No active master Solution Manager destination maintained. [Maintenance Pack

Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible Maintenance Package
No active master Solution Manager destination maintained. Maintenance Package
Updating license data completed from destination Maintenance Package
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started Maintenance Package
error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
Logon not possible (error in license check)
Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished Maintenance Package
Refresh sessions from destination SM_KSMCLNT001_BACK started Maintenance Package
error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
Logon not possible (error in license check)
Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan B

HI Paul,
Thanks for ur suggestion. I have resolved this issue. now certificates are automatically updated.
But i got the error from maintenance task... for all system.
"RFC error when trying to report license key status back to Solution Manager System SM_KSMCLNT200_"
on report name "/SDF/SAPLLICENSE_KEY_UPDATE"
Kindly advise me..
Thanks,
Manikandan B

Similar Messages

Problem with BI activation in Solution Manager

Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank you

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Automatic activity Enable Solution Manager Usage failed

Hi All,
I tried to perform automatic activity Enable Solution Manager Usage. But it failed. In log I found:
In sm37:
Could you please help me to resolve this issue?
Thanks a lot,
Alexander

Hello Aleksandr,
Below notes describe solution which is the same as yours
2001589 - In Solution Manager Setup step "Activate BW content for RCA" fails with error in InfoObject 0SMD_NOEX
1580108 - Setup Technical Monitoring: Error in BI Content Activation
BR,
K.

Solution Manager (SP 10) Maintanence Optimizer

Hi,
While configuring the Maintenance Optimizer, using the Activity "Activate Integration with Change Request Management" In the 1st activity list "Activate Change Request and Set - up Client by mistake i entered the wrong client id, and now it just doesnt let me change it.
Is there anyway that I can change it?
Also when I click on Maintanence Optimzer button, in Support Package and Stack Inbox I get the following error " Local logical system is not defined ". What does it mean? Is it because of the wrong client ID that i mentioned about above?
Any help on this will be much appriciated.
Thanks,
Vikram

Transcation SPRO
IMG Activity -> Sap Solution Manager -> Initial Configuration ->
Solution Manager - > General Configuration -> Maintain Logical Systems
Define Logical System
Add a unique ID and some name, then assign this logical system to the client you are using for Optimizer in the "Assign client to System.
I would suggest that you also do all the initial IMG activity step by step.

EWA report generation in Solution Manager 7.1 SP12

Hi Friends,
I am done with Managed System Configuration..
Now I need to generate EWA reports for the same.
But I am getting some inputs that, EWA is automatically configured in Managed System Configuration itself.
Can you guys suggest me accordingly..
Thanks & Regards,
Solman Starter

Just start the workcenter and navigate here:
Adding other systems can be done via SMSY ->
You also have to check your SDCCN settings: There must be a Maintenance Package scheduled daily which uses your SolMan system.
I suggest that you flag your RFC to SolMan as master:
(Display/Change)
(Set Master Solution Manager system)

Solution Manager Enterprise Edition upgrade slow

Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?

Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST     400     0024     SAPKITL434     SAP Solution Manager Tool
ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
              To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
            a) In the case of ST-400 SP15-SP17
            To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
            b) In the case of ST-400 SP18 or higher
            The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now

Solution Manager enterprise edition.

Hi, all, How can I check if my version of solution manager is stardart or enterprise edition.
I need that information because in one of the presentation slides of the enterprise service "SAP Modification Justification Check"-
The prerrequisites are.
"Sap Solution Manager Enterprise Edition Must be available". Scope and Architecture of bussiness processes must be documented according to the Minimum Documentation standard.
The solution manager enterprise edition have any special component in system -> status??? or how can i check if i have the enterprise edition of SOLMAN..
Thanks.

Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST     400     0024     SAPKITL434     SAP Solution Manager Tool
ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
              To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
            a) In the case of ST-400 SP15-SP17
            To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
            b) In the case of ST-400 SP18 or higher
            The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now

How to download support packs from solution manager

Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
Regards

Please check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark

Project documentation through solution manager -reg

Hi,
We would like to do project documentation through solution manager
we work on solution manager 2007 with ehp 1
what ever projects we handle like packing for exports etc.. we would like to create them as projects in solution manager and maintain the documentation
request some one to provide step by step guide for the same
regards,
Madhu Kiran

Hi
HAve u seen this
https://websmp210.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
in addition for manual just simply write in Structure tab to create ur folder
Hope it solves ur prb
Regards
Prakhar

Process for applying for Solution Manager Key?

