No changes in PR after creating PO

Hai,
Once PO has been created,somebody should not change my PR.
Is there any tips for this problem?
please....
With Regards,
Jaheer.

Do you have release strategies in place for your requisitions? If so, you can use standard configuration to lock pretty much every field after the requisition is finally released. You do this in the final release indicator by using FZ03 in the field selection key. You can also customize a field selection key to allow changes to certain fields after the PR is released if you wish.
Regards

Similar Messages

Change material status after creating SO

Hi Guru,
i have created a sales order with material 'DCC001'.
after creating the sales order the STATUS of material 'DCC001' should be 'Sales not allowed'.
but, when i am checking the status of that material, its showing blank in field 'X-distr.chain status' which is in tab 'Sales: sales org. 1'.
Please tell me how can i change the status after creating SO.
Thanks & Regards
Sohel

Please post in correct forum..

System not allow to change PR QTY after create PO

Dear Experts,
I have one scenario after create RFQ & PO no body can change the PR qty.
How can i restrict please guide me.
Regards
Aamir

Use BADI :ME_PROCESS_REQ_CUST
Here with the help of the ABAP person write a code like while saving the PR in me52n system will check in the background if there is any entry against filed EBAN-EBELN...if found then system will throw a customized error.
you can also try out by making message 06-152 as error message.
Regards,
Indranil

How to change CUBE properies after create

Hi,
I am using AWM 102020A, I have created a CUBE and now want to go back and change some of the implementation details , is it possible to change :-
Tab -> Implementation Details
1. Order of dimensions
2. Sparsity checkbox
3. Partition Details
Tab -> Cache
1. Turn on session cache if checked off.
Seems these are locked down after create, how can I change these details.
Thanks for any help,
Brandon

Since you are you using the 10.2.0.2 version of AWM I suppose the database version you are using is also 10.2.0.2 or below.
So to my knowledge the answer is no.
If you are on the 10.2.0.3 version you have some more options because of the integrated sparsity advisor. Then you would have had the opportunity to recreate the cube. I have never tested the actual recreate function, but I've tested the sparsity advisor and saw that I could change if the cube was to be compressed, what dimension to be sparse etc.
Seems like to have to have the 10.2.0.3 version of the database for this to work.
regards Ragnar

Changing doc. type after creating a doc. type.

Hi Friends,
We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
We made Z report for this time ageing report.
Regards,
Sai Krishna

You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

How to change table name after creating page and application

Hi HTMLDB Team,
i have created a application with page where the region use master detail form with table name emp.Now after developing the page and the application i want to change the table from emp to emp2 where emp2 is the table with same structure of existing emp and same field properties.How can i edit the table as emp2 ?
Thanks in advance,
Cheers,
koushik

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

How to change aspect ratio AFTER creating a project

I created a project in FCPX and somehow it's got Black bars on the left and right (i think i created a 16:9 project and put 4:3 clips in). I can't enlarge the clips as they contain text that would be cropped out, so i need to turn my 16:9 project into a 4:3 project. Is this possible?
Regards
Mike

Close your project if it's open by going back to the Project Library view (where you see all your projects). Select the project, open the inspector (command-4) if it isn't already open. At the bottom right of the inspector, click the wrench icon. Change your projects properties and click OK.

How to change appraiser / reviewer after creating the appraisal template

Hi All,
Once the Appraisal template created, if we have changes in appraiser / reviewer, how we can change the new names in the appraisal template in standard (other than T.Code: Phap_admin --> Change header data).
For eg., we have created a document for PERNR 1 on Apr 1st for 01.04.2014 to 31.03.2015 with appraiser as Mr. XYZ, on 01.05.2014 Mr. XYZ left and Mr. PQR replaced that position. In this case, how we can replace appraiser name for PERNR 1 as Mr. PQR in the appraisal template.
Please suggest.
Regards,
Venkat Nagam

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

How to Change Delivery quantity after creating Transfer order

Hi
I created a transfer order for my delivery with LT03. There is already non-ordered quantity in my delivery.
delivery quantity is 5 but transfer order's quantity is 4.
i want to change my delivery quantity without confirming the transfer order.
Is it possible
is there any customization or function for that work ?
in se37, i tried BAPI_OUTB_DELIVERY_CHANGE. it returned the error "there is an unconfirmed transfer order"
Moved to SD froum from LE forum at the request of OP
Edited by: Csaba Szommer on Apr 18, 2011 1:21 PM

If you set "Copy WM quantity as delivery quantity into delivery" for your WH/wm-mvt combination in WM/Shipping interface, the delivery quantity will be always adjusted to the picking quantity ("1" in field V_T3333-WMMUE).
The same can be achieved manually as it was told you by Andrzej.
There's no separate function modul to do this.
When system is processing FCODE "KOMU_T" (manual process) the delivery quantity will be changed in include MV50AF0F_FCODE_KOMU in internal structure "lips":
      IF xlips-pikmg > xlips-lfimg OR likpd-kzebu IS INITIAL.
        PERFORM check_and_set_pikmg_lfimg CHANGING lf_subrc.
        CHECK lf_subrc = 0.
      ENDIF.
But this is one thing, there's some preparation before this step and and the change in "lips" will cause the change of "xlips" later on, etc.
So, it is related to several programs (includes) and forms.
Please contact your ABAPer if you are not familiar with technical things.
Edited by: Csaba Szommer on Apr 18, 2011 10:55 PM

Change the look after creating own composed look.

