No entry was generated in Master catalog after contract upload by PI...

We use CCM 2.0 as percurment catalog in SRM 7.0 server.
1.I finish the basic configuration and tranfer the product catalog to the CCM.
2.Then I do the mapping of product cat to master cat.
3.I finished the PI scenarios for upload contract.
4.When I publish a contract in the potral, I check the PI monitor is fine.
5.I check the CCM log more,but there is a warning message 'No original catalog item found for contract catalog item 1'.
6.The contract upload successfully and it occurs in the ccm cataloags.
7.The log showed that
19.09.2010 16:09:01 (CET): Starting mapping
19.09.2010 16:09:01 (CET): Starting mapping analysis for catalog 4400000049 -> /CCM/MASTER_CATALOG
19.09.2010 16:09:04 (CET): Mapping completed for catalog /CCM/MASTER_CATALOG
19.09.2010 16:09:04 (CET): Mapping completed for catalog 4400000049
But unfortunately,there is no entry in the master catalog for this contract.
Could you give me some suggestion?
Much appreciated~~~

Looks like the catalog was unable to be enriched from existing data - does this contract item exist in the SRM product catalog or a supplier catalog for enrichment to take place?
Regards.
Jason

Similar Messages

Moving Master Images after Facebook Upload

I'm using a fully updated version of Aperture 3 and ran into a problem today moving master images that I have not experienced before. My normal workflow is to batch import images from my camera every few days in one large import, so I often have multiple subjects in every batch. For my 9 months with the program I have always downloaded everything into a temporary holding project I literally call "Hold". When I get the time to do a detailed review, I then delete what I don't want and move (drag) the master images I want to keep from "Hold" into other subject-matter-unique projects across the library. This works for me and has worked flawlessly until today when I downloaded about 20 images. What I did differently today was I took things out of my usual order and decided to quickly upload 3 of the images from the "Hold" folder to Facebook using the Aperture Uploader. The upload went fine, as it has in the past, but the problem surfaced when I then tried to move all the master images out of "Hold" to my permanent library file (project) structure. The 17 images (which were not uploaded to Facebook) moved out to their new projects just fine, as always, but the 3 masters which were the source for the Facebook upload will not allow themselves to be moved out of "Hold". When I drag them to the intended project, Aperture copies them into that project, but the original stays in "Hold." Of course, if I try to then delete what is in "Hold" (with a copy safely filed away elsewhere in the Library) I get the warning that I am attempting to delete a master upon which other versions are dependent (to include "Facebook albums" it says), and all will be deleted.
My take on this is the Facebook upload from "Hold", and the resulting versions created in the Facebook album (far bottom entries on the Library listing), now make "Hold" a permanent home for those associated master images. Is there some way to get around this and actually move the master images to where I want them to be AND to de-clutter the "Hold" folder? Or does this mean any use of Aperture's very handy (at least to date) Facebook uploader permanently glues a master to whatever project it was in when it was uploaded, never to fully and completely move again? Thanks.

I just made a test of this, and can confirm the apparent behavior. However, I examined the Masters folder in the Package of the Library (and I have a Managed Library) and I believe there may be some referencing between Projects taking place. The same appears to result where you have created a slideshow. In the Facebook album and in the Slideshow album, the file info reports the master file name -- in my case the xxxx.NEF file, which clearly none of them really are, but rather some version.
I will try to do a more precise test where I can measure the size of the Masters folder to see if the "Move" adds to its size by an amount equal to the size of the Master file.
Interesting!
Ernie
Message was edited by: Ernie Stamper

IO Error after FileReference.upload()

I was working with FileReference to upload to an server and
the upload was successfully completed, but for some reason I was
getting an IOErrorEvent.IO_ERROR after the upload and the
Event.COMPLETE / DataEvent.COMPLETE do not dispatch.
I found the solution to create an .htaccess file with:
SECFILTERENGINE OFF
SECFILTERSCANPOST OFF
... but my host will not do this.
Is there a way to fix it?
_steffen

Hi Steffen,
I've not seen this problem. Could you please provide a little
more information? What is the backend server platform you're using?
PHP, ColdFusion, ASP, ... ?
Also, have you listened to the HTTP_RESPONSE_STATUS event,
and examined some the status property?
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/HTTPStatusEvent.htm l
-Erica

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.

I am trying to reinstall Master Collection after a computer crash and after download it will not accept the serial number that it lists on my purchased products. The purchase was in 2012.The message says the serial number is invalid. What do I do nest?

Hi there,
Please see help here - https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
If still you are facing problem, I would recommend to reach out to support through the link which is available at the bottom of the support page.
^Ani

How can I update a catalog on my laptop and then transfer the updates to master catalog on desktop?

