No Context for module while using WinDbg

I would like to request some help with an issue reading a few SQL Server dumps. I'm currently analyzing a dump created by SQL Server 2012 Enterprise. The dump is due to a “Non-Yielding Scheduler” issue that has occurred at least 6 times with
in the last two weeks.
My issue is, I am unable to load the following symbol modules, while using WinDbg.
************* Symbol Loading Error Summary **************
Module name            Error
sqlevn70               No data is available : srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
SQLNCLIR11             No data is available : srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
msfte                  The system cannot find the file specified : srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
XPStar                 No data is available : srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
xplog70                No data is available : srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
Is this a known issue, has anyone seen this issue, and if so is there a workaround to the issue?
Thanks you for your help in advance.
Curtis

Hello,
Please read the following article to analyze further.
http://mssqlwiki.com/2012/08/17/how-to-analyze-non-yielding-scheduler-dumps/
The following fixed have been released about this too:
http://support.microsoft.com/kb/2699013
http://support.microsoft.com/kb/2672531
http://support.microsoft.com/kb/2846378
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Shutdown ports that is not in use for a while using LMS 4.x

Hi,
Is there a way to disable switch ports that has not been in use for a while using LMS 4.x
Your assistance would be much appreciated.
Regards,
Clifton

Hi,
Is there a way to disable switch ports that has not been in use for a while using LMS 4.x
Your assistance would be much appreciated.
Regards,
Clifton

Default security context for signed applets using WinXP+IE8

What is the default security context for signed applets from the internet zone using Java 6 and WinXP+IE8 combination? My guess is that all file and socket access available for the user's Windows account is provided to the applet as well. Is this correct and if so, is there a way to limit these access privileges for signed applets from the internet zone?
This information is surprisingly difficult to find given how security concious people now are using the internet.

AntonBoer wrote:
Thank you for your swift reply.
Unfortunately your answer reflects to my worst fears. Frankly I find this security model naiive. Anyone with euros can get their applet signed so that is no security control at all.The same naive security model applies to just about anything signed and downloaded; not just to Java Applets.
>
Working for a corporate IT how I am supposed to allow Java installations on any of our computers with internet access? That automatically means I am providing them as platforms to whoever wishes to run Java code on them (given that the user of course visits the web site). I would have expected Sun to put more effort into this but it appers nothig have changed in this regard for 10 years.I don't see this as a Sun problem; it is indicative of what I consider to be a general security weakness for all computer systems. For example, for Windows, Vista just added more user involvement in the trust process but it still allows programs to run pretty much unconstrained if the user agrees to them running.
For some time I have advocated a more fine grained approach. I would like to see ALL programs run in a sandbox that a user can specify what and what cannot be done by each individual program. Unfortunately, this would annoy the hell out of most users so it has little chance of every of ever being accepted. The average user just wants a run-and-forget-about-security model.

Profit centre option for vendor while using t code FB60

Dear Sap experts,
I am trying to post a document using the t code FB60 and while defining the vendor account X and the GL account Y, but when the line items are specified in the GL, as the cost element is mandatory, the cost center 130000 is defined, and the profit center 1300 is assigned to the above cost center.
Since, the cost center may differ depending on the nature of the transaction, so will the profit center assigned to the cost center will change, but i would want the same profit center that is assigned to the GL account to be populated { example if i use the profit center 1300 for the GL, same should be populated for the vendor, if i use the profit center 1100, the same should be populated for the vendor}
Since fb60 does not allow you to post the profit center / cost center directly to the vendor account, this is just being little hurdle in arriving at my requirement
Kindly let me know if i may have missed any process or otherwise that i need to follow to meet my requirement.
Thanks
Ganesh.S

it's a bit weird what you are trying to do... the link cost center - profit center is there not to be abused....
whey not use segment or internal order for this?
or use a group of profit centers to build your details.
or cycle or distrubute the amounts on the account.
I believe that the substitution comes after OKB9, you could use that.

I am trying to debug HTBasic code modules while using Test Stand, how do I refresh the subs that have been loaded in memory?

I am writing an application for Test Stand, we are using modules previously written in HTBasic. Whenever I make a change to the code and try to re-run the program, it just runs the old version of the code. The only way to refresh the code is to close Test Stand down and restart it. Is there a way to flush the memory of modules?

