No accessory view in custom table view cells.

Hello Everyone,
I have been having problems with my accessory views in my custom cell views. I am expecting that the accessory views will show up by only setting the accessoryType property correctly. Below is a link to my class for the custom cell view. I am setting the accessoryView to UITableViewCellAccessoryDetailDisclosureButton.
I didn't know how to paste code in here, so I have pasted my code here: http://pastebin.com/m3ba5d9de
Thanks again,
Uday

Hi
View is always a better option..using a view you can avoid the naming convention problems associated with fields or Table names.
Thanks
-Rajesh

Similar Messages

Custom Table View

Hi,
I want to provide more than three component in the table view.
Two images/Icons (Left Side), Text with Subtitle, Text (Date and Time at right-hand side)and Detail Disclosure button.
How can i create this with the custom table view?

This is an end-user forum. You need
http://devforums.apple.com

Maintenance View for custom table with foreign key relationship

Hi Folks,
I have created a custom table with foreign key relationship with other check tables. I want to create a maintenance view / tablemaintenance generator. What all things I need to take care for the foreign keys related fields while creating the maintenance view / tablemaintenance generator.
Regards,
santosh

Hi,
You do not have to do anything explicitely for the foreign key relationships in the table maintainance generator.
Create the table maintainance generator via SE11 and it will take care of all teh foreign key checks by itself.
Regards,
Ankur Parab

How to find T-CODES for maintenance view of custom tables?

Hi,
I have a list of custom tables for which maintenance view is generated. Also, many of them might have a T-Codes assigned to them.
I need to know how to find out these T-codes?
Is there some table which maintains these or a function module which can give the t-code name?
Help will be appreciated.
Thanks.
Shreyas

Hi shreyas,
1. one way is
2. goto se93
3. Press Ctrl F
4. Expand the search criteria (from button on toolbar)
5. In program name enter SAPMSVMA (This program is for sm30)
6. In transaction code enter Z* or Y*
regards,
amit m.

Insert form view data into table view

Hi Experts,
I have
--> a form view with three input fields and a button(ADD)
--> a table view with three columns.
Both views in same page.
My requirement is when a user enters the three inputs and click button (ADD) all the inputs entered should be inserted in the below table view.
User can be able to enter multiple lines by clicking ADD again and again with different inputs.
How to insert rows from a form view event (ADD) into table view?
Thanks&Regards,
karthik

Hi
Which 'System Action' are you using in the 'Add' button? You need to use 'Insert Row' Action. When you select this below the action you will get one box 'Apply To' there you select the table. Then save & deploy the model, you will get what you want.
Caution - THis data will not get stored in the table permenently, once you close this model you will loose all the data.
Regards
Sandeep

Table View in View-based Application

Hi.
I want to use an UITableView in a View-based Application.
All examples I found are for Navigation-based Applications.
I Found only one example for View-based Applications, but it create all components himself without the Interface-Builder.
I search an example with Interface-Builder.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.

GrinderFX wrote:
I want to use an UITableView in a View-based Application.
Hi, and welcome to the Dev Forum!
Firstly, I would point out that you don't need to use UITableViewController to control a table view. The table view controller is just more convenient. So for example, you could simply drag a table view from the library in IB and drop it onto your view. Then you could hook up the table view's dataSource and delegate outlets to the File's Owner. Then you would add the data source and delegate protocols to the @interface of your UIViewController subclass and add the required data source and delegate methods to the @implementation.
I mention the above because building your table view that way is very instructive. If you want to learn more about table views in general I would recommend Chapter 8 of +Beginning iPhone Development: Exploring the iPhone SDK by Mark and LaMarche+, which includes 3 table view projects that don't involve a navigation controller.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.
Returning to your specific question, IB allows you to change the class of an object. Here are the steps to use the View-Based Application template as you described (In the following I'm using Grinder as the name of the project; e.g. the app delegate class is named GrinderAppDelegate, and the view controller subclass is named GrinderViewController):
1) _Change parent of view controller subclass in your code_
In GrinderViewController.h, you only need to change the superclass from UIViewController to UITableViewController:
@interface GrinderViewController : UITableViewController {
However it will be easier later on if you make new files from the UITableViewController file template:
a) Ctrl-click on GVC.h and GVC.m in the Groups & Files tree; select Delete->Also Move to Trash;
b) Ctrl-click on Classes; select Add->New File->iPhone OS->Cocoa Touch Classes;
c) Select UITableViewController subclass from the right center panel and click Next;
d) File Name: GrinderViewController.m; check Also create GrinderViewController.h;
e) Make sure the name for these new files is exactly the same as the ones you deleted; if you make a mistake here, delete the new files and start over, because that name must be the same in several other files;
f) Click Finish; the replacement files should now appear under Classes.
2) _Change the view controller class in IB_
a) Double click on MainWindow.xib under Resources in the Groups & Files tree;
b) Make sure the MainWindow.xib window is open by selecting Window->Document from the IB menu;
c) Locate the View Mode switch, upper-left, in the xib window, and select the Center position;
d) The xib window should now be displaying two columns with small icons on the left;
e) Select the Grinder View Controller icon;
f) Select Edit-Delete to delete that icon;
g) Select Tools->Library from the menu, and expand Controllers in the Library Panel;
h) Drag a Table View Controller to the xib window and drop it right under the app delegate icon;
i) Select Tools->Identity Inspector from the menu to open the Grinder View Controller Identity Panel (the new Table View Controller should still be selected in the xib window);
j) Under Class Identity, select Grinder View Controller from the list; tab out of the Class field to be sure the selection is recorded;
k) Ctrl-Click on Grinder App Delegate and connect the view controller outlet (ctrl-drag) to Grinder View Controller;
l) Expand GVC in the xib window and delete the Table View icon (since we want it in the other xib file);
m) Reselect the GVC icon and open the Grinder View Controller Attributes panel;
n) Under View Controller, select GrinderViewController from the NIB Name list;
o) In the Table View Controller IB Editor window, select GrinderViewController.nib to open the other xib file;
p) Make sure the GrinderViewController.xib window is open in small icon mode as in steps b-d above;
q) The class of the File's Owner should be GrinderViewController;
r) Delete the View icon;
s) Drag a Table View from the Library to where the View icon was;
t) Ctrl-click on File's Owner and connect (ctrl-drag) it's view outlet to the Table View;
u) Ctrl-click on Table View: connect both the dataSource and delegate outlets to File's Owner;
v) File->Save both xib files.
3) _Make some rows in the table view and test_
a) Open GrinderViewController.m in Xcode;
b) Add the commented lines (be sure to use the correct line for your target OS);
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
return 20; // <-- change to more than zero
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease];
// Configure the cell
// add this line for OS 2.x
cell.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
// add this line for OS 3.0
// cell.textLabel.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
return cell;
c) Build and Go.
I should add that the procedure might be a little easier if you start with the Window-Based Application Template. But the above is good practice in editing xib files.
Hope that's helpful!
- Ray