This is similar to Goeffbubbles question but I don't want to have the original files on both laptop and desktop
Here is the question:
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
Where did I go wrong? I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
Sorry if I am being overly verbose....Any suggestions?

the part you're missing is that you have to be a little more destructive in your creation.
here are my steps:
In LR, put the files you want to work on in a subfolder of your Primary catalog
Export Folder As Catalog with previews, but without including the DNG's
At your new location/machine work on that catalog.
Here's the part that's no fun, (obviously have a backup of your catalog before you do this)
In your primary catalog REMOVE that folder from your catalog. (this will remove all references within your catalog, but leave the RAW files alone where they were)
You then FILE-->IMPORT FROM ANOTHER CATALOG, and import your subfolder export back into your Primary catalog.
It'll bring all of your changes and previews back into your Primary catalog but with unlinked RAW files.
Click on the question mark in the corner of the thumbnail that's telling you it doesn't know where the source files are and LOCATE the original file again in your file structure, with the FIND NEARBY MISSING PHOTOS box checked.
Overly complicated for what it is, but it gets the job done.
I found your post because it was suggested on the sidebar after I just made a feature request on the same topic.

Shipment Document, No Purchase Order & Service Entry Sheet generated

Hi Everyone
We have transportation & shipment module configured in our company.
We are running this process from the last 3 years without any problems whatsoever.
But suddenly from the past 1 month we are facing a very serious issue while saving shipment cost document, i.e *no purchase* *order and service entry sheet* is generated on saving the service entry sheet.
A purchase order and a service entry sheet is generated automatically whenever a shipment cost document is saved. All the congifurations & customisations are correctly done as per sap standards and no request have been moved to production which will disturb the above process.
I have scanned the almost all sdn.sap queries for solutions and have incorporated all the suggestions which will help to solve this issue.
But still the problem persists, i.e still no purchase order & service entry sheet is generated automatically after saving the shipment cost document.
All the settings mentioned below are checked thoroughly.
-- assign puachaging data
--maintain acc. assignment cat.
--automatic G/L acc. determination
--automatic determination of CO assignments
Check the following prerequisites for shipment cost processing has maintained or not
-Shipment must marked as relevant for shipment cost
-Shipment must have the required total status set in shipment cost type
-Shipment must have transportation status planned
-Shipment must have service agent
-Maintainiing and assign shipment pricing procedure to shipement cost
-Maintaining condition records,
Please suggest some solutions to the above issue.
Thanks & regards
satish

Hi Sumit
Thanks for responding
In tcode t_56 generate PO is "C", I.e generate po for a validity of 1 month, the item category settings are the same since as before.
But for some reason the system is not generating any purchase order from the past month.
The error message is shown below.
No purchase order item was generated for shipment cost item 0000014950 000001
Message no. VY633
Diagnosis
You have marked the shipment cost item for transmission to the finanacial accounting department. For this transaction, you need an order item. The system has attempted to create an order item, but has not succeeded in doing so.
System Response
Transmission of data to financial accounting without a valid order item is not possible. For this reason, all items that you have marked for transmission are reset.
Procedure
The log displays further information as to why the system could not create an order, although all the settings in Customizing were configured. You can also create an order manually that corresonds to the shipment cost item and then transmit this again.
Thanks
satish

Weblogic 12.1.1 SSL error --No identity key/certificate entry was found under alias server_name in keystore path\ name .jks on server AdminServer

