New fields added on Bidder data does not appear in Business Partner

Hi,
I have added two new fields in Bidder data tab of Maintain Business Partner screen.
When there are only three tabs viewable i.e Company data , Bidder data , Registration data tabs, the added new fields does not appear.On approved suppliers (vendors) there will be a also tabs for vendor and supplier classification(customised). But for companies that are only approved as bidders, there may be only the 3 tabs showing.
Please help.
Regards,
S. K.

Hi Jay,
Yes i have used EEWB to add new fields. But i have used badi's BBP_BUPA_GET_CUF and BBP_CUF_BADI_2 to display those fields on Bidder data tab.
When business partner is approved bidder that time i am not able to view these new fields, but when business partner is approved vendor that i can view those fields.
We are using SRM 5.5.
Regards,
S K.

Similar Messages

Value of new field in SAP internal table does not appear in HTML

There is already an existing web application. (has both SAP and HTML programs)
I only need to add one field in the SAP internal table and display the value in HTML.
I activated and pushed the publish button in SAP.
Still, it is not read successfully in HTML and therefore not displayed in the GUI.
What step did I miss?

Hi,
To publish completely an internet service, try SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

Newly added Cal.View Measure does not appear in the BEX Designer

Hi,
anybody come about this :
A newly added Cal.View Measure does not appear in the BEX Designer:
I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
and
added a new measure to the Calculation View
and
added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
and
see the newly added filed in the Listccube of the(transient) InfoProvider with a technical generated name
and do not
get the newly added measure in the BEX Designer.
Whats wrong ? What needs to be done ?
Thank You
Martin

Hi Martin,
Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
Rgds,
Murali

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?

Ask in the PS/ LR/ ACR forums
Mylenium

SUS purchaser does not see a business partner in Portal

Hello All,
I set up the process of self-suppliers,
I have already configured the BSP application ros_self_reg,
Now, after filling the page with self-reported, the system provides a business partner in the system SUS with the status "not accept". all business partners are visible in the SUS System (GUI) transaction bp
Question
I assigned the user in the portal as a strategic and operational purchaserrolle, it it still does not see a business partner in Portal on the seite "pre-selection of suppliers."
where there may be a bug? that still need to configure?
whether you need any more settings of transmission business partners of SUS in SRM or of SUS in the portal?
Thank You in advanced

Hallo Nikhil,
Yes, I generated a profile, the role is correct.
perhaps it is necessary to add another user ID and password, which sap the field for that I can use? (Sap-user and password)
please tell me, I understand the process:
1) after the self - registration of suppliers incepted business partners in SUS-System with the status "not released".
2) they will automatically receive the questionnaire, fill out forms and send them to the SUS.
      - Whether they should send the questionnaire to a specific address *@mail.com?
      - And in what system SUS or SRM?
      - that still need to configure in the system for the processing of questionnaires ?)
3) The purchaser enters the portal, open the tab "treatment of potential suppliers", he looks the business (potential suppliers) and rejects or approves of them.
       - Business partners of potential suppliers are in SUS (purchaser simply looks at them through the portal) or they must
         be transferred in SRM?
       - if the business partners of potential suppliers should be moved into SRM, how this happens through that?OPI , PI?)
4) after the approval of the supplier is laid in SRM.
Thank You in advance

Why new Spacer Item cretaed through personalization does not appear in SSHR

SR # 6987444.993
Customer : VIRGIN ATLANTIC LIMITED
RELEASE : 11.5.10 CU 2
Patchset: FP K RUP 2
A Space Item created through Self Service Personalization Does Not Appear in Self Service HRMS Page.
Responsibility : Employee Self-Service
Click on "Personal Information".
Navigate to : Personal Details Region
Click on : "Personalize Basic Details" hyperlink.
In the "Personalize Region : Basic Details" page that opens, in the
Personalize Structure Region : "Complete View" option button is enabled.
In the Style column choose the Value : Default Single Column
Click on "Go" button.
Corresponding to : Default Single Column: Basic Details, Click on "Create Item" icon.
In the "Create Item" page that opens, choose : Level: Function: Personal Information
Item Style : Spacer
ID : Vishu
Admin Personaliation : True
Height : 30
Width : 10
Click on "Apply" button.
Click on "Return to Application".
Simulated in CELALNX10 and crm-au-r12 instance but in both the instances the Spacer items is not appearing.
Does the information specified in Note # 236618.1 - OA Framework Personalization and Extensibility Guide: Version 5.7+
under the Section : Create/Update View Page
is related to this?

