NINO is not appearing in the P35 Report

Hi,
The NI number is not showing in the list when we run the P35 wroksheet yearend report. As per my observation, the SAP program is not populating NI number for output. But, my payroll manager is telling that they used to get in the last year. Can anybody help me is there any legal changes affected this NI.
Transaction code : PC00_M08_CEOY - End-of-Year Reports (P14/P35/P60/MagMedia)
Thanks,
Purandhar P

Hi,
The problem is resolved, user was looking at wrong place. Actually in SAP standard program the output strcuture for P35 worksheet does not have NI field. This filed is only avaialble for P60 and other formats except P35 and P35 worksheet.
Thanks,
Purandhar P

Similar Messages

Postings on profit center but does not appear in the profit center report

Hi all!
I have a very strange problem. My customer is using cost of sales accounting. When I reconcile the cost of sales accounting profit and loss report with a profit center or cost center report I found that for a certain month there is a few descrepancies. I found that for a certain functional area I had postings on a specific account (account 451240 loss price differences) on functional area and both on cost center and profit center but these postings does not appear in the profit center or cost center reports. When I look at the postings in fbl3n or fs10n I can see that they are assigned to both cost centers and profit centers. How is this possible? How can a posting be made to a cost center or profit center but not appear in the corresponding reports?
Many thanks for help in advance,
Åsa

Problem solved

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Generating a document that will not show on the tax report

Good Morning,
I have an interesting situation involving the Tax report and the GL. My client had a AR down payment invoice that was entered in error and they made a credit note to cancel it and re enter the invoice correctly. Now when you look at the BP balance everything is correct however when you look at the tax report their is an extra credit because the Credit Note appears but the AR down payment invoice does not.
Ultimately my questions are how do I make an entry to correct the tax report and for the future how do I correct a down payment document without hosing the Tax report?
Thank you for your consideration,
John-Michael

Hi John-Michael,
when you create a DT invoice with the appropriate tax code, this document will appear in the tax report. When using the copy-to functionality in the DT invoice to create the credit memo, it will draw all data including the tax to that document. In the tax report these 2 transactions then cancel each other out.
To correct the entry in your db I would hence recommend to reverse the credit memo with an appropriate invoice & then use the DT invoice as base document for the correct CM.
All the best,
Kerstin

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

Details not appearing in the dropdown list in the filter window

Dear All,
   I have come accross a unique problem. I have made a user defined query. Now there is an item code column. I want to filter the item codes in the generated query. But all the items are not appearing in the filter window> item field> dropdown. My query output shows all the items but the filter does not!!!
   I have 10,000 items where the codes are ranged from A to X with various serials. When I run the query the report shows all the items which are within the query conditions. But when I open the filter window then in the dropdown for the item code only codes upto "G" appear.
   How can this be resolved?? otherwise I am not able to filter my selections.
Regards,
Raja

hi suda,
The query is to generate a report to find out the total units of items sold through delivery. Actually, there is no problem with the query. The query shows absolute reports. The problem is among these 10,000 items which come in the report, if I need to see some specific item then I can use the filter option. But in the filter option the items codes upto "G" are only appearing inspite of the fact that the query report list has all the items from A-J.
I hope I am clear. This is not the problem with this query only. In all the queries where the item details are appearing, the system doesnot give me the flexibility to filter by all the items rather only upto a range. Why is it so?
Still if you need to see the query then please let me know. I will put in the query statement.
Regards,
Raj

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

Button Save layout not appearing in the Applicaion toolbar

I am displaying an ALV output thru OOPS like
my_salv_table->set_screen_status(
    pfstatus      = l_pfstatus
    report        = my_repid
    set_functions = my_salv_table->c_functions_all ).
I have set my pfstatus prior to this . In my PF status I have set the save layout button also . But it is not appearing in the ALV output . But when I execute the pfstatus individually the button is appearign in the application tolbar .
Moreover I tried to explicitly set the save layout button
l_functions_list = MY_SALV_TABLE->GET_FUNCTIONS( ).
l_functions_list->set_save_layout( IF_SALV_C_BOOL_SAP=>TRUE ).
But also it is not appearing in the ALV layout