Creating a pivot table view with two levels of headers

Hi,
I have a requirement in which i need to have a common heading for two or more columns.
For Example, I have two columns like total number of loans and Total loan amount. As per my requirement, i need to give a common header 'Total loan' as the main header and amount and Count as two subheaders under the main heading in the pivot table.
In table view, i would be able to make it using the display column and table header property. But, i need to get the same in pivot table as we have to use pivot table view instead of table view.
Please Help me on this issue.
Thanks in Advance
Deepak

Hello,
create one column in criteria and change it's fx to case when 1=0 then Products."Prod Name" else 'Tota Loanl' end
Now go to pivot and drag this column to Columns block of pivot. But keep this column up of Measure Labels and Now, go to column Format values.
Mention cell horizontal alignment to Center
see the following screenshot, Header is the column i created with the above functionality.
!http://i852.photobucket.com/albums/ab83/kishorg86/Header.jpg!

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Save functinality for a zcomponent (table view)

Hi ,
I have created a zcomponent with a table view in it.
i have include the zcomponent(table view) in BP page.
Now when i press on save button of BP page ,i need to save the data entered in the custom table view.
so i need to redefine the save evenet (which is there in bp_head).
How could i access the conents of table view in bp_head?
thanks,

The ideal code should look like this .. where BUILHEADER is the context node in the component controller
and PARTNER is the context node in the custom component. Remember that the context node name in '' should match the exact name as it is declared in the method create_++++++ method. check in debugging if binding works.
e.g.
lr_model = owner->create_model( class_name = 'CL_BT112H_S_BSPWDCOMPONEN_CN01'
                                  model_id   = 'BTAdminH' ). "#EC NOTEXT
wd_usage code should be like this.
CHECK iv_usage IS BOUND.
CASE iv_usage->usage_name.
    WHEN 'CU_ZBTV2'.
      iv_usage->bind_context_node( iv_controller_type = cl_bsp_wd_controller=>co_type_component
                                   iv_target_node_name = 'BUILHEADER' "
                                   iv_node_2_bind      = 'PARTNER' ).
    WHEN OTHERS.
      CALL METHOD super->wd_usage_initialize
        EXPORTING
          iv_usage = iv_usage.
ENDCASE.
if binding is success. go the save method
access the component controller code like this
data: lv_comp_controller type ref to CL_BSP_WD_COMPONENT_CONTROLLER." u might have to change this to refer to the zclass of the comp controller.
lv_comp_controller ?= me->COMP_CONTROLLER.
then access the partner context node of the comp controller like below
lcl_ent ?= lv_comp_controller->typed_context->partner->collection_wrapper->get_current( ).

Two table views in single screen

Hi,
are we able to put two Table views in one UI window?
My requirement is if i click on one cell on 1st table view then 2nd table view cell's in the same UI window has to be updated with required values.
is that possible?
Please let me know the solution if anyone know.
Thanks in advance.

Just go to interface builder and drop two table views in.
Presto! You're done.

