Newbie question - uploading to Smugmug from PSE 7

Pardon me if this was already answered, a simple question. Recently installed PSE 7 on Win XP and created an album from a recent vacation trip. I would like to upload the album to my Smugmug gallery. I don't see options for Smugmug/Flickr/... in the 'More Options' menu within 'Share'. I have set my location to 'USA & Canada', it says all services are up to date, but I see none of these online photo sharing services. Any help will be appreciated.
A frustrated newbie.

Thank you John, McPap, and Barbara for sharing your suggestions. I based my decision to go with SmugMug for hosting my photos because users in several discussion forums indicated support for uploading pictures to SmugMug from tools like PSE, F-Spot, etc. Anyway, back to the issue I wrote about: I followed up with Adobe support and tried the following procedures, all in vain ending up with the conclusion that the downloaded software that I have installed may have been corrupted resulting in the online services access not working. So they are going to ship me the software on a CD (free of charge as I had already paid for the software) and will give that a try. Here are the options that the support technicians (I had to call a couple of times) recommended me do:
1. Delete c:\Documents and Settings\<USER>\Application Data\Adobe\PhotoShop Elements\7.0\Organizer\OLS - to download online services information again and replace any corrupted information - did not work.
2. Create a new user account with Administrator privileges, logout, and log back in as the new user and start PSE to download online services information for the new user - also did not work
3. Uninstall PSE, reboot, re-install while logged in as an Admin user, and restart PSE - also did not work
Finally, the 2nd support technician I worked with concluded that the downloaded software was the common element that could have been corrupted and causing this issue. I should be getting PSE 7 on a CD next week. I will update this post with any progress I make and hopefully this will help others if they are facing the same issue.
Regarding McPap's comment about being in the UK and access to SmugMug, the support technician did ask me at one point to verify my location choice, as non-US locations do not have access to the full list of online services which includes SmugMug. I do not understand the reasoning for this, but that is the way PSE works.
Regards,
Nathan Suri

Similar Messages

Upload to Flickr from PSE 10.

I have Photoshop Elements 10. I have been unable to upload any photos from organizer to flickr. A popup appears saying something like "preparing files to upload" but then just goes on and on. Tried repeatedly over many weeks with 8 photos, always with the same results. On one occasion, I left the computer running for several hours, just to see if the photos were in fact uploading but just took a while. Still nothing. My internet was connected and working fine. Any suggestions?

Your problem is with iPhoto for iOS. This is the iPhoto for Mac forum. You need to go to the other forum.
Regards
TD

Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

Hello there,
we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
Any info is GREATLY appreciated. Thank you.
Edited by: cisGuy on Sep 20, 2010 5:31 PM

i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

Newbie question: Select one row from table in PL/SQL

Hi,
I want to select one row from the table Employee where Emplyoyee Number is say 200. This is a simple SQL query, but I don't know the equivalent PL/SQL format. I will have 3 out params here - Id itself, Name, Salary. I will then have to populate a java resultset object from these out params.
Later, I'll have to use cursors to retrieve more than one row.
Thanks for any help.

Perhaps something like
CREATE OR REPLACE PROCEDURE get_employee( l_id IN OUT employee.id%TYPE,
                                          l_name OUT employee.name%TYPE,
                                          l_salary OUT employee.salary%TYPE )
AS
BEGIN
SELECT name, salary
    INTO l_name, l_salary
    FROM employee
   WHERE id = l_id;
END;Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Newbie question about extracting data from events

HI
i am sure there is a simple solution to this, but I am getting frsutrated trying to extract useful data from an event:
I have set up and event listner, whatching for CHANGE on a HorizontalList
so far so good, event handler called when a list item is clicked, and the event is passed, but what is the syntax for getting the in particular the columnIndex, which can tantalising be seen as part of the event in debug.
    public function ShowGroupTab(event:Event):void{
            var a:Number =event.target.columnIndex;
causes this runtime error:
ReferenceError: Error #1069: Property columnIndex not found on mx.controls.HorizontalList and there is no default value.

