New Problem Viewing Honeymoon Phtos...

Hello again,
Well, as stated in my previous post, it looks as if we were able to salvage about 90% of our honeymoon photos off our memory discs. However, we came across a problem.
The way my folders are set up, a thumbnail is viewable as we scroll through the images. Unfortunately, when we try clicking on them, most of them aren't true images. For instance, I clicked on thumbnail and the full sized image that popped up was a jumble of 3-4 unrelated images along the topside and then blank along the bottom. I clicked on another image and it was similarly distorted and also completely washed out.
The thumbnails are fine, and I have no idea why what we see when we click on them is entirely different from the thumbnail. We've tried opening them in Mac's "Preview" program and also in iPhoto. iPhoto gives this message: "The following files could not be imported. They may be an unrecognized file type or the file may not contain valid data."
Any thoughts?
Lisa

Lisa: I hate to say it, but it sounds as though the photos you salvaged may be damaged or corrupt.
You say you can see thumbnails of some or all of those images, so I assume you mean that you are seeing those thumbnails in iPhoto. If you quit iPhoto, and go to wherever you saved the photos as you were salvaging them (before you imported them into iPhoto again), are the images you salvaged still there? Do they open in Preview, and if so, are they correctly displayed?
Important note: I am NOT suggesting that you open the iPhoto Library folder and look at, or try to open, any photos in there using Preview. Don't do that.
When you salvaged the images, where did you search for them with the utility software you used? Did you search for them on the camera memory cards where they were originally stored, or did you search in the iPhoto Library for them? The former is what you should have done. The latter would probably have resulted in your salvaging thumbnail images as well as full-sized images, if it worked at all. PhotoRescue and MediaRecover are designed to extract "lost" images from camera cards, not from hard drives.
Post back with answers to these questions — the information may help us help you more effectively.

Similar Messages

  • I am having problems viewing CR2 files

    Hi,
    I using windows xp service pack3. I used before about 2 years and I never had problems, but now when I uninstall adobe photoshop cs5  because I could not see CR2 files in adobe bridge I tried install again about 3 times and unsuccessful, could you help me please.
    Kind Regards
    Vygis
    Date: Tue, 12 Jun 2012 16:55:49 -0600
    From: [email protected]
    To: [email address removed by host]
    Subject: I am having problems viewing CR2 files Installing Adobe Photoshop cs5
    Re: Installing Adobe Photoshop cs5 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Were you experiencing this message prior to removing Photoshop CS5 Extended?  If not what prompted you to reinstall?  Finally what version of Windows are you using?
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Installing Adobe Photoshop cs5
    To unsubscribe from this thread, please visit the message page at Re: Installing Adobe Photoshop cs5. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

    Are you receiving an error when installing or are you unable to view your CR2 files once Photoshop is installed?

  • New problem of photos looking "splotchy" in imovie but not in iphoto?

    I've made a bunch of home movies in imovie 08 but on my most recent one I have a new problem.
    I noticed a number of photos have what I call a "splotchy" or "granular" look to them. Yet, when I view the same photos in iphoto, they look fine. I notice most of the "splotch" takes place in darker colors, especially blues and such. For example, I was in a photo wearing a navy blue shirt. The stomach to the arm of the shirt looked like I had an enormous sweat stain even though nothing was there in reality. The picture looks fine in iphoto.
    On my camera, I did make one change. I maxed out the pixel count to the highest that my picture allows rather than the one below it. I think the compression is set to the maximum allowed. Not sure if this would impact it.
    When I expert, I use expert settings to go to quicktime.
    Any thoughts as I'd like to avoid this in the future and possibly convert this movie again to avoid the splotches, if possible.
    Thanks.

    Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Link to discussion detail view or flat view gets broken If new subject view is created

    Hi,
    Whenever I try to create new subject view of discussion board with different name, the link to flat view for discussion detail is broken rather it opens the new subject view again. Does anyelse had this problem? and is
    there any solution for this?
    BR,
    Alamzeb

    Hi Alamzeb,
    According to your description, my understanding is that when you click the subject in the new subject view, it opened the new subject view rather than going to the Flat view.
    I could reproduce this issue. To fixing this issue, we need to modify the new subject view, and set it to show this view in the top-level folder. You can do as opening the view->Modify View->Folders, under ‘Show this view’, select ‘In the top-level
    folder’, click OK.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Problems View language change

    How do I change the language in Flex Builder 3 Problems View?
    This is Czech. I don't understand Czech. I want English.
    Can someone please help?

