MIR7 exchange rate is not modefied with respect to posting date

Hi Experts,
In our SAP system , we use MIR7 to create park invoice at first ,and then use MIR4 to change the parked invoice and post it.
but when creating parked invoice, it's in say June and the exchange rate is 100, and when we create real invoice from parked invoice, it's October and exchange rate turns to 115.
Then I change the posting date in the invoice from June to Ocetober, but the exchange rate is still 100 it is not changing according to the new posting date. How can I solve this problem, please give me a solution a.s.a.p.
Thanks in advance for your help.
Regards
Sunil

Hi Pankaj,
There are so many options e.g you can check in oinm select that particular item sort on docdate and check inqty and compare with your goods issue date if it is same then send same transaction to approval if you want.
Thanks
Sachin

Similar Messages

Exchange rate coefficient on the basis of latest posting date in invoice.

Hi,
I have one query on posting date(picking of exchange rate coefficient from TCURR table) in invoice verification. Please help.
Conditions are--
vender and company code are not in same currencies(ex-USD and INR). exchange currencies are maintained perfectly on every month 1st ie co-efficients in TCURR table ie OB08
Query---
1.At the time of parking invoice suppose i enter the date 20th august and i have posted that invoice as parking. It is converting the local currency as per 8th month exchange rate.
2.And at the time of final posting the invoice supose i posted that date as 10th September. Business wanted that converting the local currency as per 9th month exchange rate But now local currency is converting on the basis of initial entry of posting date ie 8th month only.
Please advise and guide what configeration that i have to set for picking the exchange rate coefficient on the basis of latest posting date in invoice verification.
Thanks & Regards,
MadhuBabu.

Hi
I dont think it is possible as once you enter posting date while in parking invoice screen, on that date exchange rate will be calculated and it wil not be different at time of posting invoice. Instead of parking, you have to directly post with current posting period.
Thanks

Blocking of Good Issue with respect to posting date

Hi Expert,
Is there any way out in SAP B1 to block the Good Release with respect to posting date.i.e. If User receipt the Good in stock today then system should not allow the user to issue the same good on the back date.
regards,
PankajK

Hi Pankaj,
There are so many options e.g you can check in oinm select that particular item sort on docdate and check inqty and compare with your goods issue date if it is same then send same transaction to approval if you want.
Thanks
Sachin

Wrong Exchange rate for Import PO with past Condition Price date

Hi
We do update Exchange rate type "M" on daily basis, but exchange rate in Import PO is wrong. While creating import PO, the PBXX condition automatically obtain the "exchange rate" with Old "condition price date" despite the Table "TCURR" has maintained updated data. Why system behavior is like this?
As per our requirement, system should obtain the data based on PO date. Kindly help with your experiences.
Prashant

Hi Biswajit,
Use the user parameter EVO to indicate that no price adoption from last Purchase Order must take place:
IMG: MM -> Purchasing -> Environment data -> Default values for Buyers -> Setting for Default values.
Select or setup a default value and on the "price adoption" tab you may choose how copying of conditions from last purchase order must behave. Select "Do not copy". Then assign this default value to the user, using the EVO parameter.
Prashant

Expense reports with respect to posting date

Hi Folks,
Kindly let us know if any statndard reports are available to extract trip details with respect to the trip posting date (prrw).
Thanks,
Nandagopal C

Hi Folks,
The posting date is maintained in the table PTRV_Doc_header. Using the table we have created a query to fetch the posted trips according to posting date.
Thanks,
Nandagopal C

Exchange rate EURX not calculate exchange rates between USD and GBP

We have set ExRt as following:
Exrt Usage Ref. crcy
EURX EMU EUR
we have "EMU" flag checked also.
We are maintaining exchange rates (EURX) for EUR with all others currencies.
We expected that, if we have a CoCode set in GBP and we post a document in USD, SAP will calculate GBP <->USD from exchange rates EURX(USD/EUR) and EURX(GBP/EUR). It seems to be incorrect because the system is ignoring EURX exchange rates and using "M" GBP-USD exchange rate and this was not expected by us.
Could you please tell me if it is correct to expect SAP calculates USD-GBP Exchange rates from EURX(USD/GBP) Exrate or I am wrong and I need to maintain "M" exchange rates for USD-GBP.
Thanks in advance

Hi,
Please check the following settings :
Go to IMG --> General Settings ---> Currencies ---> Check Exchange Rate types
Select the Exchange Rate Euro and check mark the EMU check box . Save it
Rgds,
Suresh

"An Exchange Rate Does not Exist" error while creating an item

Hi..
Pre-requisites: RMS is installed without base data
We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
Thanks in Advance
Yamini

Also, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
Alan

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Exchange rate difference not going to the correct GL account

