No activity on smspxe.log and I am not getting very far when testing OS deployment
Hello and thanks for any help. I have a few OS deployment issues.
1. There is no activity on smspxe.log. This has been a problem for two weeks. I believe it is a symptom of trying to fix a bigger issue (#2)
2. I am trying to move us from SCE imaging to SCCM 2012. We had CM working at first but had to switch back. Now when I try to do a PXE boot, I see this message.
Recovery
Your PC needs to be repaired
The Windows Boot Configuration Data file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.
File:\Tmp\x86x64{BBD9AF6-E64E-41A9-840504118DB33B45}.bcd
Error code: 0xc0000098
I have tried these steps - disable PXE on the DP (which is also the MP), remove WDS, I hid the remote install folder, restarted server, installed the WDS role. It wouldn't start so I did wdsutil initialize. Enabled PXE. Maybe important to note; before
this the remoteinstall share was RemoteInstall. Now it is "REMINST".
I have boot images for both i386 and x64.
Thanks so much for any help.
Hi,
You could try the steps in the blogs below(I know that you have tried some steps). Please make sure the RemoteInstall folders have been populated.
Quote:
Go to the Properties of the DP and uncheck the box "Enable PXE support for clients"
Wait for a short time while Windows Deployment Services uninstalls
Reboot the DP
Re-enable PXE support and wait while WDS re-installs
WDS usually requires a reboot so you should reboot again
ConfigMgr 2012 / SCCM 2012 Task Sequence fails with BCD error
Quote:
My initial thoughts were to try and redistribute the boot images but this didn’t work for me. So I removed the PXE role from the DP in question, waited for the success message to appear under the DP monitoring and rebooted the server. After rebooting the
server I enabled the PXE role on the DP, this time leaving Unknown Computer Support enabled. I waited for the success message in the DP monitoring and rebooted the server. After the reboot I made a point of checking the status of the WDS role in Server Manager
(all was well). I also checked the RemoteInstall folder had the same contents as other working DP’s and tried again. Hey presto problem solved!
WDS Recovery Error (BCD) 0xc0000098 SCCM 2012
Note: Microsoft provides third-party contact information to help you find
technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says "feature films and home movies you add to itunes appear in movies in your iTunes library. To play a movie, just double click it". And below are two options for Downloading movies from store and rent movies. Please help.
I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??
-
I use AOL mail and saw a banner for a supported firefox download and I made the mistake of downloading the update. Since I have none of my saved passwords and I do not get a prompt when I enter a site for the choice to save the password. I am looking to change to Google Chrome if this cannot get corrected.
I encountered precisely this problem after the first upgrade to iOS 8, also on a 5s: empty Recents lists, failure to log any calls and a badge showing a -1 (minus 1). It appears to be a problem with corruption of the iPhone backup file, whether backed up to the computer or to iCloud (I tried both). Whether it was introduced by the iOS 8 upgrade process is open to speculation as I'd had no problems with restoring from backup with a couple of prior iOS 7 updates.
Restoring the iPhone to Factory settings solves the problem, but then restoring from a backup re-introduces it. Setting the device up as a new phone is the only way to fix it. Problem is, you lose your contacts and SMS history, unless you've used a third-party app to back them up outside iTunes. If that's no problem, simply do a Factory Restore then set up the phone as new and the problem is gone.
If it is a problem (it was for me), I found two apps that enable you to back up & subsequently restore Contacts & Messages. Syncios is free and worked like a charm for getting my Contacts backed up & restored to the phone. However, it can only back up & restore Messages if the device is jailbroken.
This phone was not JB'd so I had to find another app for Messages: Backuptrans iPhone SMS Backup and Restore. It is $19 for up to 3 devices but was worth it in my case; creates a backup file on your computer that you can restore from after the Factory Restore. Very simple & straightforward.
The photos, apps & music, etc., were easily restored to the phone via iTunes sync.
