New publishing problem

After finding it impossible to publish my new iWeb site to MobileMe I deleted it and started again, rebuilding and uploading page by page. Until last night this worked. Nine whole pages uploaded! But today nothing is publishing. I've tried again and again, and hours pass. The little white wheel goes round easily enough, if sometimes very slowly, but always freezes at the very last tiny section and goes no further. I've even tried to publish a blank white template page with just a little bit of type in a text box - same result.
Any ideas, anyone?
(The MobileMe frustrations continue!)

I love Apple, but my advice would be to not use mobile me for hosting at this time.
Do a search with keywords like "publishing errors", "why can't I publish", etc and see for yourself. Lots of other hosting options out there with more things to offer and less headaches.

Similar Messages

Unexpected Publishing Problems

I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
Please help me!
Ruben
G4 17 inch Powerbook Mac OS X (10.4.5)

Here's the latest...
I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
Wish me luck all. I'll keep you posted.
Ruben

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

Help, about 'new publishing request' as a prerelease program

Can I apply a single issue as a prerelease program?
I sent a request mail to [email protected]
But, there's no answer still in a week.
Is there any problem?
help

Yes, Bob.
My co-worker sent a 'New Request' mail.
but, she doesn't receive any answer.
from "[email protected]"
first time, she sent a mail in 1week ago, 4/27 06:33
second was sent at 5/2 20:25
(GMT+9:00)
same subject : NEW PUBLISHING REQUEST
same content : application name, due date, conteact info, and type of issue.
And she joined in a prerelease program at last week.

Another user with publishing problems -- proof that it is .Mac related

Just before Christmas I started getting the dreaded "Publish Error: There was an error updating .Mac" message every time I published. I read all the previous posts, even the ones dating back to October. I think I can conclusively show that the problem is on the .Mac backend, and not at all on my computer. Here is what I did: first, I created a temporary .Mac account; second, I moved my Domain file for safe keeping and did not replace it; third, I logged into the Guest User account that is now available in Leopard. I then attempted to publish a single page website from iWeb from both my normal login and the guest login to both my normal .mac account and the temporary one. (To switch between .Mac accounts I used the system preferences panel when iWeb was not running). The results are as follows:
.......................Regular .Mac.......Temporary .Mac
Normal Login..Publish Failed......Publish Succeeded
Guest Login.....Publish Failed......Publish Succeeded
This tells me that there is no problem on my computer, or with my network connection, and the problem is squarely on the .Mac side of things.
I sent this message off to the standard help page, and got the standard form letter back. In reply I asked them to reset my .Mac account so it would appear "new". I'll see what they say.
It would be interesting to see how many other people with "publish" problems can repeat this test.
-=[doug]=-

I've done what appears to be the standard littany of things:
1) Confirmed that I am running the latest version of iWeb (2.02) on 10.5.1 (although the problem persists when using my backup of 10.4.10 that includes the ilife update)
2) Changed my .Mac password, even though it was less than 20 characters
3) Published all of my previous website to the temp .mac (in chunks to avoid the space limitations)
4) Successfully published my site to a folder
5) Successfully uploaded that folder to my iDisk
6) Attempted to republish and republish all multiple times
7) Deleted iWeb's plist
8) rebooted
9) logged out and back into my .Mac account
10) confirmed that there is no password protection on my site
11) confirmed that there are no comments on my site
12) deleted assets.[membername].plist from the Domain file
13) Confirmed that my password in Keychain is correct
14) Run Keychain First Aid
15) deleted Sites.RSS from my iDisk
16) deleted the website and index.html from the iDisk
So, I have done a fair amount of ground work here, and am not just spouting off against Apple/.Mac. However, I still claim that the fact that I can successfully publish to a temporary .Mac account while the exact same iWeb content fails when being published to my normal .Mac account implies that there is something wrong with my .Mac account -- it is almost as if Apple is trying to eliminate its paying customers (since there are no problems with the free account).
-=[doug]=-

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

Was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. help!

was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?

Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
What version of Indesign?
What OS? "Rights" sounds like Windows
What is happening when starting it?
If Windows, where was it installed?
If Windows, do you have admin permissions?

Publishing Problems - a Solution?