Registering db objects (tables , views , e.t.c)

Hi,
Having connected with a Developer Responsibility , i see a submenu of "Database" which contains the menu entries "Tables" , "Views" , "Sequences"...
When these functions are used....????In order to define/register custom tables,views,sequences with the Application Object Libraries....???
If yes , is it required to ...and under which circumstances...???
Somebody developed some custom form modules/reports using custom db objects which have not been registered...!!!
Note: I use EBS 11.5.10.2
Thanks , a lot
Sim

Registration is not necessary in order for your custom developments to work. However, if You are planning on using certain standard functionality (i.e. flexfields, attachments) on your custom objects, you'll need to register some of the information.

Data transfer between 2 table views

Dear Gurus
Here is my scenario.
I need to transfer data between 2 table views (Both these table views are having only column). These 2 tables are present in separate views (under same viewset).
Now initially I need to display some data in one of the tables when I display the screen for the first time (this I was able to achieve). Now if I double-click on any row of this table, I need to move the data present in that particular row to a different table present in the same screen.
Here is what I have achieved.
1) When I click on any row, I was able to capture the row index and the corresponding data in that row.
I put some code in the method EH_ONSELECT (present in the event handler) to get this working.
Now my question is
How can I move this captured data into a different table view?
I tried investigating on some of the methods such as do_prepare_output. But I am left with no clue on what coding needs to be done here.
Any help will be greatly appreciated.
Thanks
Raj

Hi Raj,
You can write the code in methods like DO_PREPARE_OUTPUT, but need to take adequate care of perfrormance as this method gets triggered for all server events.
If you can identify any other method on the second view at an instance when you select rows on view1..
that too is fine.
You can get the selected entries from a context node collection wrapper method...
DATA: lr_marked_line TYPE REF TO if_bol_bo_col.
* Get the lines selected by the user
lr_marked_line = me->typed_context->productcategory->collection_wrapper->get_marked( ).
You can do a work around this way too...create an internal table attribute in the IMPL class of Custom Controller...Update it with the selceted rows in view1.
Populate view2 with the values in this table by accessing them from Custom Controller.
Code can be in DO_PREPARE_OUTPUT or some method that triggers at the point you select values in first row.
Regards,
Masood Imrani S.

Access the nodes data in a table view (generated by aet).

Hi all ,
I have created a table view in bp overview page.
so it has created new component /ztable/zbol entity .
Now how can i access the nodes of BP page..in the new component created?.

thanks vishal ,
but as per the thread,when we create table view using aet ,
Table view in EHP1 CRM 7.0
You dont need to worry about the component usage nor you need to create or handle anything like that for AET compoent for table extension. SAP has a special way to handle it in WD_USAGE_INITIALIZE of component controller for AET extension generated component so its nothing for us to do about it. Thanks to SAP
so still i need to redefine..or can directly access the nodes in do_prepare_output.?

Ability to query on all columns from a view with multiple tables

I have view with 4 tables. view has about 50 columns.
hypothetically, I want to build a form to give the user an ability to query on any of those 50 columns. user can search on one or more fields.
what is the best way to write the query to retrieve the results without performance impact.
please let me know if the question is not clear.

If you want to permit them to query any of 10 fields with no restrictions, you could create 10 separate single-column indexes. The optimizer would have to try to pick the best of these indexes if you specified multiple search criteria. But since you have a view which presumably means that you've got multiple other indexes involved for the underlying join conditions, you'd probably want/need to combine the column lists of the indexes you're adding for searches with the indexes you've created for joins, which requires looking at the text of the view and figuring out the best way to optimize the 10 single-column searches. Of course, it is possible that the optimizer could chose to do something like a b-tree to bitmap conversion on multiple indexes which could allow it to use multiple independent indexes for your queries, but that's generally not ideal performance-wise.
All this is a fancy way of saying that there probably isn't a cut and dried answer to your question. You need to figure out the queries you're trying to optimize (say, the 10 single-condition queries) and you need to figure out what set of indexes on the various underlying tables provides the best performance weighing those benefits against the cost on other side of maintenance during DML. Which is going to depend on the text of the view, the underlying tables, the existing indexes, etc.
Justin

How to color a table view header's text via css

I have managed to change font-name, background and text alignment of my table view header, but the text-fill line is just ignored! What's the correct way to do this?
Example:
.table-view .column-header, .table-view .filler {
-fx-text-fill: white;
-fx-font-family: "Helvetica";
-fx-font-size: 10px;
-fx-font-weight: bold;
-fx-size: 25;
-fx-border-style: solid;
-fx-border-insets: 0 1 1 0, 0 0 0 0;
-fx-border-width: 0.083333em, 0.083333em;
I also added:
.table-view.column-header.label{
-fx-text-fill: white;
Wich was recommended on a site, but didn't work either..

I think you need
.table-view .column-header .label{
-fx-text-fill: white;
}(with spaces between the class selectors).

No accessory view in custom table view cells.

Similar Messages

Maybe you are looking for