Hello,
In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain.
I have also maintained the exchange rates in the transaction OB08.
In transaction F-44(clear vendor), I give the foreign curreny(EUR) in the entry screen. When I do a charge off difference, however, I need to enter the amount in local currency(USD) because our bank operates in the local currency. When I do a document simulate, it puts the exchange rate difference into another GL account (703030 - that we have defined for unauthorized deductions) and not the one defined for the exchange rate difference(702000). This does not happen if I enter the amount also in the foreign currency.
Could anyone tell me the reason for this and the correction measures.
Any helpful suggestion will be greatly appreciated.
Thanks,
Rugmani
Edited by: Rugmani Rajan on Aug 27, 2008 11:35 AM

Hello,
The original problem is resolved. The current exchange rate was not getting uploaded to the system and as a result, the old exchange rate was being used. So it was putting the difference into the other account.
That has given rise to another problem. We use the TBEX to upload exchange rates from a centrally maintained spreadsheet. The upload is giving the following errors:
Securities master data EUR do not exist!
Interest rate master data CNY is missing
Suggestions and correction measures will be greatly appreciated.
Thanks,
Rugmani

How to determine fixed exchange rate or not on contract SD?

Hi all,
I am looking how we can determine if a contract has got fixed exchange rate or not?
In header data (first tab) we can see currency and exchange rate but I do not see a flag (as in PO) for fixing this one...
Thanks for your help.
David31

Hi,
We can check the and maintain exchange rate by following setting,
IMG->SAP NetWeaver>General Settings->Currencies--->Enter Exchange Rates
There are other setting also under the same currencies tab.
Thanks,
Rasik

Exchange rate account not defined

While doing F-04 for a particular bank incoming clearing account, I am getting an error saying : exchange rate account not defined for G/L account and currency INR.
All the postings in the account are in INR and I have also done settings in OBA1 for KDF.
Please help
Thanks

Why would I need to maintain exchange rate settings if all entries are in local currency?
One more observation:
During f-04 clearing, when I toggle between local currency and clearing currency, there is a difference of 25000000.
Any ideas?
Thanks

Exchange rate should pick from TCURR based on custom date field added in MIGO

Hi,
In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
Thanks & Regards
Vinoth Kumar.M

Hi Maniraj,
This will a modification to existing system and it is not supported directly.
There are 2 notes of SAP for modification of translation date of BKPF.
SAP Note 574583 will activate a BADI kindly refer to it for details.
http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
There is another one but is appilcable if material ledger is active in the system
Regards

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Validation of service entry date with respect to po date

i want to validate the service entrysheet date with respect to Purchase order date.
service entry sheet should not be before po date(doc date).
SRVESSR- name of user exit for service entry sheet.
but it is not triggering ,
suggest me how to do .
if sy-tcode = 'ML81N'.
if i_ekpo-werks = '5000' or i_ekpo-werks = '4000' or i_ekpo-werks = '6000'.
    if C_ESSR-BUDAT < I_EKKO-BEDAT.
      message 'Service Entry sheet Psting data should not be before PO Date' type 'E'.
    endif.
endif.

Hi shaiz.
Try to under the concept of schduling During MRP run,
Scheduling will be done for FG with respect to scheduling data maintained for FG material. It will not consider the planned delevery time of its child materail.
Requirement date is created for FG only, on this date FG should be deliverd to stock.
u have to plan raw material to meet requirement date.
System will not reschedule FG order automatically if raw delivery time is delayed it will give exception message only to reschedule. You have to reschedule FG order with respect to delivery date of ROH manually by doing material avilablity check.
I hope this should have given some idea
Regards
Pradeep

Document Type with a later posting date

Hi,
We are on SAP B1 2005 PL50.
We occasionally get the message " There is a document of this type with a later posting date" while posting AP invoices. It happens to some AP invoices only because other invoices get added even though the document is posted with a prior posting date then what is in existence
Please advice, what could be causing this.
Thanks
Asif

Hi Mohamed,
If there is a document existing in the database with a posting date later
than the current one, this system message will pop up.
This system message works based on the following setting:
Under Administration -> System Initialisation -> Document Settings ->
Tab 'General' is a tickbox 'Block Documents with Earlier Date'.
If this box is ticked, the error message 'There is a document of this
type with a later posting date.' is received and the document
cannot be added. This affects the following documents:
- AR and AP Invoice
- AR and AP Credit Memo
- AR and AP Reserve Invoice
If the box is unticked, the system displays the message: 'There is a
document of this type with a later posting date. CONTINUE or
CANCEL.' If 'Continue' is chosen, the document can be added.
It is not possible to turn this off message.
Hope it helps.
Jesper

MIR7 exchange rate is not modefied with respect to posting date

Similar Messages

Maybe you are looking for