New to EEM, i wanna soft reset BGP when a prefix list is applied

Question

Hello,
This is my script:
event manager applet SOFTRESETBGP_IN
 event cli pattern "neighbor 10.0.0.2 prefix-list.* in" sync no skip no period 1
 action 1.0 cli command "do clear ip bgp 10.0.0.2 soft in"
 action 2.0 syslog msg "BGP PEERS SOFT RESETED IN"
event manager applet SOFTRESETBGP_OUT
 event cli pattern "neighbor 10.0.0.2 prefix-list.* out" sync no skip no period 1
 action 1.0 cli command "do clear ip bgp 10.0.0.2 soft out"
 action 2.0 syslog msg "BGP PEERS SOFT RESETED OUT"
When I issue the "neighbor 10.0.0.2 prefix-list A in" command it displays the pre-defined syslog msg, but the peer is not reseted.
Test:
R1(config-router)#do sh ip bgp
BGP table version is 7, local router ID is 10.0.0.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
     Network          Next Hop            Metric LocPrf Weight Path
 *>i 2.2.2.2/32       10.0.0.2                 0    100      0 i
 *>i 22.22.22.22/32   10.0.0.2                 0    100      0 i
R1(config-router)#neighbor 10.0.0.2 prefix-list A in
R1(config-router)#
*Jan 10 13:58:57.663: %HA_EM-6-LOG: SOFTRESETBGP_IN: BGP PEERS SOFT RESETED IN
R1(config-router)#do sh ip bgp
BGP table version is 7, local router ID is 10.0.0.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
     Network          Next Hop            Metric LocPrf Weight Path
 *>i 2.2.2.2/32       10.0.0.2                 0    100      0 i
 *>i 22.22.22.22/32   10.0.0.2                 0    100      0 i
R1(config-router)#
When I do manually clear the peer, the policy applies:
R1(config)#do clear ip bgp 10.0.0.2 soft in
R1(config)#do sh ip bgp
BGP table version is 8, local router ID is 10.0.0.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
     Network          Next Hop            Metric LocPrf Weight Path
 *>i 2.2.2.2/32       10.0.0.2                 0    100      0 i
I have also tried to clear both direction without ".*"
event manager applet SOFTRESETBGP
 event cli pattern "neighbor 10.0.0.2 prefix-list" sync no skip no period 1
 action 1.0 cli command "do clear ip bgp 10.0.0.2 soft"
 action 2.0 syslog msg "BGP PEERS SOFT RESETED"
result is the same...

Answer 1

skip no means: execute the command (you can skip it)
sync no means: you have to execute the CLI command, then the EEM script runs
example to skip: 
R1#sh running | b event
event manager applet OSPF
 event cli pattern "clear ip ospf process" sync no skip yes period 1
end
R1#clear ip ospf process
R1#
without "skip"
R1#sh running | b event
R1#clear ip ospf process
Reset ALL OSPF processes? [no]: y
R1#