Hope this is of help to others similarly affected. Must be relatively rare, though, as even the Senior Apple Advisors I worked with had not encountered it before. I made them aware of this thread, FWIW. -
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
All my settings are Apple Pro Rez 422 but when i log and transfer, i'm getting dvcprohd. what's going on?
If your camera shoots DVCPRO HD to P2 cards...like the HVX200, HPX170, HPX500, HPX2000...then it will come in as DVCPRO HD. Only AVCIntra P2 comes in as ProRes. DVCPRO HD P2 comes in native.
-
I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.
It is becoming frustrating to try to get it activated .
I do not know how to get it activated when it keeps informing me that there is no net work connected
Could not sign in please check your network connection and try again.
For both iMessage and FaceTime .
Any radical solution that you have will be appreciated as it is becoming frustrating .First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
Log and transfer will not see contents in p2 folders
This just started happening. Before log and transfer was working great now it won't see
any of the video shot to p2 cards in most of my folders. Every now and then it recognizes and imports actual images into Log and transfer but not from the folders I need. This is really becoming a hassle I now have to go to my slower computer with a older version of final cut 5.04 and transfer using the import function (which works fine) is there any reason why log and transfer won't recognize theses files?I just started having this problem on my laptop. And it has nothing to do with Noise Industries, because I've never had it installed on my laptop.
Same thing, though, with AVCHD files. I shoot them, copy the entire card to an external drive, then L&T from there. Just stopped working. Even cards I've transferred in the past won't load into the L&T window anymore.
Reinstalled software last night and was working again. Came downstairs this morning to start in on another project, and no L&T anymore.
No new software installed or upgraded, it just stopped working. -
I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Username and password do not get applied to WS Invocations in PS3 project
I am running into a situation where username and password do not get applied to WS Invocations in PS3 project I am deploying using config plan, this is used to work correctly in PS2. Did the syntax for the deployment configuration plans for PS3 BPM have changed?
This is the error that I am getting from the BPM soa_server.log file:
<Feb 9, 2011 1:04:16 PM PST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=default, composite=SpringWorkflow, modelObj=ActivityService, policy=oracle/wss_username_token_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss-username-token.
oracle.wsm.common.sdk.WSMException: WSM-00015 : The user name is missing.
Caused by: oracle.fabric.common.PolicyEnforcementException: WSM-00015 : The user name is missing.
at oracle.fabric.common.AbstractSecurityInterceptor.processResult(AbstractSecurityInterceptor.java:239)
at oracle.fabric.common.BindingSecurityInterceptor.processRequest(BindingSecurityInterceptor.java:95)
I enabled ws logging for incoming and outgoing P6 web service requests, I see that the BPM server is not making an outgoing webservice call, looking more into the log file from soa_server.log I see that the exception is a PolicyEnforcementException confirming my suspicion that the username and password from the deployment config plan are not getting applied at runtime. This is used to work correctly in PS2. Any suggestions?
Config-plan:
<reference name="ActivityService">
<!--Add search and replace rules for the binding properties-->
<binding type="ws">
<attribute name="port">
<replace>http://xmlns.oracle.com/Primavera/P6/WS/Activity/V1#wsdl.endpoint(ActivityService/ActivityPort)</replace>
</attribute>
<attribute name="location">
<replace>http://x.x.x.x:7001/p6ws/services/ActivityService?wsdl</replace>
</attribute>
<property name="weblogic.wsee.wsat.transaction.flowOption">
<replace>WSDLDriven</replace>
</property>
<property name="oracle.webservices.auth.username">
<replace>admin</replace>
</property>
<property name="oracle.webservices.auth.password">
<replace>admin</replace>
</property>
</binding>
</reference>
Deployment Log from Jdev:
[04:05:01 PM] ---- Deployment started. ----
[04:05:01 PM] Target platform is (Weblogic 10.3).
[04:05:01 PM] Running dependency analysis...
[04:05:01 PM] Building...
[04:05:11 PM] Deploying profile...
[04:05:11 PM] Updating revision id for the SOA Project 'SpringWorkflow.jpr' to '1.0'..