    Hi,
    The DG834G Netgear that I had would not work without the DOS being Off and the Pings being allowed.
    Do you still have the Port Forwarding setting Enabled ?
    I am curious about the VPN.
    Some VPNs are set up with an Internet connection as part of the process.
    It sounds like this one is not. iChat cannot resolve two connections to the Internet (Wifi and Ethernet at the same time for instance)
    The No Data for 10 Secs message means you were connected (even if you did not see any Video or hear any Audio).
    The message means that iChat did not end the chat and that an external event did, such as pulling an Ethernet cable, router failure, turning off the Mac's Airport card.
    DOS work on a threshold basis and if it receives "Too much Data, Too Quickly" it cuts the port that this is happening on to "Protect" the whole connection.
    This threshold cannot be changed and tends to be lower than iChat can Stream video over modern connection speeds.
    I would try two things separately.
    The SIP ALG is something I did not have on my Netgear.
    iChat Uses SIP so I would try it with that ON.
    Also try setting iChat menu > Preferences > Video Section > Bandwidth Limit to 500kbps
    iChat 5 Can "See" your whole Internet Connection speed. (iChat 4 and Earlier was limited to a max of 1.5Mbps set in System Preferences > Quicktime > Streaming - a setting that does not exist in Snow Leopard)
    It could be that the new router allows faster throughput and that you have moved to iChat 5 meaning you are bumping into the DOS threshold.
    Of course the issue could be at the other end. The log is not that specific about which end "Cut" the connection.
    7:34 PM Sunday; July 25, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • How do I blacklist sites from appearing/being screen captured in the new tab view (Banking/Social media/Etc...)?

    When I was checking out the new tab view this morning, I noticed that there were screenshots from by accounts page on my banking website. I turned off the tiled display, but they came right back when i turned it on again. the problem is 1) I don't know where these screenshots are being stored, and how detailed they are (the thumbnails are blurry, but recognizable to me) and 2) how do I blacklist a domain from being screen capped for this purpose at all? The screen capture seems to not be related to having the tiles show up in the tab, since they came right back after toggling this setting.

    these screenshots are stored in your browser's cache at the moment, but in future versions of firefox they will (together with the previews for tab panorama) be stored as plain picture files in a folder in the local applications data folder of windows & the number of screenshots will be optimized (reduced). the resolution is quite low, they are only available in the blurry format you already see.
    you can remove sites by clicking the x button on the thumbnail - this will be remembered in a blacklist, however i'm not sure if this is affecting the whole domain or just the exact url (i suspect the latter).

  • New problem w/ Safari opening gifs

    I am having a new problem with Safari that I didn't have a couple months ago. On a certain websites if I open an image of a product to make it bigger, instead of a larger image I now get a window opening with no image. Instead in the example below all I seem to get is an image 4x4 pixels (at least that is what the new window title says). This occurs with any browser I have tried in OS X including iCab, Opera, and Firefox. However, using OS 9 Classic (and Windows), all the browsers bring up the enlarged image perfectly. My current settings have Javascript on and popup windows are allowed. I can't figure out what is going on here. Any suggestions for a fix would be appreciated.
    Here is a link to an example where at the bottom there are images to enlarge a watch:
    http://www.ireplicastore.com/BR01-97-Power-Reserve/SS-Casing-White-Dial.html

    You don't need to disable your pop-up blocker. All the small images have is a link to a larger .jpg image on their server. I have no problem viewing them.
    So, having said that and noted that you are also on a G5 and 10.4.11, I can suggest the following:
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5.2, but please see my footnote).
    Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
    The new RealPlayer Plus (v.11) is still in beta and therefore free, but works well on Tiger. It includes a download function, and you can get that here:
    http://uk.real.com/player/mac/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
    In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
    If you get problems with viewing video on a website try moving this file to your Desktop:
    Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
    and then restarting Safari. If all now works, you can trash that file.
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
    There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
    On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
    On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back.
    FOOTNOTE
    If you are running Leopard:
    Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

