New email password reverts to old password after saved
All of a sudden, about a week ago, my push mail stopped working on my AT&T account. I did the usual things, restarted the phone, deleted the email account and added it back, etc. but it still won't push. The strange thing is I went into my AT&T account and changed my password in Outlook. It tested fine and sent the test email. When I go on my iphone and add the AT&T email account back I enter my username and new password and hit "done". It verifies and gives me the check marks and says account added. But when I go back into that account and look at the settings the new password did not stay. It went back to the old password. Why would it do that? How do I get it to save my new password? It verifies it as being correct and I save it but when I go back in the new password is not there. The old one is there again. Does this have anything to do with my email not being pushed to my phone? Please help. Thanks
Bump for help.
Similar Messages
-
I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID. If you can help, please do! Thank you very much!
I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!
-
Updated new email & password in itunes but changes not reflected in iphone
I'm using iPhone4 and have updated my new email address and got a new password in my itunes account but the changes are not reflected in my iPhone so i cannot purchase apps with the iphone, only when connected to the store on my computer. Please tell me how I fix this problem?
And I tried syncing my phone after making the changes and it still isnt working.
-
How do i stop my ipad from asking for a new email password
My work email is on my ipad. I changed my password at work and it is asking for the new password on my ipad. It won't take my new password and it won't let me out of the loop to even use my ipad for anything, including disconnecting my email. How do I by pass the email password question so I can use my ipad?
OK, thanks much. Checked andadjusted setting and now all works like before. And you introduced me to a nice security setting I did not know existed and one I can set up easily if i need to . Thanks again.
-
Email Password after reset, using PLSQL or Java
Hi,
Through user management, users passwords can be reset and sent via email automatically.
Which database procedure behind the scene is used for this? I've created a script to automate user creation and I need a way to email the passwords to users and I think we can re use Oracle solution that emails the password after reset.
Pls let me know if you have any details of PLSQL/Java used to reset and email the password
ThanksPls let me know if any one has any inputs on this.
thanks -
Error when composing new email to send "This message cannot be saved" -?
Just upgraded to Tiger 10.4.6 and finally got my email working except for some reason every time I compose a new email, I get an error pop up stating "this message cannot be saved" -what is it talking about???
Yes, if this is an AOL account, that was the problem.
AOL doesn’t let mail clients create mailboxes at the root level of the account directory on the server. If you have Store draft messages on the server enabled, Mail tries to save the draft on the server, but fails to do so because AOL doesn’t let Mail create the Drafts mailbox there.
Actually, you should turn OFF Store messages on the server for all the mailboxes in Preferences > Accounts > Mailbox Behaviors, so that those mailboxes are stored locally instead. -
I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
Lumina 822 won't remember new wifi password after ...
Phone Information:
Model: NOKIA Lumia 822
Carrier: Verizon Wireless
Software: Windows Phone 8.1 Update
At work, there are wireless access points all over the building. When I arrive in the morning, I am prompted for my enterprise password, and when I move from access point to access point, my phone drops my wireless connection and re-prompts me for my enterprise password even though the SSID is the same. This behavior started happening after I updated my phone from Windows Phone 8.0 to Windows Phone 8.1 AND after I subsquently changed my enterprise password.
It seems to NOT be storing my new password in the wireless connection profile. I have tried deleting the profile and recreating it, but that doesn't seem to fix it.
I do not have this problem at home--and I have multiple routers in my home with the same SSID configured in bridge mode--but then I haven't changed my wireless password at home in years.
I believe there is a bug in this update, but I can't put my finger on it--can someone explain what's going on and when it will be fixed? I'm former Microsoft--I'm wondering if they are experiencing this on campus in Redmond. I'm guessing not. I don't have specifics on what my current employer is running. But my wireless connection is configured for "WPA2 Enterprise EAP Method = PEAP MS-CHAP v2".Hi, rmckenrick. Have you already tried resetting the phone? Note that files will be deleted, so backup is a must. BTW, any difference if you press and hold both the volume down and the power keys for 10-15 seconds? If that doesn't help, you may use the Windows Phone Recovery Tool to reset or recover the phone's software. Link is intended for the UK, but you can still change it to your local support page. Let us know the outcome.
-
Iphone will not accept new email password
I changed my google password in response to Heartbleed. I can log on from laptop BUT I cannot change password on I phone.
I have gone to settings and change
I keep getting message "Password Incorrect" from mailbox. When I type new password in I get the same message....
