for what happened when I tried to re-format my WD drive on my desktop PC.
When I first got my WD external HD several months ago, I had to call Verizon support to get the DVR to recognize the Western Digital external HD, but we finally got that fixed and all was fine (i.e., programs recording to external HD, status visible under DVR/Recorder Status using my remote). Then, around mid-november, when I would schedule programs to record, either when I was asleep or at work, when I went to view them later, often times one program was broken into 2 or more segments. Then a little later, sometimes while watching a recorded program, the DVR would just freeze. I would reset the Set Top Box (STB) and could continue watching the program. But this all got worse and worse and, finally, I called tech support. After a frustrating hour with a tech support person, who declared everything was fine with my STB because I could press RECORD and the DVR would record a short segment of programming. During that hour conversation, we had reset the STB more than 10 times. I finally asked to speak with this technician's supervisor, who finally agreed with me that the STB needed replacing. When I received the new STB, it would not function at all. So.... another call to support, more attempts on their end to re-set the STB, and finally they agreed that I needed yet another new STB. When that arrived, I went through all the proper steps to set up the STB first, without the external HD and, only when the new STB was working properly did I try to get it to recognize my external HD.
The Western Digital instructions for connecting their drive to my DVR are as follows:
1. Power off the DVR box by disconnecting the AC power cord. --- Did that
2. Connect one end of the eSATA cable to your My Book AV and the other end to the DVR box (do not use a USB cable to connect to DVR) -- Did that
3. Connect one end of the AC power cord to the My Book AV and the other end to the electrical outlet. The power LED inlluminates. ---- I did, and it did
4. Waii approximately 15 seconds for the hard drive to reach operating speed. -- Did that
5. Power on the DVR box by reattaching the AC power cord. -- Did that
6. Follow the on-screen instructions.
This procedure did not work. There were no on-screen instructions when I powered the STB back on. So, I did the following:
1. I went to "DVR/Enable more storage" and followed the prompts from there, which at one point told me to connect the external HD to the STB, which it already was. I pressed OK to proceed and got the message that "external storage is active for this STB. To detect the external hard, please press OK to reboot the STB".
2. Did that, waited; during reboot, a white band appears briefly across the TV screen with the words "Please wait" in red, then it goes away as the reboot process continues. Eventually, I get a message that says "Press MENU to watch FiOS TV, or turn your TV off". I press MENU, the screen appears (with red background) saying "Verizon FiOS is starting up - one moment pleast. Initial download in progress. It takes about one minute", then after a minute or so, the TV image appears.
3. I go to DVR/Recorder status, and the external HD is not there.
Since the STB prompted me to connect the external HD during step 1 above, I decided to power everything off, disconnect the eSATA cable from the back of the STB, reconnect power to the external HD, then reconnect power to the STB to reboot.
Everything in step 2 above proceeds as outlined there, but still I got no on-screen instructions after FiOS started back up. So, I went to DVR/Enable more storage, followed the prompts until asked to connect the external HD to the STB, at which time, now, I get a pop-up screen that says "The connected external HD has been previously used with another STB with a different DVR. Using the drive on this STB will remove all existing content on the drive. Do you want to use this drive?" Options are "ACCEPT" or "REJECT". I press OK to ACCEPT, then we go through the whole reboot thing again, and still no sign of the external HD under DVR/Recorder status.
I even tried connecting the WD external HD to my desktop computer (running XP Professional) using a USB cable (following "steveKane's" suggestion in his posting of 12-02-12), thinking I could try to reformat the drive on my desktop. After connecting, I go to Window Explorer and the drive is not there. When I open the "Safely Remove Hardware" icon in the Task Bar, the drive is visible there. I tried stopping the device, removing it, then waiting a bit and reconnecting it, but get the same results. Not visible in Explorer so that I can try to re-format.
The posting by "mcorbo" right above "steveKane's" posting says "The only way to reuse the drive is to let the dvr reformat it." So how does one get the DVR to reformat the drive????
I hope I have given you the information needed.
I'm at my wits end. Any suggestions would be greatly appreciated.

New DVR and FiOS remote tablet access

Similar Messages

Maybe you are looking for