  • Problems viewing Palladia HD channel

    Very recently, I am having problems viewing the Palladia HD channel.  I can view the channel for a few seconds, but then I get a pop up on the screen that my set top box can view the channel and I need to upgrade my STB. (I can view other HD channels just fine).  I follow the on-screen instructions for upgrading the STB and it tells me that my STB is up-to-date.  Anyone else run into this problem?

    Woburn Mass Fios customer.
     I had received the same screen message "setup box can not view the channel,need to upgrade the sdp box. I clicked the on screen ok and response was my box was up to date.
    I called Verizon tech support today and talked with an engineer, he was unaware of the issue or error message. I told him what I had read here (model numbers QIP6200, mpeg4 format ,etc) but nothing registed with him. I calmly described the issue, the screen notifications and the response, he said he can only help if I have a technical problem and any box upgrades are handled by billing. transfered to billing, explained it, again, again never heard of it but they did find a tech who understood the problem.
    Once I was connected with this tech (Jerry) , he understood and said a new box is on its way, the old 6100 series could not handle the new format and the new box would be a 7100 version 2. He said that the local provider is switching the channel format to a better stream method so that bandwith method would be reduced with no quality concerns over HD picture. . He also said that the conversion of most channels will occur within the next year or two and that there are other channels like Palladia that would require the new box. I've only run into this error with Palladia on my system at this time.
    I asked him why some people I talked to earlier did not know anything about this issue and he said they must have been new and the box limitation was known for at least six months.
    Suggestions to Verizon:  Perhaps an internal tech alert may or should be in the works.
    Also fix the on screen automated help menu's as if it worked, I would have had a box on its way a week ago without spending an hour of my life talking to customer service today. It wasted their and my time.
    Note to billing person, your system must be slow but the minutes of silence while you checked out my account had me wondering if I was on hold or mute. Introduce either background music or some verbal communications letting me know each step of the way would be nice.
    Also no offers of free movies or other special deals. I'm hurt as you guys usually rock with the offers.

  • HT2905 Many (most) of my songs in my library have multiplied. I now have doubles and triples of my music. I don't know why it has done this or how to fix this problem. This is a new problem since I synced a new ipod touch this week.

    Many(most) of my songs in my library have multiplied. I now have doubles and triples of my music. This is a new problem that started this week when I synced my new ipod touch. Why did this happen and how do I get rid of it. I have around 1400 duplicates in my library now.

    I suspect in this case the problem is caused by your library and device having downloaded independent copies of the media, so that when the library connects to the device it copies over your purchases not realizing they are already in the library.
    When deduping use Shift > View > Show Exact Duplicate Items as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • New problem...SSD drive is no longer recognized

    OK, I was having the memory issues so I went out and bought new memory that is supposed to be compatible (GSKILL 2x4 MB 1333 DDR3), and now I have a brand new problem.  My SSD is no longer recognized, so I can't boot my OS.  I've tried swapping ports, swapping cables, cleared CMOS...I even put the WINDOWS 7 Disc in to see if it would find the drive in the install screen, but it says no hard drive found.
    Anybody know the issue I may be having now?

    I had a similar issue, my BIOS wouldnt recognize my Intel X25 after a blue screen in AHCI mode.
    In the BIOS I had to switch the controller type to Standard IDE. This made the drive visible again but to make it operable under AHCI, I had to use a Hex Editor from a DOS Boot Disk, and manually erase the first few sectors of the drive.
    Then I could switch the controller back to AHCI in the BIOS and repartition/reinstall Windows - Until the next blue screen .
    Obviously, doing this erases the MBR, allocation tables and partition table, and therefore makes ALL data on the drive inaccessible.