I have recently been introduced to Sharepoint 2013, i have used the sharepoint palette download to change set colours in an .spcolor file. I have uploaded these and all worked fine however I now dont seem to be able to change the look it just hangs and when
clicking Try this out i get an error message.
I am using Oslo if that makes difference.
I even tried just altered the .spcolor file and replaced it in the Themes folder 15. When I go to change the look the current theme shows the updates in the small preview thumbnail however the page does not.
Does anyone know if this error is becasue ive uploaded my own .spcolor?

I shouldn' think so. I've not looked at the Palette creator tool for a few months but I'd assume that all it outputs is a file containing hex references matching your choices.
Does your deployment do this in site collection that doesn't have your custom palette?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

IMG settings after creating new output type for a purchase order smartform

Hi all,
Do I need to make changes in IMG after creating a new output type in NACE for a purchase order smartform?
I have customized a purchase order smartform according to the requirements and copied an existing output type and assigned the custom form name.
When I am trying to create a purchase order to test it, I am going to the message tab for assigning the output type and if I press F4 on the output type field or if I give the copied output type there, it says output type is not defined.
Do I need to make any changes in SPRO?
Regards,
Anik

Yes. You have to add the new output type to the proper message determination schema.
Go to the IMG and select Materials Management -> Purchasing -> Messages -> Output control -> Message determination schemas -> Define message schema for purchase order -> Maintain Message Determination Schema: Purchase Order.
Select the proper schema, then Control Data and insert your new output type into the schema (eventually with any requirement that may be necessary... you probably want to use 101 like in case of the regular NEU message).
This should do it.

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Need to change status of incident after creating CR

Hi Experts ,
I am creating a CR from my incident as folloow up document from CRMD_ORDER tcode. That is working fine .
After creating CR i need to change the status of incindent to 'CR created" .
Means at the time of creating CR i need to change the status of incident .
1 .Please suggest me where to add code related to update incdent ?
2 . Can i use ORDER_SAVE badi or any other BADI existed for that ?
Thanks in advance ,
Vijay vorsu

Hi Rajiv ,
Thnx for quick reply. I am new to CRM .I understood whats to be done.
I am following these steps :
In my CR action profile i am creating a new action called Z_status_change.
In process type- "permitted process type of action " i am selecting as ' METHOD CALL" .
Next i am clicking on "SET PROCESS' .
Here i am getting problem . When i click on help for on METHOD system is showing existing methods .Here Which method i need to select to change the status .so i thought to create a custom method .
So i created a BADI Z_STATUS_CHANGE and in attributes of BADI i have given filter type as PPFDFLTVAL .
I created implementation for this BADI Z_STATUS_CHANGE_IMP and in attributes in method i have given Z_STATUS_CHANGE .
But if i search in method in process type of action defination i could not see the method.
Is the process i am following is right or wrong ?
If i miss any thing to do pl guide me .
Thanks in advance ,
Vijay Vorsu

After creating a pdf can I change the size of the font when uploading in acrobat and what version?

After creating a pdf can I change the size of the font when uploading in acrobat and what version?

What do you mean by "uploading in Acrobat"?
(Note that if you change the size of text, it won't reflow, so you end up with a mess. Answer is, probably not useful)

HOW TO: Change page size after page is created?

Is there a way to change the size of a page after the page has been created? In the documentation, the only way I have seen to set the page size is in a "with" statement right after creating the document. I have need to change the size of the document after a document has already been created. Any ideas?

Yep, that's how I am doing it. I just wanted to make sure that I was doing it correctly. I need to keep debugging then and figure out what the real problem is. I am new to all of this (obviously) and I just needed to make sure I had the idea correct. I didn't mean to use document and page interchangeably, I understand that you can't have different size pages in the same document.
Thank you for your help.
[FYI]I created a class that creates a document with most of the document settings that I use (e.g. a standard number of pages, non-facing pages, units in inches, etc.) but I don't specify a page size, that's something that varies between documents, so I figured I could just apply that after I have created the page. The problem is, when I try to create multiple documents it doesn't work. The script will create the first document using the default page size settings and I can't get it to change the page size, but then the next document will be created using the page size I tried to apply from the previous document that the script created. I am sure this is totally a coding error somewhere else. I will try to track it down. Just when I think I have this stuff figured out . . .

No changes in PR after creating PO

Similar Messages

Maybe you are looking for