Hi guys,
I installed webloigic 12.1.1 on windows 2003(32-bit);
I was requested add SSL Configuration to console;
I'm using keytool; It is not first time I setup SSL on weblogic console, only version is different;
before I did susssessfully on weblogic 11g(10.3.2-10.3.5) using the same scenario;
My steps:
1.generate key;
keytool -keyalg RSA -genkey -v -alias <server_name> -keysize 2048 -storepass <pwd> -validity 762 -keystore <name>.jks
2. create cert
keytool -certreq -alias <server_name> -file file_name.csr -keystore <name>.jks
after send and return certificate 3 layers;
imported back;
--root--
keytool -importcert -v -noprompt -alias rootca.kbr.com -file root0.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias rootca1.kbr.com -file root1.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias <server_name> -file root2.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate reply was installed in keystore
[Storing <name>.jks]
confufigured weblogic using conosole;
it looks like this in config.xml file
<ssl>
      <enabled>true</enabled>
      <listen-port>7002</listen-port>
      <server-private-key-alias><server_name></server-private-key-alias>
      <server-private-key-pass-phrase-encrypted>{AES}TIRM5RT26K8IZDevCNMexlWp3BuhZaFpi8HEgPaOCrU=</server-private-key-pass-phrase-encrypted>
    </ssl>
    <listen-address>34.64.3.9</listen-address>
    <key-stores>CustomIdentityAndCustomTrust</key-stores>
    <custom-identity-key-store-file-name>path<name>.jks</custom-identity-key-store-file-name>
    <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
    <custom-identity-key-store-pass-phrase-encrypted>{AES}hiemEGOTrjIRvEOnn0+ODuNpWehBbrgb8fydImfyXV4=</custom-identity-key-store-pass-phrase-encrypted>
    <custom-trust-key-store-file-name>path<name>.jks</custom-trust-key-store-file-name>
    <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
    <custom-trust-key-store-pass-phrase-encrypted>{AES}xzP2kU98nkVMNLdzMv7VRoRjoBQUTu5jjtlMLm87PHc=</custom-trust-key-store-pass-phrase-encrypted>
</server>
When I restart SSL , I see error in log file
Er<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1381506732875>
<BEA-000297> <Inconsistent security configuration, weblogic.management.configuration.ConfigurationException: No identity key/certificate entry was found under alias <SERVER_NAME> in keystore path<name>.jks on server AdminServer>
Please help
I thought before if import certification get status Certificate reply was installed in keystore
it shouldn't be problem for weblogic use thsi certificate;

Compare your steps with the following
http://weblogic-wonders.com/weblogic/2011/05/25/ssl-configuration-for-weblogic-server/

Empty schema in master catalog

Hi,
I just did the basic setup CCM 2.0 on WAS 7.0
Now I see the master catalog has no standard schema yet.
I read this willl be generated the first time it gets edited, but it is not.
Is this right, and do I have to build this schema on my own, or is there a initial upload available anywhere?
Regards, Toine.

HI,
As already identified by Masa you must create the schema yourself either directly in the catalog (not recommended) or use either XML or CSV uploads. Please see the help documentation for details on schema file creation:
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
Also - I have attached a simple test csv file for you to load to your catalog to get you started.
Regards,
Jason

CCM - Publishing Master catalog gives short dump and terminates publishing

Hello Experts,
we are implementing SRM 5.0 with CCM 2.0 in SP08.
When we tried to publish the master catalog in CCM. we are getting the following error.
FYI..
i ran /CCM/initialize_cme once.
Checked TREX it is working fine. (checked with reports as well)
Your help will be greatly appreicated.
Thanks, Renga.
-========================================================-
Data type 4688C4C9FE4702CE00000000AC140239_ 0000000001 does not exist
Data type not found
Data type not found
Unable to initialize the characteristics/data types (catalog /CCM/MASTER_CATALOG)
Error when generating catalog /CCM/MASTER_CATALOG
Catalog update was terminated
Error when generating catalog /CCM/MASTER_CATALOG
Publication in target system was discarded
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_PACKAGING_SERVICE==CP, include: /CCM/CL_PE_PACKAGING_SERVICE=
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, include: /CCM/CL_PE_REQUEST_SERVICE===
07/03/2007 13:45:01 (EST): Catalog publication was started
Publishing catalog /CCM/MASTER_CATALOG for the first time
Publication will only be local
Maximum package size (catalog items): 5000
07/03/2007 13:45:02 (EST): >>> Start: Publication of catalog model
07/03/2007 13:45:03 (EST): Data types published; 25 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Characteristics published; 35 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Schemas published; 1 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Categories published; 313 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): >>> End: Publication of catalog model
07/03/2007 13:45:03 (EST): >>> Start: Publication of catalog content
07/03/2007 13:45:03 (EST) ************ Start Applications Log for Package 0001 *******************
07/03/2007 13:45:03 (EST): Package 0001 is being transferred to Update Manager
07/03/2007 13:45:03 (EST): Package 0001 is being updated locally
Catalog update was terminated
07/03/2007 13:45:05 (EST) ************* End Applications Log for Package 0001 ********************
07/03/2007 13:45:05 (EST): Package Nr. 0001 was sent
07/03/2007 13:45:01 (EST): system is waiting for response messages
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for package 0001
Local update of package 0001 has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for package 0001
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for catalog
Local publication of catalog /CCM/MASTER_CATALOG has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for catalog
07/03/2007 13:45:05 (EST): End of catalog publication
Total runtime of catalog publication: 00:00:04 ***
-========================================================-

Hi
<b>Please go through the SAP OSS Notes below -></b>
Note 866547 Error when accessing TREX server
Note 878316 - Missing standard characteristics in CCM2.0 catalogs
Note 910814 Lowercase letters in ID
Note 734168 - Error during initialization of characteristics & data types
Note 730047 CME-Customizing check
Note 937756 Runtime improvement when using view rules
Note 933796 Timeout while publishing using parallel processes
Note 904420 Tolerating inconsistencies in the view relationship
Do let me know.
Regards
- Atul

