New fields for Attributes Data Tab in Org Model

Hi, Guru's
I want to add/remove a new fields for Org model --->Attributes data tab
Diivision
Currency
region
dist.chnl
like that I want to add another new XXXX and respected values
How it would be done.
Regards
CR Gupta

Thank you.
I didn't get get the final Object
Can any one give solution.
system automatically generating the Table = HRT1222 and Field = LOW,
But
I need to maintain some values and to be select one from that list.
How can I overcome ?
Thank You.
Edited by: CR.Gupta on Oct 1, 2011 7:53 PM

Similar Messages

Add new fields in Additional data tab B in Inquiry,

HI,
I want to add additional new fields in inquiry on the addition tab -B, like
Architect Name
Contractor name
followed By
referenced by like this, and want to capture the report on these fields
plz guide
thanks in advace

Dear Rishi,
Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
Try with these User Exits,
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Add a new field in basic data tab in PPOME for a position

Hello Evryone,
I want to display a Job ID field in Basic Data tab when displaying a position. Is this something to do in config? If yes, could anyone please guide me how to do it? Right now I can see only the Job description, but no ID.
Thank you,
Rush

Hi
Job ID field will not be displayed in Basic Data Tab. That you can see in the top hald of the portion under <-- Mark.
The details you can see are
Task Assignment - Executive
Code-Exe
ID C 50000084
Valid from 30.03.2007
Valid to Unlimited
First select the Job "Executive" and press enter, then you can find the details in the first half of the screen.
Please reward the points without fail.
Regards
Venu

Add new fields to additional data tab in customs declaration

Hello friends,
My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
Thanks a lot in advance. Your help will be highly appreciated.
Regards,
Koustubh

Hi Koustubh,
As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
Can you tell what is the purpose of the extra data / extra tab ?
Best Regards,
Branislav Petricek

Add new fields incu stomer data tab ( transaction BP)

Hello,
I need to add three new fields in the standard transaction BP. I need the three new fields show in the customer data tab when you have introduced a determinated value in control tab before.
Is it possible?
Can you tell me the way?
Thanks

Hello,
I was changing the customer fields of transaction BP with transaction eewb.
I was working in a specific project (ZBUPA) as you can see in the following images. I don´t know what I've changed but now the icon of the enhancement of the project is like a red broken box (Errors occurred if you look for it at the legend), and the task has got a prohibit icon (Processed with Errors). Like this:
[[IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg]http://img329.imageshack.us/my.php?image=errorpp1.jpg][IMG]http://img329.imageshack.us/img329/6627/errorpp1.th.jpg | http://img329.imageshack.us/my.php?image=errorpp1.jpg]
I am very interested in recover the system to the initial state of the screen, like this image shows.
[[IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg]http://img329.imageshack.us/my.php?image=okzv3.jpg][IMG]http://img329.imageshack.us/img329/3763/okzv3.th.jpg | http://img329.imageshack.us/my.php?image=okzv3.jpg]
Thanx!

Long text for a field in Additional Data tab of DMS

i have a field in additional data tab called Name , how can a long text be assigned to that field

Hello Mr. Vijay,
Classification Configuration master data which we need in Additional Data tab. Presently In our SAP system we have limitation for just 30 character for each characteristic if i correct just confirm me please
Regards
Arun kaul

Adding new field to Master Data

Hi All,
I have one master data which is business content.
i need to add one custom field in that with the status information of records. that new field will get data from R/3 status table via extractor from CMOD.
now this Master data is having delta.
my confusion is if i add new field in it how the delta will react ? coz there are different status - eg. when user create the status - it will be "created" that time delta will pick up that record coz it has been changed. Now if user changes status to "closed" or "in transit" how delta will react ?
i meant is it doable to do like that ? any guidance will be appreciated.
Thanks in advance.

Smith,
Your master data extractor will continue to give your existing fields- as for delta - it depends on how the delta is managed - you would have to find that oiut - is it on timestamp / date et etc... ?
CMOD will change only the extract structure and whenever this datasource is called - CMOD fills in the additional field - nothin about delta / init here...
Arun

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

New Fields For Free Goods Determination

Hi everyone. We need to add a new field for FG determination. According to the documentation in SPRO, the new field should be added in SE11 KOMK under include KOMKZ for free goods. However there is no KOMKZ include in KOMK. How is this supposed to work? We have succesfully added fields for pricing, shipment cost, listing and exclusion without any problems.
"New fields for free goods determination are added in the following INCLUDES:
Header data in KOMKZ (INCLUDE in KOMK, KOMG)
Item data in KOMPZ (INCLUDE in KOMP, KOMG)"
Thanks!

Hi Rodrigo..
As mentioned the include is KOMKAZ and not KOMKZ.. Just wanted to check if code has been written in the user exits to populate that fields..
Ex:
FORM USEREXIT_PRICING_PREPARE_TKOMK in include MV45AFZZ .
It worked for me.
Best Regards,
Pradeep.

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

New field Special posting date in GCU1

Hi Friends,
I am having a issue. my client wants to add a new field SPl posting date in GCU1. He wants to transfer some MM originating documents to Spl at this date instead of respective posting dates of those documents.
Kindly advice how this can be done.
Thanks in advance.
Best Regards
Bhairavi

copy the standard program as Z program. add the field in selection-screen and for selection of data include logic for checking the newly added field.
anya

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

How to add new fields to a data extract

The following data extract program generates an output file which is displayed using a publisher template as a check format report.
Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
Thanks

Do anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.

NEW FIELDS FOR PRICE DETERMINATION in MM

Hi all experts,
we have added new field in customizing so that in the purchase order in MM we can use new fields for price determination.
However we do not finde the exit or program were we can set a value for these fields.
for instance, we want to differenciate countries belonging to the EU and not. We create a yes/no field and get its value from table T005 where each country has this info. Everything seems to be ok, but our field is not populated into KOM* tables and therefore we don't go through the condition price...
Any ideas? Thanks.

Hi,
You can try using Info Record.
Thanks,
Venkat

Create new field for service tax no

hello,
my client wants a new field for sevice tax for vendor in cin master maintanance. how can i create.
thanks and regards
bhakta

Hi Jim,
It is sap hierarchy you can't edit it and the thread you are referring to
it is a development they have talked about which i have told you earlier itself but that will create a problem during upgrades and you need to test it everytime after upgrade so you need to check before to go for that development.
Secondly you can go for service desk XT license there is small variation and separate license to be taken and then you can use service desk for NON SAP problem
like printer not working etc
Hope it helps.
Regards
Prakhar

New fields for Attributes Data Tab in Org Model

Similar Messages

Maybe you are looking for