For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

My message to Apple stated:
"My pages go through the "create" process then start
on the "publishing" process then come back with an
error message that tells me to check my internet
connection (which is fine at 2 different locations. I
spent 13 hours fighting this yesterday. It has
created a major problem for me -- and this just after
I paid an extra hundred dollars to upgrade my
broadband. Your telephone people tell me you're
working on this. Please advise when it will be fixed
so I don't waste another 13 hours today."
Regards,
Richard M.
Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
— Lorna in Southern California

New year problem? - files 'deleted'

i open up an aw file - make changes - try to save - get a window that says file has been deleted - cannot save as either - and other funny garbled window mesages appear when i try and open other aw docs - evrything else is fine
seems like it could be some sort of new year thing -
any ideas what to do

New! Re: new year problem? - files 'deleted'
Posted: Jan 1, 2006 10:33 AM in response to: heidig
Reply Email
Hi Heidig,
Welcome to the discussions and the AppleWorks Forum.
It's unlikely that this is a "New Year's" issue. The most probable cause is a corrupted preferences file.
Check Peggy's post here:
http://discussions.apple.com/message.jspa?messageID=607287&ft=y&#607287
Regards,
Barry
For future reference: Using the search feature can lead to a quick answer to many problems. For this one, a search, restricted to the AppleWorks forum, using "has been deleted" (without the quotes) brought up four posts on this topic, including a reference by Peggy to her User Contributed Tip, on the first page of results.

Contribute CS4 and CS5 file transfer (publish) problem on Windows 7 64 bit

Have a problem with Contribute CS5 and CS4 on Windows 7 64 bit where upon editing a webiste for example to add a new page (or edit an existing one) and then clicking on "publish" a blank page appears on the website. To explain this further, If i make the required changes to the page and select the option to publish the file later then the file wirtten to the PC appears to be ok and has all the changes, but as soon as I publish it, only a blank page appears on the web server. ie the upload (ftp) process does happen but the content of the page is being stripped out somewhere during the filt transfer process.
I have editied the same site with CS4 on windows XP without any problems.
Any suggestions would be appreciated
Thank you
Chris

I seem to have solved the issue by downloading this install file
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
which installs successfully.

Publishing Problem with WTP and Tomcat 5.5

Hello you all,
I've got the problem that my Eclipse does not publish my Hibernate (*.hbm.xml) files.
In the concerning folder, I do only find the .class-files.
We're using Eclipse (3.3.2), Maven 2, Tomcat 5.5
Urgend help is needed as we have to distribute our Software till the end of the week :(
Thanks in advance

I'll try reposting, now that I figured out how to format it:
import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.SynchronousQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
public class ThreadTest {
     private static final int MAX_RUNNABLES = 1;
     private final List<Runnable> runnableBuffer = new ArrayList<Runnable>(MAX_RUNNABLES);
     private final ThreadPoolExecutor myThreadPool =
          new ThreadPoolExecutor(MAX_RUNNABLES,
               MAX_RUNNABLES,
            0L, TimeUnit.SECONDS,
            new SynchronousQueue<Runnable>());
     public ThreadTest() {
        //myThreadPool.prestartAllCoreThreads();
        for (int i=0; i<MAX_RUNNABLES; i++) {
            runnableBuffer.add(new Runnable() {
                public void run() {
    public void start() {
        for (Runnable r : runnableBuffer) {
            System.out.println("corePoolSize: " + myThreadPool.getCorePoolSize());
            System.out.println("maxPoolSize: " + myThreadPool.getMaximumPoolSize());
            System.out.println("poolSize: " + myThreadPool.getPoolSize());
            System.out.println("taskCount: " + myThreadPool.getTaskCount());
            System.out.println("Starting runnable ");
            System.out.println("");
            myThreadPool.execute(r);
        System.out.println("All runnables have started");
    public static void main(String[] args) {
        ThreadTest t = new ThreadTest();
        t.start();
}

How do I get my new published website to show up from "view my Website" ?

I created a website a few years ago under Verizon and have since unpublished it. I started a new website which I've worked on a little and now published it. When I click "view my website" on verizon's website the old one shows up. When I click the "edit my website" the new one comes up. How do I get the old one to go away. It does not show up on my list of websites only under the view category. I have cleared my entire cookies/temp/cache. What next?