Hi you can copy the status from the standard ALV program 'SAPLSALV' to your program.For that u nedd to follow thease steps.
1. go to se41.
2. enter standard program name 'SAPLSALV'.
3. select the status name 'STANDARD' via F4 help.
4. Click on the copy 'status' button on the application tool bar.
5. enter your program name and give the name of status as zstandard.
status will get copied.
6. Now in your source code.
in the   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
do changes as.
I_CALLBACK_PF_STATUS_SET = 'ZSTANDARD'.
and write subroutin as.
*&      Form ZSTANDARD
      text
     -->EX_ITAB    text
FORM ZSTANDARD USING RS_EXTAB TYPE SLIS_T_EXTAB .
copy the status of 'SAPLSALV' standard program.
DATA:
    GT_EXCLUDE   TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ZSTANDARD' .                       "Set gui status
APPEND '&FIND' TO GT_EXCLUDE.
ENDFORM.                    "ZSTANDARD
after doing all thease thing u will get all the functionality of standard alv program including SAVE command.
I hope it will definately help u.
Rewards if usefull.
Best Regards.
Dheeraj

KB05382: Messages sent from Microsoft Entourage do not appear on the BlackBerry smartphone

KB05382: Messages sent from Microsoft Entourage do not appear on the BlackBerry smartphone
Resolution: This is a previously reported issue that has been escalated internally to our development team. No resolution time frame is currently available.
This has been a reported problem for years...resolution has always been the same...assume because they are not actively looking for a fix...anyone know of an ETA on a resolution or any workaround?

Not that I am aware of.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Why local file destype does not appear in the parameter form ?

Hi,
There is a Destype option Local File but it does not appear in the list for Destype in the Parameter form.Why?
Even file is not working & the reports server is getting hanged if i specify the destype as file & a valid file name & format is given.
Print option from the app server is also not working, i mean remote printing.
My App server machine can see my local printer, but when i give the print share name or literally five\\machine name..printername then too print option is not working.
Thanks
Mahesh

Hi Shaun,
I'am using 9iDS & the reports documentation says that Local File DesType Option is valid for rwclient & rwservlet.
When your specify in the command line option it works, no issues but in web reports where i get the parameter form Destype list does not contain Local File Option.
For web reports i use rwservlet.
i mean to say my url is something like this
http://oracle.guru:8888/reports/rwservlet?report=abc.rdf&userid=a/b@c&destype=cache&paramform=yes&server=myserver
one more peculiar thing, i have reported it on Metalink.
As you can see in the above URL i have given an argument of destype=cache, if i do not give this then my parameter for will not come up!!!, why should i give a destype for the parameter form to be displayed?
Ok coming to my current problem..
in 9iDS Reports is Local File supported? i.e. when i give a URL like above(My parameter form has system & user parameters including DesType,DesName & DesFormat).
coming to the file option in DesType.
In my parameter form if i select Destype as File & give a valid file name & a valid Desformat the report server hangs i mean there is no activity on the client & after this any report requests from any other clients is not responded by the Reports Server.
When i check in the performance monitor of my Reports Server the CPU Utilization will be constant at 100%
Thanks
Mahesh

Value not appearing in the workbook

Hi Friends,
There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
How to know/check from where this value is getting populated.
Thanks & Regards,
Shreesh.

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

OSX Mountain Lion: Running app icons do not appear in the dock

It's almost 2-3 days that I have found when I run an application in OS X Mountain Lion, the application icon does not appear in the dock. In other words, the icons in the dock remain unchanged and no other running application icon appear in the dock. Does anyone else have the same issue?
I appreciate your time to answer my question.

Since you're having issues in multiple accounts I suggest you repair the HD and re-install the OS. ML makes the process pretty painless.
Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First choose DIsk Utility and run Repair Disk. If you find errors run it until all errors are fixed or it reports "Disk cannot be repaired".
Then, choose Reinstall OS X. This will be an install in place and won't affect any of your own data.

Service entry sheet release flag is not appearing in the change mode.

Hi,
In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is exsists in the header level.
note:
1.No changes done release setting, classes, or any other parameter.
2.Last day Few service entry sheets have been released by user .
3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
wht could be reasons?
Please provide suitable solution.
regards,
kumar.

Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
Hope this helps.
Ganesh

Quantity is not appearing on Cost Center report S_ALR_87013611

Hi Fellows,
Quantity is not appearing on cost center report S_ALR_87013611. When we go to the line items it is appearing. Could you please help me in this regard.

Hi,
Please refer note 64120
regards
Waman

Have a 10.6.8 mac and the icloud icon does not appear on the system preferences

Hello,
I have a 10.6.8 mac and the icloud icon does not appear on the system preference, even if I'ved upgraded the software.
Renee

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

NINO is not appearing in the P35 Report

Similar Messages

Maybe you are looking for