I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager key

Balaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch

Solution Manager Adapter for QC

Hi fellow members,
My query is regarding Solman adapter for QC. I could not locate how to acquire it? I could not get any link on service.sap.com.
If anyone has information regarding how to get this adapter, please do share with me.
Thanks & Best Regards,
Tauseef

Hi Tauseef,
Following are the steps that I have gathered, based on various files available on this subject in service.sap.com
(1) Buy the Adapter software from SAP
(2) Download Set Up documents provided by SAP:
(a) [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp205.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf]
(b) Master Guide SAP adapter for SAP Quality Center by HP|https://websmp205.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]
(3) Identify & Download SAP Notes relevant for this; a few I could come across are:
Note 1109650 - SAP Solution Manager 4.0 Extension Add-Ons
Note 1059350 - Installing SAP Adapter for SAP Quality Center by HP
Note 903274 - Changes to Solution Manager IMG 7.0 after SP01
Note 834534 - SAP Solution Manager roles in Release 7.0
(4) Confirm if the QC version you have and the SAP SolMan version are compatible
SAP Solution Manager 4.0 Service Pack 12 with note ID 1065377 or later
HP Quality Center 9.2 Patch 7 or later
if the Patch is any less in QC, it's available on installation CD anywa that comes along with Adapter, I learn. So, no worries.
(5) Download HP Enterprise Integration module 2.0 Patch 1 for SAP applications by following [this |http://update.external.hp.com/qualitycenter/qc90/sap/enterprise_integration/index.html]link
(6) Obtain your existing QC license from HP, to activate its usage for this Adapter functionality too. For this, send existing SAP Quality Center by HP license file and ask for the addition HP Enterprise Integration for SAP. The license file will then be returned to you with the flag turned on. You can achieve this by following [this|https://webware.hp.com/welcome.asp] link
If your existing QC license was bought not from HP directly but via SAP, you can contact your Account Manager in SAP and enquire how to get this done. I am not sure myself.
...to be continued.
Regards,
Srini

Solution manager Authorization issue

Dear all,
We are maintaining a enterprise solution manager.
we maintain all our SAP clients issues which is posted in our solution manager.
Now the issue is if the clients login in to our solution manager to see the issue status, they are able to see all the clients issues which is posted.
but we want to restrict the authorization not to see other clients issues which is posted in our solution manager.
we want them to see the issues only which is posted by them.
Please give me if there is set of authorization to do this.
Regards
Prakash

HI,
From ur post, I think u have provided authorization to access the tcode crm_dno_monitor. In that case, u cannot restrict him to see all other messages. If u want to restrict the authorization, create a variant with necessary inputs which shows the result ur customer wants to see and assign that to his favourites. Only provide access to call that variant.
Rajeev.

Maintenance Optimizer in Solution Manager 3.2

We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
"Your system administrator must have performed the following Customizing activities:
&#56256;&#56440; Maintain User for Communication with SAP Service and Support
&#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
Your S-User must be assigned to the same customer or corporate number as
the S-User which your administrator entered in the SAP-OSS RFC destination."
We just don't understand the last sentence. You enter an S-User in the SAP-OSS RFC destination in sm59?? Where??
Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
We can access the Maintenance Optimizer, but packages are not visible there. No error is reported. I have the necessary Roles. Are these the correct values?
Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
Any assistance appreciated. Remember, SM 3.2!

Hi,
You can download this to desktop or you can transfer same to server(/usr/sap/trans/EPS/in/)
You have to uncar using SAPCAR.
Also you can directly upload from front-end using spam/saint as well.
Then apply the same using spam/saint.
Let us know if you need any clarification.
Regards

Activated SDCCN on Satellite System not Solution Manager

I activated SDCCN on a satellite system instead of Solution Manager and need to find out how to treat Solution Manager system as the "master system" (basically point the satellite system back to the Solution Manager system).
Also, do I have to activate SDCCN on the Solution Manager system itself? The documentation is vague here.

1] In the satellite system go to tcode: SDCCN
In the menu Goto -> Settings -> Task Specific
In the settings for RFC-Destinations you can choose to which Solution Manager (master) the data will go.
2] If i'm correct, you don't have to activate SDCCN on the Solution Manager. Just create a service in tcode: DSWP (Operations, Solution Monitoring, EarlyWatch report)
(If you get an error session overdue, check answer on this Early Watch Alert Configuration))

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
<i>'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'</i>
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

No active master Solution Manager destination maintained. [Maintenance Pack

Similar Messages

Maybe you are looking for