First it would be better to cast your event in the proper class. In this case the event is a ListEvent. ListEvent extends Event so your code will work but be harder to maintain.
Your problem is that you're trying to access the columnIndex property on the event.target instead of the event itself. The event.target is the component on which the action was performed, here it's a HorizontalList, and the list does not have a columnIndex property.
Try this :
public function showGroupTab(event:ListEvent):void{
     var a:int= event.columnIndex;

Mac newbie question about transferring files FROM iPod

I got an iPod 30G for xmas. I downloaded all my music from my computer to it. Then my hard drive crashed. But it doesn't seem like I can put the music back onto my new harddrive because it's some kind of "tunes" file instead of a data file. Admittedly, I don't know much about this stuff. But can someone tell me if it's possible to put the music back onto my computer from my iPod?
Thanks
Mac OS X (10.4.3) Ipod 30G

Ollie's iPod Extractor

Newbie question - Changing domain name from .local

Hi, I'm trying to change my domain name from dns.local to dns.domain.edu. Can someone help me with this. The server was already set up and some places it has:
dns.local and other places is has dns.domain.edu. when i type in dns.domain.edu into a browser it works. when i type in dns.local i get an error.

Leave the .local alone. That is your Bonjour access name.
Bonjour is also known as ZeroConf in the Unix world, and is how your Mac discovers other Macs, Mac file servers, and Mac print servers on your local network (also know as a subnet).
You can add search domains via
System Preferences -> Network -> Advanced -> DNS -> Search Domains -> [+]
A search domain is where you can enter 'fred' and the name lookup will look for fred.local, fred.domain.edu assuming both .local and .domain.edu are provied as search domains.
As to other people finding your via dns.domain.edu, that is up to the domain.edu name servers, and their administrators. Your Mac does not establish that, unless they have a dynamic DNS updating service.
To have a DNS name in a domain, your DNS name must be registered with the domain server that owns that domain name. That is not automatic.
In this case if you have not already been assigned dns.domain.edu by the domain name and fixed IP address by the owners of domain.edu, then you cannot just take the name dns.domain.edu. If you have been assigned the name dns.domain.edu and a fixed IP address, then you would set that up in System Preferences -> Network -> Advanced -> TCP/IP
At best, if domain.edu allows the DHCP servers on campus to both assign an IP address and also create a dynamic DNS name in domain.edu, then you might get a name like
college-name-192-168-27-232-subnet-12-dorm-name.domain.edu
A very creative and memorable name
If you cannot get the domain.edu administrators to give you dns.domain.edu as an addressable name, you can go ahead and get a dynamic DNS name from a service such as No-IP.com or DynDNS.org (free ones are available), and just run one of their dynamic DNS updating utilities on your Mac so that when your DHCP IP address changes, your dynamic DNS name is updated with the new IP address as well.
A dynamic DNS name service such as the 2 I just mentioned, will give you a fixed name such as fred.dynamicDNSnameService.net that will not change, and when you run an updating utility on your Mac, the dynamic DNS service will keep the fred.dynamicDNSnameService.net updated with the every changing DHCP assigned IP address.

TS4124 Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.

Hi, do you know how can I upload inelegible songs from itunes to Icloud. They are songs added from original CDs. Another question would be how can I transfer all the music I have in my Ipod Classic to my Itunes or ICloud as I want to back it up.

Depends on why it's ineligible. If it's under 96 Kpbs, try right-clicking on the file and choosing Create AAC Version. (If you don't see this option, go to iTunes>Preferences, click "Import Settings..." then choose "Import Using: AAC Encoder" and "Setting: iTunes Plus".) Then rescan your library to see if this version will add to iTunes Match. Or, after changing your import setting, just re-import the song to your iTunes library.
If the song is over 200 MB you would have to reduce it's size to make it eligible.