Hi,
I haven't used HTBasic with TestStand 2.0.x, but I'm assuming that you have the steps in the sequence set to unload when sequence file is closed (look under the step properties -> run options tab).
If you're still prototypeing, use the File->Unload all modules option. Have a look at page 4-3 in the user manual - it refers to .DLLs, but I'm assuming the HTBasic falls into the same methodology.
Altering the run options from it's default will affect the memory useage and speed of execution of the test sequence. Have a look at page 5-22 (page 158 in the .pdf) in the TestStand user manual - basically, if a code module is loaded into memory already, when the step gets to execute, the loading overhead is already done. If it stays in memory after this, then it's avail
able for next time (quicker second run 'cos it doesn't need to load again. However, the balanceing factor is the sequence is useing more memory at a time, by haveing the module ready.
My usual setting is to use Load dynamically, and Unload after sequence executes. I use this is only during development however, as this is not the most speed friendly, but a compromise so that if I don't call a step I don't load it, but if I do use a step, I'm sure it's free again when I need to modify the .dll modules I create. If you have a look on page 5-7 (143) of the user manual you can set the sequence file to effectively over-ride each step's load and unload settings - useful if you want to revert back again later. If you use this, you'll see that the top two run options for the step are greyed out, but if you set it back with the sequence file options, they do revert back to their original settings.
Hope that helps (and works!!)
S.
// it takes almost no time to rate an answer

Going for dump while using field symbols

Hi all,
   I am using field symbols in my program. Program is going dump for some company codes and working fine for some company codes.
I am confused. Please check this code where the error is shown.
LOOP AT i_final ASSIGNING <fs_final>.
    AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or <fs_final>-wt_withcd = 'XF' OR <fs_final>- wt_withcd = 'WF'.
      MOVE <fs_final> TO wa_final1.
      g_qsatz = wa_final1-qsatz.
      APPEND wa_final1 TO i_final1.
      CLEAR wa_final1.
     ENDIF.
    ENDAT.
    READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
    IF <fs_final>-wt_withcd = 'SF'.
      <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'XF'.
      <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'WF'.
      <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    AT END OF belnr.
      <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
      clear g_qsatz.
    ENDAT.
ENDLOOP.
Please check the code and help me.
Thanks in advance,
Shalem

HI Shalem
Please check this code:
LOOP AT i_final ASSIGNING <fs_final>.
AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or
        <fs_final>-wt_withcd = 'XF' OR
        <fs_final>- wt_withcd = 'WF'.
        MOVE <fs_final> TO wa_final1.
        g_qsatz = wa_final1-qsatz.
        APPEND wa_final1 TO i_final1.
        CLEAR wa_final1.
     ENDIF.
ENDAT.
READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
IF sy-subrc EQ 0.
     CASE <fs_final>-wt_withcd.
     WHEN 'SF'.
          <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
     WHEN 'XF'.
          <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
     WHEN 'WF'.
          <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
     ENDCASE.
     <fs_final1>-qsatz = <fs_final1>-qsatz + <fs_final>-qsatz.
     AT END OF belnr.
        <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
        clear g_qsatz.
     ENDAT.
ENDIF.
ENDLOOP.
Kind Regards
Eswar

How to pass select option value to function module while using service call

Hi,
I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
rgds
sudhanshu

Hi,
Thank s for your reply. In fact im doing similar with following variation:
i) collected range values using get_range* method.
ii) separate low and high values as:
read table <field2> index 1 into wa_range.
vert2_low = wa_range-low.
vert2_high = wa_range-high.
(Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
iii) Now setting these RFC attribute as:
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_LO`
      value = vert2_low ).
and
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_HI`
      value = vert2_high ).
iv) In RFC im having my query as :
select <fld list> from BUT000 into table itab where vertical in r_vert.
Here, r_vert is a range defined as:
ranges r_vert for <fld refrence>
r_vert-sign = 'I'.
r_vert-option = 'BT'.
r_vert-low = S_VERT_LO.
r_vert-high = S_VERT_HI.
append r_vert.
Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
Please suggest.
Rgds
Sudhanshu

How to register for class while using ActiveX

Hi
I am trying to use ActiveX to send an email with Microsoft Outlook. I have found an example Vi. but i was getting an error with code "-2147221164" (Class not registered in Outlook_Mail-1.vi). How to register for that class and what are the files required for that registration.
Attachments:
Outlook_Mail-1.vi ‏31 KB

Here is a picture of the Photosmart eStation:
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Where can I download firefox for windows whils using a linux CD?

My current version of Firefox has become corrupt. When I try to download a new version with Internet Explorer or my current version of firefox it goes to 53% unpacked and then it comes up with file corrupt. I have had the same issue before and have solved it by using a linux CD to download a windows version and it unpacks and installs great. I now cannot find a place where I can specify which version I want and it insists on using the download for Linux which is useless for me.

Thank you for your quick reply. I have downloaded it using UBUNTU Put it onto a different partician and have burnt it to a CD and installed it. Its now working perfectly.

After a tab is loaded, FF keeps the "Connecting" word and graphic(animated circle)after the site has loaded. It doesn't show the sito logo in tab. Reinstalling fixes for a while.Using FF 8 thx

I thought it was flash 11 but disabling this did not fix. Adobe flash does crash a lot, but doesn't seem to be related. If this can't be resolved, can (HOW) I go back to a previous version?