HELPjgies wrote:
I changed my google password in response to Heartbleed.
I hope you waited until informed by Google that they had fixed the issue. -
Dreamweaver template (.dwt) keeps reverting to old version after reopening CS3
I work locally on all files and upload as needed. After chaging template and applying it, I can upload all associated pages just fine. If I close DW and reopen, the old version of the template is there without any changes -- even though I saved the template.
Also, updating the template will change all other web pages except index.html.
Any ideas?
ThanksSure. No nested templates to my knowledge -- especially since I only have one template. Look like I have some regions in my index.html that don't match the .dwt -- even though the .dwt was created from the .html. When I tried to update the .html, it really screws up the content. Let's kill the 1st bird first -- why my ,dwt file keeps reverting to an old version. Here is the code for the template. Again, thank you!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="keywords" content="annapolis, annapolis cove, annapolis cover neighborhood, bay ridge, marina" />
<meta name="description" content="Annapolis Cove is a scenic waterfront community in Annapolis, Maryland, featuring 208 single-family homes, several of which are waterfront. It has a beautiful private marina on Lake Ogleton that leads into the mouth of the Severn River." />
<title>Annapolis Cove</title>
<style type="text/css" media="all">
<!--
@import url("../CSSSculptor/3ColumnFixedHeaderandFooter_Cove_css/screen.css");
.style1 {color: #FFFFFF}
body {
background-color: #F7F7F7;
-->
</style>
<style type="text/css" media="print">
<!--
@import url("../CSSSculptor/3ColumnFixedHeaderandFooter_Cove_css/print.css");
-->
</style>
<!--[if IE 5]>
<style type="text/css">
/* IE 5 does not use the standard box model, so the column widths are overidden to render the page correctly. */
#outerWrapper #contentWrapper #leftColumn1 {
width: 170px;
#outerWrapper #contentWrapper #rightColumn1 {
width: 170px;
</style>
<![endif]-->
<!--[if IE]>
<style type="text/css">
/* The proprietary zoom property gives IE the hasLayout property which addresses several bugs. */
#outerWrapper #contentWrapper, #outerWrapper #contentWrapper #content {
zoom: 1;
</style>
<![endif]-->
<!--[if lt IE 7]>
<style type="text/css">
img, div {
behavior: url("file:///C|/Documents and Settings/Jim/My Documents/Dreamweaver Projects/Annapolis Cove/CSSSculptor/3ColumnFixedHeaderandFooter_Cove0_images/iepngfix.htc");
</style>
<![endif]-->
<style type="text/css">
<!--
.style2 {font-size: 12px}
.style3 {
color: #003366;
font-weight: bold;
-->
</style>
<link href="../p7vscroller/s5/p7VSC05.css" rel="stylesheet" type="text/css" media="all" />
<script type="text/javascript" src="../p7vscroller/p7vscscripts.js"></script>
<script type="text/javascript" src="../CSSMenuWriter/cssmw/menu.js"></script>
<style type="text/css" media="all">
<!--
@import url("../CSSMenuWriter/cssmw/menu.css");
-->
</style>
<!--[if lte IE 6]>
<style type="text/css" media="all">
@import url("CSSMenuWriter/cssmw/menu_ie.css");
</style>
<style type="text/css" media="all">
img, div, ul, li, span, a {
behavior: url("CSSMenuWriter/cssmw_images/iepngfix.htc");
</style>
<![endif]-->
<script type="text/javascript" src="../p7pmm/p7PMMscripts.js"></script>
<link href="../p7pmm/p7PMMh07.css" rel="stylesheet" type="text/css" media="all" />
</head>
<body>
<div id="outerWrapper">
<div class="style1" id="header">
<div align="center">
<p><!-- TemplateBeginEditable name="Banner" --><img src="../FinalPicnic.png" alt="Picnic area overlooking the marina" width="904" height="199" /><!-- TemplateEndEditable --></p>
</div>
</div>
<div id="contentWrapper">
<div id="leftColumn1">
<h2>Board of Directors </h2>
<p><strong>President</strong> - Norm Idelson, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Vice President</strong> - Judy Appleby, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Secretary</strong> - Carol Small, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Treasurer</strong> - Sylvia Stafford<br />
<a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Members at Large:</strong></p>
<p>Janice Gary, <a href="mailto:[email protected]">[email protected]</a></p>