Total Newbie Question ... Sorry :-(

I know it's a windows thing, and I am now converted to Mac but I gotta know this because it's doing my head in. It's a complete stupid green gilled newbie question.
When installing new programs on a Mac can you create shortcuts to the programs on the Dock? I did what I THOUGHT it would be, i.e I made an Alias and stuck it in the dock, but on rebooting my Mac later on, in place of the shortcuts where 3 question marks which when clicked on did absolutely nothing???
Help?
A.L.I
Windows XP Pro Desktop, Macbook Pro, 60GB iPod Video Mac OS X (10.4.5) OS X

You aren't installing something from a dmg file are you? The dmg is a disk image – kind of a virtual CD. So when you double click the dmg and then get the little disk/hardrive/custom icon on your desktop that is the same as if you had mounted a CD. You then need to drag the application off of that "CD" into your application folder. Then it is truly installed.
You can then "eject" the icon your your desktop. This is what happens when you shutdown and without remounting the image your dock shortcut can't find the original.
Just a thought.

When on a job web site and you have to upload your resume apple needs to come up with a update so you can do so. When I try to upload my resume from my adobe reader or iBooks it keeps on going to photos and won't upload from the adobe or iBooks.

Please come up with an update that will allow people to upload their resume from iBooks or Adobe reader to the website of there choosing using safari. It only gives you the option to upload a photo a take a photo. The iPad or any tablet is going to take over as far as computers are concerned because it's easy to Cary with you and people like the fact of something a lot smaller to carry around then the laptop. Please help need this done like yesterday. Other then that all the apple products I have, has always been the best and they will outwork any windows based or android. You get what you pay for and apple is top dollar.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

Convert catalog from PSE 6 to 10, is it necessary to include the jpegs?

Hello
I am testing PSE 10 (from PSE 6) and have copied the catalog to a test XP box (but not the jpegs). The catalog refuses to convert with an unspecic error: "Catalog conversion failed" see "Catalog Conversion Errors" for more details.
PSE 6 can find no problems with the existing catalog and I have worked trhough eg http://kb2.adobe.com/cps/515/cpsid_51525.html .
If the conversion process requires the jpegs etc. then that will certainly cause a problem, they are not visible to this PC! On the other hand, if it is simply a matter of converting the catalog without reference to the source files then there should be no problem.
I am reluctant to allow a conversion process to break a very considerable investment in effort in the PSE6 catalog and want to see it work (and have useful benefit to me) before committing the original.
Some rough statistics: 45,000 images, 140GB data, catalog is around 1.5GB. It takes about 3 mins for 'repair' to run (having forced a 'repair anyway') and under 10 mins for 'optimize'.
I should add that I have run the psedbtool and while it finds that two drives are missing (E: and F:), there are no missing files. E: and F: are USB backup drives and are not connected, nor would I expect them to be. All photos are in one (top level that is) folder on one drive. If the convertor can only run when the backup drives are connected, that seems a little odd.
If the only option is to restore the backed up PSE 6 archive into PSE 10, that is do-able, but I was trying to avoid doing that.
Perhaps the more pertinant question is "what does PSE 10 offer that I haven't got in PSE 6?". So far I have not found any really useful function, maybe a couple of the irritating bugs have been fixed? (Mostly the date orderby bug) I have lived with the multi-core hang since PSE 6 came out and don't use PSE to catalog my raw files, so that fix has no benefit to me.

Well after an all day effort, I have a working W7 64 bit with a spare 1TB drive and all the updates done (about a 2GB download). That has taken about eight hours. Then recover the PSE 6 created backup files into PSE 10, (took about three hours) and for good measure forced a repair and optimize on the catalog. No errors at any point.
PSE 10 crashes when in slide show view. Sometimes it gets through about two images, sometimes 100 or so, but always it crashes. So I am ready to give up, PSE 6 is stable at least (though I have yet to try PSE 6 under W7 64bit, my standard PC is W XP 32 bit).
One possible benefit of W7 is the color fidelity is better (I have color calibration too). The management of the twin screen is not better though, PSE keeps vanishing from view (this is not related to the crash) and has to be coaxed back onto the secondary screen. PSE 6 under XP gets this right.
I checked the arm chair arm image again, it is the wooden arm of a director's portable chair seen from the side, no matter how I try I can't see a face in it. I realise now that the 'obvious' faces that get missed are when the eyes are not horizontal, even a small turning of the head results in the face being missed.

