Newbie question: Question using BPEL as websevice

Hi
I have a few questions related to the usage of BPEL process and Web Services. The requirement is to build a BPEL Process, which can be configured to switch the web service call based on the customer requirement. Customer could either call our web service or third party web service to get the data. This BPEL process is called by a different application to display the data on their UI. So my questions are
1) Can we wrap this BPEL process as a webservice, so that the calling
application call this process as a web service.
2) Would it be possible for the customer to configure the process to switch the
call in the BPEL process. (default will be our webservice). Is there any examples available to do a prototype?
3) Based on the requirement, is it the right approach?
Any help on this is highly appreciated.

I got the answer for quesion 1 from Tutorial 7: Invoking BPEL Processes through SOAP or Java

Similar Messages

Siebel On Demand Outbound Webservice integration using bpel question

Hello everyone,
I have a question I am hoping the forum can help me out with
I am trying to do an integration using bpel with Siebel on demand as the begining point. The bussiness case is that I want qualified leads to be extracted out of the Siebel On Demand crm to be integrated into a back end system. This is put into a queue in the integration events. I have read the forum on all the session id and intermediate java code that provides the session id. I noticed that Siebel on demand is not a webservice requestor and only a webservice provider even for outbound messages. Since bpel always needs an input of some sort how would I kick off bpel to keep checking the queue not to mention getting the session id ect?
Any help would be great :)
Jaden

Hi ,
An integration even is something that is configured using a workflow. Like say when a Lead field is modified of r a particular Lead this even fires and will go and reside in Integration Even Queue.
A separate bpel process is then required to read the Integration Queue (wsdl's available) and then process this even for the lead.
Regarding extraction of Leads from SOD it need to have any Inegration events. Even without this we can do it. Just make a webcall using the Lead wsdl and then process th erecords usinga while Loop stucture. You can use a DB adapter to write to the target Database tables.
Nyjil

How to join the results from 2 webservices using BPEL?Architecture question

Hi,
I am new to BPEL. BPEL process calls two webservices, which return complex results. I need to process the results from 2 webservices using BPEL .The result will be a complex xml, join/merge of previous results.
What is the best practice to do it with BPEL?
I see three ways:
1.To do the processing (join/ merge) inside the BPEL process itself and return complex xml.
2.Develop auxiliary webservice in java. Auxiliary webservice will do the processing (join/merge). Call this webservice from BPEL process.
3.Do a plain concatenation of the two XMLs in BPEL and forward it to the frontend. Frontend then will do all the logic on its side
Thanks,
Boris

you could process the XMLs one at a time, and use XSL transformations to process the payload to a target schema.
Activity 1:
output from webservice1 -> transform 1 -> partial XML (of target schema)
Activity 2:
output from webservice2 -> transform 2 -> completed XML (of target schema)
Regards,
Shanmu.

Newbie script question... consecutive numbers with update.

complete newbie type question... this is also my first post. ( I am using CS3)
does anyone have a script which can make it so I can add numbers into the text consecutively.
for example, if this is my text "the big fat dog sat on the very wide mat, but was then displaced by a unfriendly cat."
and I wanted to place a number 1, number 2, 3, etc at points in the text so it read, "the big fat dog1 sat on the very wide mat2, but was then displaced by a unfriendly cat3." but later wanted to add another number and have later numbers update themselves, so the text then said, "the big fat dog1 sat on the very wide mat2, but was then displaced3 by a unfriendly cat.4".
by inserting the three, the previous three became four.
Has anyone got something which might be useful in this regard.
Many thanks
Steve

i wanted to avoid footnotes as they leave a bar at the bottom of each page.
i wanted a script to do something similar to footnotes but not much further.
does anyone have just a simple script that can do what I asked?
Steve

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

General place for newbie datamodeler questions?

With the production release of SQL Developer Data Modeler I'd assume that this forum will draw a bunch of new users. Is there a better place to ask some pretty simple, newbie like questions that won't bother the more seasoned members?
For instance, I am working in a Rails environment, which has some stringent naming conventions, one of which is that all of the primary key columns are numeric and called "id", with the foreign key linked columns called <table_name>_id. When engineering a logical model to a relational model, the added foreign key columns are all "id#". Is there a way I can define a naming rule to keep me from having to redo the relation column names?
Also, we have a standard set of columns (mostly Rails related) which appear in every table. Can I define a generation rule which automatically includes these tables?
Thanks

Thank you. I will try changing that setting.
IS there a setting which tells the relational model to automatically create pk and fk indexes? I haven't seen one, and manually setting them up is a tedious task. --sw

Question about using new battery in old Powerbook

I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
Current bad Battery Information below:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1144
Remaining Capacity (mAh): 1115
Amperage (mA): 0
Voltage (mV): 12387
Cycle Count: 281
thanks folks, Shereen

Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
Message was edited by: eww

Question about using TVARV in an ABAP program

Hello gurus, Im sorry about the silly question.
I have a question about using TVARV in an ABAP program.
A program is presenting a problem and I think that in this code:
SELECT SIGN OPTI LOW HIGH
FROM TVARV
INTO TABLE R_1_163431035_VELOCIDADE
WHERE NAME = '1_163431035_VELOCIDADE'
AND    TYPE = 'S'.
IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
      ZOPERADORAS-OPERADORA = 'ABCD' AND
      ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
ELSE.
ENDIF.
What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
I am new to ABAP programming, but I have a lot of XP in other programming languages and this makes no sense to me.
Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
If this is a bad way to program, what would be the best way?
Regards
Ronaldo.

Hi Ronaldo,
But in this case, the range is not empty, there are 17 records, in this way.:
For the column "SING" all values are "E"
It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
Not silly ;-). Yes they work differently.
More info here:
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
BR
Sandra

Question about using Macbook in Vietnam.

I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

You may need a plug adaptor, but you don't need a power converter.
(43828)

I have a question about using adobe CS files in CS6 edition

I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

donrulz,
Are your Edit>Color Settings the same?
Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

Where Would be the best category to ask a question about using dashboard?

Where Would be the best category to ask a question about using dashboard?

However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

Hello everyone I have a question I use my Apple ID for iMessage but I want to know if I can use my friends Apple ID just for the App Store, can I do that ????

Hello everyone I have a question I use my Apple ID for iMessage but I want to know if I can use my friends Apple ID just for the App Store, can I do that ????

First on a computer try editing your ID to change the payment method to None.
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
If problems see:
Why can’t I select None when I edit my payment information?
Last:
Create a NEW account using these instructions. You have to use an email address not used with Apple before.
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Question about Using PAPI Web Service in PowerBuilder 9

Hi, all.
I Have a simple question about using papiws in power builder 9.
In pb9, I created a new Web Service Proxy Wizard and I input a url for papiws(ex. http://seraphpernote:7001/papiws/PapiWebService) and click next.
But I couldn't get any Service List.
In Eclipse, I used this url for using papiws well.
Does anybody know about this case??
help me plz.

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

HT5312 forgot my security questions, how do i reset answers to these questions by using the rescue email?

forgot my security questions, how do i reset answers to these questions by using the resuce email?

If you have a link to send the answers there, use it, wait a few hours, and check the address's spam filter.
If you can't get it reset that way, go back to the article you asked this question from and use the link to contact the iTunes Store staff in the 'Additional Information' section. Ifn this case, you can't reset the questions yourself, and nobody on these boards can reset them for you.
(92571)

Newbie question: Question using BPEL as websevice

Similar Messages

Maybe you are looking for