<p>Gary Lidard, <a href="mailto:[email protected]">[email protected]</a></p>
<p>Ted Rowett, <a href="mailto:[email protected]">[email protected]</a></p>
<hr />
<h2 class="style3">Committee Chairs:</h2>
<p><strong>Accounting Review</strong>: <br />
Al Cipriani and Fred Lounsberry</p>
<p><strong>Architectural Control:</strong><br />
Ann Haller, <a href="mailto:[email protected]" class="style2">[email protected]</a></p>
<p><strong>Common Areas:</strong><br />
George Gonzalez, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Erosion Control:</strong><br />
Vince Ritts, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Hospitality:</strong><br />
Sylvia Stafford, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Marina:</strong> <br />
Bruce Reiter, <a href="mailto:[email protected]">[email protected]</a><a href="mailto:[email protected]"></a></p>
<p><strong>Safety and Security:</strong><br />
Jim Stafford, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Communications</strong>:<br />
Norm Idelson, <a href="mailto:[email protected]">[email protected]</a></p>
</div>
<div id="rightColumn1">
<h2>Board News<br />
<br />
</h2>
<div id="p7VSC_1" class="p7VSC05">
<div class="p7VSC_scrollbox_wrapper">
<div id="p7VSCb_1" class="p7VSC_scrollbox">
<div id="p7VSCd_1_c1" class="p7VSC_scrolling">
<div class="p7VSC_content">
<h4> ACPOA Annual Meeting</h4>
<p>The meeting was held on May 2, 2012. We need15 more votes to reach the quorum. As provided by the bylaws a motion was made and approved to extend the on-line voting in order to try and obtain the required additional votes needed to make the election results official. <strong>If you have not yet voted, please do so ASAP on-line</strong>, using the Votenet system by proceeding to the following <a href="https://vod.votenet.com/ACPOA" target="_blank">link</a> and vote according to the Ballot instructions. Be aware that Fred Lounsberry submitted his name for nomination during tonight’s meeting, and you can vote for him on-line by using the write-in capability should you choose to do so.<br />
</p>
<p>Presentations given at the meeting can be found on the <a href="../covedocuments.html">documents page.</a> <br />
</p>
<h4><strong>Architectural Control Guidelines</strong> </h4>
<p>If you are planning interior remodeling projects, please note that while indoor renovations do NOT require an application to the Architectural Control Committee, an application is required for outdoor construction support such as dumpsters, storage Pods, and Porta-Potties.</p>
<p><strong>Safety Committee Tip of the Month </strong>can be found at <a href="../safetyandsecurity.html">this link.</a></p>
<p><strong>Hospitality Committee</strong></p>
The Hospitality Committee continues to look for volunteers to assist in coordinating community events. Contact Sylvia Stafford if you'd like to join the Committee, 410-268-9618.</div>
</div>
</div>
</div>
<div id="p7VSCtb_1" class="p7VSCtoolbar">
<div class="p7VSCscrollup"><a href="javascript:;" class="p7VSC_up" id="p7VSCbu_1"><em>up</em></a></div>
<div class="p7VSC_pauseplay"><a href="javascript:;" class="play" id="p7VSCbpp_1"><em>Pause or Play</em></a></div>
<div class="p7VSCscrolldown"><a href="javascript:;" class="p7VSC_dn" id="p7VSCbd_1"><em>down</em></a></div>
</div>
<div id="p7VSCcn_1" class="p7VSCdragchannel">
<div id="p7VSCdc_1" class="p7VSCdragbar">
<div id="p7VSCdb_1" class="p7VSCdragCtrl"><a> </a></div>
</div>
</div>
<script type="text/javascript">
<!--
P7_opVSC('p7VSCb_1',1,35,2,2,20,700,1,1,0,1,1200,300,2000,0);
//-->
</script>
</div>
</div>
<div id="content">
<table width="595" border="0" cellspacing="2" cellpadding="2">
<tr>
<td width="592"><div id="p7PMM_2" class="p7PMMh07">
<ul class="p7PMM">
<li><a href="http://annapoliscove.org">Home</a></li>
<li><a href="../leadership.html">Leadership</a></li>
<li><a href="http://annapoliscove.org/coveamenities.html">Cove Amenities</a></li>
<li><a href="http://annapoliscove.org/covedocuments.html">Other</a>
<div>
<ul>
<li><a href="../architecturalcontrol.html">Architectural Control</a></li>
<li><a href="http://annapoliscove.org/bulletinboard.html">Bulletin Board</a></li>
<li><a href="../calendar.html">Community Calendar</a></li>
<li><a href="http://annapoliscove.org/communityresources.html">Community Resources</a></li>
