New KURSF in MIR7

Hi,
in MIR7 transaction via badi BADI_FDCB_SUBBAS04 i use an RFC fm to get a value
for field INVFO-KURSF.
When i hold a document (sy-ucomm = STORE) it gets the value received by the RFC fm.
If i simulate (sy-ucomm = PB) the RFC fm is called again and if the value of INVFO-KURSF changes
i get message M8 285 (Balance in currency &, currency type &).
Does someone have an idea why this is happening?
There´s something missing but i do not know what it is.
Best regards.
Edited by: Pablo Casamayor on Sep 2, 2009 8:06 AM

Hi,
if someone has an idea please do let me know.
(i´ve closed this thread and opened a new one in MM forum).
Best regards.

Similar Messages

Add new column at line item level in MIR7 transaction

Hi All,
    I would like to know how to add new column at line item level for GL Account
   tab in MIR7 transaction. could you please let me know how do i add new
   column in MIR7 transaction. Please let me know is there any user exit or any
   other wat to do it.
Thanks,
rao

Hi,
The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
I believe this answer your inquiry.
Best Regards,
Vanessa Barth.

Adding new custom fields in t code - MIR7

Dear Experts ,
I have the following requirement .
In MIR7 t code under the tab - basic data - i have to add new custom fields like
Billing document no and billing doc item along with multiple selection option .
i have found the BADI - BADI_FDCB_SUBBAS04 . i dont know how to get the custom fields in that .
Regards
Prabhu

I have designed a MODAL SCREEN which contains a table control for multiple entries for Billing document nos .
I want to design a PUSHBUTTON on the MIR7 screen and then once i will press the pushbutton the MODAL screen should get called from that .
When the MODAL screen will be called in the back end the MIR7 screen should also be present in the
back end .
If any queries on understanding the requirement then please revert .
If any body has any idea on this then please suggest .
Regards
Prabhu

New field to be displayed in MIR4, MIR7 & MIRO..R3, 4.71,Oracle9i,Solaris

Hi experts,
In MIR4 transaction (Display invoice document) we need to show one
extra field in the subsequent subscreen as mentioned below.
The details of Vendor i.e. bank account number,
Name of the bank, Address, Telephone number, Fax number are available.
Apart from these fields we need to display Bank Control key (LFBK-
BKONT) also on the top of the Vendor bank account number.
This we need to display for MIR4, MIR7 & MIRO transactions.
Please suggest. . .
Regds

Hi Matt Kangas,
So w r to Unix (solaris), replacing the kernel in sapmnt/P47 will do (i mean existing exe rename to like exe_old and new kernel to reanme as exe) or any thing extra i have to do.
Please guide me.

Need to add ASSET field in Gl A/c Tab in MIR7 txn

Hi
Req : Exit or Badi
Transaction MIR7 Invoice parking
Asset field is in PO refernce Tab , my requirement is to add the same ( Asset field ) in G/L Account Tab and write the validation .
Kindly let me know...if any Exit or Badi could be used to enhance the functionality of the standard transaction MIR7
Pols

Hi viswa,
I have a requirement to add 2 new fields to the Standard Transaction (called BP ).
I have gone through various concepts like EEWB and BDT tools. But, still I am not able to get the things well.
So please provide me with the procedure to explore things and work on the requirement.
Thanks in advance.
Regards,
Vishnu.

Issue regarding to change taxcode in tab Gl-account for T.cod MIR7

Hi Expert,
I have issue regarding Tax code in Tab Gl-account for t.cod MIR7 which come by-default , i wan to change that taxcode based on purchase order number which also have tax code with multiple line item in tab PO Refrence,,i want first taxcode of tab PO Refrence to be copied in first line item of tab GL-account based on po number ,can anyone put a light on this issue with priority..
Regard's,
shaikh khalid.

Hi,
You can clear the old items posted in 28000 with the other leg in suspense / clearing GL Account.
Once the above is done, please post once again to Vendor clearing the suspense / clearing account.
Ensure that the suspense / clearing account does not have any open items.
The lines are transfered to new recon account.
Hope this helps, if yes, please assign points.
Regards,
Sankar

MIR7 exchange rate is not modefied with respect to posting date

Hi Experts,
In our SAP system , we use MIR7 to create park invoice at first ,and then use MIR4 to change the parked invoice and post it.
but when creating parked invoice, it's in say June and the exchange rate is 100, and when we create real invoice from parked invoice, it's October and exchange rate turns to 115.
Then I change the posting date in the invoice from June to Ocetober, but the exchange rate is still 100 it is not changing according to the new posting date. How can I solve this problem, please give me a solution a.s.a.p.
Thanks in advance for your help.
Regards
Sunil

Hi Pankaj,
There are so many options e.g you can check in oinm select that particular item sort on docdate and check inqty and compare with your goods issue date if it is same then send same transaction to approval if you want.
Thanks
Sachin

Can i know from MIRO/MIR7 how much is it going to be paid to the vendor?

Hi,
from MIR7,MIRO, before doing any posting, can i know how much is it going to be paid to the vendor?
that is,
with the data of MIR7/MIRO, is it possible to get in advance something similar to the payment proposal of transaction F110?
if so, how?.
Best regards.

