New to the SRM

Hi All,
I am new to the SRM.I have 2 years of Exp in SAP MM. Now wanted take SRM.
Please help in guiving some guidence.
thanks,
Raju

Hi,
You can find all the config guides at https://websmp201.sap-ag.de/ibc
Please look at:
http://service.sap.com/instguides
mySAP Business Suite Applications -> mySAP SRM -> mySAP SRM Server 5.0
Download MasterGuide and scenario-specific instructions.
Follow this link for detailed understanding of srm business process.
http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
The below link will have the total documentaion about SRM
http://help.sap.com/content/documentation/erp/docu_sbs_erpsrm.htm
http://www.sap.com/solutions/business-suite/srm/technicaldetails/technology.epx
http://www.ies.state.pa.us/srm/cwp/view.asp?a=3&q=197102&srmNav=
Please check the wiki.
https://wiki.sdn.sap.com/wiki/display/SRM This is good starting point.
BR,
Disha.

Similar Messages

Steps for extraction of Custom Fields from the SRM 5.0 to the SAP BI system

Hi Experts,
I am new to the SAP BI. I was asked to publish all the custom fields from table (BBP_PDISC) of the SRM system to the BI System.
Please provide some guidiance (or) provide me with step-by-step procedure for doing the same.
There are around 14 fields in this table and i need to move them to the BI system and later inlcude them in reports.
Let me know if this information is sufficient.
Thanks in advance.
SAPBWI

We are working on the Shopping cart DSO

Custom screen field in the SRM portal screen for Business Partner Bidder

I need to add a custom screen field in the SRM portal screen for Business Partner. I have added this custom field in the include structure: CI_EEW_BUT000 and activated it.
I was expecting to see the enhanced field available in the SRM portal screen when I create the bidder. But is not available.
The new field are available if I edit an Business partner only.

Hi,
Please look into the following OSS Notes:
Note 675800 - Business partner enhancement SRM on maintenance screen
Note 672960 - User-defined fields 2
Thanks,
Pradeep

Create and assign new user in SRM org struct when HR Distribution is active

Hello experts,
In SRM HR Distribution list is active.
Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
Thanks!!
Sunny

Hello Sunny,
As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
Again there would be few user which you would create in SRM evironment and those would be administator specific.
Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
Changes in HR structure include modifications (add/modify/delete) in the following:
u2022 Organizations
u2022 Jobs
u2022 Positions
u2022 Employees
A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
Thanks,
Yatin

Knowledge documents in the SRM SDN Wiki

Dear Contributors,
You are invited to visit our new [SRM SDN Wiki|http://wiki.sdn.sap.com/wiki/x/nhY|Click here to open the SRM SDN Wiki].
There you find knowledge documents and answers for frequent upcoming questions around SRM in a structured form.
Are you top contributor and do you answer the same questions in the forum again and again?
Share your knowledge in the SRM SDN Wiki by creating a new page, and you just need to reference it next time by answering questions.
Best Regards
The community team

Hi
Welcome to World of SRM !!!
Which SRM version are you using ?
Please go through the following links for more details and sample code as well.
Re: Problem in badi for sourcing worklist 'BBP_WF_LIST'
Re: How to prohibit Good Recept
Re: BADI BBP_WF_LIST implementation
Re: Confirm Goods / Services Centrally - BBPCF03
Re: Confirmation
Re: Worklist for confirm goods using BBPCF02
Let me know incase you face any issues.
Regards
- Atul

Can you any one help to get the SRM - SAP Enterprise Buyer Troubleshooting

Hello Guys,
I am new to this SRM - SAP Enterprise Buyer Environment, I need to present troubleshooting idea to my higher level guys. Basically I am working in the area Basis.
Kindly help to get some useful documentation.
Thanks
Chilva.

hi,
i am sorry there is no documentation available for trouble shooting.
for Most of the problems , you have to check out the standard sap notes , sap help , configuration guides specific for srm.
thats what we used to when i was doing trouble shooting customer issues.
hope this helps.

New buttons on SRM contract screen? (+)

Hello,
I'm asked to add specific button into the SRM contract screen (BBP_CTR_MAIN transaction). I've been trying to use BBP_CUF_BADI, but achieved none - my customer screen is not displayed at all. However it is called - I've checked it using the debugger. What am I doing wrong?
Thanks in advance.

Hi Cyrill,
Please go through the following lnks,
Add a new button to BID Invitaion
Add customer button to check status screen
Hope it helps.
Thanks,
Pradeep

Is it possible to add new mappings for SRM?