Would you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris

UnsatisfiedLinkError for libdb_java46 while using XML DB

Hi all, I am attempting to run my first DB XML project and examples, I get the following error - (Relevant stack trace follows). Would appreciate any pointers.
java.lang.UnsatisfiedLinkError: no libdb_java46 in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.sleepycat.db.internal.db_javaJNI.<clinit>(db_javaJNI.java:38)
at com.sleepycat.db.internal.DbEnv.<init>(DbEnv.java:264)
at com.sleepycat.db.EnvironmentConfig.createEnvironment(EnvironmentConfig.java:1023)
at com.sleepycat.db.EnvironmentConfig.openEnvironment(EnvironmentConfig.java:976)
at com.sleepycat.db.Environment.<init>(Environment.java:29)
at classical.bol.database.Database.createEnv(Database.java:85)
at classical.bol.database.Database.init(Database.java:48)
at classical.bol.database.Database.<clinit>(Database.java:17)
at classical.bol.database.DatabaseOperation.<clinit>(DatabaseOperation.java:28)
at classical.bol.database.TestDatabaseOperation.testAddRecord(TestDatabaseOperation.java:13)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)

dear krishna,
try something like
SWITCH="-Xmx256m -Djava.library.path=/usr/local/share/berkeley/dbxml-2.3.10/install/lib"
java ${SWITCH} -cp . Main $1
in jour script ( adjust the path to jour build envrionment).
hope this helps
ciao robert

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

Error in CC while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module

Hi,
We are getting an error in CC monitoring while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module for converting IDoc XML to flat file. Below is the error text:
"Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZDELVRY3>: state=READING_FIELD_VALUE_TAG, charPosition=7404, lineNumber=2, columnNumber=7366"
Any suggestion how to resolve it.
Regards
Pravesh

Please check the OSS note below and install the mentioned patch accordingly:
[Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
If it persists, check if are there any mapping errors on the Audit Logs for the failed message.

[svn] 1307: modules: added support for automatically adding " use namespace X", depending on the -target-player value

Revision: 1307
Author: [email protected]
Date: 2008-04-18 16:28:33 -0700 (Fri, 18 Apr 2008)
Log Message:
modules: added support for automatically adding "use namespace X", depending on the -target-player value
* similar to how we add "use namespace AS3"
* symmetric with ASC's -use feature, however we don't have equivalent commandline support yet
Bugs: n/a
QA: Nothing in particular, except for testing the new functionality of -target-player (email me about this)
Doc: Maybe: If we doc about "use namespace AS3" being added to all Flex compiles, we may want to talk about this.
Reviewers: Pete and Erik
Modified Paths:
flex/sdk/trunk/frameworks/flex-config.xml
flex/sdk/trunk/lib/asc.jar
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/BatchCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ScriptCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SymbolTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/MetaDataParser.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/Configuration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/DefaultsConfigurator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtEmbed.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java

Thanks for your attention.
In the above logs, higher resolutions seems to be detected on both screens, hence my surprise :
[ 391.631] (II) intel(0): Printing probed modes for output LVDS1
[ 391.631] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 391.897] (II) intel(0): Printing probed modes for output HDMI1
[ 391.897] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
If it can help here is also my current xrandr output (after having called it manually to use the preferred resolution of each screen)
itanguy ~ $ xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
If needed, I may reboot and provide xrandr output after boot (it will be 1024x768), or could other logs help you ? Please ask...

Forms ERROR - FRM-18107: Failed to load the DE context for the module

I have recently installed Oracle 10g (10.2.0) which is up and running fine (WinXP).
I then installed Developer Suite 10g (10.1.2.0.2).
When I try to open Forms I get the following error;
'FRM-18107: Falied to load the DE context for the module'
I have;
DRIVE:oracle/product/10.2.0/oradb
DRIVE:oracle/product/10.2.0/devsuite
Can anyone advise?
Many thanks in advance.

Hello All,
I would like to know more about the FRM-18107 error. I have tried getting rid of the error by altering my windows environment variable ORACLE_HOME, and going through numerous websites. But still no luck. I am about to de-install Forms 10g rel2 using the OUI. But I plan on leaving oracle 10g database on the system. Hope this will not cause any conflict. Also do I need to do anything in the registry after de-installation of forms 10g.Or is there any order of installation, i.e Do i need to install forms 10g before oracle 10g database.
PLs also let me know if i will need to download any pathch for this to be sorted. But I didn't think so because during installation i noticed a few patches were being put to place as part of forms 10g rel2. Does it still needs a patch for it to work and get rid of the FRM-18107 error? If so, what is the name of the patch and how do i apply the patch. Pls let me know. Any comment on this will be well appreciated and valuable.
Thanks.
Cheers
Aj
Edited by: user9925154 on 25-Feb-2010 14:50
Edited by: user9925154 on 25-Feb-2010 14:52
Edited by: user9925154 on 25-Feb-2010 15:08

No Context for module while using WinDbg

Similar Messages

Maybe you are looking for