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

Deleting a photo from PSE 8 and Nikon ViewNX 2 at same time?

My PSE 8 has the Nikon program as the supplementary editing program, and the Nikon program has PSE 8 as the open with program. I made sure that the settings were made. When I delete a photo in PSE 8, why isn't the same photo automatically deleted from Nikon ViewNX 2 and the reverse when working in the Nikon program which isn't often that I do? The same question could also be applied to Windows Live Photo Gallery which I don't like to use, but photos keep accumulating as in the Nikon program. PSE 8 is my main program for editing, but would like to learn NX 2. My PSE 8 is kept clear of unwanted photos. Is there a control that I am missing, or am I asking too much to be able to keep unwanted photos off my computer? I know I may have to do it manually, but hope that there is an easy solution. By the way, deleting from NX doesn't automatically delete the same photo from PSE 8 either.

You are right about that. I loaded ViewNX 2 to help solve another problem which it did. The problem is solved so I will delete NX 2. I couldn't understand when I got Windows 7 why there were people who wanted to know how to unstall Live Photo Gallery. Well, now that I have PSE 8 I know why. Of course, PSE 8 does more and Photo Gallery fights PSE 8. From what I read, getting rid of Photo Gallery couln't be done by simply doing the "unstall". It sounded so complicated. Will check it out again, but better to deal with two programs than three. Thanks again.

Automatic upload of roles from ECC to portal (UME with LDAP)

Hi experts,
This thread reopen the question asked on the following message : automatic upload of roles from BI to portal
However, it concerns this time "UME with LDAP".
Problematic :
SAP Library 04s tells us that is not yet possible to automate role replication (or role assigment replication) from ABAP Based back-end to Netweaver Portal. Only manual process for initial upload is possible.
Source = http://help.sap.com/saphelp_nw04s/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm
Questions :
1 - Did anyone ever try to implement such an automatic tool ?
2 - What if I'm not able to write on the Active Directory ? I am still able, at least, to automate role assignment replication from ABAP Based back-end to Netweaver Portal (ie. UME with LDAP) ? Directly from SAP R/3 to EP through UME, without passing through Active Directory since the group field is not maintained in AD.
Many thanks for your inputs
Alexis MARTIN

Hello,
As I did not read the previous thread I don't know what exactly you are trying to achieve, but I can tell you about what we have done - as far as it is not too late yet.
We use the portal with integration to a BI system. In the ABAP stack we have lots of roles with menu items for hundreds of reports. We want the users to see these roles in the portal.
First we have used the role migration tool of the portal to upload these roles. There is a Java API for executing role uploads from code. You need to create a webservice in the java stack to call this api, and can call the webservice from ABAP.
However it is just a question of time and role size until this will not work at all. Standard role migration is more or less crap, stability is a problem. It also creates a lot of logs in the PCD and thus fills the database with trash. (After a few OSS messages there is now a program for deleting logs + you can turn of logging.) Also upload of larger roles takes up to an hour, and you alwasy have the problem that your portal roles are not up to date during the day.
When I got completely fed up, I have implemented an own navigation connector. When you log on to the portal it will connect to the ABAP stack via RFC, load the role, and generate the portal menu from it. It uses caching, but on every logon it checks whether the role has been updated in ABAP since the last time it was loaded. It is up to date, faster then PCD navigation, and you need absoluetely no periodical synching at all. I cant even understand why this is not offered by SAP per standard!
Drawback is that it will of course only work for the menu items, and only menu items with an "URL-type" are supported. I'm prettry sure however that it would be possible to implement a few other types as well.
Let me know if you are interested in the solution, I can give you a few additional details: oliverDOTsvisztATwienerbergerDOTcom
Oliver

Newbie question - uploading to Smugmug from PSE 7

Similar Messages

Maybe you are looking for