  • New problem printing from InDesign CS4 in Lion

    After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from  InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
    "Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
    This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
    I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
    I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
    Any help would be greatly appreciated!

    mmsteer,
    I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
    Remove the Adobe PDF PPDs from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    Be sure to go to your system Library, not your user Library.
    Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
    Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

  • Can new PWA views be created whereby a filter can be set and associate to the view by default? (Project Server 2013 ONLINE)

    My main question is: Can new PWA views be created whereby a filter for that view can be set, and associate to the view by default? (Project Server 2013 ONLINE)? and can I have a filter set to filter on person logged on to...
    In previous versions of Project Server, when CREATING a PWA view, we were able to apply/ define a filter for that view.  Does not seem like it is the case in Project Server 2013 Online.  And if I remember, we could also use the URL Guid_view_id. 
    Please confirm; and / or tell me how-to.
    What I was hoping to do is the following... Given that our standard that we have adopted for reporting time is 'My Timesheets' (fyi, Single Mode Entry=ON), we have some resources who have others who do it on their behalf via 'My Tasks' (ie., accomplished
    by using the 'Assignment Owner' field, accordingly).  Therefore, when entering time on someone else's behalf within 'My Tasks', we like to present the user that is logged in only the tasks that they are are assigned to update on others' behlaf.
    I know that there is another more elegant approach to doing this which may be to use the Delegation feature. But since we are trying to stick to Sharepoint Security mode for now, this is not an option for the time being.
    Any help appreciated would be greatly appreciated.
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Hi Spiro,
    1- You still can define in Project Online a filter in the view settings, it is located just above the category setting. Here is a screenshot of the summary project center view:
    2- The view GUID is not anymore in the URL, since the URL triggers an action only on the webpart and not on the whole page. I agree this is annoying since it was great to send a URL with a specific view.
    3- Concerning the access to my timesheet versus my task, I'm not sure to get a full understanding but on a general way, it is much more easy to deal with those situation using categories which you cannot do with the SP permission mode.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

    New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
    iPhone 5s
    Software - IOS 8.1
    iTunes - v12
    I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
    I have restored my phone but still has same problem.

    Your IT person is an idiot.
    http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

  • Two new problems with the Quicktime Plug-in

    I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
    First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
    There is just nothing on the spot where the embedded Quicktime player should be.
    Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
    everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
    embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
    problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
    to the Quicktime Plug-in.
    Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
    in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
    Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
    I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
    whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
    occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
    I think these might be the problems with the new Quicktime Plug-in 7.7.1.
    Please check about these problems and solve them on the next version of the Quicktime Plug-in.
    I will give you a couple of hyperlinks so that you can check about the problems directly.
    http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
    ↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
    http://blog.daum.net/wellabc/15434322
    ↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
    p.s: I am sorry that I am Korean.

    I recommend that you repeat all this via
    http://www.apple.com/feedback/quicktime.html
    to make sure that Apple will see it.

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

Maybe you are looking for

  • Problem with earbuds

    I have an I pod shuffle, and there is a problem with my earbuds. The button that controls the volume and changing the song. It doesn't work too well, in that i have to hold the ipod in a specific position and turn the plug for the buds in a highly sp

  • Is there any way to ship faster, Is there any way to ship faster

    Can I get I pad 2 within 2-3 days from buying date ?

  • Handling fee to go 2 times in account

    Hi, I have a return order ZRE1, the pricing procedure assigned to it is ZSE001. A snapshot of ZSE001 is-- 1. ZDGR Gross Price ERL(Act key) 2.ZKD1 Handling fee ERS ZKD1 is maintained as -/+ values in percentage. Now the client requires- 1. ZKD1 value

  • Cross-Aggregation-Level Selection Evaluation indicator

    Hi,           Can any one explain me the meaning of the below statements in the two paragraphs. This is for "Cross-Aggregation-Level Selection Evaluation indicator" in alert monitor. If the Cross-Aggregation-Level Selection Evaluation indicator has n

  • Long list of Dev. presets back.

    Oh, the long, long preset list is back! I had edited all of the Develop Presets out, and saved a copy of the Develop file before the last update. I tried to reuse this file now, with the 3.4 update, but LR will not launch with this file. I can not ed