I am looking to replicate some of the "Request for Quotation" creation/management functionality from SRM in a custom application (for business/technical/ease-of-use reasons) and send the created RFQs over to SAP SRM. Can I use XI to send RFQs into SRM (I know I can retrieve them using XI for custom supplier apps, but can I send them in as well)?
While reviewing the EBP mappings in Integration Builder, I see there is a mapping for RequestForQuotation_Create_Out, but not for RequestForQuotation_Create_In. Is it possible to add this mapping? Or in other words - is it possible to create new mappings for SRM in XI that are in addition to the standard mappings that are shipped with SRM/XI? 
Thanks for your help in advance.

Hi Osvaldo,
I see there is a mapping for RequestForQuotation_Create_Out --> I dont think you can find a mapping for the same. RequestForQuotation_Create_Out should be the name of the interface(outbound). What it means is you can have your own custom defined inbound interface and perform the mapping on your own in a new SWC. Pls update me if you can see a mapping for the same. Also you can have yor own interfaces and mapping in your SWC apart from the standard as suggested by Bhavesh and Abhy.
Take care while desingning the interface for SRM part coz SRM has the ability to output in XML format. Check this functionality first and start designing your interface.
Update us if you have more querries.
Regards,
Jai Shankar.

New to SAP SRM

Hi
I am new to SAP SRM. Could you send me some certification or other useful material.
My mail ID is [email protected]
Thanks,
Sasi
Edited by: Sasi Reka on Mar 6, 2008 8:57 PM

Hi sasi,
Could you please make me the documents
My mail ID is [email protected]
regards,
Sourabh
Edited by: Sourabh Kothari on Mar 17, 2008 10:53 AM

New to the WRT300N - Firmware & help needed

Hi. First off, I apologize that this is going to be very long. I really hope someone will take the time to read it all and give me some help.
I posted about a week ago about problems with my WRT54GS. All of a sudden with no changes, the wireless stopped working. I tried for a few days to fix it with no luck. I decided to order the WRT300N (I figured if I was going to buy a new one, I'd upgrade and this is the one that Linksys recommended).
I should mention that after ordering the new router, the wireless on the old one started working again but it wasn't working normal. The signal quality had always pretty much been excellent and now it started going up & down but at least it was staying connected.
The new router came today. I disconnected the old one and connected the new one and everything went smoothly. Both my wired & wireless computers worked great. Less than an hour later, the wireless disconnected. I went to view available networks and my network (I use our last name) was gone. I shut off the laptop and it still didn't see the network. So I started looking at the router settings just to be sure that nothing had changed. About 15 minutes later, the laptop found the network and connected again. The signal quality dropped to good and has stayed there ever since.
Just for information, when the laptop is on the desk (which it is 90% of the time), it's only about 5 feet away from the router. I have not tried to take the laptop out of the room yet. Also more information if it helps. I have a large "U" shaped desk. My monitor for my desktop sits in the middle. On either side are the speakers. To my left (in front of me) is a UPS (plugged into this UPS is the tower, monitor, speakers, cradle for my mouse, modem & router), then the tower (I can't put it on the floor because I have physical issues that would prevent me from accessing it there). Now if I turn my chair to the left, the desk has an upper level. This is where my DSL modem & the router are. They are on the end near where the computer is on the lower level. This is the same setup we were using before. Old router worked great for almost 2 years with signal strength at excellant on the laptop. It just started acting up all of a sudden. If I go back to facing center and then turn to the right, that's where my husband's laptop sits. The only other equipment there is a calculator and a lamp and on the floor is another UPS which has his laptop (which has an Intel wireless G card in it), a laser printer, and the above mentioned calculator & lamp plugged in.
Prior to today, I had the Logitech MX3100 keyboard & mouse set. I had purchased a new mouse (Logitech MX Revolution). So I was using the keyboard from the MX3100 with the new mouse and everything was fine running that way for weeks before the problem kicked in. So I don't think it's got anything to do with the mouse. Today's setup is a little different. I am no longer using the MX3100 keyboard. I am using Logitech DiNovo Edge, which uses a bluetooth dongle. I also don't think it's any interference from this keyboard since this is a pre-existing problem.
I do have a cordless phone in the room (it's on the left hand side of the desk from where I sit at the opposite end from the modem & router...also it's one of those that doesn't need a phone line)but it's a 5.8 ghz.
The old router had the option to change the channel, etc. This one has auto for standard channel & wide channel & there's no way to change it that I can see. Radio band is also set to auto but does have 2 choices under it (standard & wide). As I said before, I use our last name for our SSID. It's the same one I've been using for years. There is no one else around here with that SSID. Network mode is mixed.
Concerning the firmware....the information for mine is WRT300N V1.1 firmware v1.51.2. I tried to look for an update but the only one in the list is the WRT300N V1.0. I did click on that but the firmware version is lower and I don't want to screw anything up. Is there a firmware update for me or not? If so, please point me in the right direction as I can't find it.
Concerning the signal strength....would it help to buy a new wireless card for the laptop? The Intel card has been updated with the newest software. The card is internal and to my knowledge can only be replaced with the same card or a bluetooth card. (Computer is a Dell XPS M140.) I do have a card slot but I'm confused because I think Dell called it an Express Card slot and I don't know whether or not the Linksys notebook card that is recommended for this router would work in this slot. If the card would work, is it worth the expense?
What else can I try. I thought about moving the router furthur to the left but it would require moving a few other items and I'm not sure if the cords are long enough. Would it help if the router & modem were not plugged into the same UPS? I do have a regular surge protecter near where my phone is. I would really rather leave them plugged into the UPS though for obvious reasons.
Also if it helps, I have the router on it's side with the 2 antennas on the end pointing straight up and the flat one in the middle I have angled this way.
I hope I have given enough information for some suggestions.
Thanks,
Lisa