<li><a href="http://annapoliscove.org/covedocuments.html">Cove Documents</a></li>
</ul>
</div>
</li>
<li><a href="http://annapoliscove.org/faqs.html">FAQs</a></li>
</ul>
<div class="p7pmmclearfloat"> </div>
<!--[if lte IE 6]>
<style>.p7PMMh07 .current_mark {font-weight: normal; text-transform: uppercase;} .p7PMMh07 ul ul .current_mark {font-weight: bold;} .p7PMMh07 li {filter: alpha(opacity=80);} .p7PMMh07 ul ul li {float:left; clear: both; width: 100%;}.p7PMMh07 {text-align: left;}.p7PMMh07 ul ul a {zoom: 1;}</style>
<![endif]-->
<!--[if IE 5]>
<style>.p7PMMh07, .p7PMMh07 ul ul a {height: 1%; overflow: visible !important;} .p7PMMh07 {width: 100%;}</style>
<![endif]-->
<!--[if IE 7]>
<style>.p7PMMh07, .p7PMMh07 a{zoom:1;}.p7PMMh07 ul ul li{float:left;clear:both;width:100%;}</style>
<![endif]-->
<script type="text/javascript">
<!--
P7_PMMop('p7PMM_2',1,2,-5,-5,0,1,0,1,0,3,1,1,0,0);
//-->
</script>
</div></td>
</tr>
</table>
<h1> </h1>
<h1><!-- TemplateBeginEditable name="Page Header" -->Annapolis Cove<!-- TemplateEndEditable --></h1>
<p align="center" sb_id="ms__id1076"><img src="../MtgTimeBanner.png" alt="" width="580" height="50" /></p>
<!-- TemplateBeginEditable name="Body" -->
<p sb_id="ms__id1076"><span sb_id="ms__id1077">Annapolis Cove is a scenic waterfront community in Annapolis, Maryland, featuring 208 single-family homes, several of which are waterfront. It has a beautiful private marina on Lake Ogleton that leads into the mouth of the Severn River. On clear days, if you look through the channel, you can see the Chesapeake Bay Bridge approximately five miles north.</span> The Cove has a recreational area with picnic tables and a basket ball court overlooking the marina. It also has a picturesque pond with large snapping turtles that kids love to watch and feed.</p>
<p sb_id="ms__id1076">Annapolis Cove is a 10 minute drive from the Annapolis Historic district and less than five minutes from Quiet Waters Park. Quiet Waters has 340 acres consisting of six miles of paved trails for hiking and biking, visitor center, grandstand for entertainment, ice skating rink, a children's playground, pavillions for picnics, two fenced dog play areas (one for small pups, the other for larger breeds), a dog beach, and kayak and paddle boat rentals.</p>
<p>Annapolis Cove is 35 miles east of D.C., 32 miles south-east of Baltimore, and 122 miles west of Ocean City, MD</p>
<p align="center"><img src="../AnnapolisCoveWeb.jpg" alt="Map of the Annapolis Cove Area" width="550" height="410" /></p>
<p> </p>
<h1>Annapolis</h1>
<hr />
<p>Annapolis has a beautiful downtown historic area with great shops and restaurants. It is also home to the United States Naval Academy and St. John’s College, a liberal arts college with a history going back to 1696. Annapolis is well known as a center of sailing and boating in the Mid-Atlantic. <a href="#"></a></p>
<!-- TemplateEndEditable --></div>
</div>
<div class="style1" id="footer">
<div align="center">Copyright 2012, Annapolis Cove. All rights reserved.</div>
</div>
</div>
</body>
</html> -
IPad2 iOS 6.1 cannot send email - password not saved
I recently upgraded to IOS 6.1 and it must have been around that time that I started receiving errors when trying to send emails. I can recieve fine, but cannot send. The error I get is "A copy has been placed in your Outbox. No password provided. Please go to Mail Account Settings and enter a password."
When I add the password to the outgoing server it verifies. I try to send and get the same message. When I go back to the server settings the password is no longer there. Why won't my password save and how can I fix this? I never used to need a password but for some reason it won't work now without it.
I was able to get it to work once from home with the password but now it won't work anywhere. If i try adding a username as well as the password it just gives me an error that the user name is invalid.
I have checked all my smtp and outgoing server settings, added multiple servers (primary, remote, etc....) and validated ports, changed my webmail password with shaw (to ensure req's for mobile access were met), tried deleting the account and setting it up again, etc... Everything short of actually restoring my ipad, which I don't want to do unless there is no other way.