*[04:05:11 PM] Copying file:/E:/dev/bpm11g/springdemo/SpringWorkflow/SpringWorkflow_cfgplan.xml to soaconfigplan.xml*
[04:05:11 PM] Adding soaconfigplan.xml to archive.
[04:05:11 PM] Wrote Archive Module to E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Deploying sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:11 PM] Processing sar=/E:/dev/bpm11g/springdemo/SpringWorkflow/deploy/sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Adding sar file - E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Preparing to send HTTP request for deployment
[04:05:11 PM] Creating HTTP connection to hostx.x.x.x port:8001
[04:05:13 PM] Sending internal deployment descriptor
[04:05:13 PM] Sending archive - sca_SpringWorkflow_rev1.0.jar
[04:05:15 PM] Received HTTP response from the server, response code=200
[04:05:15 PM] Successfully deployed archive sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:15 PM] Elapsed time for deployment: 14 seconds
[04:05:15 PM] ---- Deployment finished. ----We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem. -
Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart. -
I receive a mail with this promotion: Pick up a Mac or the new iPad by 9/21. Get a gift card for apps.. But I recently bought a Mac Book Pro in a Chicago store, and I do not get an extra credit
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Active substitute maintained for a user is not getting workitems for approv
Hi,
Active substitute maintained for a user is not getting workitems for approval.Earlier he was getting
but now a days he is not getting.
Roles wise also , i checked, it is proper.
Please advise me on this.
Regards,
NitiHi Check Table HRUS_D2 for the user id and cross check it with the users pa record and IT 105.
Also check the email address maintained in su01. And further you can check with the org attrib forward??? is maintained.
I hope this helps.
Saj -
HT1212 After I got IOS 7 my password is changed and I can not get in to my iPad. Can anyone help?
After I got IOS 7 my password is changed and I can not get in to my iPad. Can anyone help?
The following may help http://www.macworld.co.uk/how-to/mac/how-remove-your-apple-id-completely-shut-do wn-your-itunes-store-icloud-other-accounts-3474388/ but note that if you want to sell or give away the iPad you may need a working password to sign it out of iCloud due to Activation Lock. The following has instructions: What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
-
Not getting planning Applications when Log on Work space
Hi Dear Experts,
when log on Workspace to access Planning:
its show showing
Navigate ->Administration->User management
instead if Select Navigate > Applications > Planning
and iam not getting planning Applications when Log on Work space
I have Just Installed Essbase and Planning into my machine .. and i have opened work space area and
and i tried to create first application by using the following URL
http://localhost:8300/HyperionPlanning/AppWizard.jsp
iam getting not able create first application..
can you please guide me how can i work with planing applications..
thanks in advance
KishoreHi Kishore.
From config utility, did you create an instance before trying to access.
I mean "product instance registration" and "data source configuration"
You can find it in the installation doc
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com -
I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www
Keep on talking to Vodafone and keep pestering them until you get a satisfactory answer. Whether you get a 3G signal or not, is entirely the responsibility of Vodafone India because they are your carrier/phone company and nobody here can help you with that on a public user to user technical support forum.
Contact Vodafone as they are the only ones who can help you.
Maybe you are looking for
-
Copa derivation rule for customer group
Hi All, I am currently facing an issue with Derivation rule and hope someone can help me on resolving this.I have created a COPA derivation rule which has field as Source Field company code Plant Target field Distribution channel Condition customer
-
Check whether existing row exist, if does not exist,then insert else skip?
let say, in a mapping , I have a external table and a normal db table , I want to check if current row is similar/exist, if it exist, record row will be skipped and wont be re-inserted again only if it does not exist, then that particular row will be
-
Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.
-
E mail error when trying to send email
I have an application that I want to send an email alert when there is an alarm condition. I have an email VI that works when run outside of my application. When I try to have my application load the VI into a form and run I get the following error:
-
After downloading the latest version of quicktime and restarting, I got a strange problem: Finder won't run and it seems like the, I don't know, desktop won't run. I can't see the items i've got on my desktop, I can't adjust volume or any of the top