Thanks for the response. I was wondering if anyone would take the time to read such a long post. I wanted to be sure to try to give as much information as possible.
My desktop (Dell XPS400) tower is made out of metal...but the router is actually not sitting on it. There is a shelf to the left of my tower (when I'm facing it, otherwise it's to the right of it). That's where the modem & router sit. The shelf sits about 3" over from the edge of the computer and it's about 7" above it.
As far as the wireless card for my husband's laptop...I'm still thinking about it. I'm wondering if there would be any improvement in speed or the quality of the connection with the N card.
Now I just went into the router's settings and tried to make the changes you suggested. I was able to change the radio band from auto to wide BUT once I do that, I loose the ability to leave the wide channel & standard channels on auto. The options for the wide channel are 3-9 and the standard are 1 & 5. I don't know which ones are best to pick so for now I'm not changing anything. I didn't change the advanced settings either as I wasn't sure if I could do that without changing the other settings first.
My husband has noted that he does see the quality of the connection occasionally jump to excellant. For the most part it's staying on good in here. We haven't brought it out into the living room yet to see what it does out there. He hasn't needed to. He has had it disconnect on him a couple of times as well.
I did forgot to mention in that book I wrote that we do live in an apartment building. We are on the 1st floor in the back of the building. Our office is between our living room & another bedroom. There is an apartment above us. There is another apartment on the other side of the other bedroom. Our bathroom is across the hall from this room, other side of that is the kitchen and then there is an apartment in the front of the building. Our front door is off the living room, a hallway seperates our apartment from another one. There are 4 apartments on each floor. Laundry (directly under us) & storage in basement.
I give all these details to try to get the best help. I don't know if all this extra info is helpful or not. We have been using Linksys routers for quite a few years now. This is our 3rd one and our 2nd wireless one. We have been in this apartment for a year now and had no trouble until a few weeks ago. Previously lived in another apartment of the same floor plan in the same complex but on the 3rd floor (boy did we hate walking up those stairs!) with no trouble.
Looking forward to hearing back from you so I can try to make the changes you suggested.
Thanks,
Lisa

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

What is new in the iPod Touch 5?

Hello I was wondering what is going to be new in the iPod Touch 5? Thanks!

Apple has not yet made any announcement with regards to the 5G iPod Touch. It is against the erms of use of this forum to speculate on such things. Google if you want to see what others are speculating.

New to the game and need some quick help

I have been thrown our exisiting phone infrastructure and what do you know we are having some issues.
We have a new series of DID's and when they are dialed from our directory they go anywhere? Not routing to the proper extension. Translation pattern looks good in comparison to the extensions that are working.
Cisco Unified CM Administration System version: 6.1.3.3000-1
Cisco Application Administration - 5.0(2)_Build064
Package: Unified CCX Enhanced
Regards,
Dan

First thing to know is that everything that has a DN can be used for routing, so it's a good idea to look at the route plan report to find matches.
If you can't find an exact match, chances are you're hitting something with wildcards ie X, [1-2], etc
An easy way to check routing if you're new to the game is to use DNA
Cisco Unified Communications Manager Dialed Number Analyzer Guide, Release 6.1(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dna/6_1_1/bw-dna.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

New to the community

hello, I'm new to the forum and I would like to post an issue however I don't seem to find how to do it! Could anybody help? Thanks!

Welcome to the community.
This link should help.
http://community.bt.com/t5/Forum-Guidance-Ideas/How-to-An-archive-of-sticky-posts-on-how-to-use-the-...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

New to the game, expose help.

New to the mac game here, some mac experience otherwise though. Anyways so I've got my shiny macbok pro here and I want to expose my windows, I know I hit F9 to get that going, but it brings up the lighting for the backlit keyboard.... what do I do.

Welcome to the Apple discussions.
As louie points out, your MacBook Pro questions really should be posted in the MacBook Pro area at http://discussions.apple.com/category.jspa?categoryID=190

New to the SRM

Similar Messages

Maybe you are looking for