Unable to Map Contract Catalog to Master Catalog

Hello,
We currently use CCM 2.0 with SRM version 5.
Our issue is that when items are added to a contract catalogue and released, the contract releases successfully but errors appear in the upload logs advising u2018It is not possible to retrieve the data types for catalog **********. Catalog update was terminatedu2019.
The contract catalog then has a red light against so we are unable to map the contract to the Master Catalog.
The issue appears to be intermittent as we have had some go through successfully.
I have checked the following:
SXMB_MONI u2013 shows as successfully processed
SLG1 u2013 shows no errors
/CCM/D_CTLG_REQ u2013 there is no entry in the req_sender field
/CCM/D_UPD_STATE u2013 the status is 02 u2013 completed with errors.
Iu2019ve seen a similar issue posted with the advice to run /CCM/CLEANUP_DIS_PERSISTENCY, however I havenu2019t ran this before and would like some advice on the impacts of doing so before I run it in our Production environment.
Can anyone provide some information on why this issue could be occurring and what I can do to resolve the issue?
Many Thanks
Lisa

Hi Lisa,
Such an error normally means the catalog is corrupted, you can run the cleanup_dis_persistency report in the hope that it can repair the links but it is doubtful, it is more likely that you will have to delete this contract catalog and then re transfer the contract to CCM again before mapping to the master.
Regards,
Jason

Problem in publishing master catalog

Hi,
I am not an SAP expert. I would like to ask your help about our current issue at hand. I need to publish the master catalog but I dont know how to do it. We have installed SRM 5.0 and CCM 2.0. Can you give me a detailed steps on how to do it? And also, i dont know how to create nor upload a schema. The only type of schema that the system may accept is in csv format because xml format will be applicable because it is a stand-alone system. It is not integrated yet to EP or XI.
Hoping for your apt reply. Thank you.
Regards,
Charm

Hi
<b>Please go through the following details, which will definitely help -></b>
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D6093BB73ADE10000000A114B54/content.htm
https://websmp105.sap-ag.de/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://help.sap.com/saphelp_srm50/helpdata/en/e5/f5e938b4ece075e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/01/2ee339a327f136e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5d/4cacb2fe20430aa0e4666be4fe1d5e/frameset.htm
Problem with publishing catalog in another language
Re: Master catalog schema.......
Catalog item not found during publication master catalog
The Master Catalog in CCM is never manually created by an administrator, the catalog is generated upon entering the CDC (Catalog Design Center) {Edit Catalogs}. Providing the CCM system has been initialized using the report /ccm/initialize_cme the catalog will be automatically generated as described above, even if deleted upon next entry to the CDC a new Master will be created again.
Regards
- Atul

How to delete and create the CCM MASTER CATALOG in Catalog Content?

Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
Any help provided will be really appreciated.

Hi,
Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
Regards,
Jason

(CCM2) Error when edit Master Catalog

Hi,,
I have one problem
Hi,,
I have two problems with the catalog
1.- After I uploaded some content in a supplier catalog, I was not able to do any mapping. I think the problem is in the master catalog. Now suddenly I can't edit it. A error message is displayed. I saw the dump in the system but I don't see any SAP note related.
the message say
"RAISE_EXCEPTION" C
"SAPLSYGU" or "LSYGUU03"
"GUID_CONVERT"
or                                                        "SAPLSYGU" "PARAMETERS_ERROR"                             or                                                        "SAPMHTTP " "PARAMETERS_ERROR"
Our level of patch is
SAP_ABA     640     0015     SAPKA64015
SAP_BASIS     640     0015     SAPKB64015
PI_BASIS     2005_1_640     0005     SAPKIPYJ65
ST-PI     2005_1_640     0003     SAPKITLQH3
CCM     200_640     0002     SAPK-26402INCCM
SRM_SERVER     500     0008     SAPKIBKS08
Thanks

You should check if you have two different master catalogs in your CCM system itself, not only in your web frontend (e.g. Internet Explorer). One master is probably active and one master is set to inactive. Delete the inactive master and you are able again to do the mapping between supplier catalog and master catalog and to edit the master.
@ R.Janke: Independent of the problem in this thread. Is it really necessary to publish the master schema only? In case you want to work with purchasing catalogs you wouldn´t publish your master catalog at all. Is your proposal related to any SP or is it already solved with a new SP?
Regards,
Bodo

No entry was generated in Master catalog after contract upload by PI...

Similar Messages

Maybe you are looking for