I'm a new Site Builder user, but I've seen a similar error.
I Published a test site to Myname (Root) webspace, then deleted it. Then I made a new site and Published it to Myname/new-directory. I've tried to change the PersonalWebSpace 'Update Settings' option to point to new-directory/index.html. But when I use PWS 'View my Site', it shows me the OLD test page!
A related problem - I saved a Site Builder 'Copy' of my site for backup.
I might want to Publish the copy in a different directory name, but if I 'Publish' the copied site, it does not ask me for a new name - it just OVERWRITES my operating site! Any way to work around that?
Or isit just that Verizon and Trellix bit me? ;-P

Creating new publishing page and viewing Properties throwing exeption

Hi,
I am creating new OOB publishing page using “Article Page” layout.
Please note Versioning and approval enabled on this “Pages” library. Also there is no workflow attached to this.
Steps I am following:
Goto Pages library.
Create new Article page from add new item
After that select that item and click on “View Properties” button from top ribbon. please not I have not checkedin page yet. It’s throwing exception as below.
System.ArgumentException: Item does not exist. It may have been deleted by another user.
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc, Boolean bExpandQuery)
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc)
at Microsoft.SharePoint.Publishing.CachedListItem.FetchAllFields()
at Microsoft.SharePoint.Publishing.CachedListItem.GetFieldContents(String index, Boolean refetchIfFieldNotFound)
at Microsoft.SharePoint.Publishing.WebControls.SummaryLinkFieldControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Microsoft.SharePoint.We...
896a6c9c-e172-e000-b2f5-76c261783eb4
however same steps followed in our DEV environment and seems ok. only this issue with our another environments.
Also once I check in page and then goto "View Properties" then it's working.
Thanks in advance! Br,KS

Do you have any workflow on the publishing library? The error you mention I've seen sometimes when uses have created workflows that reference custom columns which are then deleted or removed.
Additionally, if a user has insufficient permissions to start an attached workflow, this error can also be encountered.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Publishing Problems with iWeb '08

I have two separate sites (one existing and one new) that I can not publish to MobileMe or to a folder. I can not figure out what the problem as they are very simple sites. I have deleted preferences, rebuilt permissions and reinstalled iWeb. Any ideas or suggestions would be welcome. The Console logs are below:
4/6/09 17:10:43 iWeb[4255] Assertion failure: Method: siteStateObjectForKey:
Object: <HESSiteScriptManager 0x1cc8a820>
File: /SourceCache/iWeb/iWeb-359/src/iweb/Publish/State/HESSiteScriptManager.mm
Line #: 600
Invalid parameter not satisfying: inKey != nil
4/6/09 17:10:43 iWeb[4255] Assertion failure: Method: setSiteStateObject:forKey:
Object: <HESSiteScriptManager 0x1cc8a820>
File: /SourceCache/iWeb/iWeb-359/src/iweb/Publish/State/HESSiteScriptManager.mm
Line #: 607
Invalid parameter not satisfying: inKey != nil
4/6/09 17:10:43 iWeb[4255] EXCEPTION RAISED during Publish:
** * -[NSCFDictionary setObject:forKey:]: attempt to insert nil key
4/6/09 17:10:43 iWeb[4255] Publish error: An unknown error occurred.

Try the following: delete the iWeb preference file, com.apple.iWeb.plist, and clear out the User/Library/Caches/iWeb folder, reboot and try again.
Note: If you keep your domain file anywhere other than the User/Library/Application Support/iWeb folder you'll need to find it and double click on it to open in iWeb.
OT

Publishing problem for v.10 and above - works fine in v.9

Hi,
I have this strange issue when I try to publish for v. 10 or above (which I need to get support for TLFTextFields). It works fine in v. 9. My Flash application runs, but there are two critical differences (making it unusable):
i) there is a complex vector (a geographical map, with each country or map area in a different color) which is either rendered as a bitmap and looks very blocky, or it does not display at all. Even when it is not visible, mouse-over events for each map area still trigger. This map should be displayed as a vector, and is displayed correctly in v. 9.
ii) the width no longer stretches to full-screen - but remains fixed width.
All I'm doing is publishing one version up - no other changes. It looks a bit as if I am publishing in AIR for iOS, but I'm not - I selected Flash Player 10.3 (or 11.1, 11.2, 11.3, 11.4 - all the same results).
I tried uninstalling and reinstalling Flash, deleting and restoring default preferences, copying the code into a whole new Flash file, removing TLFTextFields. Nothing has worked so far.
Many thanks for any advice!
Frank

Here is a list of deprecated elements of AS3.
Some classes that would work under Flash 9 wont work when targeting 10:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/deprecated.html
Maybe that gives You an idea, where the problem lies
This gives useful tips when using non-latin charctersets and swapping languages on the fly, that are loaded from xml files.
http://www.mikeziray.com/2009/10/19/dynamic-textfields-in-flash-as3-and-their-bugs/

New publishing problem

Similar Messages

Maybe you are looking for