Hi Eduardo,
in my customer, previous to invoice verification, it is going to be implemented a new application that will
scan the invoices and create them in the system.
The user wants to know if it is possible to know in advance (even before invoice verification,
even before the document exists in the system) how much a vendor is going to be paid in F110.
I guess i do not have the complete picture of what i´ve been asked.
I´ll ask for more details to the customer.
-> Finally it seems that fm MRM_SRM_INVOICE_SIMULATE was what i was looking for.
Best regards.
Edited by: Pablo Casamayor on Feb 18, 2011 4:58 PM

MIR7 Posting Date

Dear All
Prepared Purchase Order with Docuement Date : 31.03.2010 (Service Purchase Order)
Prepared Service Etry Dt. 03.04.2010
For some reason , deleted Service Entry and also deleted Item (item no. 10) from Purchase Order.
Added New item in Same Purchase Order on 02.04.2010.
Now prepared New Service entry for Item No. 20 of Purchase Order with date 31.03.2010
Now WHile MIR7 entry (By giving new Service Entry Sheet No.) , with Document Date 31.03.2010 & Posting Date 31.03.2010.
After Simulation of Document , Giving error message,
"Posting is not allowed because IR date Prior to GR posting Date of item: 000001,
Message no. SABAPDOCU888"
Now if i give Posting date as 03.04.2010 then it's allow to Save MIR7.
What can be the problem.
Regards
Swati Shah

Hi ,
Looking at the problem you are facing Kindly go through the following points .
1. Is there a GR sheet being created at the time of sevice entry sheet . generally it is a practice where in at the time of creting and releasing a service entry sheet a GR is created in the background with the moment type 101 .
if yes then in that case check the date of posting of the GR. and sconddly check the date of Service entry sheet i.e the date on which the posting is made to accounting .
Hope this would serve the purpose , revert back in case of further queries .
Cheers ,
Dewang

Problem related to MIR7 Display?

Hi All,
I have parked a document through mir7 and now when I am trying to see it through MIR7 again it is giving me the below mentioned message i.e.
Invoice document 5105634725 cannot be processed further
I have checked the PO as there is nothing Blocked in it , if I go through purchase order history in PO and on clicking the same document it gets open but not directly through MIR7.
Please Help

Hi
I tested in my Dev.server and finds OK.
Steps I do
Run MIR7
Choose other Invoice document from menu
Hold after processing the document.
It deletes original parked inovice and creates new invoice document with status posted

User Exit for MIR7 Simulate

Hi all,
        I need to implement a user exit for MIR7 similation . requirment is when user click on button simulate at the time of MIR7 the total amount of all line items should be displayed in popup or any small window. therefore any user is there for do that . and give some tips for inplement that. actualy i am new to user exits.
Thanks in advance
Jitendra

hi,
You can use tcode 'smod' to navigate to one of these enchancement and choose the best EXIT Fm to do the calculation .
Exit Name           Description
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
PS : to create the FM for this user exit , you can use tcode CMODE to create new project with the suitable enhancement and create the code for your calculation.
Thanks

How to choose vendor's second account when MIR7/MIRO ?

Dear All,
Here is my question, one vendor has two account , when MIRO/MIR7, SAP default the first vendor account as IR 's default datas, how to change it to the second account which I have added in the vendor?
In MIRO/MIR7 there only display the vendor bank details, canu2019t choose. thx

step1 : XK02： In the display vendor: payment transactions I add 2 bank key with different bank account,
step2 : MIR7/MIRO： When after entering PO , system default the PO's vendor's first bank account as the new invoice datas, but sometimes I should choose the second bank account for the vendor's invoice .
I have some try about how to choose the very bank account when entering invoice in MIR7/MIRO , but have no idea about this. And now We have to change the vendor's bank account's sequence for this requirement.
As there has a list for vendor's bank accounts in the payment transactions, then I think SAP should let me choose whick bank account when entering invoice in MIR7/MIRO, and how?
thanks a lot

Change standard MIR7 document header screen

Hi there dear ABAP'ers.
Could you please tell me is it possible to modify the standard MIR7 screen in document header section to add there another input field?
User would enter that field a special period number. Then that infrmation would be saved to database when saving/posting a document.
Is it feasible?
I will be thankful for help. Regards. P.

The old [Note 352701 - MIRO: fields in invoice verification|https://service.sap.com/sap/support/notes/352701] and [Note 174413 - Customer-specific fields in new Enjoy transactions|https://service.sap.com/sap/support/notes/174413] do not make me optimistic.
Regards,
Raymond

Add customer column in item MIR4/MIR7

Hi all,
I would like to know, how to add new column at line item in MIR7 or MIR4
transaction. I need to add new a customer field column at itme in MIR7 transaction.
If any one knows the process please reply..
thx
Widad.

Hi,
have a look at badi MRM_ITEM_CUSTFIELDS in se18.
Check too sample implementation WKA_ITEM_CUSTFIELDS in se19.
Best regards.

Documents that are park in FBV0 do not update with the new user name when

Hi,
I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made. Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
Requesting you to please suggest what could be the reason.
Earliest reply will be highly appreciated,
With regards,
Rj

Hi,
I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
Regards,
Rj.

New KURSF in MIR7

Similar Messages

Maybe you are looking for