Check that you have specified the HEIGHT and WIDTH properties of the spacer!
Also, you have created an item, but make sure that it is RENDERED=TRUE at the personalisation level for your responsibility.
It is good prectice to create an item and render it FALSE. Then go to the specific personalisation level you require and set RENDER=TRUE.
Also, there is a better document than the one you refer to. Try looking at MetaLink document id 268969.1 - Oracle Framework Personalization Guide (OA Framework 11.5.10).
Let me know if that helps.
Regards
Tim

Adding New Fields to a BEx Query does not show up in the CR field explorer

This could be a silly question.
I have a CR report based on a BEx query. I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer.
How do i see this new fields in the CR report?
Help Please
Thanks

Hi,
you can open the report and go to the menu Database > Verify Database.
that should add the new fields to the list of fields in CR
Ingo

Line item data does not appear on all master pages - Adobe forms

Hi Guys,
I have a problem in Adobe forms as explained below-
I have a page in the form which has, you can say, a 2 windows or subforms ( Information window/subfirm on top right corner, main on middle of the page ). The data of the main subform is a line item data of delivery. Some parts of the same data need to be printed on the Information subform also. The main subform can overflow to next pages but the information window will have only very limited data to be printed on one page itself, meaning it does not overflow.
Now the requirement is that each line item should be printed on a new page. For example if there are 2 lines items then first line item should be printed on first page. Then there will be a conditional page break and the next line item will be printed on the next page ( I have achieved this using condition page break). The information window will contain information related to corresponding line items. If the first line item data overflows in main then information window of first line item should be printed on first and 2nd page. The second line item should start printing on 3rd page and information window of 3rd page will contain data of 2nd line item.
I created 1 body page and 1 master page. I created one internal table with data of main window and information window. I put the information window on master page to make it appear on all the pages.
This solution unfortunately does not work. The issue is that in case of overflow, 1st page information window shows first line item. 2nd pages shows 2nd line item and 3rd page is blank whereas ideally 1st and 2nd page information window should show first line item and 3rd page should show 2nd line item. This means that master page and body page are not getting linked. If I create the information window on body page itself, it does not repeat on all the pages. Please provide some inputs to resolve the issue.
Thanks
Abhi

Hi Abhinav,
I am also trying to solve the similar issue. Need to print the internal table data in the Master page.
Have you resolved this issue. Can you Please share your solution .
Thanks
Swarna.

Downloaded new iTunes on windows, now iPod does not appear in iTunes

I down loaded the latest version of iTunes to my PC ( Windows XP). Now my iPod does not show up in devices on iTunes or my computer. I have tried what the help section said - uninstalled and reinstalled iTunes, but still no luck. Any suggestions?

Did you try this Assistant...?
iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/ipodtouch/syncing/

A new contact entered on I pad does not appear on I phone or on Outlook contacts...Microsoft 8.1

A contact entered on the I Pad does not push information to I Phone and Microsoft computer.

On My Mac is a local account, it does not sync to iCloud, use the iCloud account for all contacts/calendars you wish to be available on your devices.
If you are actually using 10.6.7 and not Lion this will not work at all, iCloud services require Lion (10.7.x) or 3rd party software (Soho Organizer) in order to subscribe on Snow Leopard (10.6.x)

Send Date Does Not Appear for Email Notification

Hi All,
Email notifications to user's mailbox do not have a date of send thus user can't sort it by the date. Can anyone tell me how to make the date appear?
Thanks

Similar functionality is available in PO and Req Approval process. Can you take a look at the PO Approval Process workflow? I remember the email notification does show the link, which is a URL link and has parameters in it. This functonality provides where the approvers need to modify the document which is requested to be approved. So they can click on the link, modify and close and approve if necessary.
Are you expecting them to modify the same or you just want to show query only screen?
There is a webpage available to see order information called Order Information (user Order Information User resp). You can send parameters to that webpage and that should show login page opening up a seperate session with all the parameters in the URL. Once logged in that should show order information.
Thanks
Nagamohan

New calendar (iCal) in my Mac does not appears in my iPad

I´ve created a new calendar in my Mac, and I want to sync it with my iPad; It´s very important to me that calendar appears in my iPad but isn´t .
Please, any help?

Create a new empty calendar from the iCal file menu, select which account you want to create it in.
If you have only a few appointments you can move them individually by editing them and changing the calendar in the edit options.
Alternatively you can copy all the appointments in one calendar to another and delete the original.
To copy a calendar ctrl-click on it from the menu that appears when you select the calendar button (top left corner of iCal) and choose export (export it to your desktop for ease)
Double click the exported file and choose the new empty calendar to import them into.
Ctrl-click on the original calendar from the menu that appears when you select the calendar button and choose delete.

Downloaded apple Itunes on our new computer but now the ipod does not appear in the upper left corner and cannot figure how to download songs to my Ipod. Wehave a gatewayunit with windows 8

Cannot figure this out

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.

The data does not encrypt using Wallet!

Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?

Dev. Musbah wrote:
Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?Did you go back and read that what does TDE(transparent data encryption) actually does? It does NOT make your column look encrypted but makes the physically stored data in teh datafile as encrypted which otherwise can be reverse engineered by someone and can be read. In your case, whatever is happening is the right thing.
For your unmentioned version, here is the link for the same,
http://download.oracle.com/docs/cd/E11882_01/network.112/e10746/asotrans.htm#ASOAG10137
HTH
Aman....

Adding Music Does Not Appear In iTunes

Ok found another problem with this new update of iTunes 7.1 on my windows vista.
When I go to ad a new music folder to iTunes it does not appear in my list infact even one song will not appear in my list that I have stored on mt secound hard drive.

I don't seem to be getting a response to this is it just me experincing this issue ???

New fields added on Bidder data does not appear in Business Partner

Similar Messages

Maybe you are looking for