Also as an FYI - I have 2 mail accounts with Shaw but use one only to send mail (in the process of removing the older one). We also just moved and cannot Shaw service at home so are with Eastlink. The Shaw account is still active and will stay active and I have added both Shaw and Eastlink Server details for outgoing mail. When I'm not home, I rely on my Bell 3G connection for data.
Its very frustrating since I no longer have any other way to email and don't have a cell phone so my main way to contact atm was via email. I am fairly certain that the issue is related to apple software and not my servers, but I'm no expert. I have read that I cannot downgrade my iOS as well.
Any ideas or suggestions are welcome.Ya i tried that (see above). No such luck :(. Thx tho.
-
ITunes reverting to old library after system crash
I just started my itunes after my computer crashed, and it has reverted back to an old library from 2010.
I've tried holding shift and opening itunes to select what library file (.itl) it uses, and even when I select the most recent one, which is dated yesterday, it still only loads the music that I added sometime in 2010.
All of the music and apps I have added since then (which is a lot!) are still in my itunes Media > Music folder, yet they are not showing up when I open itunes. This goes for both music/apps I have purchased from itunes, and music I have added.
Can anyone help me?! I don't want to have go through and add two years of music and apps again!Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Urgent - some emails still going to old mailbox after migration to Office365
Hello, I recently changed all my Email Accounts to Microsoft Exchange Server.
Previously they were pop accounts and I just set them all up as new accounts, importing the .pst file.
90-95% of my emails are all going to my new Exchange Account server, but the odd random email I am not getting and it is going to my old POP account that is still there. The email adress is exactly the same.
Any idea why this is?
Does it take time to fully transfer?
If I shut my Old Pop account, will that fix it? I fear if I do this, those emails might go missing or I would hope that it pushes them towards the new exchange server I have setup.
Please Advise ThanksHi,
In order to troubleshoot the issue more efficiently, I need to clarify one thing.
Did you use the POP3 account and Exchange account for the same profile?
If so, I recommend you use two different profiles to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
New email webpages have same old problem and Customer service doesn't exist
Why is it so tediously hard to find what/where to click to get to my email sub-accounts? You brag that we can have multiple accounts but you overlook making it simple to find their location on your site!!
And your customer service is by far the worst I've experienced between Direct TV, Dish and Verizon Fios. Dish was the best.
Verizon has gotten so huge as to resemble the old AT&T, and some services are being ignored. So the cure is to chop you up.#1 Go to http://www.verizon.net/central/appmanager/portal/vzcentral
#2 Log-in as need be, as the primay account holder.
#3 Go to My Account.
#4 Near the bottom, you can create / delete Or enable/disable certain feature of a sub account.
#5 Log-out, as the primay account ownwer
#6 Go to e-mail. Now you can log-in your sub account, if your sub e-mail account is enabled.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
I've gotten a new iPhone 5 which is replacing my old iPhone 5 and I wanted to restore my settings from my old iPhone to the new one. However during the set up of the new iPhone I lost connection from the internet, therefore I chosed to set up my iPhone as a new iPhone. I have now gone onto iTunes to see if it'll let me restore my old iPhone settings and it was providing me with other devices but my old iPhone. How can I restore my old settings or will I have to start over as a new device?
Hi and Welcome to the Forums!
Since you did a backup, you can perform a restore:
KB23680How to back up and restore BlackBerry smartphone data using BlackBerry Desktop Software 6.0
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Problems while creating a batch input
Hi Experts, I tried to create a batch input program for the transaction CRMD_ORDER for some changes on to the configuration tab to enable the BOM to work. This cannot be done by the BAPIs. I have included the batch input program in a RFC enabled func
-
ZTE Open C doesn't have root access after running unlock tool
I've ordered a ZTE Open C from Ebay from UK, and I wanted to unlock the bootloader. I followed the instructions from here (http://en.comebuy.com/developer-firefox-os-open-c.html), installed the EU version (I've ordered the phone from Hungary), but if
-
How do I get my once to text icon back?
-
How to Remove ZD7000 Antenna Wires from the Hole?
UPDATE: The Maintenance and Service Guide mentions that the antenna wires are attached to a card; that's why I cannot simply pull them out through the hole. There may be enough slack so that, for my purposes, I won't have to disconnect the wires. I'm
-
How do I export a single frame from a QT movie?
WHY in the world does this seem sooooo difficult to do?